Used Xrf Analyzer for sale (125)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). Pgedpozu Nvzsfx Alwjt - The system must be dismantled, packed and collected independently by the buyer.

Condition: used, This listing is for a Halo Labs Horizon Particle Analyzer The unit is in full working condition and is ready for immediate release (No PC/Monitor) The Horizon system from Halo Labs integrates Backgrounded Membrane Imaging (BMI) technology to accurately measure and characterize subvisible particles in a high-throughput, low-volume format. Originating from membrane microscopy, a USP lot release method, BMI images particles on a membrane surface. This fully automated, fluidics-free Horizon system employs disposable membrane plates and automated image processing for quick, reliable particle counts and sizing. Capable of characterizing particles in up to 96 samples per run using only 25 µL per sample, BMI is unaffected by solution refractive index, ensuring accurate measurement of translucent protein aggregates. Sophisticated image processing techniques are used to analyze and acquire particle data, beginning with a background image of the membrane. After filtering samples by vacuum and capturing particles, the membrane is re-imaged with sample particles on its surface. The sample image is meticulously aligned with the background and processed pixel by pixel to remove background texture, achieving high contrast for the particles. This imaging approach yields high reproducibility and minimizes interference from membrane texture or imperfections. Key Features: Backgrounded Membrane Imaging (BMI) technology for precise particle measurement. High-throughput: Capable of analyzing up to 96 samples in a single run. Low sample volume: Requires only 25 µL per sample. Fully automated, fluidics-free system for seamless operation. Pgodpfsxhgakjx Alwjt Accurate measurement of translucent protein aggregates, unaffected by solution refractive index. Sophisticated image processing for high reproducibility and minimal interference.

Condition: excellent (used), TA-Instruments Type: TMA Q400 TMA Thermomechanical Analyzer Pgedpfezdyz Tox Alwot Performance: Temperature range (max.) -150 to 1,000 °C Temperature accuracy ± 1 °C Oven cooling time (air cooling)

Condition: used, exhaust gas analyzer in carrying case kit with printer for oil, gas and solid fuels size of case length - 540 x depth - 400 x height - 110 mm Pgedpovimtkofx Alwot weight approx. 4.5 kg

Condition: refurbished (used), functionality: fully functional, ACEA xCELLigence RTCA Cardio Parameter Value / Description Application / use Real-time monitoring of cardiomyocyte contractility and viability; cardiotoxicity assessment Podpfx Asxiyfpslwegt Well format 96-well (E-Plate Cardio 96) Sampling / temporal resolution Entire 96-well plate read in ≤ 12.9 ms (i.e. ~12.9 ms per full-plate sweep) Impedance measurement accuracy / Accuracy: ±1.5 % (at 1 Ω) (plus some offset) repeatability Repeatability: 0.8 % Impedance dynamic range 20 Ω to 2 kΩ Output test signal 22 mV rms ±20%, with a maximum 5 mV DC offset at 10 kHz (also stated for 10, 25, 50 kHz) Communication interface USB 2.0 (from analyzer to control unit) Power / electrical input (analyzer) 100–250 VAC, 50/60 Hz, 25 W max Physical dimensions / weight (analyzer) ~ 40.0 × 40.0 × 9.2 cm (W × D × H) weight:

