Used Schiess 25 Dke 250 for sale (20,576)

Condition: good (used), Year of construction: 1987, Control: Siemens 8-M X-axis travel: 10,500 mm Y-axis travel: 5,000 mm Z-axis travel: 1,250 mm W-axis travel: 1,250 mm Iajdpfx Asyrb I Esn Djr Spindle diameter: 225 mm Spindle taper: SK 60 with adapter for SK 50 Spindle power: 100 kW Spindle speed: up to 750 rpm Spindle speed multiplier 1:4 = 3,000 rpm Spindle torque: 18,000 Nm Ram cross-section: 460 x 550 mm Feed rate: 4 m/min Rapid traverse X/Y: 5,800 mm/min Rapid traverse Z/W: 4,800 mm/min The machine is supplied without clamping plate and without table.

Condition: used, faceplate diameter 1800 mm Iasdpfeyuqcksx An Der turning height 1600 mm turning diameter over bed 2150 mm turning speeds 3,15 - 250 U/min voltage 400 V

Year of construction: 1987, condition: used, 4 pcs. rope pulleys for counter weight of a FB 225 Iasdpfxod Ig Uye An Der

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Iasdpfx Anowzvxrj Djr Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 61,440 h, functionality: fully functional, machine/vehicle number: 06800003891, rotational speed (max.): 5,000 rpm, controller model: Siemens 840D powerline, Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Max. speed: 5,000 rpm MACHINE DETAILS Control: Siemens 840D powerline Electrical Data Apparent power: 50 kVA Rated current: max. 72 A Current: 80 A Mains voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Voltage: 24 V Operating hours: approx. 76,300 h Spindle hours: approx. 61,440 h EQUIPMENT Pallet circulation system Material conveyor belts for machined parts Chip conveyor Iedpsyzqtkofx An Djar Documentation/manual Note: The machine is sold without chuck, tools or raw part holders. Additionally, the seller can offer the following accessories: SMW KNCS225 chuck for €1,500 Ewab pallets (base pallets) 10 units for €500 Extension of transport belts for finished parts €2,000 Basic holder set VDI 40 suitable for the machine, 10 units for €1,000

Condition: excellent (used), Year of construction: 2006, Universal 5 axis Machine Center DMG DMF 250 Linear Year Mfg 2006 Heidenhain iTNC530 control Ijdox Nmllspfx An Doar Travel X2,500 Y920 Z820mm NC Rotary Chuck _ Hoffmann (A axis) NC B axis -105 ~ 105 degree (Spindle Head) NC C axis 360 degree ATC 30 magazine Spindle 18,000rpm Spindle Taper BT40 Direct Measuring X,Y & Z axis Special Offer

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Isdpfxjy Dqiwo An Djar Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, ARBURG 420C 800-250 with the sprue picker anvil+long leg Year of manufacture: 1999 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core pull control Injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Iaodpfey Dqcdox An Dor Price: Upon request

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 with the Wittmann W721 robot Year of construction: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Injection pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Original mold crane Robot Wittmann W721 Year of manufacture: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Ijdpfx Aney Dqbyo Djar Travel in axes: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Iodpfx Anjy Dqbts Dsar Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of manufacture: 1999 injection unit: Screw diameter: 35 mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Iajdpfxsy Dqa Ae An Dor Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Euromap 12 Robot interface Core pull control injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2005, Arburg 320K 700-250 with the side robot Arburg Multilift H Year of manufacture: 2005 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : clamping force: 70 t tie bar distance: 320x320 mm size of clamping platens: 476x476 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Air valve x 3 Control with hot runners injection unit hardened - bimetal Central lubrication Dimensions: Weight: 2350 kg length/width/height: 3.37x1.45x1.99 m Iajdpoy Dp U Ssfx An Dsr Drive: Pumps/motor: 15 kW Heating power: 6,1 kW Total power: 21,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Isdpoy Dp Ulefx An Djar Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Iajdpfx Aoy Dp Ncon Djr Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Iaedpoy Dp E Dofx An Dor clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), functionality: fully functional, power: 30 kW (40.79 HP), fuel type: diesel, empty load weight: 4,965 kg, Year of construction: 2012, operating hours: 8,173 h, Equipment: air conditioning, cabin, gripper hydraulics, hammer hydraulics, rubber tracks, Mini excavator TAKEUCHI TB 250 Year of manufacture: 2012 According to hour meter: 8,173 operating hours 29.6 kW 4,965 kg - Hydraulic quick coupler CW 10 - Including bucket as shown in the photos - All hydraulic lines on the boom - Full cab with heating and air conditioning - Work lights - Nice original condition Iaodpfx Aoy Dpbfon Dsr - Very good tracks Sales price: €21,900 net, including the bucket as shown in the photos! Hydraulic grading bucket or additional digging buckets available from stock at extra cost! Optionally also with Lehnhoff or Martin bucket set! Affordable delivery possible!

