Used Double Feed for sale (20,344)

Condition: good (used), Manufacturer: Bühner Schaible Elektronik GmbH Lsdpfx Aoh Dimnockoab Type: th 15 / S2 Electrical data: 230 V / 50-60 Hz / 6A Diameter: 900 mm

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Lajdpfx Aexnlgceckjb Storage location: Garbsen

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix Ledjvwgm Hspfx Ackeab - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm Ljdsvwglvopfx Acksab spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6(40%/2 min) 41 kW max. torque on the spindle S6(40%/2 min) 49 Nm milling spindle motor S1(100%/2 min) 34 kW max. torque on the spindle S1(100%/2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m Laedpfevwgtyox Ackob This thermosymmetrical, ergonomic, universal ZIMMERMANN FZU32 portal milling machine is in mint condition and available immediately. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Laodpfjvwgmgox Ackob Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: excellent (used), Year of construction: 2001, x-travel 2200 mm y-travel 3200 mm z-travel 1250 mm Control FIDIA C20 c-axis +/- 200 ° milling-head swivable +/- +90 ° milling-head swivable +/- -100 ° feeds X-axis 50 m/min feeds Y-axis 50 m/min feeds Z-axis 50 m/min tool taper HSK A63 tool change unit 16 Pos. spindle turning speed range 18000 U/min distance between columns 4060 mm dist. milling spindle - table surface 1796 mm connected load 238 kVA weight of the machine ca. 45 t dimensions of the machine ca. 9 x 7 x 5 m This JOBS LinX6 is in very good condition and can be viewed under power by arrangement with the seller. Description: Jobs LinX6 Type: 5-axis milling machine with movable gantry and fixed table Control: FIDIA C20 Year of manufacture: 2001 Travel X: 2200 mm Y travel: 3200 mm Z travel: 1250 mm A-axis travel: +90° / -100° C-axis travel: +200° / -200° Max. feed rate in X/Y/Z: 50 m/min Table clamping surface: 4000 x 2500 mm Clearance between columns: 4060 mm Clearance height between table and portal: 1807 mm Clearance height between table and spindle nose: 1796 mm Milling head: T2K D.01.06 Tool holder: HSK A63 Tool changer: 16-fold Spindle power: S1 from 6800 rpm 40KW Spindle speed: 250 - 18000 rpm Total connected load: 238 kVA Special equipment: - Siemens linear motors in all axes - JIMS / preparation for semi-automatic motor spindle change - Replacement spindle as spare part - External coolant supply / 1000L tank - Minimum quantity coolant dosing - Scraper conveyor - Renishaw TS27 tool measuring system - Ethernet connection - Manual control module Lodjxa Hl Rjpfx Ackoab Other: Complete documentation available Machine weight: approx. 45 tonnes Space requirements: 8.7 m (width) x 6.7 m (depth) x 5.1 m (height)

Condition: used, 1 unit, double grinding stand, AEG DWSL 200/500 Laodpfxsy Th Ivs Acksb Color: as shown in the images, in accordance with the images and inspection Condition: used

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW Ljdpfx Aey R A Aceckoab - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Year of construction: 2024, condition: new, Rollers: 3 Roll width: 60mm Roll diameter: 120mm Spring travel: 20mm Speeds: variable 3 - 18 m/min. Lodpfjg Ez Smex Acksab Stand selectable: Delivery without stand / optional the following stands are selectable: Standard / 1050 / PLUS with counter Motor power: 0,75kW

Condition: used, empty load weight: 9,443 kg, maximum load weight: 29,557 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: other, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: other, Year of construction: 2024, gearing type: mechanical, EU-vehicle, Tare weight: 9443kg, GVW: 39000kg, Cargo securing with certificate, Loading area (L W H): 13,403 mm x 2,490 mm x 2,650 mmTyre size: 385/65 R22.5, Loading area volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , Leaf hydro-pneumatic, Rear underrun, Lift axle, Pallet box, Electronic Brake System EBS, Spare wheel carrier double, Ferry lashings, Bolted chassis, Temperature recorder, Double deck, 1x15 and 2x7 pin plug, Antispray, Customs sealing capability, Telematics system, EcoGeneration, Dynamic ramp protection (DRP), High-voltage battery pack for S.CUe, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Lodpsxntkisfx Ackoab

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Lodpfx Acjx A Hggskjab

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine. No. Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support Laodpehrkrwefx Acksb - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg good condition

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Ledpfxokpwuuj Ackeab Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine No. 29 Year of manufacture 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support table Required space (L x W x H) 500 x 450 x 440 mm Weight 45 kg good condition Lajdpfohrkrpjx Acksb

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Lsdpfxsy Tptae Acksab Piston rod extension: 70 mm - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance.