Condition: like new (used), machine/vehicle number: 00399, LT Industries – Quantum 1200 Plus, model 20 channel multiplexer • Real-Time Multi-Constituent Process Analyzers • Multipoint, Fiber Optic Multiplexing Capability • Shock and Vibration Free The LT Industries Quantum 1200 Process Analyzer Series is comprised of the rugged, rapid scanning Quantum 2000 and 1200 Systems which were developed for both Pilot Plant and dedicated stand-alone installations in closed-loop-control of manufacturing processes. Using rugged, proven technology, LT Industries' systems enhance quality control, increase yield and reduce waste by providing real-time analysis. The sampling process is non-destructive and non-extractive, involving none of the sample preparation required by other testing technologies. LT Industries' Quantum 1200 Process Analyzers provide continuous multiple analyses in real-time. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions. These systems deliver the real-time data output that has made LT Industries a recognized NIR leader in process measurement for control. Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for LT Industries. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder. T Industries' Quantum 1200 Process Analyzers provide continuous multiple analyses in real-time. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions. Our systems deliver the real-time data out-put that has made LT Industries a recognized NIR leader in process measurement for control. The Quantum 1200 Process Analyzer Series combines analytical power and intelligence with ease of use in an integrated systems package. A pre-dispersed, monochromatic beam of light travels through the patented harmonic drive grating mechanism, where is it separated into discrete wavelengths and sent through a fibre optic link to illuminate the sample. The light transmitted back through the fibre optic link is converted into an electrical signal, which is compared by the microprocessor to the calibrated responses in memory. The data output results of this comparison are then used for process control Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment Psdpfxsg Tdwvj Alwegt Delivery condition, FCA: Oradea/Romania We can deliver/export everywhere in the World. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Thermo Fisher Scientific iCAP 6300 Duo ICP-OES Spectrometer Manufacturer: Thermo Fisher Scientific Model: iCAP 6300 Duo Pgodpszki Ipjfx Alwjt Series: iCAP 6000 Machine Type: ICP-OES Emission Spectrometer / Elemental Analyzer Part No.: 8423 100 63081 Origin: Made in England For sale is a used Thermo Fisher Scientific iCAP 6300 Duo ICP-OES emission spectrometer. This laboratory instrument is suitable for simultaneous multi-element analysis of liquid samples in laboratories, research institutions, quality assurance, and in the chemical, pharmaceutical, and metal processing industries. The Duo technology enables both axial and radial plasma observation and ensures high sensitivity with a wide linear measurement range. Technical Data Measurement Principle: ICP-OES (Optical Emission Spectrometry) Design: Duo (axial and radial plasma observation) Optics: Echelle Spectrometer Detector: CID86 Wavelength Range: 166 – 847 nm Spectral Bandwidth: approx. 0.007 nm Supply Voltage: 100 – 240 V AC Mains Frequency: 50 / 60 Hz Power Consumption: 4000 VA Dimensions (W × D × H): approx. 832 × 744 × 589 mm Weight: approx. 85.5 kg Equipment Echelle Optics CID86 Detector Duo Technology (axial / radial) Solid-State RF Generator Optics purging with nitrogen or argon Peristaltic Pump Water-cooled Spectrometer System Laboratory instrument for simultaneous multi-element analysis Accessories as shown in the pictures Application Areas Environmental analysis Water analysis Chemical analysis Metal analysis Pharmaceutical industry Food analysis Quality assurance Research and development Universities Testing laboratories Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table or other items not explicitly mentioned in the photos are not included in the sale. Scope of Delivery Thermo Fisher Scientific iCAP 6300 Duo ICP-OES Spectrometer Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), DIASORIN Liaison Type 2229 Immunodiagnostic Analyzer The LIAISON analyzer combines a flexible operating module with a broad assay menu and, thanks to its long walk-away time, results in high efficiency. The ability to run up to 15 different assays simultaneously ensures efficient daily testing, even with a small number of samples. Developed for immunoassay testing, the LIAISON analyzer uses "flash" chemiluminescence (CLIA) technology with a paramagnetic microparticle (MP) solid phase. Efficient from the start, the LIAISON analyzer allows for continuous sample and reagent loading, and the workload can be processed in random access or batch mode. All test methods are based on an internal master curve with 2-point calibration. Autodilution, repeat, and reflex tests are performed upon operator request and automatically by the system. The LIAISON system also features a STAT function to improve lab efficiency. Item condition: used Scope of delivery as shown Pgedpfxsu D D N No Alwet Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an automated cell culture analyzer that measures up to 15 key cell culture attributes. Pedpfx Aeq Tp Tdslwegt By combining up to five separate instruments into one user-friendly instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to multiple instruments. The FLEX autosampler collects samples from its two fermenters and transmits them to the FLEX analyzer's measurement unit. The data obtained by the FLEX autosampler was compared with data manually collected from the reactor, and statistical analysis was performed. Specifications Sample analysis time: 2.5 minutes (gases only – PO2 + PCO2), 4.0 minutes (chemistry/gas and osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15–30°C (59–86°F), Relative operating humidity range: 20–85% Sample size: 1 mL (for all modules) Sampling options: Single via syringe/beaker Automated batch with 20-position sample tray Online, automated from up to ten bioreactors Electrical requirements: 90–264 VAC, 50 to 60 Hz (universal power supply) System size: Height: 20 in (50 cm) Width: 26 in (66 cm) Depth: 20 in (50 cm) System weight: Analyzer: 94 lbs (42.6 kg) without Reagents Modular test menu options Chemistry/Gases Cell Density/Viability Osmolality IgG System integration options Online autosampler Sample collection system OPC connectivity Find more items – new and used – in our shop! International shipping costs on request!

