Used Round Log Sorting Line for sale (14,404)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Nwodpfjxf Up Uex Aqvjg Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, One simple combi sorting line with 10 band pockets and a capacity of up to 40 pieces per minute. Nwjdoxyaivopfx Aqveg

Condition: used, Small log line with Chipper-canters and single blade splitsaw Feeding / sawing speed 60 m/min. The line consist of below parts: - Conveyor for logs - Centring infeeder with log turner - First chipper-canter for round logs - Out feed conveyor - Block tilter - Infeeder to second canter - Second chipper-canter for blocks - Out feed conveyor - Single blade splitsaw Nwedjiiciqepfx Aqvjg We can also offer the equipment serviced

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Njdpjxa Excofx Aqvswg

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file Nwsdpfxexa Ettj Aqvjg - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: good (used), log sorting crane sorting wagon Wolf RSZ 300/12,5 year of construction 1979 with crane Jonsereds type: LONG-JON with crosscut saw with crosscut saw Nwjdpfx Aqsg T S E Toveg with tongs with rails with cable has run to the end, cylinder of gripper belongs sealed Location: Germany, near Passau Visit also my other advertisements. I look forward to your inquiry.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: PG20240001, total height: 910 mm, overall weight: 110 kg, total length: 830 mm, total width: 830 mm, type of input current: three-phase, workpiece weight (max.): 45 kg, tank capacity: 60 l, usable tank capacity: 15 l, input voltage: 400 V, workpiece width (max.): 160 mm, workpiece height (max.): 160 mm, outer diameter: 160 mm, workpiece length (max.): 160 mm, inner dimension height: 245 mm, inner dimension width: 280 mm, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, warranty duration: 12 months, empty load weight: 110 kg, load capacity: 60 kg, Vibratory finishing machine for universal use for deburring and polishing. Suitable for small parts and series. Vibra-Line B60M circular vibrator with 60 l. Volume. The machine is coated with 20 mm. PU coating (polyurethane). Nsdpjvgagxofx Aqvswg With a capacity of 60 litres, the work bowl can hold up to 15 litres of workpieces and approx. 45 kg of sanding medium, depending on the design and size of the individual parts. The basic model of the ‘Vibra-Line B60M’ is equipped with a control cabinet with mechanical timer and process time control.

Condition: excellent (used), Year of construction: 2015, Complete Cheese Production Line – High-Quality, Semi-Hard Cheese This fully integrated production line, including controls and electrical systems, was engineered and designed by Asepto Germany and constructed by ASTA Eisman Germany in collaboration with Schwarte. The line features Siemens S7 controls and color touchscreen HMI operation panels for precise and user-friendly operation. Installed in a factory that was not yet fully operational, the line has seen minimal use from 2015 to 2023, primarily for demonstrations, ensuring excellent condition and longevity. Nodpfjxnyr Hsx Aqvewg • Year of Manufacture: 2015 • Cheese Weight: 4–5 kg and 10–12 kg • Cheese Types: Semi-hard varieties, including Gouda, Edam, and similar This production line offers a ready-to-use, reliable solution for high-quality cheese manufacturing with minimal additional setup required.

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Nwjdpjk Eakvjfx Aqveg Electrical data: -230 V -0,7 A -50 Hz -IP 65

