Used  Plastic Binding Effect for sale (72,526)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Bdodpfx Afowlbxlj Ash Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), For sale: a Rapid 1514 shredding mill from the Range 15 series. The machine has been inspected and is in working order. It is suitable for shredding appropriately selected materials, including plastic waste. The unit features a feed hopper, a cutting chamber with blades, an electric motor, and a control panel with an emergency stop switch. The photos also show the interior of the working chamber. Bedpfxoz Ezuuj Af Aodh Data from the nameplate: - Manufacturer: Maskin AB Rapid, Sweden - Type: 1514 - Series: Range 15 - Year of manufacture: 1994 - Machine number: 260319 The machine is used and shows signs of wear, which can be seen in the photos. The condition and scope of equipment are shown in the photographs.

Year of construction: 2017, condition: used, Roll lifter (roll manipulator) for lifting and rotating rolls. Bdsdpszzkcvjfx Af Aoh Rotates rolls from a vertical to a horizontal position for easy assembly and allows for lateral movement, enabling effortless pallet handling. Lifting capacity: 100 kg Lifting height: approx. 155 cm

Condition: excellent (used), Year of construction: 2023, Biesse Akron 1330 A Edgebander Single-sided edgebander AKRON 1330-A Gluing Unit SP03 End trimming Unit IT03 Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 Tools are not included. GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM MANUAL INFEED SYSTEM FOR NARROW PIECES Bdodpoyyb Icjfx Af Aeh KIT FOR PROCESSING "SHADOW LINE" PROFILE PANELS STRAIGHT AIR TABLE AT THE MACHINE INFEED ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=2+2 30°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM TM15 HYBRID PREMELTER FOR EVA/PUR GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-4, NC AXIS ON FINE TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood AX-2, NC AXIS ON CORNER ROUNDING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit Pair of milling cutters, R = 1 mm, for corner rounding unit AX-4, NC AXIS ON EDGE SCRAPER PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper CLEANING UNIT LPT02 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, axle configuration: 3 axles, first registration: 09/2015, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2015, Axle configuration Tyre size: 385/65 R22.5 Axle brand: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: tyre tread left: 5 mm; tyre tread right: 2 mm Rear axle 2: tyre tread left: 6 mm; tyre tread right: 5 mm Rear axle 3: tyre tread left: 2 mm; tyre tread right: 5 mm Weights Unladen weight: 6,730 kg Payload: 32,270 kg Bsdpfx Ajz Ia Ewsf Aedh Gross vehicle weight: 39,000 kg Condition Damages: none

Condition: used, Year of construction: 2010, machine/vehicle number: 10A46 & 10A47, functionality: limited functionality, power: 110 kW (149.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 650 mm, total length: 20,000 mm, total width: 2,000 mm, total height: 2,100 mm, table height: 850 mm, LIMITED-TIME OFFER. Manufactured in 2010 by the renowned Italian brand A. Costa Righi, this professional woodworking setup, comprising the LEONE heavy-duty multi-ripsaw and the MAXI-CUT cross-cutting machine, is currently available in good to moderate overall condition, although it is currently stored partially disassembled in our warehouse. Bedpezxx Dvsfx Af Aodh

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), overall weight: 1,250 kg, total length: 1,300 mm, total width: 1,500 mm, total height: 2,140 mm, cutting length (max.): 500 mm, cutting diameter: 40 mm, number of blades: 5, rotor length: 400 mm, warranty duration: 12 months, MIZAR CMT Compact Series - All-In-One Copper Wire Granulator & Cable Recycling Machine The Ultimate Compact Solution for Maximum Copper Recovery The MIZAR CMT is an advanced, all-in-one cable recycling machine engineered for facilities with limited space but high-performance demands. Integrated with state-of-the-art Turbo Mill technology, it ensures the complete separation of even the finest copper wires (hair wires) from plastics, delivering maximum purity and scrap copper recovery in a single compact footprint. KEY ADVANTAGES & FEATURES • All-In-One Design: A complete, plug-and-play copper wire granulator engineered into a single, space-saving unit. • Integrated Turbo Mill Technology: Achieves exceptionally high purity by aggressively pulverizing and separating ultra-fine copper wires that standard granulators cannot process cleanly. • Optimized Input Capacity: Safely and efficiently processes scrap cables with a maximum thickness of up to 40 mm and a maximum feeding length of up to 50 cm. • High-Efficiency Copper Recovery: Highly effective in separating copper and plastic components, maximizing your recycling profitability. • Cost-Effective Operation: Energy-efficient drivetrain minimizes daily operational costs without sacrificing throughput. PROCESSED MATERIALS Bdedpjv Hbdrjfx Af Ajh • All types of scrap electrical cables, flexible wires, communication cables, and complex harnesses (Max Ø 40 mm / Max Length: 50 cm). Ready for an all-in-one cable recycling upgrade? Contact us for a customized quotation, technical details, or a performance test. Mizar Recycling Machinery

