Used Unbekannt Turntable Support Plate 3 Pieces for sale (76,742)

Condition: good (used), Flame cutting pliers, electrode pliers, hose assembly -Length: 3 m Price: per piece -Quantity: 5 available Dkodpsb A S Avjfx Akgen -Weight: 3.5 kg/piece

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear Dksdpfoxf A Niox Akgon -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 81 mm / 25 teeth / Module 3 -Tooth width: mm -Shaft: Ø 60 mm / inner Ø 38 mm -Dimensions: see photos -Number: 7x gear shaft available -Price: per piece -Dimensions total: Ø 81 x 175 mm -Weight: 3.1 kg/piece

Condition: excellent (used), Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt -Width: 50 mm -Length: approx. mm -Thickness: 3 mm -Quantity: 1 conveyor belt available -Dimensions: Ø 208 x 50 mm -Weight: 0.9 kg Dksdoiruizepfx Akgon

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Sprocket: 2 pinions, 3/4 inch 14 teeth -Diameter: 93 mm -Shaft mount: inner Ø 40 mm -Dimensions: see photos -Quantity: 70x sprocket available -Price: per piece Dkjdpev R Tvhsfx Akgsn -Total dimensions: Ø 93 x 80 mm -Weight: 1.5 kg/piece

Condition: good (used), Connectors, plugs, sensor modules -Connectors: 3-pin, 44 pieces Type: unfortunately without a designation Dkjdjul H D Djpfx Akgsn -Price/Sale: complete -Dimensions: 41/39/H17 mm -Weight: 2.2 kg

Condition: good (used), V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing Dkodpfx Aem At Hajkgen -V-belt pulley: 3-groove pulley 250/4 -V-belt width: 17 mm -Taper bushing mount: Ø 100/107 x 52 mm (can be replaced) -Dimensions: Ø 257 x 65 mm -Weight: 11 kg

Condition: used, Moving steady rest, moving steady rest, steady rest, lynette -Bezel: pneumatically tensioning, self-centering -Type: SLK 087-1070/3 -Rollers: cylindrical -Dimensions/clamping range: see photos Dksdjqddkrjpfx Akgjn -Dimensions: 365/225/H370 mm -Weight: 43kg

Condition: used, Gear, gears, spur gear Dksdpfxogt Rcrj Akgsn -Gear: 35 teeth -Shaft mount: inside Ø 60 mm -Measurements: see drawing in the photos -Dimensions: Ø 368 x 78 mm -Weight: 16 kg

Condition: used, Dovetail guide wedge bar, linear bearing, linear rail, linear guide, guide rail, linear guide rail, profile rail, slide rail -Guide rail: Linear guide rail, wedge-shaped for dovetail guide -Rail length: 265 mm -Total width: 21 mm -Rail height: 8/3 mm Dkedpfxouzn Idj Akgen -Dimensions: 265/21/H8 mm -Weight: 0.2 kg

Condition: good (used), Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform -Machine stairs: machine access -Step size: approx. 1050 x 260 mm -Height: upper step 610 mm Dsdjwubz Eepfx Akgekn -permissible load: kg -Transport dimensions: 1070/950/H205 mm -Weight: 52 kg

Condition: good (used), Crane block, crane hook, load hook, single hook, lower block -Load hook: for chain hoist -Load capacity: 3 t -Hook path: 6 m -Dimensions: 500/260/80 mm Dkjdpfewz Eb Nox Akgen -Weight: 11.8 kg

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool Djdpfx Ajwvhpxokgokn -Collet chuck: MK6 -Type: SWN301/3 MK6 SWN 301/1 GR32 -Clamping sleeve: Ø 7 mm -Dimensions: 80/70/295 mm -Weight: 5.6 kg

Condition: used, Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt conveyor belt Dkodpfeirui Tex Akgon -Width: 50 mm -Length: approx. mm -Thickness: 3 mm -Transport dimension: Ø 208 x 50 mm -Weight: 2kg

Condition: used, Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Inductive sensor: proximity switch -Type: unfortunately no type designation -Sensor cable: RSMV 3-224 -Number: 46x sensor available -Price: per piece Dkedpfeuxg Ikox Akgjn -Dimensions: Ø 45 x 25 mm -Weight: 0.1 kg/pc.

