Used Valon Kone Vk-16 for sale (13,432)

Condition: excellent (used), Here we offer you a Kuka robot with a control unit. Kuka robot VKR 16-2 R1610 Control unit VKRC4-SC5 Kuka smartPAD handheld programming device The robot comes from a school and research department. Hour meter: 226.25 hours Axis data: Range of motion: A1 ±185° A2 -185° / 65° A3 -138° / 175° A4 ±350° A5 ±130° A6 ±350° Speed at nominal load A1 200 °/s A2 175 °/s A3 190 °/s A4 430 °/s A5 430 °/s A6 630 °/s Technical data: Maximum reach 1612 mm Maximum payload 20 kg Nominal payload 16 kg Nominal additional load carousel / swivel / arm 0 kg / 0 kg / 10 kg Positional repeatability (ISO 9283) ± 0.04 mm Number of axes 6 Mounting position: Floor; Ceiling; Wall; Any angle Mounting area 430.5 mm x 370 mm Weight approx. 245 kg Condition: used Ibodpfozdiudox Ab Ijb Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, lifting height: 6,000 mm, load capacity: 3,200 kg, DEMAG EKDR 3 complete trolley with hoist and travel motor, including all cables / festoon cable trolley / power supply lead / control switch (see last photo) Year of manufacture: 2007, Reeving 4/1, Gear ratio i=67, Load capacity 3200 kg, Lifting speed 6 m/min and 1 m/min Very good condition Many trolleys in stock, also available in other sizes Iodpfxsyyu S Uo Ab Ijbb

Condition: used, functionality: limited functionality, Year of construction: 2005, machine/vehicle number: HN-BB, operating hours: 12 h, Crane, overhead crane, bridge crane, gantry crane Load capacity / lever load: 3.2t - 3,200 kg Gauge: 9600 mm, overall dimension approx. 9800 mm Year of manufacture: 2005 Lifting height: 6 m Overall height from top of crane to hook: approx. 600 mm Head beam length with buffer: approx. 2450 mm Ijdpfszunz Aex Ab Iobb Crane is disassembled and available immediately. The following defects are present: 1) Control valve missing - wiring diagram is available 2) Connector housings for the lifting motor and drive motors are partially broken (rather thin plastic) Used condition Column slewing cranes and wall slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible; please inquire with your postal code. Collection preferred.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,200 mm, total height: 4,250 mm, filter area: 286 m², suction capacity: 18,000 m³/h, negative pressure: 3,500 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16 Year of manufacture: 2010 Cartridge filter elements, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 18.5 Kw Fan model: FR 501 Built-in frequency converter. Remote monitoring of the device is possible thanks to Donaldson's iCue technology. Capacity up to 18000 m3/h Inlet diameter: 630 mm Noise silencer included. New filter elements, custom-made according to the device's intended use, are also available on request. Stock number: 1155 Ijdpfx Absz Ayv Uj Isbb

Condition: good (used), Year of construction: 2013, functionality: fully functional, arm reach: 1,611 mm, For sale is a Kuka industrial robot, model KR 16-2. - 1x pedestal for the robot, height approximately 30cm - 1x KRC4 control cabinet - 1x KCP4 operator panel, 00-168-334 - Connection cables Ibjdpfx Abjzzacle Ijb - Shipping is possible for an additional charge.

Condition: used, Year of construction: 2000, machine/vehicle number: 11.985, functionality: unexamined, input voltage: 400 V, type of input current: three-phase, throat depth: 1,600 mm, Radial drilling machine Reform RB 50/16, year of manufacture 2000, machine no. 11,985. Iodpfx Aboz A Ulue Isbb Connection 400 V, 50 Hz, total power 6.5 kW. Drilling capacity in steel 50 mm, arm reach 1,600 mm. Equipment: Digital display Acu-Rite, clamping cube and clamping table with T-slots, T-slot base plate. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; dismantling and loading to be arranged. All information without guarantee.