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights Bsdpfozu A D Ejx Af Ajdh - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Bodpfx Aezt H Uxsf Asdh Made in Germany.

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure Bdsdpfxszt H U Eo Af Aoh

Condition: excellent (used), Year of construction: 2011, cutting diameter 400 mm capacity 90 degrees: flat 500 x 400 mm saw band length 6220 x 41 x 1.3 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight ca. 250 - 300 kg/m Control MEBA NC coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. ca. 2250 kg range L-W-H 3100 x 1620 x 2150 mm Current list price: approx. 50.000 euros Special price available upon request Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only - User-friendly NC dialog control * With plain-text display 5.7-inch CE panel * Program memory with 50 programs, each with 20 steps - Automatic material feed * Minimum cutting diameter .. Ø 5.0 mm * Residual piece length without bundle clamping .. manual 25.0 mm * Residual piece length without bundle clamping .. automatic 110 mm * Automatic movement of the clamping blocks - Rapid-feed lowering of the saw frame * With automatic material detection - Band saw speed via frequency-controlled AC drive (15-150 m/min) - Automatic cutting pressure and feed monitoring - Driven chip-clearing brush via friction wheel Bdsdpfx Afsz Dkzuj Aeh - Hydraulic full-stroke material clamping - Saw blade angled 3° relative to the material support surface - Saw blade idler rollers with carbide guides - Manual saw blade tensioning - Removable coolant tank for easy cleaning - Operating instructions

Condition: excellent (used), For sale: a professional Constantin Hang Maschinenfabrik Göppingen bookbinding machine, model 167-11, manufactured in Germany. The machine is mounted on a large work table and equipped with a pneumatic control system and a foot pedal, allowing for convenient operation during use. Hang machines of this type were designed for professional bookbinding and production work. The design allows for easy handling and positioning of large sheets and other materials being processed. Bdjdpfx Afjzudblo Ash Specifications: Manufacturer: Constantin Hang Maschinenfabrik Model/Type: 167-11 Serial Number: 37886 Country of Manufacture: Germany Control: Pneumatic Operation: Foot Pedal Design: Stand-alone machine with work table Application: Bookbinding / Printing industry The machine is sold with the large work table shown in the pictures. Used condition. Shows normal signs of wear and tear appropriate for the age of the machine. The visual condition is consistent with the pictures. Made in Germany.