Condition: new, pressure: 250stroke: 450table length: 1.500performance of pump: 35motor power: 15weight approx.: 2.500Workshop Press: Motor and manual control Laterally movable cylinder Iedpjit E N Ujfx An Dsar Hema or Caproni pump Pressure gauge Operating manual included CE-certified Made in Turkey Frame opening (clear width): 1500 × 450 mm

Condition: excellent (used), Catalogue number 7959 Iasdoy Am Erspfx An Dor TECHNICAL DATA - Track width: 250 mm - Shaft width: 250 mm - Maximum saw blade diameter for multi-blade saw: 350 mm - Saw blade bore diameter: 70 mm - Maximum cutting height for multi-blade saw: 120 mm - Table width with clearance: 830 mm - Table length: 1780 mm – Top section: - Kickback devices - Pressure roller, sliding, metal, smooth - Kickback devices - Pressure roller, sliding - Shaft with saw blades - Pressure roller, sliding, metal, 2 pcs – Bottom section: - Guide rail - Kickback devices - Track (caterpillar) - Electric body up/down adjustment - Manual adjustment of shaft with saw blades - Central lubrication - Infinitely variable feed speed adjustment - Feed motor 1.1 kW - Main motor 37 kW - Extraction port diameter: 170 mm - Overall dimensions (L/W/H): 2000x1500x2000 mm - Weight: 1850 kg ADVANTAGES – German-made – Used multi-blade saw, in very good condition Net price: 45,900 PLN Net price: 10,930 EUR depending on the rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: used, Bowl Volume: 250 liters Maximum Batch Capacity: Up to approx. 200 kg Installed Power: 5.5 kW – 8.5 kW Construction: Heavy-duty stainless steel (inox), robust industrial design Application: Designed for homogeneous blending of various meat formulations while preserving product structure and particle integrity Isdpfxsylnv As An Doar The Laska ME 250 is recognized for its durability, reliability, and high efficiency in demanding production environments.

Condition: excellent (used), Catalogue number 7961 TECHNICAL DATA - Track width: 250mm - Shaft width: 250mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 100mm - Table width with clearance: 940mm - Table length: 1700mm Top: – Pawls/kickers – Metal pressure roller, smooth – Shaft with saw blades – Metal pressure roller, smooth, 2 pcs Bottom: – Guide rail – Pawls/kickers – Smooth sliding roller Iedoyzzmuepfx An Doar – Track chain – Central lubrication – Feed motor 4kW – Main motor 37kW – Stepless feed speed control – Manual body lift – Manual shaft lift (with saw blades) – Extraction port diameter: 200mm – Overall machine dimensions (LxWxH): 1800x1500x1700mm – Weight: 1956kg ADVANTAGES – German made – Stepless feed speed adjustment – Used multi-saw in very good condition Net price: 22900 PLN Net price: 5450 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with stronger fluctuations)

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mm Turning length : 700 mm In General: Max. workpiece diameter:140 mm Chuck diameter:250 mm Max. turning length:700 mm Track I: Tool carrier I:Tool turret (X/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Isdoy A U I Iopfx An Doar Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track II: Main spindle (OP10):Travelling direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:772 mm C-axis:0.01° Position sensor (W):Direct scale : Sub-spindle (OP20):Direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:2+2-jaw power chuck Clamping cylinder:Hydraulic clamping cylinder C-axis:0.01° Track III: Tool Carrier II:Tool turret (X/Y/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Y-axis:50 mm mm) Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track IV: Main spindle (OP30):Travelling motor spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:988 mm C-axis:0.01° Position sensor (W):Direct scale : Tailstock:Fixed arrangement Quill:Hydraulic with position control Track V: Tool Carrier III:Milling/turning turret (X/Z) Tool drive:1,000 rpm, 240 Nm Tool holder:HSK-63 Number of stations:5 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Automation: Feed conveyor:O-type, 18 base carriers Discharge conveyor:O-type, 18 base carriers Part transfer:3 grippers on tool turret Max. workpiece diameter:140 mm Max. workpiece height:630 mm Workpiece weight:max. 20 kg Equipment: Position measurement systems:Direct (glass scales) Chip removal:Chip conveyor Workpiece measurement:Renishaw OMP Coolant supply:Internal coolant with filter, 17 bar Coolant temperature control:Immersion recooler Emulsion mist separator:Mechanical Software option I:Turning/milling operation Software option II:Automatic retraction Software option II:Sister tool management