Condition: like new (used), Panametrics Series 5 Hygrometer Moisture Analyzer We sell the complete box, like in the pictures Pjdpfx Asg Thuaslwsgt Price Euro 900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Mettler Toledo DSC 3 STARe System FRS5+ – Thermal Analysis System (DSC3/500) incl. accessories, PC, and balance Manufacturer: Mettler Toledo Model: DSC 3 STARe System Specification: DSC3/500 Description: For sale is a professional thermal analysis system, Mettler Toledo DSC 3 STARe System equipped with FRS5+ sensor. The device is used for the analysis of thermal material properties via Differential Scanning Calorimetry (DSC). The system comes from a professional laboratory environment and is in well-maintained used condition. The last maintenance by Mettler Toledo was carried out on 08/04/2025; the next maintenance is scheduled for 04/2027. Applications: - Research and development - Quality assurance - Material testing - Analysis of polymers and materials Functions: - Determination of melting points and glass transitions - Analysis of crystallization and phase transitions - Measurement of heat capacity (Cp) - Investigation of reaction kinetics (curing, decomposition) - Purity analysis - Determination of oxidation induction time (OIT) Technical data: - System: DSC 3 STARe System - Specification: DSC3/500 - Sensor: FRS5+ - Furnace power: 200 W - Cooling: air cooled - Lid: Automatic - Power supply: 230 V / 50–60 Hz - Fuse: 6 A - Power rating: max. 600 VA - Software: STARe Software V16.30 - Operating system: Windows 10 - Dimensions (approx.): 60 x 55 x 55 cm - Weight (approx.): 55–65 kg Workstation / PC: - Dell Optiplex control PC with monitor - Windows 10 installed - STARe Software V16.30 Additional equipment: - Thermal analysis package DSC3/500 - DSC 500 accessory kit - Crucible sealing apparatus - Mettler Toledo precision balance (analytical balance) - Weighing range: 42 g / 120 g - Readability: 0.01 mg / 0.1 mg Pjdey Drl Hopfx Alwjgt Scope of delivery: - Mettler Toledo DSC 3 main unit - Touchscreen control unit - FRS5+ sensor - Control PC (Dell Optiplex) with monitor - DSC 500 accessory kit - Crucible sealer - Precision balance - Accessories as shown in the pictures - Documentation and training materials - USB sticks / data media Condition: Used, from a laboratory environment, well-maintained. Notice: The scope of delivery is determined by the pictures. The table shown in the photos is not included in the offer. Miscellaneous: Commercial sale. Invoice with VAT available. Inspection possible by appointment. Subject to prior sale and errors.

