Used Schanbacher Sanding Machine for sale (65,082)

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Knsdezbyt Espfx Anioc Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1996, I sell the widebelt sanding machine OTT MEGA TR11, year 1996. Kodpfx Anoywrzboijnc Configuration: Hard rubber calibrationcylinder Combi unit rubber cylinder + pneumatic jumping pad with segment control. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Sensitive adjustment of pad position. Pneumatic adjustment of pad and cylinders pressure position. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 1999, Double-sided, multi-purpose edge sanding machine with oscillation and 200mm sanding height Ksdez I T Apspfx Anienc Langzauner LZK 4-S with veneer edge sanding side and solid wood sanding side 200mm sanding width Motorized sanding belt oscillation, therefore no compressed air connection required Drive motor 400V / 3kW Front work table for sanding veneer edges with grooved stop guide (for veneer overhang) Veneer sanding device with fine adjustment, foldable Spring-loaded table, adjustable in height and can be moved to the side Angle stop Rear, adjustable work table for sanding solid wood Both tables are height-adjustable to utilize the sanding belt Belt dimensions 3000 x 200mm Side extension table for radius sanding on the 150mm belt roller Feed stand holder 68mm Central dust extraction connection 140mm Very stable chassis, 2 swivel casters, 2 steering casters, and lever brake for locking CE marking All graphite pads and extraction hoses have been renewed Original paint, only touched up in places Excellent condition from a small restoration workshop Some sanding belts are included Dimensions approx. 1800 x 1000 x 1250mm (LxWxH). Weight approx. 650kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse; see "other offers from this seller".

Condition: like new (used), functionality: fully functional, Sanding unit with shoe pneumatic oscillation feed speed adjustment via variator: 5–30 m/min maximum working height: 100 mm Kodpozz Nlcofx Anionc minimum working width: 10 mm machine width: 2000 mm machine height: 1900 mm power supply: 380 V year of manufacture: 1999

Condition: excellent (used), Year of construction: 2022, With the RFM 320 model, BARTH offers a sanding machine that enables the quick and efficient creation of chamfers up to 16 mm wide in a single pass, while ensuring the highest sanding quality. Short setup times ensure that even individual pieces can be manufactured in a time-saving manner. The RFM 320 features a sanding belt oscillation system with pneumatic belt cleaning. Standard equipment for the RFM 320: Adjustable sanding tool for 8 radii (2, 3, 4, 5, 6, 8, 10, and 12.5 mm) Chamfer sanding device up to 16 mm wide Sanding belt oscillation with pneumatic belt cleaning Integrated base for feed unit 16A socket for feed Dust extraction port Ø 80 mm Chassis with 2 steerable, lockable wheels Workpiece support, 380 mm extended width Pre-milling unit 1,100 W / 220 V Continuously variable speed up to 25,000 rpm Milling range up to a radius of 12.5 mm CE Installation dimensions L x W x H in mm: 1,600 x 690 x 1,010 Weight: 207 kg Includes many NEW sanding belts Note regarding used machines: • Subject to errors in technical specifications and prior sale. Knjdsz Uhgdepfx Anioc • The stated prices are ex-works prices, collection only – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: used, Technical data: - Conveyor belt width: 150 mm Knedpfxszryw Ro Anijc - Motor: 3 kW - Weight: 490 kg

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Knodpfewyda Uox Anioc Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: good (used), Code: 0494 Brand: DM ITALIA Model: 410 Automatic calibrating sanding machine with abrasive roller for wood, carpentry shops, furniture, custom-made furniture, windows and doors, panels, and various items - CE Standard Technical data: Max sanding width 405 mm Max sanding height 80 mm Min sanding height 2 mm Roller rotation speed 1440 rpm Belt feed speed 0 to 3 mt/min Belt length 2420 mm Belt height 78 mm Fixed table dimensions 850 x 410 mm Single-phase motor (220 V): 1100 Watt Overall dimensions mm 1000 x 850 x 1100 h Weight kg 90 Kedez Izg Aspfx Anionc

Condition: used, Jet EHVS-80 cs lightweight edge sander for the precise sanding of straight and curved wooden edges. Its lightweight construction and powerful motor ensure a uniform finish with high material removal rates. Ideal for small joinery workshops, furniture making and interior fit-outs. Technical data: Kjdozryxhspfx Anionc - Sanding belt length: 2260 mm - Sanding belt width: 150 mm - Table: Swivelling - Motor power: 1.5 kW - Extraction connection: 100 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: VO995, total length: 1,700 mm, total width: 1,000 mm, total height: 1,150 mm, table length: 880 mm, table width: 370 mm, overall weight: 260 kg, power: 2.2 kW (2.99 HP), grinding width: 150 mm, grinding length: 2,580 mm, Machine type: LVO 120, Machine number: VO995, Year of manufacture: 2009, Main motor: 2.2 kW, Oscillating motor: 0.11 kW Ksdpfoy Nznuox Anijnc