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs Ijdpfxoxqhuue An Dear The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: excellent (used), functionality: fully functional, Bartezaghi 2BE 250 Cross Milling Machine Spindle length: 240 mm Maximum milling height: 250 mm Spindle diameter: 40 mm Spindle speed: 5600 RPM Motor power: 9 kW Pneumatic material clamping Iaedpoyyi E Nefx An Dor Control via control panel

Condition: excellent (used), HewSaw SRC200/250 complete machine set Ijdpfjy Dpxqox An Dear

Condition: excellent (used), functionality: fully functional, mileage: 1,14,456 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 02/2021, next inspection (TÜV): 03/2028, emission class: euro6, energy efficiency: A, color: red, number of seats: 7, number of previous owners: 1, Equipment: ABS, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, summer tires, traction control, trailer coupling, 3334 Paint finish Hyacinth Red Metallic MB 3334 A1M Rear axle shaft, no manufacturer specified A1O Rear axle shaft brand IFA BA3 Active Brake Assist BH1 Hold Function BS1 Brake calipers with Mercedes-Benz lettering C70 Pedestrian protection C74 Illuminated Mercedes-Benz entry badge CA1 Agility Control suspension CL1 Steering wheel adjustable for tilt and height CL3 Leather steering wheel CL4 Multifunction steering wheel with trip computer CM2 Bumpers and add-on parts painted in vehicle colour CU4 Aerodynamics package D14 Anodised roof rails E07 Hill-start assist E1D Digital radio (DAB) E1E Navigation E1F 10.25” display (26 cm diagonal) E1T Touchpad E28 Additional battery for retrofit consumers E34 Buffer battery for start process E36 Isolating relay for additional battery E4S Smartphone integration package E6M MBUX multimedia system Mid E70 Switch position lower control panel E7B Pre-installation for navigation ED4 Fleece battery 12V 92Ah EL9 2-way speakers front and rear ES2 12V socket in boot/load compartment ES3 12V sockets for rear seat rows, right and left ET4 Active Distance Assist DISTRONIC EX8 Navigation Plus EY6 Breakdown Management EZ5 Parking package EZ8 PARKTRONIC F48 Heated washer system F65 Automatically folding exterior mirrors F66 Lockable glove compartment F69 Electrically adjustable and heated exterior mirrors with integrated indicator F72 Auto-dimming exterior and interior mirrors FH0 Trim elements in piano black finish FLK Luxury estate FP3 Mirror package FP5 Exterior sport package FR8 Reversing camera FS5 Illuminated vanity mirrors for sun visors Iedpjyz Syfsfx An Dear FZ8 Convenience opening and closing with IR remote control G43 9G-Tronic automatic transmission H00 Warm/cool air duct to passenger compartment H15 Heated front passenger seat H16 Heated driver’s seat H20 All-round heat-insulating glass HH9 Semi-automatic climate control TEMPMATIC HX1 Refrigerant R-1234Yf HZ0 Electric auxiliary heater HZ1 Warm-air auxiliary heater HZ7 Semi-automatic climate control TEMPMATIC in the rear IK3 Luxury estate IL6 Metallic paint finish JA7 Blind Spot Assist JA9 Traffic Sign Assist JF1 Rain sensor JW5 Lane Keeping Assist KB5 Main fuel tank 70 litres LA2 Headlamp Assist LC9 Ambient lighting in cockpit LE1 Adaptive brake lights LG2 LED Intelligent Light System LG8 High Beam Assist Plus LP3 Interior lighting package M3E Electric suction fan, power level 5 MJ8 ECO start/stop function MO6 Emissions class Euro 6D M/N1 Gr. II MU6 Engine OM654 DE 20 LA 140 kW (190 hp) MX0 BlueEFFICIENCY package Q50 Tow bar with removable ball head QA4 Towing capacity 2,500 kg RY2 Wireless tyre pressure monitoring front and rear axles SA6 Front passenger airbag SB5 Swivel comfort driver’s seat SB6 Swivel comfort front passenger seat T19 Sliding door left T70 Child safety locks on rear side doors U73 Armrests for passenger compartment seats UR1 Quick-release seat rail system US3 Three-seater bench as comfort bed, 2nd rear seat row US6 Single seat 1st row, left US7 Single seat 1st row, right V33 Carpet in rear compartment V44 Carpet in front of vehicle interior V4Y 'Santos' fabric, black V9B Bed package VD7 Black roof lining W16 Fixed window front left in side panel/sliding door W17 Fixed window front right in side panel/sliding door W32 Electrically operated opening window, passenger compartment W64 Separately opening rear window W68 Easy-Pack tailgate W70 Privacy glass in rear compartment, dark tinted XA8 Weight variant 3,100 kg Z42 Passenger car registration ZH7 V-Class E