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: type plate available, The Donaldson Torit dust extraction unit DFO 4-16 can be used for welding, cutting, and grinding. It is a non-ATEX unit. The accompanying fan is an ART 632 with a 22 kW motor (non-ATEX), designed for a flow rate of 16,500 m3/h. It was previously used in one of our factories for welding fume extraction. Ijdezwclzspfx Ab Ijbb It has since been replaced by dilution systems and is therefore no longer needed.

Condition: good (used), Year of construction: 2019, 16 ton crane trolley, Kone, CXT, (chassis, rope, hook) – used - : Price ex-location: now only €5,000 instead of €12,500 (net), dismantled and loaded! Not included in the sale: bridge, remote control, coil hook. Manufacturer: Kone Year of manufacture: 2019 Reference no. 200967176/10 Order no. 4501376439 Electric wire rope hoist Hoist type: CXT60410160SA5JDD0S Hoist serial number: 58704433 Load capacity: 16,000 kg Lifting height: 10.5 m Drum pulling force: - Rope length: - Classification: M5 Current consumption: 68.2 A Total output: 36.3 kW Hoisting motor Motor type: MF13XL200N260FA5132X-IP55 Isdpoy Iv D Uefx Ab Isbb Serial number: 58202098 Power: 35 kW Gearbox type: GEN410NB000-D Lifting speed: 11.20/0.22 m/min Serial number: 58664786 Rope speed: - Inspections Operating voltage: 400 V, 50 Hz Control voltage: 48 V Serial number: - Control type: D2H overload SG Control cable - set load: 17,600 kg Circuit diagram: 200967176 Manufactured to IEC Travel drive Chassis motor type: MF06LA200-132F95001E-IP55 Serial numbers: 58531833, 58531836 Gearbox type: GES342PS3BO-A Serial numbers: 58657454, 58657451 Power: 0.65 kW Track gauge: 2,000 mm Overall height: approx. 65 cm Carriage type: M Wheel tread: 74 mm Flange width: - VFD serial no.: 37E43K2T18250130 Trolley travel speed: 32.0 m/min/- Original new price: approx. €20,000 Dismantling, including disconnection, will be professionally carried out by KONE. You will also receive the complete crane documentation and inspection book. Condition: good – very good Available: immediately Location: Niedernberg near Aschaffenburg Additional photos on request! Wiring diagram available as PDF, as well as operating manual, installation instructions, spare parts list, master data sheet, declaration of conformity, inspection book.

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Ibjdpfsw H I R Rsx Ab Isb Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 pcs Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production use • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) • Safety light curtain (Sick) • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Condition: used, Quantity: More than 10 available Used safety module / fieldbus module for industrial automation and PROFINET applications from Murr Elektronik. Manufacturer: Murr Elektronik Model: MVK-MPNIO F DI16/8 7/8" IRT Article number: 5556 Device type: Safety device / safety module Isdpfxjzi Dx He Ab Iobb Communication: PROFINET IO IRT-capable: Yes Digital inputs: 16 safe inputs / 8 channels Connection type: 7/8" connector Application area: Industrial automation technology Mounting type: Field mounting

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, operating hours: 4,873 h, load capacity: 1,600 kg, lifting height: 4,300 mm, free lift: 1,300 mm, fuel type: gas, mast type: triplex, construction height: 1,970 mm, motor manufacturer: VW, fork length: 1,200 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 6.00 - 9, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 2,862 kg, total height: 1,970 mm, total length: 2,250 mm, total width: 1,100 mm, fuel: liquid petroleum gas (LPG), CLARK CGP 16 – LPG forklifts TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.300 mm Closed height: 1.970 mm Free lift: 1.300 mm Mast: Triplex (3F430) Fork length: 1.200 mm Fork carriage: 2 A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 6.00 - 9 %) / 18 x 7 - 8 (60%) Service weight: 2.862 kg Iodsz Aqfaspfx Ab Ijbb Length: 2.250 mm Width: 1.100 mm Year of manufacture: 2001 Operating hours: 4.873 h Condition: ready to drive EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights Internal no.: 1202061 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), functionality: fully functional, 1 x Chip conveyor GS Industrietechnik Ijdpfx Abjzz I I Nj Iebb Type: K-I-150 Year of manufacture: 2017 Suitable for Traub TD 16/26/36 The chip conveyor can be inspected while powered on.

