Used Signal Tower for sale (1,981)

Condition: used, Year of construction: 2009, Liebherr crane 160 HC-L 8/16 including remote control: 160 HC-L 8/16 height: 37.5 m, reach 55 m, serial no. 30349039 Year of manufacture: 2009 Incl. the following crane parts: 1 undercarriage cross 2 base ballast A 7.5 to 12 base ballast B 4.8 to 1 boom 611. 10.7m 1 boom 621 8m 2 booms 622 10.35m 1 boom 631 5.18m 1 boom 641 tip 1 base tower 12.42m 5 tower section 4.14m "Completely repaired, sandblasted and repainted! This crane has been completely overhauled and is in excellent condition. Old paint and rust layers were thoroughly removed by sandblasting before a high-quality new coat of paint was applied. Subject to changes, errors and advance sales! You can find more vehicles on our Bjdpfxjvx Ecce Amneli Sales are made exclusively in accordance with our terms and conditions - see Homepage Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not represent an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: good (used), Asphalt plant central tower with screening unit, mixer, bucket elevators… Capacity: 160 tonnes/hour Bedpoy Hf Dujfx Amnsli

Condition: new, functionality: fully functional, Hirschmann OZD Profi 12M G12 Multimode converter 2-port - Signal converter Hirschmann OZD Profi 12M G12 : Transfer rate 500 kbps, Service primary side PROFIBUS, Connection type primary side other, Service secondary side PROFIBUS, Connection type secondary side D-Sub female 9-pin, Bidirectional yes, Overcurrent protection no, Galvanic isolation without, Rated current consumption 200 mA. Bedpfx Amstvz D Eenoli Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2011, Top Tower 3000 mixer Year: 2011 Capacity: 200 tonnes/hour Bodpoxz Um Eofx Amnoli Total material processed: 800,000 tonnes

Condition: excellent (used), Year of construction: 2011, TOP TOWER 3000 asphalt mixing plant comprising: Ermont dryer drum + CBS burner + filter and hopper below filter + mixer, 6 dosing hoppers. 2 bitumen storage silos. Year: 2011. Capacity: 200 tons/hour. Blodjxpm Ttopfx Amnji

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, Due to a rescheduling of a site visit, the auction end date has been postponed to Thursday, June 25, 2026! Bjdpfx Aozardtjmnsli The new price of the machine was €650,000! TECHNICAL DETAILS Capacity (for rolls weighing approximately 60g): 10,000 - 15,000 pieces/hour Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3-phase, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump system Ambient temperature: above 10 °C Belt system Belt guidance: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel wire belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Air flow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manually with air or hot gas Evaporator surface area: 311 m² each Air volume: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heater: 4 x 0.72 kW Defrosting interval: sequential Heater in the pan: hot gas Control and switch cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to the refrigeration unit: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Switch cabinet: stainless steel on a stainless steel frame Temperature display: min. 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm light: optical, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guide for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Easy-to-maintain accessibility SEW main drive with Danfoss frequency converter SEW overdrive with Danfoss frequency converter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel frame Freezer LED lighting controlled via the touch panel Welded stainless steel base pan with slope and drainage Under-freezing protection heater with a reserve circuit Floor temperature sensor with reserve sensor 4 separate evaporator units, each with one fan Evaporator pipes made of stainless steel Evaporator housing made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting made of stainless steel in the unit Sequent

Condition: ready for operation (used), POREBA parallel lathe TCC 160 type chuck diameter 1600 point height 900 max turning diameter 1800 turning diameter on the carriage 1200 between centers 10 meters documentations visual 3 glasses electricity Bsdjv Dv Rhepfx Amneli