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, tube bending tool -Pipe Bending Tool: 1 piece -Profile diameter: 3/8" Dsdpemu Rnpofx Akgskn -Intake: Ø 36 mm -Dimensions: 100/75/H50 mm -Weight: 1.2 kg

Condition: ready for operation (used), Directly driven main spindle motor for AXA VSC-3-2600-S-SK50 + Deublin 1116-416-208 rotary feedthrough, used, normal signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dedpek Ru Dgefx Akgskn

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei Dkodpfxjynndre Akgsn 2900 € 1270 mm 1.2 mm 68 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4900 € 109.71 € Dsdpfjwirv Nox Akgekn 1050 mm 3 mm 2 mm 90 mm 2080 mm 700 mm 1250 mm 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, lifting cylinder, support cylinder -Hydraulic cylinder: support cylinder 2 pieces -Price: for both support cylinders -Stroke 820 mm -Piston rod: Ø 70 mm -Support foot: 440 x 355 mm -Total height: max. 2320 mm Dksdpfx Aketzrg Aegjn -Dimensions: 1500/540/350 mm -Weight: 300 kg/pc.

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m Dedpfx Akju Icdyegskn weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm *

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT Dsdpfxoxw D Ude Akgokn - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Year of construction: 2025, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 4 kW (5.44 HP), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty operations. It is especially used for bending materials up to 10 mm thick. Applications include bending of aluminum sheets, the manufacture of ventilation ducts, advertising panels, machine bodyworks and sheet metal components, and many other similar tasks. All models are equipped with planetary gearbox drive Dksdpfxex D Dfvj Akgjn High-strength shafts manufactured from SAE 1050 (CK 45) certified steel Welded steel main frames Manually openable top roll Mobile control panel Conical bending roller Centralized lubrication system Precise bending feature via braked motor and planetary gearbox Powered rear roll with up/down movement Top roll support system In compliance with EU Safety Directives (CE Certificate) User manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for mounting profile and pipe bending rolls Profile and pipe bending roll set Motorized lower roll with up/down movement Derlin ringed top roll for Alucobond bending Adjustable speed steps NC Control TECHNICAL SPECIFICATIONS Bending length: 2550 MM Pre-bending: 4/5 MM Bending: 5/6 MM Top & bottom roll diameter: 190 MM Min. bending diameter: 285 MM Main motor power: 4 kW Rear motor power: 1.5 kW Length: 4700 MM Width: 950 MM Height: 1300 MM Weight: 3400 KG

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Dodpfx Aksw Slctegekn Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: used, 3D Coordinate Measuring Machine ZEISS NUMEREX - Not Functional Granite Measuring Table, Granite Surface Plate, Measuring Table Model No. 3648-18, Serial No. X-1019, Year of Manufacture approx. 1986 Measuring Range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring Plate L x W 1525 x 1435 mm Usable Surface 1525 x 1100 mm Plate Thickness 305 mm Clearance Width in the Portal 1100 mm Probe Mount Ø 9.5 mm Compressed Air Connection 6 bar Power Supply 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads - Axis adjustment with pneumatic slide guide for X, Y, and Z axis - Plate mounted on base frame with 5 leveling feet, 3 support plates for the feet - Computer and software missing (not available and not included) → not functional! Space required for the measuring machine L x W x H 1600 x 1850 x 2200 mm Machine weight approx. 2.8 tons Plate is damaged on one side – see photo, otherwise in good condition Dkodjfy U Ewepfx Akgen

Condition: excellent (used), Working width ca. 2.600 mm Djdpjyrt Abefx Akgokn Working height ca. 1.450 mm Number of cylinders 6 St. down holder 3 St. Stable hydraulic hole press, hole plate press, or gluing press for gluing or fixing workpieces such as frames, panels, windows, or doors.