Condition: excellent (used), DEWETRON DEWE3-PA8-RM Power Analyzer Manufacturer: DEWETRON System: DEWE3-PA8-RM Chassis Type Plate: DEWE3-RM8 Revision: 1.1 Device Type: High-End Power Analyzer Design: Stationary 19" Rack-Mount Power Analyzer Country of Manufacture: Austria For sale is a professional DEWETRON DEWE3-PA8-RM Power Analyzer in a 19" rack-mount design, with a built-in TRION3-1810M-PA power module, as well as the connection and measurement accessories shown in the pictures. This modular measuring system is designed for highly precise power analysis and integration into test benches. Typical applications include electric drives, inverters, energy storage systems, e-mobility, power electronics, as well as research and development test benches. Technical data: System: DEWE3-PA8-RM TRION(3) slots: 8 Installed power module: TRION3-1810M-PA Current configuration: 4-phase power analysis Measurement channels power module: 4 x voltage / 4 x current Sampling rate: up to 10 MS/s per channel Basic accuracy power analysis: 0.04% High voltage inputs: 4 x U1–U4 Voltage measurement range power module family: up to 1000 V RMS / ±2000 V Peak Safety category: CAT III 1000 V Supply: 100–240 V AC Frequency: 50–60 Hz Power consumption according to type plate: 500 W Sensor supply: Integrated redundant sensor supply ±15 V / 5 A +9 V / 0.6 A 8 sensor connections Equipment: TRION3-1810M-PA power module 4 high-voltage measuring inputs U1–U4 4 current / measuring channels I1–I4 CNT1 / CNT2 TRIG DC / AUX / Digital I/O SYNC IN / SYNC OUT Integrated industrial PC Interchangeable drive bays Ethernet / LAN USB interfaces COM1 / COM2 Display interfaces Free TRION(3) slots for expansion Application areas: Power analysis and power measurement Test bench technology Electric motors and electric drives Inverter and converter testing Battery and energy storage testing E-mobility / Automotive Power electronics Research and development Dimensions: Dimensions: 442 x 435 x 222 mm Weight: 15.8 kg Condition: Pgsdszyl Sispfx Alwjt Used Device can be switched on. Optical condition as shown in the pictures. Scope of supply: 1 x DEWETRON DEWE3-PA8-RM / DEWE3-RM8 1 x built-in TRION3-1810M-PA power module Measurement, sensor, and connection cables as shown in the pictures 2 x brackets as shown in the pictures Otherwise, scope of supply as shown in the pictures Shipping via UPS freight possible. Availability: upon agreement. Subject to changes, errors and prior sale.

Condition: used, This listing is for a Sysmex CA-50 Automated blood coagulation analyzer The CA 50 has 4-detector channel allowing random analysis of up to four different parameters in single or duplicate mode, providing convenience in coagulation screening. Reagent consumption is half of the manual method. Podpfx Aljxzhcgowogt

Year of construction: 2010, condition: repair required (used), Mastersizer hydro 2000s. Requires laser replacement, which we can perform. Price including replacement: €7,500. Technical specifications: Malvern Mastersizer 2000 particle analyzer for liquids with a Hydro 2000S module. Pgsdpfxsx Niiys Alwst The Hydro 2000S module can circulate from 50 ml to 150 ml of liquid. Variable pump/mixer speeds allow for the suspension and circulation of particles of different sizes and densities, while a variable power ultrasonic system enables the dispersion of particle agglomerates. The Mastersizer 2000 measures the particle sizes in the sample and displays their proportions on a computer in a graph. The measurement takes place as the particles pass between the detector array and the laser. Technical specifications for Hydro 2000S: Voltage: 220-240 V, 50-60 Hz Power: 240VA Maximum particle size: 600 µm Technical specifications for Mastersizer 2000: Voltage: 240 V, 50-60 Hz Power: 60VA Particle size: 0.02 µm to 2000 µm Lasers: Bxzqjbv8Dy Red: gas laser, wavelength 633 nm Blue: LED, wavelength: 466 nm This product consists of two separate units: Mastersizer 2000, Hydro 2000S, software included. Mastersizer External dimensions (W) x (D) x (H): 133 x 30 x 40 cm Hydro 2000S External dimensions (W) x (D) x (H): 34 x 35 x 34 cm

Condition: excellent (used), Spectro Type: Ciros Vision CCD Analysis device Ciros Vision CCD Overall height: 162cm, overall width: 150cm, overall depth: 90cm Adjustable extraction Total air flow rate: 500m³/h Condition: used Scope of delivery: (autosampler as shown in the picture) Podpfeziapuex Alwegt (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a Polychromix Phazir NIR spectrometer. Pgedozd Uhuepfx Alwot Portable near-infrared analyzer, Model: 1624. Specifications: Spectral range: 1600-2400 nm. Pixel pitch: 8 nm. Optical resolution: 11 nm. Stray light.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 100 kg, total width: 320 mm, total length: 640 mm, total height: 540 mm, Axioplan 2 Imaging, a universal all-in-one solution adaptable to any application. A flexible, future-oriented microscope system, controllable via computer or manually, capable of digital image capture and storage, and able to communicate with other systems – truly a digital microscope from A to Z. Eight filter positions with a full 25 mm field of view, easily accessible in a compact reflector turret: This means top performance without compromise and offers space for a wide range of filter combinations, Optovar modules, multi-channel fluorescence, and a DIC analyzer. Includes attachment for the AXIOPLAN photomicroscope. Pedpfx Aljytr Acowegt

