Used Roll Forming Machine: Corrugated And Tile Profile Sheets for sale (77,697)

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Gjdpfsyurx Tjx Ap Dekc Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, bending force (max.): 42 t, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending force: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Ram stroke: 300 mm Ram width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions and weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Unladen weight: 1,000 kg EQUIPMENT Gjdpfx Apoz Nipce Dokc Documentation CE marking

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM Gkjdpfx Apsxya Hze Djc MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 56 kW (76.14 HP), coil weight: 10,000 kg, A high-performance profiling line (roll forming machine) T153 for the production of sheet metal profiles (153 mm) is for sale. Year of manufacture: 2022 Condition: Excellent (practically new equipment). The machine has only undergone minimal operation – it has processed a maximum of 50 tons of material. Main advantage: The line is completely set up, connected, and ready for immediate testing. You don’t have to wait months for delivery from the factory, nor spend large sums of money on commissioning and adjustment. The equipment is ready to be integrated into your production immediately! ⚙️ Technical specifications: Material thickness: 0.7 – 1.5 mm Line speed: 8 – 12 m/min (high productivity) Main motor: Powerful 18 kW x 2 drive Gksdpfx Asy Uzzfep Djc Hydraulic unit motor: 5.5 kW Overall dimensions of the line: Length 50 m x Width 2 m x Height 1.2 m 📦 Complete line assembly: - Coil unwinder: Designed for heavy coils up to 10 tons, motor power – 11 kW. - Profiling machine T153: Main forming unit. - Automatic stacker: Length 12 m, power 4 kW (enables the automation of receiving and storing finished long products, which significantly reduces personnel costs). 🔥 Why this is a beneficial offer for your business: Minimal wear and tear: Processing only about 50 tons is considered test operation for machines of this class. You are buying a practically new machine at the price of a used one. Ready for testing: The equipment is currently connected. You can bring your own material, start the line, and personally verify the perfect geometry of the finished profile. Fast start: The machine is located directly in the Czech Republic, and it is ready for dismantling and shipment. No lengthy international paperwork or customs duties. 📍 Location: Hradec Králové, Czech Republic. Upon request, we will gladly provide additional photos and a video of the machine in operation. Call or write to inquire about the price, dismantling, and shipping conditions. We will be happy to answer all technical and organizational questions!

Condition: used, Year of construction: 2012, For sale: a four-roll CNC-controlled rolling machine, VBM 2000 / 130. The machine is used, has seen little operation, and is in very good condition. It is currently operational and can be inspected and tested on-site. The four-roll rolling machine from the Italian manufacturer PARMIGIANI is designed for precise sheet metal rolling and the production of cylindrical and conical parts. The four-roll construction ensures high accuracy, rapid workpiece positioning, and efficient operation. Technical specifications: Manufacturer: Parmigiani Model: VBM 2000/13 Year of manufacture: 2012 Made in: Italy Type: Four-roll rolling machine Control: CNC Working length: 2050 mm Maximum pre-bending thickness: 3 mm Maximum rolling thickness (for sheets with Kr=40kg/mm2): 4 mm Diameter of center rolls: 130 mm Diameter of side rolls: 140 mm Overall length: 3300 mm Overall width: 900 mm Overall height: 1200 mm Table height: 950 mm Main motor power: 3 kW Motor power for raising the rolling roll: 1.1 kW Gsdozd T N Dopfx Ap Djkc Working speed: 5.5 m/min Pre-bending speed: 140 mm/min Supply voltage: 380 Volts Frequency: 50 Hz Weight: 1900 kg Hydraulic drive Industrial heavy-duty construction Suitable for forming cylindrical and conical products Application: Ideal for the production of metal structures, tanks, containers, pressure vessels, ventilation systems, and other metalworking products in the energy sector. If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Light Gauge Steel structures Steel frame houses Prefabricated buildings Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge Gksdpfx Aozrt Ivsp Dec The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Servo punching Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility

