Used Weiler C 30 for sale (69,130)

Condition: good (used), Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips -Grain: see photos Kdsdpferxw E Nex Accjl -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg

Condition: good (used), Safety relay, safety control, emergency stop switch, switching device, safety sensor, safety switching device, evaluation device -Manufacturer: pilz, safety relay safety switching device from vertical lathe Scherer VDZ 80 DS -Type: PNOZ XV3.1 30/24VDC 3n/o 1n/c 2n/o1 .: 774530 102997 Kodpfxsvun Ite Accsdl -Number: 1x relay available -Dimensions: 90/90/H120 mm -Weight: 0.6 kg

Condition: excellent (used), Year of construction: 2000, x-travel 3000 mm Kedpfxexb Eg Ne Accsdl y-travel 1400 mm z-travel 1600 mm control DEA B3C-LC workpiece weight 4500 kg table surface area 4730 x 1465 mm tool taper RENISHAW PH10M weight of the machine ca. 4 t dimensions of the machine ca. 4 x 3,8 x 3 m

Condition: excellent (used), Vötsch Kjdpjw S E N Tofx Accsdl Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Kdjdpfx Acowc Nvgjcel Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a BIA multifunctional cabinet. BIA Multifunctional Cabinet Temperature range +15°C to +30°C and humidity Refrigerant: R-404A 230V 50Hz 10A Type: C890TH Ksdpfxefktnyj Accjdl For you as a buyer the following information for your safety! The following points are carried out at our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Year of construction: 2010, condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) Kdodpsrbiyfofx Accel (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 1997, x-travel 1660 mm y-travel 760 mm z-travel 660 mm control Mazatrol M Plus table surface area 2000 x 760 mm table load 1,0 t rapid traverse 24 m/min turning speed range 7000 U/min power capacity - milling spindle 11 kW tool taper SK 40 | | no. of tools in the magazine 2 x 24 Stück weight of the machine ca. 8,1 t dimensions 4,2 x 3,2 x 2,8 m Vertical Machining Center traveling coloumn Kdodpfxoh Hgmze Accel - internal coolant - chipconveyor - ext, hand wheel

Condition: ready for operation (used), Gero F 100-200/12SO high temperature furnace 201101895 - 30 - 3000°C / Cable length green: 3.9 m, connection cable: 3.00 m, used, good condition, 100% functional, scope of delivery as per photos Kdsdpox Erpnofx Accol

Condition: ready for operation (used), Year of construction: 2004, operating hours: 48,702 h, functionality: fully functional, machine/vehicle number: 16261, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik 840 D pl , spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Travel Paths X-axis travel: 650 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Main Spindle Spindle speed range: 20 – 28,000 rpm Spindle drive power: 23 / 18 kW Max. torque: 79 Nm Tool taper: HSK-A63 NC Rotary Swivel Table Clamping surface: Ø 630 mm Swivel range A: +30° / -115° Rotatable C: 360° Max. table load: 500 kg Max. workpiece dimensions: Ø 630 x 313 mm Table rotation speed A: 25 / C: 65 rpm Tool Changer Number of tool stations: 117 Max. tool diameter: 90 mm Max. tool length: 300 mm Feed Rates Rapid traverse (X / Y / Z): 60 m/min Acceleration: 10 m/s² Feed force: 8.5 kN MACHINE DETAILS Control: Siemens Sinumerik 840 D pl Space Requirement & Weight Required space approx.: 8.5 x 5.5 x 3.0 m Machine weight approx.: 10,500 kg Total power requirement: 43 kVA Ksdjxbz A Hspfx Accsdl Operating hours: 48,702 h EQUIPMENT - Documentation - High-pressure cooling - Coolant system - Internal coolant supply: 80 bar / 1,300 l - Electronic handwheel - Fully enclosed cabin - FASTEMS pallet pool / 15 positions - Chip conveyor - Paper band filter - Renishaw probe - Tool breakage monitoring Note: Transport lifting gear must be provided by the buyer. The pallet system cannot be observed under power. The Fastems controller is defective.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Kodpovrxd Hjfx Accedl Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Condition: used, C 30 VRT, Ulvac, compressor unit Model: C 30 VRT Kdedpfx Ajuizmmoccsl Condition: Used

Condition: used, axle configuration: 3 axles, first registration: 04/1984, color: other, Year of construction: 1984, Empty weight: 5.960 kg Axle 1: left 10mm right10 mm Kdsdpfjyh D R Sjx Accjl Axle 2: left 10 mm right 10 mm Axle 3: left 10mm right 10mm We have the possibility to stack trailers!

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Kdodpfswhvrrjx Accjl Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Condition: used, axle configuration: 3 axles, first registration: 02/1984, color: other, Year of construction: 1984, Empty weight: 6.080 kg Axle 1: left 6 mm right 6 mm Axle 2: left 10 mm right 10mm Axle 3: left 6 mm right 6 mm Kdjdpsxu Dlqofx Accol We have the possibility to stack trailers!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. Kjdpfjq H Shcsx Accsdl You can leave us a message if you need a different model or a different type of crusher.

Condition: good (used), Bandall BA 24/15-30 Banding Machine One of the most recognizable banding machines in the world, a market leader. Manufactured by Bandall, the Netherlands. Machine in very good condition, recently serviced. Year of manufacture: 2016 Kdodpfxjy Sfays Accjl The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone frame with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Controlled via an LCD panel. Technical specifications: Tape width: 30 mm Performance: 36 cycles/min Machine opening dimensions: 320 x 160 mm A roll of film is included.

Condition: good (used), Com J240/30 Banding Machine on a Base One of the most recognizable banding machine manufacturers on the market, manufactured in Japan. The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone structure with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for packaging business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Kdedpey Nzltofx Accjl Performance: 26 cycles/min Dimensions of the banded product: 240 x 150 mm Made in Japan. Weight: 70 kg.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Kedpfx Asy Ti Sisccodl Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B Kdjdsy Ti Nuopfx Accsl

Condition: excellent (used), Year of construction: 2017, Weiler Primus VCD (2017) Precision Lathe Manufacturer: Weiler Model: Primus VCD Precision Lathe Kdjdpfey Ti Ikjx Accel Year of manufacture: 2017 Condition: used, very good, as new, recently serviced according to factory specifications with acceptance protocol Scope of delivery: - Documentation

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Kdedpjy Ti E Njfx Accol Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Mach. No.: 1401 with guarantee Kdsdpfjg R S Rcjx Accol Accessories: - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new - Quick-change tool holder base body size B - Bed stop - Coolant device - Chip back wall - Operating instructions -used, as seen -

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Kdjdpfjv D Ip Nex Accel Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Center height: 180 mm Kjdemgaddopfx Accsdl Center width: 1000 mm Spindle bore: 56 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions - used, as seen -