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,250 kg, input voltage: 400 V, total width: 1,515 mm, total length: 2,060 mm, total height: 3,310 mm, volume flow: 15,000 m³/h, noise level: 77 dB, filter area: 160 m², suction capacity: 15,000 m³/h, negative pressure: 2,800 Pa, ESTA FILTOWER F-160 W3 Filter Ventilation Tower Industrial filter ventilation for welding halls – suitable for a variety of technological processes in manufacturing facilities. Application area: dust extraction, dry, granular material Top suction and draft-free bottom discharge – precisely at the work areas. Layered filter ventilation principle; no ductwork installation required. Cartridge filter elements – self-cleaning via compressed air pulses during operation. Filter cleaning based on differential pressure – no compressed air losses. Layered ventilation principle: contaminated air is extracted from above, filtered, and then released at floor level as clean, breathable air, without generating drafts. Precisely where workers breathe. Year of manufacture: 2016 Technical specifications: - Motor: 2 x 4.0 kW - Max. air flow rate: 15,000 m³/h - Max. negative pressure: 2,800 Pa - Sound pressure level: 77 dB(A) - Number of filters: 4 Bedpfx Asy D Nhfjmneli - Filter surface area: 160 m² - Dimensions (L/W/H): 2,060 x 1,515 x 3,310 mm - Weight: approx. 1,250 kg Stock no.: 1127

Condition: used, This listing is for GE Axichrom Master 300-1000 Control Tower + GE AxiChrom 300/300 mm Chromatography Column. The unit is in full working condition and ready for immediate use. Bljdpfxoxxycas Amnei Automated biopharmaceutical column packing system optimizing resin performance for purification

Condition: used, Year of construction: 1985, Parallel Lathe COLCHESTER type MASTIFF 1400 Between points: 2000 mm Maxi Ø on bench: Ø 535 mm Maxi Ø over saddle: Ø 380 mm Bodpfx Amezardajnsli Maxi diameter in brocken bed: Ø 815 mm Spindle diameter: Ø 90 mm Spindle speed: from 18 to 1400 RPM 3-jaws chuck Ø 310 mm Year of construction: 1985 Threadings: Metric + Whitworth 3 points Fixed Steady Tailstock: CM5 Scale: 2 axes NEWALL Square turret GOODSHAPE Accessories: 3 tool holders + few sets of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3600 x 1500 x 1700 mm Weight: approx 3 T

Year of construction: 2023, condition: used, Good condition with low usage. 7inch - 1920 capacity 15inch - 425 capacity ISM material incoming station. Blsdpfey R S Dpsx Amnoi Ask for quotation!

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Technology Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity Bsdpfx Amjynkbmonsli An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, laser power: 4,000 W, sheet thickness steel (max.): 22 mm, sheet thickness aluminum (max.): 9 mm, travel distance X-axis: 3,420 mm, travel distance Y-axis: 1,550 mm, CO2 laser cutting machine with pallet changer, loading/unloading system, and sheet metal storage TECHNICAL DETAILS X travel: 3,420 mm Y travel: 1,550 mm Z travel: 200 mm Working area: 3,070 x 1,550 x 200 mm Laser power: 4,000 W Cutting thickness steel / stainless / aluminum: 22 / 12 / 9 mm Blodpfey D Izqsx Amnei Table load: 920 kg Traverse speed X/Y/Z: 80 / 80 / 60 m/min MACHINE DETAILS Control unit: Fanuc 160 iLB Machine weight: 15,500 kg EQUIPMENT Double storage tower LKI UL300FO TWIN, year of manufacture 2004 Extraction and filter unit Torit Chiller unit MTA 201

Year of construction: 1999, condition: used, functionality: fully functional, machine/vehicle number: 30854, We are offering this used PBS MDF-7X6 filter tower with cyclone, year of manufacture 1999. Blsdpfey Rz Svox Amnoi Device: Cartridge filter Model: MDF-7X6 Serial Number: 3C854 Manufacturer: PBS - GmbH, D-71299 Wimsheim Year of manufacture: 1999 Filter area: 180.6 m² Extraction capacity: 16,000 m³/h Fan type: R 150/050/10 Cleaning system: Pulse-Jet If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), color: other, lifting height: 1,79,000 mm, Year of construction: 2015, operating hours: 2,500 h, General information Bsdpfx Ajwu D E Hemnjli Field of application: Construction Serial number: 1588 Functional Length of jib: 68,5 m Lifting capacity: 125.000 kg CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: DK Additional information Please contact Christiaan Dekker for more information = Additional options and accessories = - Counterweights - Hook blocks = Remarks = Kroll K1500L Towercrane 125 ton capacity Year: 2015 Hours: 2500 Electric with Generator( in container) CE Self erecting Lift to cabin Max. lifting height : 179 meter Radius: 68.5 meter

Condition: repair required (used), functionality: limited functionality, Tower slewing crane from a sawmill log yard, 7 m hook height, 36 m jib, lifting capacity up to center 3.0 t, at the front still 1.5 t. Dismantling can be organized. The relay for slewing the crane occasionally sticks. Blodpfxoy Rzzdj Amnei

Condition: used, Year of construction: 2006, Liebherr Top-Slewing Tower Crane 180 EC-H 10 Litronic – 60 m jib, 10 t lifting capacity; 45,456 Top-slewing tower crane with Litronic control system, offered as upper crane unit without tower sections. Manufacturer: Liebherr Model: 180 EC-H 10 Litronic Year of manufacture: 2006 Serial number: 45,456 Jib length: 60.0 m Maximum lifting capacity: 10,000 kg Lifting capacity at 60 m: 2,200 kg Configuration: Upper crane (without tower) Control system: Litronic Bodpfjyy I R Djx Amnoli Jib length and hook height can be extended upon request!

Condition: used, Year of construction: 2006, Liebherr Top Slewing Crane 180 EC-H 10 Litronic – 40 m jib, 10 t lifting capacity, 44.997 Top-slewing tower crane with Litronic control, offered as upper crane part without tower. Manufacturer: Liebherr Model: 180 EC-H 10 Litronic Serial No.: 44.997 Year of manufacture: 2006 Jib length: 40.0 m Maximum lifting capacity: 10,000 kg Blodpfsyy I Ivox Amnsi Lifting capacity at 40 m: 4,750 kg Version: Upper crane (without tower) Control: Litronic Jib extension possible upon request!

Condition: good (used), Clamping towers for horizontal milling center. Different types. Blodpfoxfugtsx Amnsi

Condition: used, Year of construction: 2003, Liebherr Tower Crane 420 EC-H 16 Litronic – 75 m Jib, 16 t Load Capacity Large top-slewing tower crane with Litronic control system, offered with tower sections but without undercarriage. Manufacturer: Liebherr Model: 420 EC-H 16 Litronic Year of manufacture: 2003 Serial number: 43,274 Jib length: 75.0 m Maximum load capacity: 16,000 kg Load capacity at 75 m: 3,200 kg Tower system: 500 HC Tower height: 30.0 m Blsdpfoyy Nndox Amnsi Tower configuration: 5 x 5.80 m Access: inclined or straight ladder Control system: Liebherr Litronic Frequency inverter: available Hoisting gear: 65 kW FU Hoisting speed: stepless up to approx. 85 m/min Slewing gear: frequency-controlled Trolley travel gear: frequency-controlled Design: Upper crane with tower (without base frame) Jib and hoisting heights can be extended according to the manufacturer’s data sheet.

Year of construction: 2017, condition: ready for operation (used), Four identical component storage towers Royonic Mycronic are available. Software: STSys SMDSoftware, version: 2.2.2.0, tower firmware: 78, capacity (7 inch reels): approx. 1000, light tower: yes, terminal light: no, external display: no, 2D internal scanner: yes, express unloading: yes, Agilis Pallet: no. Documentation available. An on-site inspection is possible. Bjdsy H I Hrepfx Amnoli

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). Bedpfx Aexg Ickjmneli The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Year of construction: 2017, condition: used, functionality: fully functional, GENERAC Light Tower V 20 — Year of manufacture 2017 Bljdey A E Ewspfx Amnji Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 9,900 plus VAT | EXW Einbeck | Delivery upon request

Condition: excellent (used), Year of construction: 2019, fuel type: electric, color: blue, Weights Bljdpfxexcuabe Amnoi Empty weight: 500 kg Functional Lifting capacity: 200 kg Working height: 450 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Transport dimensions (LxWxH): 1,5x0,73 Additional information Please contact Sales Department Collé Sittard for more information

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, load capacity per storage section: 3,400 kg, TECHNICAL DETAILS Storage locations: 25 pcs Storage height: 6,000 mm Bljdpfx Aoxhfkhemnei Sheet format: 2,500x1,250 mm Max. load per level: 3,400 kg Maximum field load: 30,000 kg EQUIPMENT Changeover tower with 6 drawers and extension with 19 compartments