Condition: new, Year of construction: 2026, functionality: fully functional, SHEET METAL BEADING MACHINE ETB 40 – METAL TECHNICS POLSKA PROFESSIONAL SHEET METAL BEADING MACHINE The ETB 40 Sheet Metal Beading Machine is a robust and efficient machine designed for producing beads, grooves, flanges, reinforcing ribs, and other forming operations in sheet metal. Thanks to its heavy-duty construction, high precision, and a wide range of interchangeable forming rolls, it is ideal for metal fabrication workshops, HVAC duct production, sheet metal processing, and general industrial manufacturing. The machine enables fast and accurate production of repeatable profiles, improving productivity while maintaining excellent quality. KEY FEATURES • Maximum sheet thickness: 4 mm • Powerful 2.2 kW electric motor • Heavy-duty steel construction • 300 mm throat depth • Precise material guidance • Suitable for a wide variety of beading and flanging operations • Quick and easy roll replacement • Ideal for HVAC, tanks, enclosures, and steel fabrication • High manufacturing quality • Machine available from stock TECHNICAL SPECIFICATIONS • Model: ETB 40 • Maximum sheet thickness: 4 mm • Roller width: 165 mm • Throat depth: 300 mm • Roller speed: 15.3 rpm • Motor power: 2.2 kW • Dimensions (L × W × H): 1550 × 510 × 1180 mm • Weight: 341 kg APPLICATIONS The ETB 40 is ideal for manufacturing: • HVAC ducts and fittings • Air-conditioning components • Cylinders and tanks • Machine enclosures • Decorative sheet metal components • Flanges, reinforcing beads and stiffening profiles • Components for the automotive and steel fabrication industries HEAVY-DUTY CONSTRUCTION The machine is built on a rigid welded steel frame, ensuring excellent stability, high precision, and long service life even under intensive industrial use. EASY OPERATION The ergonomic design and intuitive controls allow fast roll changes and quick machine setup for different forming operations. This makes the ETB 40 suitable for both small workshops and high-volume production. TRANSPORT & TECHNICAL SUPPORT We organize machine transportation throughout Europe as well as to countries outside the European Union. Every transport quotation is prepared individually based on the delivery destination. We provide professional technical advice, warranty and after-sales service, and ongoing technical support from our specialists. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. WHY CHOOSE METAL TECHNICS POLSKA? For many years, Metal Technics Polska has been supplying high-quality metalworking machinery to customers across Europe. We provide complete support—from technical consultation and machine selection to transportation, commissioning, and long-term after-sales service. If you would like to receive a quotation or learn more about this machine, please contact our sales team. Visit the Metal Technics Polska website to explore our complete range of sheet metal working machines and discover our latest products and promotions. Gjdpfxszkubzj Ap Dokc

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Gsdpfx Apefnk Ehe Dekc Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Gkodpoq U N T Refx Ap Dec Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping * 2 × Bosch motor, each 18.5 kW Profiling stands * Number in scope of supply: 16 pieces * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft Gksdpfx Apezzyd Ns Dec * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Special straightening device * 16 gearboxes * 16 profiling stands * 2 Bosch motors, each 18.5 kW * 32 universal joints

Condition: new, Year of construction: 2026, functionality: fully functional, HawkTech LC-5005 – Pittsburgh Lock Machine for HVAC Duct Fabrication The LC-5005 forms the Pittsburgh lock seam on square and rectangular HVAC duct components. With 7 pairs of vertical forming shafts (each with left, middle, and right rolls), the profile is gradually formed, resulting in a clean and consistent seam. The upper section automatically adjusts to sheet thickness via a double-head stud and disc spring – no manual readjustment is needed during normal operation. Multiple lock profiles and combinations can be produced (Pittsburgh lock, drive cleat, and more). Compact and lightweight (360 kg) with a small footprint, the machine is easy to move, simple to adjust, and reliable – ideal for on-site duct fabrication as well as workshop use in industrial plants, hotels, and shopping centers. Technical data: Model: LC-5005 Gedpoy Swnpefx Ap Dskc Motor power: 2.2 kW (Y100L1-4, three-phase) Voltage: 220 / 380 / 415 V (reversing switch QX1-13N1) Sheet thickness: 0.5 – 1.2 mm (drive cleat rolls: < 0.8 mm) Forming shafts: 7 pairs, 3 rolls each Dimensions (L × W × H): 1,520 × 630 × 1,010 mm Weight: 360 kg Scope of delivery: LC-5005 Pittsburgh lock machine Set of Allen keys (5, 6, 8, 10, 12 mm) Operating manual (CZ/EN) Quality certificate

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. Gkjdozt Ni Eepfx Ap Djc The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: good (used), Here are the official specifications of your *BPR CP30* – 30mm spindle: It is a small but very versatile machine. Capabilities for mild steel: *Manufacturer's data for BPR / Eagle CP30:* - *Flat bar to flat bar:* 80 x 15 mm max - *Flat bar on edge:* 50 x 10 mm (to be verified, but standard on CP30) - *Round tube:* 60.3 mm x 2 mm (2-3/8" x .062") - *Square tube:* 38 mm x 3 mm (1-1/2" x .120") - *Round solid bar:* 30 mm max Gkedpfx Aszwg Rzsp Djc - *Square solid bar:* 30 mm also - *Gas pipe / Pipe:* 1"1/2 Sch 40, i.e. 48.3 mm - *U-channel:* 50 x 25 x 5 mm - *Angle iron:* 40 x 40 x 5 mm (external) / 35 x 35 x 5 mm (internal) d019775a *Technical specifications:* - Spindle diameter: 30 mm - 2 drive rollers (the lower 2) - Bending speed: 8.5 m/min - US speed: 12 feet/min - Weight: 210-247 kg depending on version (yours is 187 kg on the plate = older, lighter version) d019 In short, it is perfect for standard locksmithing/metalworking.