Condition: excellent (used), HELMUT FISCHER X-ray fluorescence measuring device / film thickness measuring device FISCHERSCOPE X-RAY XDL-XYZpT8 Professional X-ray fluorescence measuring system for film thickness and material analysis For sale is a used X-ray fluorescence measuring device from the manufacturer Helmut Fischer GmbH + Co. KG, Germany. The FISCHERSCOPE X-RAY is suitable for non-destructive film thickness measurement and material analysis using X-ray fluorescence (XRF). The system is designed for measurements of functional layers, anti-corrosion layers, and various metallic coatings, and is used in quality assurance, laboratories, research, and manufacturing. Technical data: Manufacturer: Helmut Fischer GmbH + Co. KG Model: FISCHERSCOPE X-RAY Type: XDL-XYZpT8 Serial number: SN010002436 Made in Germany CE marking present Measuring system: X-ray fluorescence measuring device (XRF) For non-destructive film thickness measurement Suitable for functional layers and anti-corrosion layers Large measuring chamber with C-shaped slit Standard X-ray tube Proportional counter Fixed aperture and fixed filter DCM travel 0–80 mm Electrical data: Supply voltage: 230 V AC Frequency: 50–60 Hz Power consumption: 120 W Connections: Power connection Serial interface (Sub-D) Other connections as shown in the pictures Equipment: Helmut Fischer FISCHERSCOPE X-RAY measuring device Measuring chamber with protective cover Software Operating manual Additional accessories as shown in the pictures Areas of application: Film thickness measurement Material analysis X-ray fluorescence analysis (XRF) Quality assurance Electroplating Surface technology Material testing Laboratory Research and development Scope of supply: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Software Operating manual Scope of supply as shown in the pictures Condition: Used The device comes from a warehouse clearance. Optical condition as shown in the pictures. Important note: The device has not been tested by us and is sold explicitly as is and without warranty. Pgedpsz Egi Rsfx Alwjt The table shown in the photos, as well as other items not explicitly mentioned, are not part of the sale. Due to its size and weight, shipping can be arranged via a freight forwarder. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, functionality: fully functional, Beckman Coulter ACT Diff Hematology Analyzer. The AcT diff is an affordable, compact system that features the power of our proven histogram differential technology. Ideal for labs performing up to 50 CBCs a day, the Ac·T diff is a popular choice for the low-volume needs of today’s physician office labs and smaller laboratories. One-step sample processing is enabled by touch-screen user interface Automated probe wipe safely cleans the probe Small (12 µL) sample size permits whole blood analysis from both venous and capillary collections Compact design lets you put the Ac•T diff virtually anywhere Results available in less than 60 seconds Pgsdpeuptm Hofx Alwjt Good working condition. Please check out our other listings as well.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Parker Nitromatic PSA Nitrogen Production Plant – 600 Nm³/h – 99.5% Purity Description A complete industrial plant for nitrogen production using PSA (Pressure Swing Adsorption) technology, designed for continuous 24-hour operation and the production of high-purity nitrogen for industrial applications. The system incorporates air compression, drying, filtration, nitrogen generation, and storage, supplying up to 600 Nm³/h of nitrogen at 99.5% purity in a fully automatic manner. Technical characteristics: • PSA (Pressure Swing Adsorption) technology • Manufacturer: Parker Nitromatic • Nominal capacity: 600 Nm³/h • Nitrogen purity: 99.5% • Maximum generation pressure: 7 bar(g) • Continuous 24-hour operation • Fully automatic operation • Integrated alarm system • Continuous oxygen analyzer with permanent purity reading • Ultra-dry nitrogen • 10,000-liter nitrogen storage tank Included equipment: Compressed air • 3 Atlas Copco GA90 VSD FF compressors • Power per compressor: 90 kW • Variable speed drive (VSD) • Integrated refrigeration dryer • 2,000-liter compressed air tank Air treatment • High-capacity filtration system Pgedpfx Aljzm E Rfowjt • Parker MXS107 adsorption dryer • Air quality ISO 8573-1 Class 1.4.1 Nitrogen generation • 6 Parker NitroSource N2-80P generators • Total production: 600 Nm³/h • Integrated oxygen analyzer • Automatic PSA regeneration system Storage • 6 intermediate 1,000-liter tanks • 1 final 10,000-liter nitrogen tank

