Used Pressta Eisele Automatic Screwdriving Machine for sale (75,375)

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 4867, Pressta Eisele Stamping Machine HE 40 S Price: 2,000 Euros Kdjdpfx Afsy Tizkeujn

Condition: excellent (used), Year of construction: 2017, Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table Ksdpfx Asy Naz Tjfuedn - hydraulic lock for reversing the resistance unit

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Kdjdpfxjqzmnus Afuen Operating instructions etc. available, further technical data on request Machine was in operation until dismantling Further technical data on request or see photos

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Kjdey Dtpmopfx Afuedn Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, ■ Punching machine, complete with base frame Kdedpfxoy Hriwo Afusn ■ Hydro-pneumatic drive ■ Operated via foot valve ■ Max. stroke length: 40 mm ■ 25 double strokes/min. ■ Max. installation height: 250 mm ■ Throat depth: 130 mm ■ Throat depth with rotary table: 90 mm ■ Table top height: 950 mm ■ Ram force: 90 kN at 10 bar

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 P EU shipping approx. €350 Kjdpsl Skl Ijfx Afusdn

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Specification: - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm Kdsdpfx Aey Nm Erofujn - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm - Operation via switches and 4 hand levers

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations Ksdpsyyxxfefx Afuedn • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Year of construction: 2019, condition: excellent (used), functionality: not functional, Compact hydraulic C-frame punching machine with 160 kN punching force for precise applications on smaller profile cross-sections. The torsion-resistant frame design ensures accurate punching in aluminium, steel or plastic. Kdsdpfxsy Agqno Afuon

Year of construction: 1996, condition: used, Hydropneumatic operation Kdedsyxpw Njpfx Afuen Punching force: 50 kN Work hub: 35 mm Overhang: 110 mm Installation height: 140 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1015, profiles with dimensions (HxB) up to 100x195mm, 80x200 mm automatic work cycle driven by a 3 kW/400 V, 2850 rpm motor cutting disc d=450x3.8x40mm, z=110 horizontal and vertical material clamping on the feed side dosing spray system horizontal material clamping in the feeder moving both clamping jaws when retracting (prevents scratching of the profile) Kdjdewgmv Sspfx Afuon infinitely adjustable hydropneumatic cutting disc feed cutting disc exiting from the rear length of cut sections adjustable in the range of 0-300mm (with reversing device 0-600 mm) setting the cutting length by a handwheel with a mechanical counter maximum width of the cut profile 200 mm cutting range (height x width) 100x195mm, 80x200mm automatic shutdown when material runs out possibility of connecting a dust extractor

Year of construction: 2009, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Material stop adjustable with detent points and display on the display Program control for automatic adjustment of the punch height, the angle, and the punching height Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Kdodpfeywtqdjx Afuon coolant lubrication

Condition: used, Year of construction: 2001, Hydropneumatic operation Profile height: 210 mm under hold-down Kdodpfx Afoyu Rztouen Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 2009, Hydraulic operation Profile height up to 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Kdjdpfx Afoyu Rw Ijusn Weight: approx. 450 kg

Condition: used, Year of construction: 1998, Hydropneumatic operation Profile height: 180 mm under hold-down Max. insertion height: 145 mm Kjdpfx Afoyrrddousdn Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 1995, Hydropneumatic operation Kdedpfx Aeyrrbvjfusn Profile height: 180 mm under hold-down Max. insertion height: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: excellent (used), Year of construction: 1995, As-new notching milling machine from a training workshop Kdjdpfx Asyrh Rgjfujn Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2006, condition: good (used), for processing aluminium and PVC profiles in facade and structural construction Mitres in 3 planes, also suitable for use as a compound crosscut saw Processing of profiles up to 300 mm width at 90°, sharp mitres up to 30° Notching depths horizontally up to 185 mm and vertically up to 230 mm at 90° Notching width at 90°: 300 mm, profile height up to 280 mm Motorised height adjustment for notching, positioning with electronic digital display Kdsdpfxjyz T A Ue Afuen Saw blade swivel range vertical 60° - 90° - 25° (front/centre/rear), motorised positioning with electronic digital display Saw blade swivel range horizontal with vertical blade 45° - 90° - 45°, motorised positioning with electronic digital display

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° up to 280 mm Kdjdpfx Afjyz Tqrjuon - Notching width at 30° up to 100 mm - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual Kjdpfx Asyz S Trefuodn - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Condition: used, Year of construction: 2011, Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Abutment height: 150 mm Kdedpjynalusfx Afuen Weight: approx. 400 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, overall weight: 380 kg, Dimensions (W x H x D): 950 x 800 x 1150 mm Weight: 350 kg Operating principle: hydropneumatic Operating pressure: pneumatic, 6 to 8 bar Air consumption: 10 liters per stroke Pressing force: 35 kN at 7 bar Air connection: R 1/4" Kodpfx Afeyl R T Djuedn Punching stroke: 20 mm Return stroke: 100 mm Max. punching height: 120 mm Max. profile height: 120 mm

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 5,50,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Kdsdsvtarnepfx Afusn Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display.

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Kdodpfxew Inuds Afujn Max. profile height: 100 mm Weight: approx. 280 kg

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Type: AKF 250 Motor: 400V 2.2kW Speed: 2800 rpm Cutter diameter: 250 mm Cutter arbor diameter: 40 mm Milling width: 300 mm Milling depth: 85 mm Profile height: 160 mm Weight: approx. 150 kg Dimensions (W x H x D): 950 x 1450 x 930 mm Kdjdpfxsygdf As Afuen