Used Steinbock Boss Je 13-70 for sale (21,576)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! Blsdpfx Apey Hkd Hsvek The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, mileage: 1,001 km, color: orange, driver cabin: other, gearing type: other, loading space volume: 13 m³, loading space length: 4,600 mm, loading space width: 2,340 mm, loading space height: 1,200 mm, Vehicle location: Bovenden, steel body Body: for 3-axle trucks, approx. 13 m³, hydraulic tailgate. Roof protection. Bljdpsvhgy Ujfx Apvjk ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: excellent (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder -Manufacturer: Helm, suspension clamp, rail holder, galvanized yellow Bjdpfewca D Iex Apvslk -Type: 1508 -Dimensions: see photos -Quantity: 64 pieces available Price: per set -Dimensions: 90/70/H135 mm -Weight: 1.3 kg/set

Year of construction: 1996, condition: used, Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type 13509 367 W 24 V -Dimensions: 660/360/H250 mm -Weight: 51 kg Blodpfx Apjk D Nulsvek

Condition: used, Year of construction: 2012, fuel type: diesel, Mast: articulated arm Blodpfxjzl Nn So Apvok Lifting capacity: 272 kg Please contact Gebrauchtgeräte Center for more information

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Blsdpfx Apezf Ibkevsk Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2474258, power: 40.45 kW (55.00 HP), load capacity: 272 kg, lifting height: 41,150 mm, platform length: 2,440 mm, platform width: 1,830 mm, overall weight: 21,092 kg, transport length: 12,930 mm, transport width: 2,490 mm, transport height: 3,090 mm, fuel type: diesel, color: blue, Equipment: UVV, all wheel drive, Technical Specifications - Year of manufacture: 2019 - Drive: Diesel 4WD - Working height: 43.15 m Bsdpfoyqyk Nsx Apvslk - Platform height: 41.15 m - Lateral outreach: 21.26 m - Load capacity: 272 kg - Platform dimensions (LxW): 12.93 x 2.49 m - Total weight: 21,092 kg - UVV (accident prevention inspection): new All-wheel drive, very large outreach, lower and upper boom telescopic, basket arm telescopic, wide work platform, extendable axles, larger setup area, widened work platform, in working condition, general signs of use.

Condition: ready for operation (used), Festo ELGA-TB-RF-70-800-0H+MF / 1371245 toothed belt axis, used, in good condition, 100% functional, delivery as per photos. Bjdpfx Aex Ernkspvolk

Condition: new, AC motors FY 70 B-4 three-phase motor SN:526/13068K03 ,unused, 100% functional, scope of delivery as per photos Bjdpfxeuh Ia Ds Apvjlk

Condition: used, maximum load weight: 1,207 kg, overall weight: 1,800 kg, axle configuration: 1 axle, first registration: 05/2022, loading space length: 3,800 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, Unsinn ASK 1837-13-1770 Lowering Box Body Internal No. for inquiries: 0825639 * Body manufacturer: Unsinn * Type: ASK 1837-13-1770 * Permissible total weight: 1800 kg * Tare weight: 593 kg * Box body * ABS * ELECTRO-HYDRAULICALLY LOWERABLE Bsdpjzhp Taofx Apvelk * Electro-hydraulics for comfortable lowering * Aluminum rod lashing rail, rubberized, on the side * Locking bar * Body: Plywood elements with GRP surface Dimensions (cargo space/loading area) Cargo space length: 3,800 mm Cargo space width: 1,800 mm Cargo space height: 1,900 mm ----Price: 9,900 Euros + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and ????? Typographical errors, errors and prior sale are subject to change.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: F 36905, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 2,000 rpm, controller model: HEIDENHAIN TNC 360, TECHNICAL DETAILS Travel X-axis: 7,000 mm Travel Y-axis: 1,200 mm Travel Z-axis: 1,300 mm Rapid traverse x/y/z: 10 m/min Table size: 8,000 x 1,300 mm Table load capacity: max. 4 t/sqm Universal head: 5x90 plus manual 1 Tool holder: SK 50 Milling spindle speed range: 20 – 2,000 rpm Drive power: 30 kW Bedpfx Apjy Rrbhsvelk Spindle torque: 2-speed gearbox, 750 Nm MACHINE DETAILS Control: HEIDENHAIN TNC 360 Total power requirement: 50 kW Dimensions & Weight Space requirements approx.: 9.0 x 3.8 x 4.6 m Machine weight approx.: 25 t EQUIPMENT Orthogonal milling head, water-cooled 3D radio probe M&H 20.41 Partition wall for parallel machining/setup Internal air blast Internal coolant supply 15 bar Adapter for high-speed milling spindles with torque support Operator platform travels with machine Chip conveyor Electronic handwheel HR 410 Monitored safety fences Various optional accessories (angle milling heads, clamps, etc.)

