Used Spirax Sarco Bellows Shut-Off Valve for sale (13,605)

Year of construction: 1976, condition: ready for operation (used), functionality: fully functional, center height: 125 mm, center width: 600 mm, year of last overhaul: 2026, The machine underwent a comprehensive retrofit in 2026! New centering point with carbide insert on the workpiece spindle stock Tailstock with MK-3 mount and air lift Adjuster on the tailstock New centering point with carbide insert on the tailstock 2 grinding wheel flanges 1 new grinding wheel 1 internal grinding spindle Ksdozr Ep Ejpfx Akledr Completely renewed paper band filter with new filter fleece and circuit Completely overhauled, steplessly adjustable grinding spindle motor Automatic grinding cycle with dwell time and shut-off Machine geometrically completely overhauled Guides ground and scraped Hydraulic cylinder overhauled New piston rod and seals Machine body and assemblies blasted, primed and completely painted TECHNICAL DETAILS Center height: 125 mm Center distance: 600 mm Grinding wheel flange dimensions: 400 × 50 × 127 mm Speed of internal grinding spindle: 14,000 rpm EQUIPMENT Workpiece spindle stock standard with MK-5 mount, swiveling Stepless speed control via potentiometer

Condition: used, functionality: fully functional, machine/vehicle number: 3518100194, Year of construction: 1999, load capacity: 3,000 kg, fuel type: diesel, mast type: duplex, drive type: Diesel, Diesel forklift Kjdpszttlqsfx Aklodr Chassis number: 3518100194 Mast type: Duplex Condition: Limited operational readiness Technical condition: normal Front tire type: Solid rubber Front tire condition: 40 - 60% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: Linde H30D / Deutz engine, no.: R0803, year of manufacture: 1999, operating hours: not specified, lifting capacity: 3,000 kg, lifting height: not specified, overall height: 2300 mm, mast: standard, drive: diesel, engine: Deutz diesel engine, equipment: side shift, 3rd hydraulic valve, front and rear work lights, windscreen, full cabin and windscreen wiper. Condition / known defects: The Deutz engine starts. The machine drives, but sometimes shuts off again after travelling only a few metres. The tilt cylinder is defective. Poor visual condition. Sold in its current condition. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. 3rd hydraulic valve, rear work light, front work light, windscreen, full cabin, windscreen wiper.

