Used Tesla Thyristor for sale (45)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Hfodjyx Dwkspfx Acbeg Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: good (used), Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator -Manufacturer: Shimadian, Thyristor power controllers -Type: PAD36-Series -Number: 2x power controllers available Hjdjyhblcspfx Acbofg -Price: per piece -Dimensions: 430/260/H255 mm -Weight: 18.4 kg/pc.

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, - Compact tabletop model with user-friendly, parallel upward-opening door - Double-walled housing with blower cooling, low external surface temperature - Furnace insulation made of low thermal mass alumina material, allowing for rapid heating and cooling - High-quality heating elements made from molybdenum disilicide (MoSi2) Hfodpfxoytr Ekj Acbog - Low power requirements - Heating elements controlled via thyristors, ensuring extremely precise furnace control; wear-free and silent operation - High temperature accuracy inside the furnace chamber - Exhaust vent in the furnace ceiling Incl. PC: HP Compaq dx2300 Microtower Dx2300M/E2160/160hnd/1024L/4rf, Dual Core with Microsoft XP + DVD drive + 19" Philips monitor Model ID: 190B4CS/00 (Company: Bechtle, Heilbronn 26.09.2003 net €528 Inventory No. 5633) with Eurotherms iTools with Wizards pre-installed and on DVD, all necessary cables, keyboard, Logitech wireless mouse

Year of construction: 2009, condition: new, functionality: fully functional, Zinc electrolysis rectifier group supplied by Siemens consisting of : 1. Transformer 500 kA - power rating 2 x 16.78 MVA, primary voltage 6.3 kV, 50 Hz, secondary voltage 238 V, transformer cooling OFAF, 4 fans, 2 pumps 2. Two rectifiers DC100 kA, 125 V - number of thyristors mounting places 60 / 10 per phase, number of installed thyristors 54 / 9 per phase, thyristor T4301 N22 TOF, control range 85V to 125V DC, phase effect - per rectifier: 6-pulse, per group 12-pulse 3. Four DC – switches Ritter, Germany, type 2 x HCD-AI-D-100, 2 x HCD-AI-D-110, nominal current: 2 units 100 kA, 2 units 110 kA, motor drive 3 x 400V / 50Hz, auxiliary contacts 6 NO; 6 NC 4. Cooling group - cooling capacity 360 kW, type WFAF /water forced air forced/, internal water circuit 65% deionised water, 35% glycol, number of fans - 8 fans on outdoor heat exchanger, 2 coolers, conservator, cooling block group with pumps, heat exchanger with fans, pipes and consoles for cooling group 5. Control cubicled 6. Overall rectifier control is carried out with a Simatic S7-300 PLC, with a CPU317-2DP, as central unit For more details, please feel free to contact us! Hfsdpjudxb Rjfx Acbog

Condition: good (used), KHD Humboldt Vibrating Mill . Typ : Palla 20U . Hfjdex Ur Icopfx Acbeg Mach.No.: 20110 . Included : 4KW E.motor, Frame, Dosing-feeder with AEG DR 100/550 Magnetic vibrator of 220V. 0,5A., thyristor controller, Spare-bars and Funnel with AEG MV1 / 100-3 Magnetic vibrator of 220V. 0,34A.

Condition: used, Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, thyristor circuit breaker -Manufacturer: Jumo, thyristor power switch unused OVP -Type: TYA32-45/50.530 -Number: 2x switches available -Price: per piece -Dimension box: 60/50/H35 mm Hjdsgh Iwyspfx Acbjfg -Weight: 0.1 kg

Condition: good (used), Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator -Manufacturer: Gefran, power controller power regulator -Type: GTF-25-480 -Number: 5x power controllers available Hodpfxsubfyhe Acbjfg -Price: per piece -Dimensions: 150/60/H135 mm -Weight: 0.9 kg/pc.

Condition: good (used), Two Messer Griesheim UNITIG GW 450 TIG welding machines are for sale. Water cooling, proven thyristor transformer technology, simple operation, before gas supply - after gas, forced shutdown, ramp-down, crater filling, any material incl. weldable aluminum, HF ignition, stick electrode welding, 1-6mm, ammeter, change in aluminum penetration + points, rectangular sine in the AC Super Alu range. Hfjdpfx Asu Sqi Sscbog Weight: 420 kg The price is per welding machine.