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was last used with aluminum powder AISi10MG. The 3D printer has already been dismantled by the manufacturer and was fully functional up to that point. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Trumpf TruPrint 5000 with the options Powder Bed Monitoring and Melt Pool Monitoring included. Filter system. Accessories: 2 pcs. build cylinders 3 pcs. dosing cylinders 1 pc. overflow container, used 1 pc. overflow container, new Manuals 4 pcs. heat exchangers, new 2 pcs. Easy Filter, new 3 pcs. NTRON SIL02 oxygen analyzer + sensor, new 1 pc. oxygen sensor, new and much more, such as seals, etc. Faster to high-quality 3D components Pgjdpfx Alsvu Syyjwet The highly productive, semi-automated 3D printing system TruPrint 5000 prepares you for industrial series production. With features such as an optional 500 °C preheating function and the full-field multi-laser system with three 500-watt TRUMPF fiber lasers, you are well-equipped for highly demanding industrial applications. The machine quickly and reliably produces high-quality components from various metallic materials – and meets the high quality requirements in tool and mold making, also through 3D printing on preform blanks, in the aerospace industry, and in medical technology. Optionally, the entire process chain can take place under a protective gas atmosphere: sieving, printing, cooling, and depowdering. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating > 200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based or titanium alloys Build rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 No warranty claims accepted. Maintenance and service are not offered.

Year of construction: 1999, condition: good (used), functionality: fully functional, SPECTROLAB M8 SPECTROMETER, designed for analyzing the composition of materials using advanced spectrometry technology. The system enables the identification and analysis of elements and/or the composition of materials for industrial applications, quality control, and material classification. It is used to measure aluminum and copper. • Analysis range/technology: optical emission spectrometer (Spark OES) that measures Si, Fe, Cu, Mn, Mg, Zn, Ni, Cr, Pb, Sn, Ti, Ca, P, Sr, V, Al. The equipment has been operating under normal industrial conditions until 2020. Psdezbtvgspfx Alwogt Suitable for material analysis, quality control, and characterization of compositions in industrial environments.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) Pgodpfx Aezpvdzjlwjt 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Scratch testing device for characterizing the adhesion and scratch resistance of thin coatings and bulk materials The scratch testing method involves scoring the surface with a diamond tip under a constant or progressive load. During the scratch process, the specimen moves under the video system to examine the various types of damages caused by the tip and correlate them with the applied load. The images can be digitized and precisely mapped onto emission, acoustic, and load diagrams. This standard procedure enables the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Podpfxjytrufo Alwsgt Features include an acoustic emission sensor, multi-pass scratch function (repeated scratching along the same track), friction force measurement, and the 2018 upgrade: new illumination system with analyzer, polarizer, 2 apertures and filters, plus high-resolution INFINITY 5X and 20X objectives, and lens holder with adjustment screws for easy tip/microscope calibration. Includes calibration set for table speed and applied load sensor.

Condition: used, The BV tests are intended for the detection of biological agents, including botulinum neurotoxins A, B, E and F, staphylococcal enterotoxin A and B, ricin and anthrax spores. BV tests use a sandwich immunoassay format. One antibody, specific for the pathogen to be measured, is immobilized on microparticles. The other antibody is labeled with the BioVeris BV-TAGTM label. The sample is mixed with these reagents. If the specific pathogen to be measured is present in the sample, both antibodies bind to it, effectively linking the microparticles, the organism and the BV-TAG label. The reaction mixture is then transported with an assay buffer to a flow cell with an electrode that stimulates the bound BV-TAG label to emit light. Only BV tests offer this unparalleled sensitivity and accuracy. BioVeris M1M Analyzer Psdpfx Aou Egxvolwsgt Incl. Toughbook Panasonic Mod. CF-29HTP44BM Plastic transport case (LxWxH)480x375x350 mm