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: Kdedpfxozu Aibo Aklor The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: ready for operation (used), functionality: fully functional, A good used take off conveyor in stainless steel fitted with modular belt suitable for use with bagmaker to take filled bags and elevate up to working height - this conveyor is in stainless steel and it was designed and built to accept a metal detector if required (see metal free zone) - complete unit on lockable swivel castors with brakes - three phase geared drive motor with gearbox - modular belt with flights Kdjdpfx Aewucfrjkler Ready to ship worldwide Ask for more videos and pictures via Whats App Floor length - 2200mm Belt width - 300mm Infeed height to top of belt - 180mm Outfeed height - 1050mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Professionally designed crossflow ultrafiltration membrane system, engineered, built, and fully instrumented by a membrane specialist. 12 membrane modules in 3 parallel stages of 4 modules each, active membrane area 2.16 m². PVDF ultrafiltration membranes, separation limit 100 kDa, in PVC module tubes. Membrane stages can be individually shut off. Designed for diafiltration and pure concentration. Hygienic centrifugal pump, approximately 11 m³/h at approximately 2.5 bar feed pressure, crossflow up to 2.5 m/s. Retentate-side pressure adjustment via automatic proportional valve, stainless steel heat exchanger for temperature control. Ideally operated in conjunction with two feed tanks. Technical data: - Total membrane area: 2.16 m² (12 modules, 3 stages of 4) - Membrane type: PVDF-UF, separation limit 100 kDa; module tubes PVC, stages can be individually shut off - Circulation rate: approx. 11 m³/h at approx. 2.5 bar; crossflow up to 2.5 m/s - Permeate rate: 20–120 l/h·m² (depending on suspension/concentration) - Interfaces: Inlet/Outlet, each DN50 (DIN 11851) - Instrumentation: Flow rate (feed/permeate), pressure and temperature sensors, proportional valve, stainless steel heat exchanger Kdedpfx Akjzmapvolor - Commissioned in June 2023; well-maintained, operational condition, regularly CIP-cleaned (last cleaning on 02/02/2026) More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the client through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: excellent (used), Year of construction: 2017, Batch mixer, type WBX 150 1 Control unit for the mixer 1 Manual shut-off valve 1 Separate control panel ("remote control") Technical data for the 150 series, WBH 150: Parameter | Value Nominal volume | 150 l Kedpfx Aoztwbvjkledr Usable volume | 105 l A | 1,460 mm B | 670 mm C | 754 mm Empty weight | approx. 270 kg Subject to prior sale Please submit inquiries only by email. Note: The machine is in storage and can be inspected on site. The buyer must arrange for shipping. This is not included in the quoted price.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale: EFCO Maschinenbau PS 15 Valve Testing Bench. The bench is pre-owned and in excellent working condition. It is currently connected and can be inspected and tested on-site. EFCO PS series test stands are designed for pressure and tightness tests on various types of valves. Suitable for testing shut-off, control, and safety valves. Kdedjy R N A Aspfx Aklor Specification: Model: EFCO PS 15 Vertical Test Bench Clamping Force: 15 t Suitable for testing: Shut-off valves, control valves, safety valves Working Range: DN 50–600 DN 2″–24″ The working range can be extended using external testing Test Pressure: Water up to 1380 bar (20000 psi) Air / nitrogen up to 300 bar (4350 psi) Quick specimen clamping Convenient and safe operation Robust industrial frame More information: EFCO PS 15 Professional German equipment suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be glad to assist you.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Kjdpfjw H Aw Sex Aklsdr Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: used, Year of construction: 2015, Temperature controller Kodpfezl S Tdjx Aklsdr Pipe trace heating Manual shut-off valve Thermometer Strainer Solenoid valve for make-up water Solenoid drain valve (normally open when de-energized) Level monitoring Tank Pump Pressure gauge Ball valve Check valve Pressure reducing valve Temperature sensor Expansion tank Air vent Backflow preventer Biocide dosing system Corrosion inhibitor dosing system Side-stream filter Twin water softener system GWK Hermeticool

Condition: excellent (used), The VAC-7HS abrasive recovery system is an electrically powered vacuum abrasive recovery system specifically designed for use with mineral abrasives, which typically generate more dust. The VAC-7HS abrasive recovery system is equipped with a particularly powerful side-channel blower, an integrated, high-performance cartridge filter with pulse-jet cleaning, a separate dust pre-separator SC-500 with manual emptying, and a 0.3 m3 open-air filter. It also includes a stationary storage silo for manual refilling of the blasting pot (manual shut-off valve), a bottom hopper, and suction hoses. The VAC-7HS abrasive recovery system can be used universally for recycling for further reuse or for a big bag filling station for the disposal of the mineral abrasive. Ksdjzarybjpfx Akljdr

Condition: used, - Flat bottom tank with 2% slope - Brand : ALFA LAVAL - Total capacity : 30200 liters - Material : 316 L stainless steel - Interior finish : Cold rolled - Exterior finish : Cold rolled Kedpfxjw Ngqts Akledr - Temperature controlled ROOF - Conical - 1 off-center chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 connection for level sensor BOTTOM - 2% sloped plate with drain - 1 total drain valve with plug DIMENSIONS - Diameter : 2800 mm - Total height : 6000 mm - Ferrule height : 4800 mm - Conical upper dome : 500 mm - Chimney : 300 mm