Condition: used, empty load weight: 18,240 kg, maximum load weight: 45,760 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 02/2012, loading space length: 12,120 mm, loading space width: 2,740 mm, loading space height: 550 mm, tire size: 285/70R19.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, forced steering, lifting + lowering, ABS (anti-lock braking system), lashing rings. Bjdpfx Apoyf E E Usvolk Body: Low-bed trailer with 3 hydraulically steered axles and jeep dolly. Including a jeep dolly with a 10t SAF axle and 295/80R22.5 tires! At the rear: 3 x 12t SAF axles! Extendable to 3.2m width, 8m low bed platform! With radio and cable remote control, automatic self-alignment. A detailed technical description is available and can be sent by request! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, BPW axles Bedpfxoi Rqvto Apvolk Superstructure: Axles are reinforced, drum brakes are installed (8 in total), with and without spring accumulators, tires 285/70R19.5, price per axle! Without wheels. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, sheet thickness: 13bending length: 2550upper roll diameter: 270sheet length: 2550 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- Bljdpfod Ab R Tox Apvek - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.690,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 2600sheet thickness: 13upper roll diameter: 270sheet length: 2600 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox Bledpfx Aod Ab Tdopvjk - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 6.690.00 We have many references!

Condition: good (used), Year of construction: 2021, fuel type: diesel, Weights Empty weight: 21.031 kg Functional Mast: articulated arm Lifting capacity: 272 kg Working height: 4.230 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 2197 m Max swing of platform in degrees: 360 Transport dimensions (LxWxH): 12,92x3,15 Production country: US Additional information Please contact Christian Theißen for more information Bsdpsyyah Isfx Apvelk Manufacturer: Genie Model: ZX-135/70 Year of build: 2021 Condition: Used Data: Max. working height: 42,30 m Movable up to working height: 42,30 m Platform height: 40,30 m Max. reach: 21,97 m Platform lifting capacity: 272 kg Platform dimensions LxW: 2,44 x 1,21 m Total dimensions LxWxH: 12,92 x 3,94 x 3,15 m Transport position LxH: 12,92 x 3,15 m Width: 2,51 m Track widening: 3,94 m Swivel range: 360°, Endless Gradeability: 45 % Ground clearance: 0,38 m Drive type: Diesel Empty weight: 21.031 kg Special features: Rotatable work basket, basket arm/rotation angle 160°, hydraulic, all-wheel drive, pendulum axle, particulate filter, socket in the basket.

Condition: used, Year of construction: 2008, operating hours: 6,631 h, machine/vehicle number: Z13508740, color: other, Equipment: all wheel drive, Power internal combustion engine: 74 HP (54 kW) GVW: 20.267 kg Engine type: Deutz Diesel Mast: articulated arm Working height: 4.315 cm CE mark: yes Machines for Sale! Bodpfx Apey R Uggovolk Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Year of construction: 1976, condition: used, Embossing machine Kolbus PE - PE 70 Year: 1976 Tandem configuration consisting of 2 interconnected Kolbus PE 70 embossing machines. - Case pre-stacking conveyor - Case bending station: DBA - Foil transporting device Blsdpfxjzat H As Apvsk - Case infeed 90° swivelling

Year of construction: 2015, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 2015. This Negri Bossi 1300H-400 features a screw diameter of 40 mm and a real injection volume of 232 cc. It offers a maximum clamping force of 1300 kN and a max opening stroke of 420 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi 1300H-400 machine we have for sale. Contact us for further details. Blodpozfku Tefx Apvok

Condition: excellent (used), Year of construction: 2013, operating hours: 46,500 h, functionality: fully functional, clamping force: 130 kN, screw diameter: 37 mm, The Negri Bossi will looked after did low hours . The machine have full service history year of manufacture 2013 the machine have one single hydraulic core and on air eject Bjdpfx Aozcx Tmspvslk

Condition: excellent (used), Year of construction: 2016, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 141-100, clamping force: 3,700 kN, screw diameter: 70 mm, clearance between the columns: 710 mm, displacement volume: 1,175 cm³, injection pressure: 1,400 bar, injection weight: 1,060 g, mold height (min.): 300 mm, opening stroke: 710 mm, plate width: 1,070 mm, plate height: 990 mm, total length: 8,135 mm, total width: 1,890 mm, total height: 2,275 mm, overall weight: 16,000 kg, pump power: 1,07,000 W, Fully electric Negri Bossi injection moulding machine. Was operational in production until the end. Blsdpfx Apjyxpd Asvsk

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Bledszhvaaepfx Apvjk Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: ready for operation (used), KUKA 1FK7101-5AZ91-1ZZ9-Z S07 servo motor, serial number: YFVN50667049013, used, in good condition, 100% functional, scope of delivery as shown in the photos. Blodpfx Aezqxvvspvek

Condition: excellent (used), Year of construction: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of construction: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Injection pressure: 2041 bar Metering volume: 653 ccm Clamping unit: Clamping force: 270 t Distance between tie bars: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with horizontal injection units arranged in parallel Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control system with air valve Hydraulic core pull x 3 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements Bljdpfx Apozc Ntwjvsk Injection unit 1000H Screw diameter: 50 mm Injection weight: 446.8 g Injection pressure: 2016 bar Dosing volume: 491 ccm Dimensions Weight: 15000 kg Length/width/height: 6.90x1.78x2.34 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Blodpfxszc N Ihj Apvjk Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request