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, load capacity: 4,000 kg, Manufacturer: KONE Hint: MK10L1 Year of manufacture: 1986 Span: 9.3m Payload: 4t Iodpfxjumt Iro Ab Isbb Lifting height: 6.3 m Wired remote control Net weight: 2550 kg More sizes in the photos.

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is our Reis welding robot in good condition. Iedpfxowra S De Ab Iebb The welding robot is being offered complete with enclosure and is available immediately. (Technical data can be found in the photos) Type: Reis RV 20-16 Control and operator unit PHG 10-2 The system is located at our facility in Hungary / 2699 Szügy and will be sold from site. (Disassembly possible after consultation with buyer) We would be happy to welcome you for an inspection and demonstration of the system (by appointment). The system is sold with an unperforated welding table only!!!! (see last photo) The perforated version is not included in the sale.

Condition: repair required (used), functionality: limited functionality, Year of construction: 2015, operating hours: 14,180 h, load capacity: 1,600 kg, lifting height: 3,140 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,140 mm, gearing type: other, battery capacity: 475 Ah, battery voltage: 48 V, fork length: 1,000 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 16x6-8, overall weight: 3,654 kg, total height: 2,140 mm, total length: 2,200 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, LINDE E 16 PH-02 / 386 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.140 mm Closed height: 2.140 mm Isdsz Aqt Ropfx Ab Iobb Free lift: 1.500 mm Mast: Duplex (2F314) Fork length: 1.000 mm Fork carriage: 2A Drive: Elektro Battery: 48V/475 Ah (2015) Charger: ohne/without Transmission: Impuls Tyres: Superelastik 18x7-8 (40%) / 16x6-8 (10%) Service weight: 3.654 kg Length: 2.200 mm Width: 1.100 mm Year of manufacture: 2015 Operating hours: 14.180 h Condition: in need of repair EQUIPMENT 3rd valve, Rear work lights, Front work lights ATTACHMENTS Sideshift Internal no.: 1308362 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: new, weight 1350 kg diameter 1760 mm height 1240 mm Isdpfx Abeymf Iro Isbb 0 1210 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: good (used), Year of construction: 1982, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: Ijdpfoz Akgksx Ab Iobb - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: HB32-305, Hydromat HB32/16, double cycle, year of manufacture 2020, location: LOGA Präzisionsteile GmbH, Himmelreich 4-6, 78554 Aldingen. Control: Bosch MTX, HME operating interface Coolant system: Knoll (oil), vacuum rotary filter, low-pressure and high-pressure pumps for internal tool cooling Machine table with 8 collet chucks and 8 two-jaw chucks 1x Stäubli robot for transferring workpieces from the first to the second clamping position 1x loading magazine, 4.2m Iodpjy Nkhdofx Ab Iebb 1x VE 40/80 sawing unit 8x feed units: VE 36/100 or VE 35/60 5x CNC 50/100 turning units 2x 3-axis CNC milling units Nordmann tool monitoring Pickup conditions: The machine base measures approximately 4 meters in length, 3 meters in height, and 2.5 meters in width. The weight is approx. 6 tons. The other components are demountable. The hall is very spacious. There is no crane runway; a forklift is required for disassembly. No forklift is available on site! The aisles are 3 meters wide. There is a large roller gate, and trucks can drive directly up to, or even through, the gate for loading.