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Kdedpfoy Hmfyox Aklor Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Kedpjy Tybnofx Aklsdr Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Kdjdpjxbgrgjfx Aklor Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm Ksdpfxoy E Hyns Akledr band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: excellent (used), Year of construction: 2017, Batch mixer, type WBX 1100 1 control unit for the mixer with frequency converter 1 cutter head, 5.5 kW 1 manual shut-off valve 1 separate control panel ("remote control")  maximum useful volume: 770 liters  mixing product: plastic granules  bulk density: ~0.7 - 0.8 kg/liter  product properties: free-flowing  mixing time: < 3 min. MACHINE DESCRIPTION Mixing drum Ksdpoza Ap Tjfx Akledr  horizontal cylindrical mixing drum  end walls screwed to the drum Mixing system  mixing tools, such as ploughshares or inclined blades, screwed to blade arms in pockets Bearing  bearing of the shaft in flange bearing housings located outside the mixer, with roller bearings Sealing  shaft sealing by easily replaceable packing glands, packing glands cleaned by air Feeding  2 nozzles with flange, according to dimension sheet Ventilation  through 1 nozzle with flange, according to dimension sheet with filter bag incl. bracket and welded-in protective grid Discharge  via a dead-space-free closing flap, pneumatically operated  1 outlet nozzle with flange, according to dimension sheet Liquid feed option  none Inspection and cleaning  through 1 flap at the front of the drum, (1700 x 550) Flap closed by quick-release fastener  occupational safety and accident prevention by locking magnet and limit switch (not wired) Materials  mixing drum made of: stainless steel 1.4306  mixer shaft made of: stainless steel 1.4306  mixing tool made of: stainless steel 1.4306 Subject to prior sale Please send inquiries only by email Note: The machine is in storage and can be inspected on site. The buyer must arrange for shipping. This is not included in the quoted price.

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, The teco th 140 temperature control unit from GWK with indirect cooling is up for sale; it offers a wide range of features which I can provide upon request. The hose lines are also included. The unit will be inspected by GWK prior to delivery, with inspection costs already included in the sale price. Medium: Heat transfer oil, Marlotherm SH Kdsdox Dcd Ropfx Akler Heating capacity: 27 kW at up to 350°C Cooling capacity, indirect: 110 kW Pump: 150 l/min at max. 7 bar Cooling via bypass with 3-way motorized controller Shut-off valve on supply and return Connection for PT 100 sensor Internal drip tray Dimensions: L: 1320 mm, W: 570 mm, H: 1720 mm Weight: 410 kg

Condition: like new (used), For sale is a high-quality KSB industrial shut-off valve in a heavy-duty steel casting design. Technical specifications: * Manufacturer: KSB * Nominal size: DN 100 * Nominal pressure: PN 40 * Housing material: 1.0619+N / GP240GH+N steel casting Kodeztqmxopfx Akljdr * Connection: Flange * Actuation: Handwheel * TA-Luft version/marking * Marking on the handwheel: 290 Nm / 40 cycles * Robust industrial design * Suitable for industrial pipelines and process plants, depending on the medium used and the operating conditions Condition: Stock item with minor storage marks or slight surface rust. See original photos.

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake manifold diameter: 350 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, Schuko Intermediate Filter System “Eco Var 04” Professional dust extraction system Schuko Eco-Var 04 (year of manufacture 2004) – complete system including piping, control system, and emission permit. For sale is a powerful and fully functional industrial dust extraction system from the premium manufacturer Schuko, type Eco Var 04 (year of manufacture 2004). The system is ideally suited for woodworking companies for efficient extraction of chips and dust and is offered including an extensive pipe and control system infrastructure. Technical data & equipment Kodpfx Aszddwgekljdr • Manufacturer: Schuko • Model series: Eco Var 04 (intermediate filter system) • Year of manufacture: 2004 • Drive power: approx. 11 kW (powerful, efficient fan) • Discharge: Rotary valve airlock with 5 sealing lips (ensures safe, pressure-loss-free material discharge into containers, silos, or briquetting presses) Extensive accessories & infrastructure (included) • Pneumatic valves: approx. 20 units for automatic shut-off of individual machine connections. • Pipe & hose system: approx. 80 meters of robust extraction pipe including the corresponding flexible hoses. • Pneumatic infrastructure: compressed air connections including all associated pneumatic hoses for valve control. Product advantages & condition • Complete package: No tedious searching for individual parts – from the filter system to the piping and the complete control and pneumatic system, everything is available for workshop installation. • Robust industrial quality: The Eco-Var series from Schuko is known for its durability, high filter area, and reliability in daily workshop use. • Energy-efficient: Thanks to the approx. 20 pneumatic valves, the extraction performance is only provided where work is currently being carried out, which saves a lot of energy. Note for buyers: The system is in a well-maintained and fully functional condition, appropriate for its age. Inspection can be arranged.

Condition: new, Year of construction: 2026, color: red, overall weight: 14,630 kg, maximum load weight: 12,500 kg, empty load weight: 2,130 kg, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, rear discharge Body: Water tank roll-off container, approx. 10,000 liters. ARCHIVE IMAGES Water tank with platform, approx. 10,000 liters - according to DIN 30722-1. - Clear internal dimensions L x W x H: 5400x2394x approx. 1000 mm (tank 4600mm, platform 800mm) - Overall dimensions L x W x H: 5,683mm x 2,394mm x 1,616mm Ksdpfx Akezr Rl Eslodr - Material quality: S235 (St-37) - Floor plate / wall plates: floor plate thickness 5mm, sides 3mm, roof and rear wall 4mm - rear platform made of non-slip sheet metal 5 mm - Frame made of INP180 - Manhole on the roof: diameter 600 mm - Inside, 3 baffle plates, diameter 600 mm (large cavities) - A galvanized and screwed-on step ladder on the front wall - At the bottom of the rear wall, an A-connection with a tap - At the top rear, a B-connection with a flap for filling - On the front wall, a C-connection with a ball valve at the bottom left and right, pipes for venting - 2 greasable steel rollers, L=300mm - 2 riser pipes, galvanized and screwed-on (1 at the front and 1 at the rear) - 2 level indicators made of hose (1 at the front and 1 at the rear) Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 μm, externally primed with epoxy resin paint 60 μm and painted with 2K paint (polyurethane paint B7) 40 μm in RAL color 3000 Red. With UVV label (DGUV), checklist (safety instructions), and warning marking - waterproof (water tightness will be tested). Available probably from the end of September / beginning of October 2026. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2026, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel construction, rear outlet Superstructure: Water tank roll-off container, approx. 12,000 liters. ARCHIVE IMAGES Water tank without platform, approx. 12,000 liters - according to DIN 30722-1. - Internal dimensions (L x W x H): 5500 x 2394 x 1003 mm - Overall dimensions (L x W x H): 6,081 mm x 2,394 mm x 1,743 mm - Material grade: S235 (St-37) - Floor plate / wall plates: Smooth floor plate, thickness 5 mm, sides 3 mm, roof and rear wall 4 mm - At the rear, bottom: 2x Storz A couplings with ball valve (4 inches) - At the rear, top: one Storz B coupling with bend and cover (2 inches) - At the front, top on the hook: one Storz B coupling with bend, coupling, and cover (2 inches) - Galvanized and screwed-in step ladder on the front wall, pipe for venting (with ball valve for closing) - Frame made of INP180 - Manhole on the roof: diameter 600 mm - Inside: 3 baffle plates, diameter 600 mm (large cavities) - Waterproof (tested for watertightness) - Greasable steel rollers Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 µm, externally primed with epoxy resin paint, 60 µm and painted with 2K paint (polyurethane paint B7), 40 µm in RAL color shade 3000 Red. With UVV label (DGUV), checklist (safety instructions), and warning marking - waterproof (tested for watertightness). Available from approximately the end of September / beginning of October 2026. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Kdsdpfx Akszr Rl Seler