Condition: used, overall weight: 1,500 kg, workpiece length (max.): 2,500 mm, workpiece width (max.): 190 mm, workpiece height (max.): 200 mm, grinding belt length: 1,800 mm, grinding belt width: 200 mm, transport length: 2,650 mm, transport width: 1,100 mm, transport height: 2,000 mm, Equipment: CE marking, documentation/manual, No. 04555 Double-sided sanding machine LÖWER DSM 2000 Used For sanding both sides of wooden workpieces in a single pass 2 belt sanding units, top and bottom Max. workpiece width 190 mm Max. workpiece height 200 mm Max. workpiece length 2500 mm Sanding belt width 200 mm Sanding belt length 1800 mm Sanding belt speed 1300 m/min Sanding motor power 2x 5.5 kW Sanding motor speed 2870 rpm Feed speed 6 / 11 / 16 m/min Workpiece feed via conveyor belts Motorised height adjustment Height adjustment motor power 0.37 kW Digital workpiece thickness display Sanding belt oscillation Pneumatic sanding belt tensioning 2 brushing units, top and bottom Brush diameter 120 mm Brush length 190 mm Knodpfx Anjz N Ixcsioc Compressed air operating pressure 6 - 8 bar Dust extraction connections 2x Ø 150 mm and 2x Ø 120 mm Required extraction airflow 2515 m3/h Minimum air velocity at the extraction connection 20 m/s Negative pressure at the extraction connection 889 Pa Electrical connection 400 V / 50 Hz / three-phase Required on-site fuse rating 32 A CE marking Technical documentation including operating manual available Transport dimensions approx. 1600 x 1500 x 1800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Used Machine Year of manufacture: 1988 Features and technical specifications: - Length of work tables: 1440 mm - Total width of the two work tables: 710 mm - Tilt adjustment of the work tables: 0–30 degrees - Operating pressure: 6 bar - Sanding belt length: 2170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10–20 m/sec - Vertical adjustment of the oscillating unit: 125 mm Ksdpfozk Ny Esx Anijnc - Air consumption: 25 NL/min - Electrical specifications: 400 V / 2.9 kW Weight: 490 kg Availability: available shortly Location: Röllbach

Condition: good (used), Year of construction: 1997, Manufacturer: MABO Model: BABY S.A.S. BABY 80 Machine type: Edge sanding machine Technical Data Distance between rollers: 1,050 mm Knedpfx Ajxgvcxsnijc Max. sanding belt width: 120 mm Number of speed settings: 1 Main motor: 1.1 kW Sanding belt horizontal Sanding belt tiltable Vertical upwards Weight approx.: 95 kg Space requirement length: 2.65 m Space requirement width: 0.55 m Space requirement height: 1.1 m Location: from stock 54634 Bitburg - Immediately available -

Condition: excellent (used), possibility of sanding on the shoe or flat surface mechanical oscillation feed speed adjustment via variator electric adjustment of the aggregate up/down sanding belt height 150 mm table angle adjustment possibility of sanding curved elements total motor power 5.7 kW year of manufacture: 1994 power supply 380V Knodpfxey N Ry Ho Anisc

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Year 2006. Configuration: 11 KW steel cylinder 11 KW hard rubber cylinder soft rubber cylinder Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Knsdpfx Ajxtxhkenioc Total weight 2400kg 2 motors 11 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm Kjdpfowzzivex Anijnc - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions Kjdpfjt Tqy Eex Anienc drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Ksdpfey A D Ecsx Anijnc Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: used, Year of construction: 1991, EDGE SANDING MACHINE LZK 4: Langzauner edge sanding machine LZK Machining and sanding of all types of wood, also in combination with plastics Year of manufacture: 1991 Knedpew A Aa Eefx Anisc Motor power: 3 kW Belt speed: 22 m/sec Belt dimensions: 3000 x 200 mm Table size: 1250 x 350 mm Height adjustment range: 200 mm Extraction port diameter: 110 mm Minimum air speed: 20 m/sec Extraction capacity: 700 m3/h Total weight: 450 kg Total connected load: 3.2 kW Operating voltage: 3 x 380 V 50Hz Required space: 1900 x 900 mm All technical data and information as per brochure

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Knodpoitvkujfx Aniec Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: used, Year of construction: 1997, Belt width: 150 mm Belt length: Table size: Veneer sanding unit: yes Oscillation: yes Tilting table: yes, 0°÷ 45° Knedsyffxzepfx Aniec Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Machine width: 800 mm Weight: 530 kg

Condition: used, Model making machines Kodpowhqxaefx Anienc Including over 100 canvas belts Including approx. 30 15 mm belts, approx. 30 30 mm belts, approx. 10 40 mm belts Including 11 profile sanding rods Used, excellent condition, little used Make: Zimmermann Type: PS 1 Belt length: 2700 mm - 2710 mm Extraction connection diameter: 80 mm Space required: approx. 1000 mm x 600 mm x 1800 mm Weight: approx. 400 kg Storage location: 97447 Gerolzhofen, free on freight, unpackaged Sold in the current condition, as seen, without warranty or guarantee

Condition: good (used), Code: 0449 Brand: DE STEFANI Model: MV 1 Kedszmyp Aopfx Anionc Automatic single-head edge sander for wooden edges and profiles, solid wood, veneered and various Sander for profiles and rebates with interchangeable pad, tiltable -15° to +90° 2-speed motor rpm 710/1420 – Hp 1,3 – 2,5 Working height mm 100 Automatic feed with variable speed Adjustable inlet guide Compressed air 6 atm Exhaust outlet diameter 100 mm Overall dimensions mm 2100 x 1600 x 1350 h Weight kg 950

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 01810, 7 Face grinding supports 2 Top chamfering tools 2 Bottom chamfering tools 1 Water groove milling support 1 Milling support Infeed and outfeed roller conveyor Belt running direction: left to right Knedpfjzy Eh Rex Aniec Water trough

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Knedpfx Anoy H N Tmsisc Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee