Used Sinmag Divobun 3-30 for sale (69,375)

Condition: refurbished (used), functionality: fully functional, used dough divider rounder Fortuna Automat 3-30, overhauled, size 3, with square function, with 3 moulding plates, with new stainless steel cutter, for 30 pieces, machine no. A3-8989 E, weight per dough piece 32-70 g, total weight range from 960 to 2,100 g, 147 cm high, 69 cm wide, 80 cm deep, weight 540 kg, 6 A, 380 V, 50 Hz Prjdpfxjx Tizqe Abpja

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3520130500485, operating pressure: 150 bar, total length: 406 mm, high-pressure hose length: 15,000 mm, total height: 1,016 mm, total width: 406 mm, input voltage: 220 V, fuel: electricity, overall weight: 38 kg, pressure (max.): 165 bar, The Nilfisk Poseidon 3-30 XT is equipped with a hose reel and two high-pressure lances. The integrated detergent injector and the suction hose on the rear of the unit enable quick and easy application of the detergent. The rotary knob for detergent dosage is located in the same position. Technical specifications: Pressure: max. 165 bar Pjdjzl Tu Aopfx Abpora Cleaning performance: 3.0 Max. inlet temperature: 60 degrees Weight: 38 kg

Condition: used, Year of construction: 2016, operating hours: 762 h, functionality: fully functional, machine/vehicle number: 10022447, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, KUKA KR 30-3 robotic workstation with KRC4 controller and SmartPad. Operating time: only 762 hours. For sale: a complete robotic workstation based on the KUKA KR 30-3 industrial robot, equipped with a KRC4 controller and a KUKA SmartPad operator panel. The unit comes from a research and development laboratory and was used for testing and industrial automation projects. As a result, the robot has very low operating hours, totaling only 762 hours. This workstation is an ideal solution for system integrators, technical universities, R&D departments, and companies implementing automation and robotics solutions for processes. Technical data: Manufacturer: KUKA Model: KR 30-3 Year of manufacture: 2016 Payload: 30 kg Reach: 2033 mm Controller: KUKA KRC4 Operator panel: KUKA SmartPad Operating time: 762 h Controller power supply: 3x400 V Installed software options: EthernetKRL Profinet KRC-Nexxt RemoteService RobotSensorInterface Technical condition: The robot starts up correctly, and communication with the controller works properly. The visual condition is very good. The unit comes from a research and development project and has not been used in continuous industrial production. Included: KUKA KR 30-3 robot KRC4 controller KUKA SmartPad operator panel Cabling as shown in the pictures Additional information: The workstation can be expanded with: - pneumatic or electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation equipment. More products are available at tobesold.eu. Predpfxeziciwj Abpja Before shipment, the unit undergoes technical verification. A demonstration of the unit's operation is available by prior appointment.

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 07/2027, working width: 300 mm, conveyor belt width: 300 mm, type of input current: three-phase, total width: 600 mm, total length: 700 mm, total height: 1,200 mm, TOP Pastry Twister Machine Universum HWM 30 Pastry twister machine is mobile for all types of dough, such as corn twists and pretzels, etc. TOP Universal Twisting Machine for all types of dough suitable for twisting Pedpfxezb Uc Uj Abpsra Stainless steel design 300 mm belt width Robust technology Connection: 400V, 16A CEE plug Dimensions approx.: 600 x 700 x 1200, W x D x H Used machine, refurbished with warranty Quality from a specialist company! Benefit from over 35 years of experience!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0000121172, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, controller model: KRC2, number of axes: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 30 kg Reach: 2,033 mm Number of axes: 6 MACHINE DETAILS Control model: KRC2 Machine weight: 665 kg EQUIPMENT Robot arm KRC2 control cabinet Operating panel (KCP2) Cabling (except for one cable to the control unit) Dual gripper Profibus communication Psdpfx Abszcnv Dopera Note EXW: Dismantling and loading are to be arranged by the buyer.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp Predpfxjtrhq He Abpoa - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: Robot: 764020 / Controller: 45730, overall weight: 850 kg, load capacity: 30 kg, arm reach: 2,033 mm, The industrial robot from KUKA is a 6-axis automation system with a payload of 30 kg and a reach of 2033 mm. The robot was manufactured in 08/2006, the controller in 2006, and it has 0 operating hours. The condition is used. The system is equipped with KUKA System Software (KRC2). Typical applications include handling, assembly, and automation tasks. Prsdpfx Ajy N Eldebpja

Condition: new, functionality: fully functional, machine/vehicle number: WKVDAS00300129422, empty load weight: 9,882 kg, overall weight: 48,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 9,240 mm, loading space width: 2,550 mm, loading space height: 845 mm, total length: 13,190 mm, total width: 2,550 mm, suspension: air, tire size: 245/70 R17,5, tire condition: 100 %, Year of construction: 2026, NEW, NOT YET REGISTERED Trailer with hydraulic ramps BPW axles, 10 tons each Psdpfx Abozcqgfopjra 1st axle can be raised. 3rd axle is steering Overall length: 13,190 mm Platform length: 9,240 mm Platform height from the ground: 845 mm Hydraulic ramps, 40 tons capacity, with lateral movement Side extenders Tie-down hooks Spare wheel UNLADEN WEIGHT: 9,880 KG

Condition: used, empty load weight: 6,950 kg, maximum load weight: 30,050 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 03/1998, suspension: air, tire size: 385/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, BPW axles, air suspension, 1st axle liftable, last axle with self-steering, ABS (anti-lock braking system), container locking, underbody protection, supports, storage box. Construction: Swap body semi-trailer for 20/2x20/30 and 40-foot containers, 3x BPW axles, drum brakes! Psdpox Emldsfx Abpora 1st axle liftable, 3rd axle with self-steering! Spare wheel available for an additional charge! ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors. - .

Condition: used, axle configuration: 3 axles, first registration: 02/1984, color: other, Year of construction: 1984, Empty weight: 6.080 kg Axle 1: left 6 mm right 6 mm Prsdpfxsxu Dlqj Abpoa Axle 2: left 10 mm right 10mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total width: 6,265 mm, total length: 7,420 mm, total height: 3,900 mm, Baling Press Henschel PS 3-30 / 30 B Year of manufacture: 1999 (refurbished and modernized by ATM in 2016) Immediately operational (all necessary repairs and servicing have been carried out by us) Main dimensions of the entire machine: Length: 7420 mm Width: 6265 mm Height: 3900 mm Total weight: approx. 38 t Feed opening: 1210/2150 x 1900/2340 mm Technical data: Motor: 1 x 90 kW Pressing force: - 1st compression: 1000 kN - 2nd compression: 1570 kN - 3rd compression: 2000 kN - Bale door closing force: 200 kN Bale size: 300 x 300 mm Prsdpfx Asyx Axgebpsa

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 121172, load capacity: 30 kg, arm reach: 2,033 mm, Completely refurbished KR30 robot. New paint. Refurbished ZH axis. KRC4 controller. Original photos available by email. Predpfx Absxzyr Topea

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 1354.18, functionality: fully functional, operating hours: 8,000 h, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 300 mm, operating speed: 60 mm/s, table width: 550 mm, table length: 400 mm, total height: 20,000 mm, overall weight: 2,500 kg, installation height: 500 mm, Technical data: Pressing force 30 t Stroke 300 mm Installation height 500 mm Fold-through hole in table 120 mm Front passage 550 mm Usable table depth 400 mm Usable table width 550 mm Speed from 60 mm/sec. Pedpetrd Ubsfx Abpjra Speed up to 180 mm/sec. Hydraulic oil tank capacity 400 l Drive power 7.5 kW External dimensions L x W x D 1200 x 2000 x 2600 mm Weight 2.5 t With - 2-hand release - light barrier - safety cage - Infinitely variable pressure control, preselection with digital display - Infinitely variable speed control - 8000 switch-on hours - CE marking - complies with UVV

Condition: new, Year of construction: 2025, Ring Rolling machine ZOPF - model ZB 30/3 MD TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - manual adjusting of the center roller - working position horizontal and vertical (optional) - digital readout - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW Predpsdktnvefx Abpea - adjusting way: 35 mm - weight: 85 kg - dimensions: 530x420x500 mm

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface Prsdpfx Ajgh T Iaobpja - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw - adjusting way: 35 mm - weight: 110 kg - dimensions: 530x420x500 mm

Condition: used,

Condition: new, Year of construction: 2009, 30 mm 30 mm L-beam 20 x 20 x 4 mm flat steel 25 x 6 mm Axis diameter 20 mm Pjdpfx Absv Skzdspjra work speed 11 U/min total power requirement 0,2 kW weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Prsdpfx Abeztn I Hepsa Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: excellent (used), I am offering for sale a professional laboratory power supply, the BEHA NG 310 P10 (UNIWATT), designed for service, laboratory, educational applications, and testing electronic devices. The device has been inspected and is in perfect working order. It features two independently adjustable 0–30 V / 3 A outputs and an additional stabilized 5 V / 3 A DC output. The power supply has digital displays and the ability to measure voltage and current. The housing shows normal signs of use, as seen in the pictures. It is sold in the exact condition as shown in the photographs. Technical data: • Manufacturer: CH. BEHA GmbH • Model: NG 310 P10 • Supply voltage: 230 V AC, 50/60 Hz • Current consumption: 2.2 A • Outputs: 2 × 0–30 V DC / 3 A 5 V DC / 3 A • Measurement input: 0–100 V DC • Digital voltage and current indicators • Catalog number: FW031003300D • Country of origin: Germany Podpfszrttfox Abpsra Condition: • Used • Inspected – fully functional • Normal signs of use • Sold as shown in the pictures A robust, high-quality laboratory power supply from the renowned German company BEHA, ideal for electronic service centers, workshops, laboratories, schools, and research and development work. Thanks to its two independent adjustable channels and an additional 5 V output, it is perfect for testing, powering, and starting electronic circuits.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, type of input current: AC, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) Predpfsyxccrsx Abpea - Weight: approx. 100 Kg

Condition: excellent (used), Year of construction: 2016, 1. For sale is a fully functional and very well-maintained gas burner from Weishaupt, model WM-G30/1-A. Burner type: WM-G30/1-A Output: 350 - 3100 kW Design: ZM Year of manufacture: 2016 - Delivery is possible upon request. - All technical data can be seen in the pictures. Prodpfohitrxox Abpsa Preferably sold to dealers, commercial enterprises, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical and data transmission errors.

Condition: excellent (used), For sale: SEW-EURODRIVE WF30DT63L4 geared motor with a 0.25 kW three-phase electric motor. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. It shows normal signs of wear and tear resulting from use. The robust SEW-EURODRIVE gearbox ensures reliable operation and is ideal for conveyors, feeders, packaging machines, production lines, and other industrial applications. Technical specifications: Prsdpsznw Ewsfx Abpoa Manufacturer: SEW-EURODRIVE Type: WF30DT63L4 Motor power: 0.25 kW Power supply: 3× 230Δ / 400Y V Motor speed: 1300 rpm Output speed: 47 rpm Torque: 33 Nm Duty cycle: S1 Current: 1.19 / 0.68 A Frequency: 50 Hz Power factor: cos φ 0.81 Protection class: IP54 Insulation class: B Design: IM B5A Weight: 10.63 kg Lubrication: synthetic oil SEW PG460 Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE R40 DT80K4/BMG geared motor with a three-phase electric motor and built-in electromagnetic brake. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. Normal signs of wear resulting from use are visible. The geared motor is ideally suited for driving conveyors, feeders, production machines, and other industrial equipment. Technical data: Manufacturer: SEW-EURODRIVE Gearbox type: R40 Motor type: DT80K4/BMG Power: 0.55 kW Predpfxeznu Ipj Abpsa Power supply: 3×230 V Δ / 400 V Y, 50 Hz Motor speed: 1360 rpm Output speed: 53 rpm Brake: 230 V AC, braking torque 5 Nm Protection class: IP54 Insulation class: B Weight: 20.12 kg

Condition: used, Year of construction: 2003, functionality: fully functional, power: 30 kW (40.79 HP), Manufacturer: KAESER Model: ASD 57 Pjdpfx Abjwtz E Uepsra Motor: 30 kW Capacity: 4.5 m³/h Year of manufacture: 2003 Operating hours: 29,900 h

Condition: excellent (used), For sale: a Lenze Extertal geared motor / Germany, with a GST04-2M VBR071C42 cylindrical gearbox and an MDEMA1M071-42 three-phase motor. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good – it only shows normal signs of wear resulting from use. The geared motor is ideally suited for driving conveyors, feeders, production machines, packaging equipment, and other industrial applications. Technical data: Manufacturer: Lenze Gearbox model: GST04-2M VBR071C42 Motor type: MDEMA1M071-42 Rated power: 0.55 kW Power supply: 3×230/400 V AC, 50 Hz Motor speed: 1405 rpm Output speed: 421.5 rpm Gear ratio: i = 3.333 Torque: 12 Nm Prjdpfx Aozm T Ifjbpja Rated current: 2.40 A (230 V Δ) / 1.40 A (400 V Y) Power factor (cos φ): 0.77 Protection class: IP55 Insulation class: F Mounting type: B3 (flange) Standard: EN 60034