Condition: used, machine/vehicle number: 313/5, Channel folding machine, folding machine, folding former, seam locking machine, folding former, sheet metal bending machine, profiling machine Geded Sikfepfx Ap Djkc -Number: 14 pieces rolls -various: versions -Recording: Ø 28 mm -Price: complete -Weight: 22.5 kg

Condition: used, machine/vehicle number: 313/5, Channel folding machine, folding machine, folding former, seam closing machine, folding former, sheet metal bending machine, profiling machine -Rolls: 20 -Distance rings: 14 -Executions: different Gjdpfx Aod R N Icsp Dekc -Take: Ø 28 mm -Price: complete -Weight: 21.4 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine MODEL M3035 , year 2024 machine as new with warranty included Planetary dual pre-pinch plate prebend SPECIAL FRAME WITH TOP ROLL REDUCED SIZE 300 MM TO ACHIEVE SMALLER BENDING DIA 330 MM Performance Capacity: Plate width 3000 mm Gkjdpjy Tbf Isfx Ap Doc plate thickness rolling 22mm pre-bend 20 mm minimum rolling diameter ID 330 mm usefull surface width on the rollers 3100 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine to agree on request nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: new, Year of construction: 2025, Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. So our customers can save money on purchasing additional equipment and renting additional production areas. Gkedsf Epzcopfx Ap Doc There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process with the lock forming machine LFM. After the process of locks forming are finished it’s necessary to put single hem lock into Pittsburgh lock and close it with a hummer or special Pittsburgh lock closing machine. After those procedures ventilation element is ready It’s very easy to work with our ventilation lock former machine LFM, because there are ruler guides so they help you to put metal in necessary forming position. Lock former machine LFM can be 380V (1.5kW engine power) or 220V (1.1-1.5kW engine power) depends on customer’s preferences. The machine is suited to work with color-coated metal sheets or stainless steel. We have been producing lock forming ventilation machines since 2008 year. So we have ready solutions for you to be the first Dimension: 110.00Sm x 51.00Sm x 100.00Sm Weight: 300.00Kg Maximum metal thickness: 1.2mm

Condition: used, Year of construction: 2003, Used for the production of door liners by thermoforming. Year of manufacture: 2003 General Maximum roll diameter: 1200 mm Maximum roll width: 850 mm Minimum roll width: 570 mm Sheet loading height: 1750 mm Sheet feeding height: 1750 mm Discharge height of thermoformed product: 1750 mm Machine overall dimensions: See layout drawing Roll Unwinding Station Sheet loading: Manual Roll change: Automatic (pneumatic) Sheet pulling: Motorized Heating Station Gkedpfszumnzex Ap Djc Format change: Motorized Format change stroke length: 500 mm Oven emptying in emergency: Automatic (pneumatic) Upper panel radiators: 134 × 300 W + 45 × 600 W Upper panel radiator power: 67,200 W Lower panel radiators: 112 × 600 W Lower panel radiator power: 67,200 W Forming Station Moving level of the mold holder Maximum stroke of pneumatic cylinders: 750 mm Closing force of pneumatic cylinders: 687.5 daN × 4 Clamping Ring Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders at 6 bar: 735 daN × 2 Pre-Stretching / Cooling Dome for Thermoformed Product Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders: 687.5 daN × 2 Electric fan power: 0.55 kW × 4 Vacuum System Pump capacity: 240 m³/h × 2 Pump motor power: 5.5 kW × 2 Tank capacity: 1200 L × 2 Pneumatic System Operating pressure: 6 bar (±10%) Air intake connection: Water System Operating pressure: 2.5 bar (±10%) Water intake (flow to chiller, closed-loop connection): DN ½" Temperature: 15°C (±10%) Electrical System Three-phase electrical voltage + neutral + earth: 400 V (+10% / -6%) Frequency: 50 Hz Installed power: 280 kW Current: 465 A Roll feed thermoforming machine currently used in the manufacture of refrigerator door liners. Thermoformer comprises: Roll Unwinding Station. Heating Station - Upper and lower pre-heaters and heating elements. Forming Station - Table closing force of daNx2: 735. Clamping Ring. Pre-Stretching / Cooling Dome. Vacuum System. Pneumatic System. Full workshop manuals. Machine footprint of approximately 10m x 3 m x 5m.

