Used Segheria Completa Complete Sawmill for sale (12,450)

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. Ijdpfx Ajyxhq Uoizsaw If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Available from mid-April/May Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Iaodeypat Iepfx Aizsw Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Band saw blade 6000x100x1.1 mm stellite Water cooling with 20 l barrel 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Extension 3 m without support beam Chip collection box

Condition: used, A complete sawmill machinery package is being sold as follows. Sale as a complete package is preferred, but individual items or reservations are possible! 1. Log infeed system, 2-strand Conveyor length: 5.5m Width: 2.8m 2. Rail car/cross conveyor, driven 3-strand Length: 4.0m Width: 2.55m Track gauge: 1.85m 3. Tensioning car, Mayrhofer with auxiliary car Track gauge: 90cm 4. Circular sawmill, Möhringer Model: OSS75 Year of manufacture: 1991 Stroke: 500mm Frame length: 750mm with drive motor with saw guide with saw blades with hydraulic saw tensioner with splitting wedge, Möhringer Iaedpfx Aezb A R Hsizjw 5. Driven circular log transfer system Length: 9m Width: 1.4m Roller width: 1.2m 6. Spiral log transfer system Length: approx. 6m Width: 1.2m with lift for boards 7. Log transfer system Length: 14m Width: 1.1m Roller width: 0.85m with spiral log transfer system Length: approx. 7m Width: 1.1m Roller width: 0.85m 8. Cross conveyor, 4-strand Conveyor length: 2.3m Width: 4.2m 9. Double edger, Paul KME2 with cut-off saw with templates with saw blades with drive motor with sawdust extractor with length sorting 10. Cut-off saw, Stihl with rail car 11. Circular saw sharpening machine, Vollmer CABG 12. Circular saw tensioning machine, RIVO GSA 13. Circular saw sharpening machine, Vollmer CNE (2 units available) 14. Forklift, Manitou MSI 50, year of manufacture 2002 with accessories 15. Wheel loader, Manitou / Ahlmann AL85t, year of manufacture 2001 with accessories

Condition: ready for operation (used), Year of construction: 2018, operating hours: 10,100 h, functionality: fully functional, type of input current: three-phase, cutting length (max.): 8,000 mm, overall weight: 19,500 kg, cutting height (max.): 800 mm, input current: 250 A, input voltage: 400 V, saw blade width: 500 mm, main saw diameter: 500 mm, Equipment: cabin, centralized greasing system, scorer, - Log circular saw, fully functional - max. log diameter 800 mm, max. length 6 m, individual pieces up to 8 m - max. timber size 180/180 mm, in wide board mode 310/180 mm Iasdpfx Ajyc Ncreizjw - automatic timber sorting - price includes log feeder, 2x outfeed conveyors, and 1x sorting conveyor

Condition: used, Year of construction: 1997, operating hours: 0 h, functionality: fully functional, machine/vehicle number: 00000, ROUND LOG INFEED AND CUTTING LINE - Round log infeed to band saw in a two-part design - Cutting line, 4-4.5-5-5.5 meters (manually and continuously adjustable) with conveyor for sections and sawdust separator, as well as a robust sawdust screw conveyor - Automation and control system, as well as sensors for automatic/continuous cutting - "Nigger" (likely a mis-translation or colloquial term) for positioning logs on the bogie carriage SAWING AND CONVEYING - Carriage: Primultini electric with 2 log turners, length 5.70m • Clamping block 1-2: 86cm • Clamping block 2-3: 145cm • Clamping block 3-4: 220cm - Block band saw BRENTA, roller width 130mm, with control panel for all systems - Trimming band saw BRENTA, roller width 130 Iedpfx Aiozbtq Rjzoaw - PAUL KMEL edging saw, year of manufacture 1974 Incl. roller conveyors for infeed and outfeed Incl. control system and spare parts Incl. crosscut saw for cutting the boards to length - Edging saw “old” type CORONA - Roller-chain conveyors for all saws, as shown in the photos

Condition: used, Year of construction: 2000, functionality: fully functional, Trolley with belt for 1500 cm saw, log loading ramp, and 8 m board conveyor with retention. Saw motor 37 kW. Iasdjxvpd Iepfx Aizjw

Condition: used, Year of construction: 2004, functionality: fully functional, cutting length (max.): 8 mm, Equipment: cabin, Complete Artiglio log saw with Eagle 1100/I carriage. It has been maintained by Artiglio in 2018. It is in excellent condition. Isdpfx Asv Sr U Esizeaw

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Complete Sawmill with Carriage Bandsaw and Edger including conveyors 4 Headblock Log Carriage - 1200 mm Fully Hydraulic Bandsaw - 1+2 Edger Iaodpfxoy I A H Ao Aizsw

Condition: excellent (used), Year of construction: 2022, Horizontal 6-Head Resaw Iajdpsylw Sasfx Aizow Year of manufacture: 2022 Technical data: Motor: Electric 11 kW Cutting dimensions: Max. cutting width (cant timber): 30 cm Max. cutting height: 20 cm (18 cm with electric feed) Min. cutting height: 0.6 cm Min. material length: 120 cm Feed system: Steel belt conveyor Feed speed: 0 – 20 m/s Saw band: Length: 4010 mm Width: 32 mm / 35 mm Band wheels: Diameter: 600 mm Multisetwork – Allows cutting height of each individual unit to be set via the control panel. Technical condition: very good. Technical documentation and further photos are available.

