Used Schleicher Cut-To-Length-Lines for sale (50,417)

Year of construction: 2003, condition: excellent (used), functionality: fully functional, strip width: max. 1.500 mm strip thickness: 0,5 - 2 mm Lrsdpsrazyqjfx Akfok coil weight: max. 7 t mandrel Ø: 508 mm

Year of construction: 1985, condition: excellent (used), strip width: max. 1.500 mm strip thickness: 0,3 - 2 mm coil weight: 6 t mandrel Ø: 508 mm Lrsdpfenfu Icsx Akfsk No. of slits: max. 9

Condition: excellent (used), Year of construction: 1976, strip width: 400 - 2.100 mm strip thickness: 0,5 - 3 mm Lodpfxjqw Aaco Akfsrk coil weight: 40 t coil ID: 508/610 mm

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm Ledpjqw Akmjfx Akfork strip thickness: 3 mm coil weight: 10 t

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Ledpfx Akoihf Tpoferk Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Lsdpfjixqg Nox Akfork Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm strip thickness: 0,4 - 2 mm Lrodpfegnc H Dsx Akfjk coil weight: 7,5 t mandrel Ø: 508/610 mm

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, coil weight: 10,000 kg, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness copper (max.): 2 mm, inner diameter: 508 mm, sheet thickness (max.): 2 mm, outer diameter: 1,600 mm, coil width: 1,524 mm, number of blades: 3, type of input current: three-phase, warranty duration: 12 months, straightening roller diameter: 100 mm, CTL Demaq Format. New, only exposed in fair. Coil up to 10 Tons D1600, 20" Nominal. Coil Cart hydraulic. 4 rolls of feeder and 7 straight rolls. Hardened and chromed. Servo Nidec in straightener and decoiler. 3 longitudinal knifes, axis (HC) 134 mm, knifes 220 mm. Transversal shear. Full made in Spain in our facilities. Optional other devices and configurations. Lodpfx Ajtywpbokfjrk The most popular Demaq SPL machine. 2 unites available.

Condition: used, Year of construction: 1980, sheet width 1000 mm Lrsdewz Rvxepfx Akfjk plate thickness 125 mm

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, working width: 22 mm, cutting force: 183 t, working length: 500 mm, TECHNICAL DETAILS Lodpfeyyb Hrex Akferk Shearing force: 1,800 kN Flat material capacity: 500 x 22 mm Square profile capacity: 150 x 150 x 15 mm EQUIPMENT Counter Numbering system

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, stack height: 200 mm, paper weight (min.): 36 g/m², paper weight (max.): 160 g/m², product width (max.): 520 mm, roll diameter: 1,370 mm, TECHNICAL DETAILS Unwinder: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Maximum roll diameter: 1,370 mm Maximum roll weight: 800 kg Slitter: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Paper thickness: 36 g/m² to 160 g/m² Cutting accuracy: +/- 0.2 mm Continuously variable format setting: 4" - 25" Continuously adjustable cutting width: 5 mm to 80 mm Stack counter/stacker: Minimum stack length: 100 mm Maximum stack length: 635 mm Minimum stack width: 115 mm Maximum stack width: 720 mm Minimum stack height: 100 sheets Maximum stack height: 200 mm Maximum production speed: 250 m/min (depending on paper thickness) Paper thickness: 36 g/m² to 160 g/m² MACHINE DETAILS Unwinder: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Slitter: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Stack counter/stacker: Power supply: 35 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Folding station: Lredpfx Aksyzpw Uefsk Power supply: 50 A; 400 V, N, PE EQUIPMENT Electrical documentation Full flexibility for cutting and residual formats Format and length changes via operator panel Longitudinal cuts with knife holder possible Waste extraction possible (extractor not included in the system) Can stack up to two sheets simultaneously

Condition: excellent (used), functionality: fully functional, Grecon Dimter Opticut S50 Optimizer Maximum infeed material length: 5000 mm Minimum/maximum wood width: 20-300 mm Minimum/maximum wood thickness: 10-100 mm Possibility of bundle cutting Defect cutting in material CE Certificate Lsdpfx Akjy E Shkoferk DTR documentation Reference image of the machine

Condition: excellent (used), Rema AP-500 Optimizing Saw Ljdpfsxt Ezkjx Akfsrk Infeed material length: 500–6250 mm Blade diameter: 500 mm Motor power: 6 kW Pusher speed: 60 m/min Defect cutting: fluorescent chalk reader Margin trimming CE certificate DTR technical documentation Year of manufacture: 2018

Condition: used, machine/vehicle number: 008505, Position 1: Front-Loading Panel Saws HOLZMA-HPP 350/43/43 - HEE 38/22 Lrjdpfx Akoy Hcd Sefjk Position 2: Lift Table HOLZMA-HPP 350/43/43 - HEE 38/22

Condition: used, machine/vehicle number: 008208, Position 1: Front-Loading Panel Saws HOLZMA-HPP 510/43/43 + HEE 33/22 Position 2: Lift Table HOLZMA-HPP 510/43/43 + HEE 33/22 Lodpfsx A Thkox Akfjrk