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz Nodpfx Aelatz Deqvewg - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2026, Optical precision drill grinding Nwsdpfe R R R Sex Aqvog High-precision and very easy-drill grinding with optics and , Costsaver and Swiss in 100% quality. grind drills, thinning and check in the shortest time and with maximum precision. With MEGA POINT blue line you win more than once, achieve with it: - Better positioning - Improved accuracy of diameter - Significantly longer service life - Feed force is greatly reduced The MEGA POINT blue line is a versatile precision drill grinding machine, which is easy and ergonomic operation and a variety of drills handelsueblichen nachschleift perfect and optimized. MEGA POINT blue-line 1-20mm (Optiom to 30mm) Technical specifications: Our MEGA POINT drill grinding allows precise and rapid regrinding and thinning all handelsueblichen drills. Our customers have so always perfectly ground drills for disposal. The sophisticated design provides enormous flexibility in terms of the different cut angles and the thinning of the drill. Without a doubt, the world's best conventional drill grinding! Technical specifications Drill material grinding HSS and carbide HSCO Point angle adjustable 80 ° - 150 ° optional tip angle adjustable up to 180 ° Chuck with collets for drill diameters from 1 to 6.5 mm Chuck with collets for drill diameter 7 - 20 mm optional Spannzangenset for drill diameter 20 - 30 mm Average / free angle adjustable 0 - 40 ° Ausspitzvorrichtung, Ausspitztiefe adjustable CBN grinding wheel double-fine / coarse D 125 mm optional DIAMOND grinding wheel (for carbide drills) D 125 mm CBN grinding wheel for thinning D 50 mm x 4 mm Engine power 0.3 kW Spindle speed 2800 r / min Power supply 230 volt 50 Hz Dimensions (L x W x H) 50 x 50 x 50 cm Weight about 42 kg Standardausfuehrung For right- and left-cutting, two- and dreilippige drills. With built-in optics (10x Zoom) separate Ausspitzvorrichtung and: 1 Machine light 2 chucks with collets D 1 -6.5 mm and D 7 - 20 mm 1 CBNDoppel grinding wheel D 125 mm fine / coarse 1 CBNSchleifscheibe D 50 x 4 mm 1 Set of service tools 1 instruction manual with spare parts list 1 CD-ROM with manual (CE Declaration) Danger: OPTIMA / TATAR Parts BERGER technology will take over on January 1, 2016, the stock of spare parts of HighTech OPTIMA AG. We can now offer genuine spare parts and service for the OPTIMA and TARTAR Boherschleifmaschinen.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, Standard equipment red line Optical precisions drill point grinding machine for 2 fluted drills regrinding and point splitting in one chucking diameter range 2 to 16 mm (1 to 20 mm as option) point angle 80° - 150° infinitely adjustable cutting angle 0° - 20° infinitely adjustable relief angle set to 30° incl. complete electrical instalation with single phase electrical motor 0,3KW 115V 60Hz (or 220V 50Hz) and integrated power-supply for illumination of the optical system incl. built-in optical projection system with 10 power lens (zoom lens with 6 - 20 power as option) incl. integrated point splitting device incl. one precision collet holder and one set of double-tapered precision-collets of your choice (MP 16 for drill-dia. 3-16 mm, MP 6,5 for drill-dia. 1-6.5 mm or MP 20 for drill-dia. 6.5-20 mm) incl. 1 double sided grinding wheel dia. 125mm CBN (one side coarse [grit ~100] second side medium [grit ~200]) Nsdpfsbrpr Usx Aqvswg incl. wheel guard with connection system for vacum cleaner incl. 1 each of detailed operating manual with pictures, spare parts list, CD-Rom and CE-Declaration (on demand)

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Nwjdpfx Aqjx Up Igsvsg Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Nwsdjuzn Nnspfx Aqveg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: excellent (used), operating hours: 20 h, CATALOG NUMBER 7874 – Manufactured in Poland - Excellent condition – only 20 operating hours – Original documentation DTR + CE – Additional knives included – Additional bushings included: 18mm, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29mm - Knife setting tool included - Used machine, original paint (not repainted) Technical specifications: - Diameter of produced dowels: 180–300mm - Max. diameter of raw wood before processing: 380mm - Max. allowance for machining: 40mm per side - Min. input material length: 1100mm - Knife head drive motor: 55kW - Stepless feed speed adjustment + forward/reverse: 1.5–8 m/min - Feed motor: 7.5kW Configuration: - 8 toothed infeed driven rollers - 4-knife cutter head - 6 smooth outfeed driven rollers - 7 pneumatic hold-downs - Additional bushings included - Additional knives included Nodpfx Aqey Nztkjvjwg - Operating pressure: 6 bar - Electric cabinet dimensions (LxWxH): 900x400x1600mm - Machine dimensions (LxWxH): 4100x1650x2300mm - Weight: ~4000kg Net price: 199,900 PLN Net price: 47,600 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Year of construction: 1990, condition: used, We offer a used technological line for the production of ceramic products (Handle/Keller) characterized by exceptional durability and ease of maintenance. This line consists of the following machines and equipment: 1. Raw Material Pre-processing Machines - Edge Runner Handle R469, year of manufacture 1955 - Roller Crusher AGW 1065/1085, year of manufacture 1963 - Roller Crusher WF 1080A, year of manufacture 2005 - Belt Conveyors, 4 units - Control cabinet 2. Forming Machines - Mixer Handle MDVG 920B, year of manufacture 1990 Nwsdpfsy Nzprex Aqvog - Press Handle PZG 56A/50, year of manufacture 1990 - Cutter Keller type 4155, year of manufacture 1990 - Belt Conveyors, 4 units - Control cabinet This line was in continuous operation until the end of 2025. If you have any questions or require further information, please contact us by phone.