Condition: used, Year of construction: 1970, functionality: fully functional, Complete, fully operational sawmill line for sale due to restructuring. The entire system can also be purchased in individual components. Iaodjx E Sn Depfx Aizsw Price upon inspection.

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Iedpfx Aiozagkzszjaw Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Söderhamn 447 infeed 240-12 chipper canters Block tilt and infeed 240-12 chipper canter Euromill profiles Iodpfx Aijwp E E Djzjaw Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: excellent (used), functionality: fully functional, ARI high capacity line for big logs Log deck 2 sections Step feeder Log conveyor Debarker infeed (Remill) Debarker Cambio 90-75/6 (or a Cambio 500) 2d scanner for reject boxes Log conveyor with 2 reject boxes Log conveyor, kickers to the left Buffering deck and step feeder Log conveyor Rema 3d scanner AriVislanda LT2 auto log turner 2006 AriVislanda LI-600 log centering infeed 2006 AriVislanda RL-600 Reducer AriVislanda QSS-700 Saw 2011 AriVislanda VFW 600 L 2011 AriVislanda board separator 2006 Block tilt Iedswp E Tnopfx Aizeaw AriVislanda block infeed type Nils AriVislanda RC-600 Reducer Ingvar Persson turn table AriVislanda 500A Infeed AriVislanda 509-7F Multirip AriVislanda boardseparator Beltconveyor Dual Edging lines Söderhamn (1 left 1 right) 2 x 300 m/min Cross conveyors Söderhamn Elevator Söderhamn 483 Scanners Söderhamn 528 Infeed Söderhamn 5100 Edger Söderhamn 5400 Edger outfeed with reject displacement EdgeIT system

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automated side board processing line with singulation, trimmer for cutting to length, 2 stacking machines, additional discharge, and cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross transfer of boards with a 4-strand chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Aligning roller conveyor Iaodpfxey Uzhfj Aizsw - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-cutting, 5000 mm into stacking machine 1, alternatively: without re-cutting, 4000 mm into stacking machine 1 with re-cutting, 4000 mm into stacking machine 2 with re-cutting, 3000 mm into stacking machine 2 with re-cutting, short lengths for discharge into a box with re-cutting, short lengths for discharge into a box with re-cutting, 2 or 3 x 101 cm for stacking slats with re-cutting, 2 or 3 x 101 cm for stacking slats or waste cut - cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of the finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, with side boards of 4000/17 x 76 mm, one employee produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipping system has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without problems.

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Iaodpfx Aisxtwwkjzow Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Iaedsrmmqzjpfx Aizsw

Condition: used, Year of construction: 2007, functionality: fully functional, cutting length (max.): 5 mm, overall weight: 3,000 kg, Includes: -Complete log sawmill -Log loading ramp Iasdsv Stdbjpfx Aizow -Roller track 6 meters It is in excellent condition and fully functional

Condition: good (used), Year of construction: 1994, Complete sawmill: Loading system + bandsaw 1100, blade 130 mm + hydraulic log carriage model EO 700 + 1 outfeed Iodpfxsy Iuuxs Aizeaw

Condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 7,500 mm, workpiece diameter (max.): 1,500 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a complete sawmill including sharpening workshop! TECHNICAL DETAILS Max. log diameter: 1.5 m Max. log length: 7.5 m Automatic separator: RG SX Resaw: 1,300 RG Trimmer: NO/5 single-blade EQUIPMENT Primultini model 460 sharpening machine for bandsaw blades Primultini bandsaw blade beveling machine Vollmer sharpening machine Bandsaw blade end-welding device Additional sharpening machine Ijdpoxgg Skefx Aizoaw Many saws

Condition: good (used), banana feed conveyor Iaedpfsyzup Ajx Aizsw

Condition: used, Year of construction: 2000, functionality: fully functional, all sawmill equipment Iaedjydvpzepfx Aizjw head saw, edger, log conveyor system, dust extraction system, saw sharpener

Condition: excellent (used), -1 Horizontal block bandsaw Hänni with tensioning carriage approx. 8 meters Iajdpfxsyr Dbuj Aizew Roller diameter 1200 mm incl. accessories - Frame saw system Bögli, passage 700 mm - Tensioning carriage, hydraulic with auxiliary carriage - Split wedge Mara, driven - Powered roller conveyor, length 6 meters / total length approx. 12 meters - Vollmer automatic gang saw sharpener - Manual setting tool for teeth - Sharpening machine for CV saws Vollmer - Waste carriage / 2 electric cranes and various accessories. Can also be dismantled at additional cost.

Condition: good (used), functionality: fully functional, Used, but fully operational complete line. The video shows the exact machine I am selling. New price starts at 337,605 USD without the upgrades. Please contact me for more details or pictures/videos. Iajdpjvn Ei Uofx Aizjw

Condition: refurbished (used), Completely refurbished Bongioanni CRL 4 tensioning wagon with clamping blocks. Track gauge 1200 mm. Rails newly milled. Servo-electric drive. Sale upon customer order. Iajdpfx Aoxtwxboizow

Condition: used, Complete sawing line IDC000103 1. SAW group Soderhamn Eriksson 240-12 ARI Vislanda KS12.2 2. SAW group Soderhamn Eriksson 240-12 Ari Vislanda DS74+1 Iajdpeu E Hu Djfx Aizow 3. ARI Vislanda KT5A-230 Speed up to 60 m/min.