Condition: new, Year of construction: 2026, color: red, overall weight: 14,630 kg, maximum load weight: 12,500 kg, empty load weight: 2,130 kg, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, rear discharge Body: Water tank roll-off container, approx. 10,000 liters. ARCHIVE IMAGES Water tank with platform, approx. 10,000 liters - according to DIN 30722-1 - Internal dimensions L x W x H: 5400x2394x approx. 1000 mm (tank 4600mm, platform 800mm) - Overall dimensions L x W x H: 5,683mm x 2,394mm x 1,616mm - Material grade: S235 (St-37) - Floor plate / wall plates: Floor plate thickness 5mm, sides 3mm, roof and rear wall 4mm - at the rear, a platform made of non-slip sheet metal 5 mm - Frame made of INP180 - On the roof, a manhole: diameter 600 mm - Inside, 3 baffle plates, diameter 600 mm (large cavities) - On the front wall, a galvanized and screwed-on ladder - At the bottom of the rear wall, an A-connection with a tap - At the top rear, a B-connection with a flap for filling Kjdpfx Aszr Rlxoklsdr - On the front wall, a C-connection with a ball valve at the bottom left and right, pipe for venting - 2 greased steel rollers, L=300mm - 2 vertical pipes, galvanized and screwed-on (1x front and 1x rear) - 2 level indicators made of hose (1x front and 1x rear) Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 µm, externally primed with epoxy resin paint, 60 µm and painted with 2K paint (polyurethane paint B7), 40 µm in RAL color 3000 Red with UVV sticker (DGUV), checklist (safety instructions) and warning marking - watertight (will be tested for watertightness) Available presumably from the end of September/beginning of October 2026. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, Year of construction: 2026, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel construction, rear outlet Body: Water tank roll-off container, approx. 12,000 liters. ARCHIVE IMAGES: Water tank without platform, approx. 12,000 liters - according to DIN 30722-1. - Clear internal dimensions L x W x H: 5500 x 2394 x 1003 mm - Overall dimensions L x W x H: 6,081 mm x 2,394 mm x 1,743 mm - Material grade: S235 (St-37) - Floor plate / wall plates: Smooth floor plate, thickness 5mm, sides 3mm, roof and rear wall 4mm - At the rear, bottom: 2x Storz A connections with ball valve (4 inches) Kdjdpfx Aszr Rmceklsr - At the rear, top: One Storz B connection with bend and cover (2 inches) - At the front, top, on the hook: One Storz B connection with bend, coupling, and cover (2 inches) - Galvanized and screwed-on step ladder on the front wall, pipe for venting (with ball valve for closing) - Frame made of INP180 - On the roof: Manhole, diameter 600 mm - Inside: 3 baffle plates, diameter 600 mm (large cavities) - Watertight (will be tested for watertightness) - Greasable steel rollers Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 μm, externally primed with epoxy resin paint, 60 μm, and painted with 2K paint (polyurethane paint B7), 40 μm, in RAL color 3000 red with UVV label (DGUV), checklist (safety instructions), and warning marking - watertight (will be tested for watertightness) Available from approximately the end of September / beginning of October 2026. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, interim sale, and errors!

Condition: used, Transport container with galvanized steel frame Nominal capacity: approx. 1,000 l Overall height: approx. 1,550 mm Length: approx. 1,100 mm Width: approx. 950 mm Weight: 215 kg Material: Material: V4A 1.4404 Manhole DN 400 Bottom: Outlet DN 50 extending towards the front with shut-off valve Ksdpfx Aeztpz Uekledr Otherwise, as shown in the pictures Manufacturer: BLEFA Note: The containers were last used for storing chemical and pharmaceutical products.

Condition: excellent (used), Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: ARI Foxboro, Pneumatic Control Valve -Control valve: type ARI-Stevi 451 -Spring accumulator: ARI Type 100403429-216 -Positioner: Foxboro, Schneider Type SRI986-BIDS7ZZZNA -Connection: DN50 PN16-25 Kdodpfx Akjq Nqxzoler -Number: 3x control valve available -Price: per piece -Dimensions: 710/300/H270 mm -Weight: 31 kg