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) Formats: 250 ml – 1000 ml Application: Hot-fill and cold-fill beverage production Container types: Glass bottles and PET bottles (hot-fill) Filling temperature: 10°C – 104°C CO₂ capability: Yes Closures: Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off PET: 38 mm 3-start hot-fill closure Labelling: Cold glue paper labels (optional sleeve labelling available) Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones Bottle dryer | Europool | - | 2007 | High-speed air dryer Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt Conveyors | KHS / Krones | - | - | Complete conveying system Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial Pallet labeller | Logopack | - | - | Pallet labelling system Reverse osmosis system | MWT | - | - | Capacity 800 l/h Njdeyx I Awopfx Aqvswg

Condition: excellent (used), Baljer & Zembrod roundwood handling, sorting, transport and sawing vehicle - German production - measuring the length of the wood - automatic cutting cycle TECHNICAL PARAMETERS: - max log diameter 1000 mm - crane reach max 9200 mm - crane working angle 225" - rotating head 360 " - lifting capacity: 2000mm - 2560kg Nsdpjlimriofx Aqvjwg 7240mm - 1680kg 9200mm - 1330kg - dimension of the hauler 6000x2150 mm - hauler with two-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic stroke of the guide - manual and automatic operating mode - log lifting - integrated sawdust extraction 2.2 kW - drum for winding the cord Transport dimensions 12.5x2.4x2.4m weight 12000 kg

Condition: ready for operation (used), Wurster & Dietz round timber intake station with singulator and block chain conveyor with ejector. Nwodpfx Aqoyxrtaeveg

Condition: used, Year of construction: 1997, Overview  This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrapping, pallet labelling Scope of Delivery  Carton erector | CERMEX | F37 | 1999 | Formeuse de carton Bag‑in‑Box filler | OETTEL | A 4001 | 1999 | BIB filling machine Checkweigher | PRECIA MOLEN | X241‑DCKW | 1999 | Weight control Carton closer | CERMEX | C642.41 | 1999 | Carton closing Carton conveyors | ANDUZE |- | 1998 | Conveyor system Labeller | VIDEOJET | APL 210 LH | - | Carton labelling Palletizing robot | BEMA | - | 2017 | Fanuc robotic palletizing system Stretch wrapper | BEMA | Silkworm LS | 2017 | Stretch wrapping unit Pallet labeller | LOGOPAK | - | 2023 | Pallet labelling machine   Nsdpfxsymr U Es Aqvjwg

Condition: excellent (used), Year of construction: 2010, Automatic technological line for sawing wood Technical data: - Max wood diameter 400 mm - Minimum wood diameter 120 mm - minimum timber length 1500 mm - Max log length 3200 mm CAPACITY UP TO 200 m3 per shift The machine consists of the following elements: - Log loader - Sawmill longitudinal feeder - Sawmill TT 5/600/400 G - Motors 75 + 90 kW Nwsdpfolar Risx Aqveg - Receiving roller table with ejecting mechanism for edgings and side boards - Driven roller table - Base table SB 4000 - Multi-saw WP 210 - 2 x 75kW engines - Receiving table - Lower return conveyor of edgings, waste to the chipper The machine is in good condition, in continuous operation - the possibility of viewing during operation

Condition: excellent (used), Automatic filling line Logdos Späth GmbH Type K-DOS.F/AL 40/ EX for filling liquids into buckets, hobbocks, IBC and drums EX protected Nwjdeiyytqspfx Aqvjg mobile, movable on rollers compact dimensions : 3m x 2m x 2m (LxWxH) programmable X/Y axis and pallet pattern Very good condition, directly from production!!!

Condition: excellent (used), USED Benier bread rounder. Nwjdjgtikvjpfx Aqveg We have 2 such machines. EXTERNAL DIMENSIONS (in cm): - W: 140 - L:100 - H:190 TECHNICAL DATA: - regulated gutters, - rounding weight range: 50-1500 g. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Linear feeder / Vibratory feeder / Sorting device Vibratory linear feeder, vibratory hopper, dosing hopper, storage hopper Nedjxf Urvjpfx Aqvswg Vibratory bowl feeder, bowl feeder Vibratory bowl, screw feeding system with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Year of manufacture: approx. 2000 Useful load: approx. 1.5 kg Oscillation frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W = 170 x 60 x 12 mm - Mounted track length 340 mm - Overall height with base plate and oscillating plate approx. 115 mm Required space L x W x H: 400 x 280 x 400 mm Weight: 9 kg Good condition

Condition: excellent (used), functionality: fully functional, I sell a complete square of raw material imported from Germany and available for pickup in Osla near Boleslawiec. Manufacturer: Holtec + Falcone Germany, Range of processed diameters: from 14 to 65 cm Range of processed lengths: from 2.0 mb to 15 mb In the price of the sorting plant a very large stock of spare parts, i.e. chains, reducers, motors, cables. The raw material yard consists of: - Long timber feeder - 2 x Feeder for short timber, - Kesla brand crane at the feeding table for leveling the raw material on the table, Njdpjvcqi Asfx Aqvowg - Complete operator station (cameras, monitors, computer), - Sorting plant system operating software, - Scanner of the amount of sorted raw material, - Falcone 550 debarking machine from 2014, - Dripping saw, diameter 1600 mm, - Metal detector, diameter max 650 mm - Single boxes: 44 pcs. - Bark removal system from under the debarking machine - Removal system for waste generated during dripping. - Automation control , full optimization based on the set parameters . - Line capacity: up to . 300 000 m3 per year in two shifts