Year of construction: 1999, condition: ready for operation (used), travel distance X-axis: 600 mm, travel distance Z-axis: 2,290 mm, number of axes: 2, Cylindrical grinding machine manufactured in 1999. This Cetos BHU 50 A x 2000 features a swing diameter of 500 mm and a center distance of 2000 mm. It has a maximum grinding wheel width of 200 mm and can accommodate workpieces weighing up to 300 kg. If you are looking to get high-quality grinding capabilities, consider the Cetos BHU 50 A x 2000 machine we have for sale. Contact us for further details. Bdjdpfoz E Nfhjx Af Aeh - Z-Axis Travel (Longitudinal Travel): 2290 mm- X-Axis Travel (Cross Movement): > 600 mm (tested, capable of more)- Hydraulic Rapid Stroke (X-Axis): 120 mm- Max. Grinding Diameter: Minimum 500 mm- Grinding Wheel Diameter (New): 500 mm- Swing Diameter: 500 mm- Center Distance: 2000 mm- Grinding Wheel Dimensions (Diameter x Width x Bore): 500 x 80 x 203 mm- Grinding Wheel Diameter After Partial Wear: 380 mm- Minimum Ground Swing Diameter with Worn Wheel (380 mm): 70 mm- Maximum Grinding Wheel Width: 200 mm- Maximum Width of Multi-Piece Wheel Set: 200 mm- Maximum Sum of Individual Wheel Widths in Multi-Piece Set: 200 mm- Swing Diameter in Open Steady Rest: 110 mm- Swing Diameter in Closed Steady Rest: 110 mm- Taper in Workhead Spindle: MORSE 5- Taper in Tailstock Sleeve: MORSE 5- Clamping Chuck Diameter: 200 mm- Bore in Sleeve for Internal Grinding Spindle: 100 mm- Workhead Swivel Angle: +95° / -5°- Wheelhead Swivel Angle: ±45°- Upper Table Swivel Angle at 2000 mm Center Distance: +5° / -3°- Machine Weight with Standard Accessories (at 2000 mm Center Distance): 6700 kg- Workhead Spindle Speeds (Infinitely Variable): 18–112 min⁻¹ / 90–560 min⁻¹ (1st Row / 2nd Row)- Smallest Table Longitudinal Travel: 1 mm- Largest Table Longitudinal Travel (at 2000 mm Center Distance): 2290 mm- Cross Movement of Wheelhead: 415 mm- Hydraulic Rapid Traverse of Wheelhead: 60 mm- Table Speed (Infinitely Variable): 0.05–4 m/min- Cross Movement of Wheelhead per Automatic Infeed: 0.2 mm/ø- Cross Movement of Wheelhead per Automatic Infeed for Fine Grinding: 0.15 mm/ø- Automatic Infeed of Wheelhead at Table Reversals for Plunge Grinding: 0.0005–0.01 mm/ø- Automatic Infeed of Wheelhead at Table Reversals for Traverse Grinding: 0.005–0.05 mm/ø- Speed of Automatic Wheelhead Infeed During Plunge Grinding: 1 ⁻¹- Infeed Speed for Spark-Out Infeed: 0.015 ⁻¹- Total Power Requirement of Electric Motors: 16 kVA- Wheelhead Motor Power: 9.5 kW- Maximum Workpiece Weight Admitted Between Centers: 300 kg- Maximum Overhanging Workpiece Weight (Including Clamping Device): 60 kg- Table Infeed Advance: 6 m.min⁻¹

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 337, Kolbus DA 260 case-making machine - Device for applying inner lining with hot glue - Automatic case counter - Single case request for control purposes, initiated from the operating side - Infinitely variable drive - Safety standard compliant with CE directives and specifications Technical data: Size range of open case: min.: 205 x 140 mm max.: 670 x 390 mm Joint width: 4 – 15 mm Width between boards: 14 – 120 mm Turn-in width, closed: 8 – 15 mm Cloth: width: 223 – 708 mm height: 130 – 428 mm Boards: thickness: 1 – 4 mm width: 95 – 328 mm height: 140 – 390 mm Board center strip: thickness: 1 – 4 mm width: 6 – 90 mm Center strip roll: thickness: 0.3 – 0.6 mm width: 6 – 90 mm Inner lining dimensions, dependent on glue processing: width: 195 – 670 mm Bdsdpfsz Hlywox Af Ash height: 130 – 390 mm Do not hesitate to contact us for more information. The machine is still in production.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon Perfect Binder-D1” accessory Item for sale: 1 x Canon Perfect Binder-D1 Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Bdedpfx Afoz Et D Is Aeh Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, Muller Martini Pony 246 Number of binding clamps: 5 Maximum production speed: Up to 3,000 cycles per hour Typical production speed: Approximately 1,500–2,500 books per hour Maximum book thickness: Up to approximately 40 mm Minimum book thickness: Approximately 3 mm Binding method: Hot-melt adhesive perfect binding Book Format: Maximum book size: Approximately 400 × 240 mm Minimum book size: Approximately 140 × 100 mm Spine preparation: Milling and roughening station Features and Equipment: 5 binding clamps Automatic cover feeder Hot-melt spine gluing system Hot-melt side gluing system Milling and spine roughening unit Cover scoring/creasing station Book delivery conveyor Waste removal and dust extraction system (configuration dependent) Bodpfx Afjz Dh I Ej Aedh Glue system: Hot-melt adhesive.