Condition: ready for operation (used), Indramat TRK6-1U-380 / 60-K0 / 003 - TRK6-1U-380/60-K0/003 6-pulse thyristor control amplifier, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hfodpfx Acei Ebqmsbeg

Condition: good (used), Nabertherm High-Temperature Furnace 1600 °C The HT 04/16 - HT 450/18 high-temperature furnaces have proven themselves in the laboratory and in production for many years. Whether for quartz glass, glass-ceramics, the sintering of CIM components, or other processes up to a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction and compact, floor-standing design, these high-temperature furnaces are ideal for laboratory processes that require the highest precision. Excellent temperature uniformity and sophisticated details set unsurpassed quality standards. Tmax 1600°C Double-walled housing construction with fan cooling, resulting in low outer wall temperatures Heating from both sides via molybdenum disilicide heating elements High-quality fiber insulation with special backing insulation Side insulation, constructed from tongue-and-groove blocks, ensures low heat loss to the outside Durable ceiling insulation with special suspension Parallel swing door with chain guide for defined opening and closing of the door Labyrinth seal ensures minimal temperature loss in the door area Exhaust air vent in the furnace ceiling Heating element control via thyristors Hedpfx Ajwxwa Eecbefg NTLog Basic for Nabertherm controller: Recording process data via USB stick Maximum temperature: 1600°C Internal dimensions (mm): 200x200x200 External dimensions (mm): 830x370x590 Volume (L): 4 Connected load (kW): 5.2 Electrical connection: 3-phase Weight (kg): 150 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), Indramat 3TRM2-G11-W0 / 147 pulse-thyristor controller amplifier SN:3975, used, normal signs of wear, 100% functional, scope of delivery as per photos. Hfodpfx Aox Etviocbog

Year of construction: 2007, condition: used, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Hfedpfxox R Aq Tj Acbsg Sold with protective cover.

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling Hodpfsxrb Tgsx Acbefg - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Year of construction: 1986, condition: used, We offer for sale a complete paper roll rewinder with high utility value. The machine has undergone a range of significant upgrades, greatly enhancing its reliability, quality of operation, and performance. The unit is fully assembled and ready for immediate use. Technical Data: - Machine type: FAMPA KM36 slitter - Year of manufacture: 1986 - Manufacturer: Fampa Beliot, Poland - Working width: up to 2450–2500 mm - Max. working speed: up to 1000 m/min - Paper grammage range: 30–400 g/m² - Max. unwinding roll diameter: Ø 2000 mm - Max. winding roll diameter: Ø 1500 mm Machine Upgrades and Advantages: - Drive system upgrade – value approx. EUR 95,000. The old thyristor (DC) drive has been replaced with a modern system based on two Siemens (AC) motors. - New DIENES knife holder (Germany) – value approx. EUR 50,000. Completely new knife carriage, capable of operating up to 9 knives simultaneously. - GOHA ES automatic unwinder – value approx. EUR 70,000. - ProfiCool Genius PCG 300 01-NEB chiller – capacity 2.9 kW. - Control cabinet modernization – improved safety and operational reliability. Commercial Information: Hsdpfjx Sdctjx Acbjfg The machine is complete and in our plant storage. Location: 57-256 Bardo Availability: Immediate For further information or to arrange a viewing, please contact us.

Condition: new, Siemens 6SC6100-0GC10 AC-HSA FBG power supply and thyristor control, version E: D, unused, 100% functional, scope of delivery as per photos. Hfedpfsx Dxfkex Acbjg

Condition: good (used), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welder for vehicle manufacturing, tank construction, steel cabinet manufacturing, sheet metal processing, and the wire industry - Effortless welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardized rotary connectors - Only one connector each for welding current cable, control cable, and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Simple and user-friendly operation - All set parameters and process variables can be read at a glance - Changes to welding parameters only by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 welding times - 8 programs - Built-in unit - Automatic Mains frequency detection 50/60 Hz - Power failure-proof parameter storage - "On/Off" switching via button Additional configuration parameters (user-locked): - Program selection - Advance contact - Advance contact time - Two-hand interlock (Check) - Start signal interlock - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - First half-wave delay External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact Hjdpsq H Aqxjfx Acbsfg - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. ``` External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay progress contact - Relay ready Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC logo PDF files available under the Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, “4 Pcs. AEG OA 1750 / 900 – AS – GY” for Sale Manufacturer: AEG Type: OA 1750 / 900 – AS – GY Size: 1.750 x 900 (750)mm Magnetic Vibrator: MV G (8 kW) / MV 400 (7 kW) Hsdpfxou Tkras Acbefg Thyristor controller: Included Frame: With/Without With Stainless steel wear plate.

Condition: used, THERMATOOL HF welder CFI 200KW In excellent working conditions. Solid State HF welder: CFI200 Output power: 200 kW Welding frequency: 400 KHz Scope of supply - DC Power cabinet - HF cabinet with auto-match system and output busbar to coil holder - Single axis adjustment table - Operator HMI diagnostic system/controls - Closed loop Water cooling pump/heat exchanger - Spare electrical cards x 12 - Spare thyristors/power supplies(4) / spare auto-match drive belts - Approximately 40-45 induction coils in various sizes to suit tube range 19-89mm Solid State HF welder: CFI200 Hedpfx Acjymad Ijbefg Output power: 200 kW Welding frequency: 400 KHz

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Hfjdpfxjdx Suhs Acbsg Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-step switch and auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. This changes the performance data. .

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm Hfjdowu Tu Depfx Acbog 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24