Condition: used, mileage: 4,87,792 km, power: 120 kW (163.15 HP), first registration: 11/2012, fuel type: diesel, number of seats: 17, gearing type: automatic, next inspection (TÜV): 12/2025, emission class: euro5, color: white, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle today, subject to final sale, errors, typos, and prior sale: Mercedes Benz Transfer 45 Bus Sprinter 516 CDI (Vehicle No. 451) First registration: November 20, 2012 487,792 km Engine: 2,143 cc 120 kW / 163 hp Euro 5 EEV Permissible total weight: 5,000 kg Unladen weight: 3,045 kg Payload: 1,955 kg TÜV (technical inspection): 12/2025, emissions test: 03/2025 Sprinter 516 CDI 16+1 seats Automatic sliding door on the passenger side with extending step Double-leaf doors at the rear Central locking with remote control Fully automatic transmission 2 x electric windows, mirrors, heated mirrors Microwave Iedpfx Ajz A I R Rob Iebb Auxiliary heater 2nd fan Front armrests Heated driver's seat Radio/CD Emergency exit, among others, through a roof window Tachograph Tires: 195/75R16, approx. 40% tread Price: €10,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €5,000.00 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, ABB Robotics IRB 2400/16 IRC5 M2004 robot Controller: IRC5 M2004 Number of axes: 6 Max. payload: 16 kg Max. working range: 1550 mm Year of manufacture: 12/2007 Serial number: 24-54029 Scope of delivery: Robot, controller, cables, teach pendant, wiring diagrams Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Isdpozmrggjfx Ab Isbb Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postcode. Freight costs upon request – please specify delivery address.

Year of construction: 1990, condition: used, Number of carriers: 16, an on-site inspection is possible. Ibsdpfxoz Da Rfj Ab Ieb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 11,558 h, load capacity: 1,600 kg, lifting height: 3,960 mm, free lift: 1,820 mm, fuel type: electric, mast type: duplex, construction height: 2,460 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 16x6-8, overall weight: 3,200 kg, total height: 2,460 mm, total length: 2,100 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-16 P – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.960 mm Ijdpfx Aoz Apqnsb Isbb Closed height: 2.460 mm Free lift: 1.820 mm Mast: Duplex (2F396) Fork length: 1.200 mm Fork carriage: FEM 2B Drive: Elektro Battery: 48 V/625 Ah (2016) Charger: ohne/without Tyres: Superelastik 18x7-8 (40 %) / 16x6-8 (50 %) Service weight: 3.200 kg Length: 2.100 mm Width: 1.100 mm Year of manufacture: 2006 Operating hours: 11.558 h Condition: ready to drive EQUIPMENT 3rd valve, Front work lights, Half cabin ATTACHMENTS Sideshift Internal no.: 1308826 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: like new (used), Year of construction: 2022, Track width: 6 m Year of manufacture: 2022 Serial number: 1306065 Payload: 16 kg Isdpozzbddefx Ab Ijbb Reach: 2013 mm Weight: 296 kg Number of axes: 6 Control system: KR C4

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 15,868 h, load capacity: 1,600 kg, lifting height: 4,630 mm, free lift: 1,420 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: VW, fork length: 1,200 mm, tire condition: 10 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,158 kg, total height: 2,250 mm, total length: 2,300 mm, total width: 1,120 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, STILL RX 70-16 T – LPG forklifts TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.630 mm Closed height: 2.250 mm Free lift: 1.420 mm Mast: Triplex (3F463) Fork length: 1.200 mm Fork carriage: 2A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 18 x 7 - 8 (10%) / 18 x 7 - 8 (10%) Service weight: 3.158 kg Length: 2.300 mm Width: 1.120 mm Year of manufacture: 2020 Operating hours: 15.868 h Iodpfoz Aqhnsx Ab Isbb Condition: ready to drive EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift, Fork positioner Internal no.: 1202054 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 119, spindle motor power: 5 W, turning length: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 99 rpm, turning diameter: 16 mm, overall weight: 2,300 kg, type of input current: three-phase, bar passage: 16 mm, total width: 1,340 mm, total length: 1,850 mm, total height: 1,685 mm, input voltage: 380 V, number of driven tool stations in tool turret 1: 6, number of driven tool stations in tool turret 2: 6, Equipment: documentation/manual, rotational speed infinitely variable, I am offering my lathe for sale, complete with the accessories shown in the pictures. It includes a bar feeder and a chip conveyor. Iodpfxjy Udcfj Ab Ijbb The machine is controlled by a Yasnac CNC system. The machine has two turrets, allowing for multi-axis and multi-group control.