Condition: new, functionality: fully functional, This is a brand-new conveyor dishwasher from the manufacturer Hobart, from the latest series, type FLOW Line 2-SN-A-R-DS5, FHP. Please note that the images shown are examples of the machine. Please note the overall length of 6550 mm. This machine is immediately available with a full manufacturer's warranty, at an attractive special price. If you are interested, we will send you all the equipment details by email. You will receive an invoice with VAT shown. The current new price is approximately €75,000 net. Technical data: Direction of travel: Left/Right Type of heating: Electric Plate capacity: 2830/3690 plates/hour Machine filling: Power-Boiler Dimensions: Machine length: 6550 mm Usable passage width: 612 mm Usable passage height: 440 mm Body width: 865 mm Body width including control cabinet: 980 mm Body height: 1960 mm Height including attachments: 2150 mm Infeed area: 740 mm Usable outfeed area: 1100 mm Connection values: Electrical connection: 47.1 kW Exhaust values: Exhaust volume: 350 m3/h Exhaust temperature: ~17°C Exhaust humidity: 90-98% Tank capacity: Tank volume for initial filling: 264 L Fresh water consumption: 145 L/h Regeneration water quantity: 60 L/h Further details: Model: Multi-tank conveyor dishwasher Type: FLOW Line 2-SN-A-R-DS5, FHP Items to be washed: according to DIN EN 17735 Direction of travel: Left/Right Type of heating: Electric Plate capacity: 2830 plates/hour Plate capacity max.: 3690 plates/hour Passage width/height: 612 mm/440 mm Hygiene performance: according to DIN EN 17735 Infeed component: Infeed 2 (L=110 mm) Pre-wash: Wash and neutral zone SN (L=1400 mm) Wash: Wash zone A (L=900 mm) Rinse: Rinse zone R (L=650 mm) Drying: Drying zone DS (L=1400 mm) Outfeed: Outfeed module 5 (L=1100 mm) Exhaust system: CLIMATE-PRO Condition: Factory new, full manufacturer's warranty, commissioning and transport directly from the manufacturer will be charged separately. Shipping: Delivery or self-collection by arrangement. Bdjdpfx Afsz Hvtuj Ash Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would you like a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Bedpexzu Rqjfx Af Asdh Technical condition – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos – Machine is ready for operation Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Condition: used, Year of construction: 2006, RAPID GK6090-KU Plastic Granulator – 75 kW Industrial knife granulator manufactured by RAPID GRANULATOR AB, Sweden, in 2006. Equipped with a 75 kW main motor and a V-cut rotor with five rows of rotating knives arranged in a V configuration. Technical specifications: Manufacturer: RAPID GRANULATOR AB Model: GK6090-KU Year of manufacture: 2006 Serial number: 81725.001 Main motor power: 75 kW Rotor diameter: 600 mm Rotor width: 900 mm Cutting system: V-cut Rotating knives: 5 rows arranged in a V configuration Power supply: 400 V, three-phase, 50 Hz CE marking Bdsdpfx Afjz Hmtxo Aoh + includes Blower

Condition: used, Year of construction: 2014, for sale Machine types + quantity: - 1 unit: Linear transport system for 14 stations, type: LT-14-270 (original from sp280) - 1 unit: Automatic loading station - 1 unit: New infeed station - 1 unit: Double spiral mixer + power box, type: W240A, no.: 7402-978 - 1 unit: Dough return station - 1 unit: Lift-tilt unit, type: HK1200 - 2 units: 2 mixing bowls, type: W240A - The frames and platforms for this line - 1 unit: 1 weighing hopper - 1 unit: 1 screw feeder - Power box - The small parts you need for the line Bdedpennz Hwefx Af Ajh Inspecting the line is possible on-site. If you have any questions or comments, please do not hesitate to contact us. The seller will carefully load all goods into the container/truck. The buyer will be responsible for arranging the transportation. Sincerely, Leo Holland