Condition: new, Year of construction: 2026, total width: 550 mm, total length: 2,320 mm, total height: 1,000 mm, input voltage: 220 V, working width: 300 mm, spindle motor power: 750 W, power: 0.75 kW (1.02 HP), overall weight: 410 kg, Equipment: CE marking, New Misirli seamless rain gutter roll forming machine (portable) for producing seamless gutters on site or in the workshop, directly from metal coil. Supplied new by the authorised Misirli sales and service partner in Sofia, Bulgaria. The machine forms aluminium, pre-painted steel, galvanised steel and copper coil into a U-section rain gutter, cut to any length the operator needs – no joints along the run. Technical data Godpfx Apoz Dqubo Dskc - Coil (strip) width: 300 mm - Material thickness: 0.40 – 0.60 mm - Materials: aluminium, pre-painted steel, galvanised steel, copper - Production speed: 10 m/min - Drive motor: 1 HP (0.75 kW), 2800 rpm, chain and gear drive - Power supply: 220 V AC, 50–60 Hz (single phase) - Machine dimensions (L x W x H): 2320 x 550 x 1000 mm - Weight: 410 kg - Forming rolls: solid, CNC-machined, hard-chrome plated Quality and compliance: CE marked, built according to the Machinery Directive and Low Voltage Directive, electrical equipment tested to EN 60204. All parts are manufactured in-house on CNC machines; spare parts are kept in stock. Larger versions also available: 330 mm strip (420 kg) and 370 mm strip (0.50–0.60 mm, 1.5 HP, 2860 x 730 x 1160 mm, 500 kg). Demonstration in Sofia possible.

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: HEB IPE section bending roll, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, shaft diameter: 200 mm, roller diameter: 650 mm, bending radius (max.): 1,000 mm, pipe diameter (max.): 250 mm, overall weight: 27,000 kg, input voltage: 3,80,440 V, input frequency: 5,060 Hz, Equipment: CE marking, documentation/manual, emergency stop, hardened rollers, Profile bending roll hydraulic model AR200, year 2008 make MG Italy Capacity bending chart and photos in enclosed Godpfxoz Dkr Hj Ap Dskc -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. -electric 30 Kw on the hydraulic power unit- voltage 380/50 -Digital position readout on the bending rolls -Manuals and schematics all available along with the machine. -Machine delivered in working condition. CAPACITY CHART IN ENCLOSED MG MODEL AR200 SECTION BENDING ROLL

Year of construction: 2025, condition: like new (used), Ulma VTI 640 Technical Specifications Model: VTI 640 Condition: Like new (fully functional) Year of manufacture: 2025 Performance: Up to 20 packs/minute (depending on film and product characteristics) Type of packaging: Flow pack Features ✅ Wash Down IP 66 design for hygienic applications ✅ Machine suitable for laminated film ✅ Machine prepared for MAP (Modified Atmosphere Packaging) ✅ Forming tube for bag width 300mm ❌ Label dispenser ✅ Printer Videojet 6330 ✅ Signal for printer / labeler ❌ Double film roll holder ✅ Automatic film centering Gsdpfx Apjz Ru Rbs Djkc ✅ Quick-change system for film with vacuum adhesive table and cutter ✅ Squeegee for controlling the pack volume ✅ Synchronization signals for upstream and downstream equipment ✅ Inclined discharge conveyor ✅ Volumetric pneumatic filler with 200 – 300 liter tank Documentation & Operation Language (documentation & HMI): German (other languages available upon request)

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel Gksdpfx Aszzkvpop Dsc touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site.

Year of construction: 2023, condition: new, We offer brand new roll former automatic line for corrugated metal sheet production. Depends on customer preferences we can produce line for 10, 20, 35, 44 or 57mm profile high. Some of lines we have ready on stock. Line is equipped with electric uncoiler up to 10t coils, roll forming part, cutting shear, sheet stacker for 10m length. Also we produce customized roll forming lines, metal tile lines, cut-to-length lines, slitting lines etc. Gksdpfjkhaadex Ap Doc To get more information about our machinery please contact our sales department

Condition: new, Fully automated machines for the trapezoid roll forming, in various sizes. Please, contact us in order to receive further information as well as the technical documentation. Gjdsyr Nkbjpfx Ap Dekc

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale. Gkodpfxoz Nhlio Ap Doc