Condition: used, machine/vehicle number: 007816, Position 1: Automated Warehouse BIESSE-SELCO SK 450 Position 2: Beam panel saws with automatic warehouse BIESSE-SELCO SK 450 Lodewuufqopfx Akfork

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2924, STROMAB CT 600 Rotary Crosscut Saw This is a used optimizing saw in very good condition, equipped with premium accessories (e.g., outfeed conveyor with pneumatic ejectors; infeed feeding table). Power supply (V): 400 Lredpfsy D Sdcsx Akfsk Blade diameter (mm): Ø 600 Year of manufacture: 2009 Model: CT 600 Motor power (kW): 7.5 kW Serial number: 2924 Overall assembly dimensions (mm): approx. 16,000 x 2,650 x 1,600 Total infeed table dimensions (mm): approx. 7,400 x 2,200 x 950 Infeed material table dimensions (mm): approx. 6,000 x 1,500 x 950 Outfeed table / conveyor dimensions (mm): 7,300 × 220 × 1,120 Number of pneumatic outfeed ejectors: 7 pieces Blade speed (rpm): 2,800 Table swiveling range (°): max. ±70 Cutting height at 0°: 160x310 mm, 80x390 mm Cutting height at +/-45°: 160x220 mm, 80x270 mm Cutting height at +/-70°: 160x100 mm, 80x130 mm Saw table rotation speed from 0° to 70°: 3 seconds Wood dust extraction ports: Ø 100 mm, Ø 120 mm Control and programming unit: ELCO ELETTRONICA Power 1000 The original manual is available in both English and Slovak (printed version). For supplementary or further information, please contact us by e-mail.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: ESL-60/30RS, total length: 20,295 mm, total width: 5,573 mm, Equipment: documentation/manual, For sale: A high-performance industrial line for float glass cutting from the industry-leading manufacturer, LISEC. The line is in excellent working condition, offering high precision, full automation, and heavy-duty reliability. Key Configuration Components: LISEC ESL 6030TS: High-performance automatic glass cutting table (CNC). LISEC ARS-33: Automatic loading and transfer system. LISEC BTA 50/33 & BTA 20/33: Transport and tilting tables for optimized material flow. LISEC TBX 33/12: Breaking/sorting and transport station. Lrodpfx Akoy A Iaqsfsk LISEC BTH 37-33: Auxiliary processing and logistics section within the line. Key Advantages: Full Synchronization: All components are engineered to operate in a seamless, automated cycle. Precision: High-tech control systems, synonymous with Lisec’s industry standards. Efficiency: Minimal material waste and high-speed operation for maximum throughput. Technical Status: Used, strictly maintained according to technical specifications and manufacturer requirements.

Condition: used, comprising: Tilting Table, manufacturer HEGLA, type ART6032, year 2005, serial no. E7662, own weight: 3,900 kg, edge stripping unit, cutting table with cutting bridge, manufacturer HEGLA, type VSG A46-MT, year 2003, serial no. 2118, footprint: approx. 3200x7000 mm, own weight: 11,000 kg, max. working pressure: 6 bar, with control unit, safety fence with mesh enclosure and light curtain system Lrodpfx Aksy Aqamsfjk

Condition: used, comprising: 8 large storage racks, make: HEGLA, model: FLB, load capacity: 40,000 kg each, for lengths up to 6,000 mm; tilting table/glass loader, make: HEGLA/HAGER, year of manufacture: 1988, serial no. 0880342; float glass cutting and breaking table, make: HEGLA; cutting bridge, make: HEGLA, model: OPTIMAX 6032ES, year: 1996, serial no. 6079, own weight: 6,500 kg; stacking table, table area: approx. 3200x6000 mm, with operator terminal, PC tower, monitoring monitor, safety cage and light barrier system. Lodpfjy Aqa Hjx Akferk

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV Lsdoiyyc Eopfx Akfsrk infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description Ledpfx Aksy Avqdsfork For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Advantages • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Grecon Dimter OptiCut 304R Optimizer Minimum input wood length: 900 mm (with cross chain infeed) Wood width min./max.: 40-200 mm Wood thickness min./max.: 15-80 mm Lowering, cutting, and acceleration time: 0.5 – 1 sec Cutting accuracy: min. 0.8 mm, max. 1.5 mm Max. wood cross-sections: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Saw blade diameter: 400 x 30 mm Saw blade speed: 4200 rpm Max. feed speed: 170 m/min Outfeed belt conveyor with 6 pushers Cutting modes: 1. Fixed length cutting 2. Board length optimization for maximum output 3. Defect removal with chalk marking Lrodpfxoyxltys Akfjk Total line length: 21 m Year of manufacture: 2000

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste Lrodpfx Akey Alcijfok • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood. Features automatic feed and return of the saw carriage, continuously adjustable feed advance, saw blade height, and cutting length. Equipped with a pneumatic special pressure beam, front and rear support tables HP 520, longitudinal and cross cuts in a single operation, 3-phase brake motor 6.8 HP / 5 kW and scoring unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm. The machine is in good condition and ready for immediate use, located at Neustadt/Weinstr. Lrjdpfeyzxkwox Akfjk Transport available at extra cost!