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Lasdpfx Ajy Rrftockob Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7992 TECHNICAL DATA - Loading fields: 2 - Manually adjustable side clamps: 2x6 pcs - Pneumatic vertical clamps: 2x6 pcs - Max length of glued elements: 3600mm - Max height of glued elements: 1500mm - Max thickness of glued elements: 130mm - Guides for gluing thin elements - Dimensions (L/W/H): 4300x1570x2110mm - Weight: 1400kg ADVANTAGES – Two working zones – Gluing length 3600mm – Pneumatic actuators – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, in very good condition Lajdsy Rq Uyjpfx Ackeb Net price: 14,900 PLN Net price: 3,550 EUR Net price calculated at 4.2 PLN/EUR exchange rate (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7993 TECHNICAL DATA - Loading fields: 2 - Side clamps, manually adjustable: 2x4 pcs - Vertical pneumatic clamps: 2x4 pcs - Max length of glued elements: 2500 mm - Max height of glued elements: 1330 mm - Max thickness of glued elements: 110 mm - Guides for gluing thin elements - Dimensions (L/W/H): 3000x1350x2000 mm - Weight: 900 kg ADVANTAGES – Two working zones – Gluing length of 2500 mm – Pneumatic cylinders Lasdoy Rq Imspfx Acksb – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, machine/vehicle number: 006064, Squaring: First and Second Pass Max Panel Thickness: 85 mm Max feed speed: 26 m/min Laedpfx Acslw A D Tsksb Distance between dogs: 1000 mm

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 4.16m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands 3420,- € (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 shelf stands, double-sided, approx. 4.16 m high, hot-dip galvanized IPE 160/100 each with 2x3 adjustable. Arms 1.20 m, 750kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 4160mm high, hot-dip galvanized Lsdpfjfivhfsx Ackeab Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load center of 600 mm 750kg per arm / 2250kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2020, condition: new, Cantilever rack, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! Lasdpfxofivhgj Ackeb 1 shelf unit with 4 stands € 3.210,- (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 shelf stands, double-sided, approx. 3.50 m high, hot-dip galvanized IPE 160/100 each with 2x3 adjustable. Arms 1.20 m, 750kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 3500mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with load center of 600 mm 750 kg per arm / 2250 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: used, Year of construction: 1971, pressure 100 t distance between columns 400 mm stroke 20 - 140 mm table surface area 900 x 710 mm ram surface 560 x 450 mm ram adjustment 80 mm dayligth 470 mm no. of strokes 70 Hub/min total power requirement 10,5 kW weight of the machine ca. 9 t dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m Lodpfx Acjxuv Htekeab

Year of construction: 2026, condition: new, Ready-to-deliver press feeding line for scaffolding plank production with 4 Ton decoiler, straightener feeder and 200 Ton C-type press. Bosporas Machinery is a manufacturer of coil processing, press feeding and roll forming systems, delivering high-performance and customized industrial solutions worldwide with strong R&D capabilities. This scaffolding plank feeding line is available from stock and ready for fast delivery. The system is designed for perforating, punching and feeding operations in scaffolding plank production and similar metal forming applications. The line combines stable coil feeding, precise straightening and high-capacity press performance in a compact and efficient production solution. Ideal for companies looking for immediate production capacity without long manufacturing lead times. ⚡ FAST DELIVERY ADVANTAGE Stock machine – ready for shipment Fast delivery opportunity Reduced investment waiting time Ready for industrial production setup ⚙️ TECHNICAL CONFIGURATION Coil Width: up to 600 mm Mechanical Decoiler: 4 Ton Capacity Straightening Servo Feeder System C-Type Mechanical Press: 200 Ton Capacity Servo synchronized feeding operation Heavy-duty industrial structure 🔧 LINE COMPONENTS Ledpey Nnftsfx Ackoab 4 Ton Hydraulic Decoiler Straightening Unit Servo Feeder System 200 Ton C-Type Press Electrical & Automation System Operator Control Panel ⚙️ ENGINEERING FEATURES High precision feeding performance Stable straightening and synchronized press operation Heavy-duty press structure for continuous production Servo motor controlled feeding system Compact and operator-friendly design Suitable for integration with roll forming systems ⚡ OPERATIONAL ADVANTAGES Immediate availability from stock Reliable and continuous production Reduced setup and commissioning time Flexible use for punching and perforation applications Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Scaffolding plank production Perforated metal production Sheet metal punching applications Roll forming pre-feeding systems Construction industry components

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Lasdpfxoy Ti E Nj Acksb Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set