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, Profile sander FLADDER 300/L.S.4 Year of manufacture: 1996 Bodpfx Afoyrqzbo Asdh

Condition: used, Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles. Technical Data Capacity: 14,400 bottles/hour for 0.5 L bottles Products: Still and carbonated water Containers: PET bottles Bottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L; currently running 0.5 L bottles Labelling: PE Roll-Line Cap feeding system: Gravity 26 Pack formats: * Packs of 12 for 0.5 L and 1.0 L bottles Bjdpfez H U Ttex Af Asdh * Packs of 24 for 0.5 L bottles * Packs of 6 for 1.5 L bottles Pallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mm Condition: Used line Video: Machines and Equipment 1. PET blow moulding machine – Sidel SBO 8, year 2006 Including preform tipper, preform hopper, elevator, orienter and feed chute 2. Air conveyor – Lanfranchi, year 2006 3. Chiller – MTA, year 2026 4. Filling machine – SACMI Blu Star 28/40/10, year 1997 5. Capping machine – Arol, year 2011 6. Cap and fill-level inspection system – KBB, year 2023 7. Carbonator – SACMI, year 1997 8. Bottle conveyor – Sipac, year 2012 9. Labelling machine – PE Roll-Line, year 2020 10. Shrink wrapper – SMI LSK 45, year 2001 11. Pack conveyor – ACMI, year 2000 12. Handle applicator – COMAG H50, year 1998 13. Palletiser – KHS, year 2002 14. Pallet wrapper – Tosa, year 1994 Technical documentation is available. Price on request.

Condition: good (used), Schmedt PraKant Turning-in machine The PräKant is a turning-in machine designed to turn in and press down the edges during the production of book covers and other products. Weight: 150 kg Bdodpfx Afjz Dtb Rj Ajh Power supply: 400 V Flexible speed control.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 12,527 h, load capacity: 3,600 kg, lifting height: 4,700 mm, free lift: 1,570 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, fork carriage width: 1,020 mm, fork length: 1,300 mm, empty load weight: 5,420 kg, total length: 2,750 mm, drive type: Treibgas, construction width: 1,200 mm, Internal combustion forklift Load center: 500 ISO class: FEM 3 A Bsdpoz H E Tdefx Af Ajdh Mast type: Triplex Transmission: Automatic Technical condition: good Front tire type: Solid tires Front tire size: 2 x 22x9x16 Front tire condition: 0 - 20% Rear tire type: Solid tires Rear tire size: 2 x 18x6x12 Rear tire condition: 0 - 20% Battery year of manufacture: 2009 Additional single hydraulic circuit, side shifter, overhead guard, load backrest, lighting according to StVZO (German Road Traffic Regulations).

Condition: ready for operation (used), Year of construction: 2021, Edgebander manufactured in 2021. This BIESSE Akron 1440 A features a feed speed of 12–18 m/min and can process panel thicknesses from 10 to 60 mm. It includes automatic edgeband feeding from rolls and strips, along with a pre-milling unit and various trimming units for enhanced finishing. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical specifications: • Feed speed: 12–18 m/min • Feed motor: 1.5 kW • Panel thickness: 10–60 mm • Edge thickness (from rolls): 0.4–3 mm • Edge thickness (from strips): 0.4–12 mm • Glue pot capacity: approx. 2 kg • Glue heating time: approx. 10 min • Power supply: 400 V / 50 Hz / 3 Ph + N • Control voltage: 24 V DC • Processed edgeband: approx. 737,000 mIntegrated configuration/equipment: • Automatic edgeband feeding from rolls and strips Bdodpjz Dwlmefx Af Aeh • NC-controlled automatic group adjustment • Automatic program selection and diagnostics • Production statistics and maintenance software • Antistatic spraying unit • Pre-milling unit with 2 × 1.8 kW HF motors • Glue application and pressure unit • End trimming unit • Top/bottom trimming unit • Corner rounding unit • Radius scraping unit • Surface scraping unit • Textile polishing brushes • Cleaning liquid spray unit • Hot air blower Technical Specification Feed Speed 18 m/min