Used Wechselpritsche Mit Steckrungen for sale (7,077)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Nledpjykud Rjfx Aiqod 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Nlsdpfx Aoykuhcoiqjd Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2021, operating hours: 10 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. MYTHO EASY Low Very low height machine Winding height 2400 mm Turntable 1650 mm LP Flat turntable 30mm flat - 500mm long Max. Load weight: 1200 KG PowerStretch 200%, changeable by gear wheels 150-200-250% Nsdpfxex Ta Nxj Aiqeld Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: Film clamp on turntable German. Schuko plug 6 programs individually storable Further demonstration units available immediately from stock. Prices ex stock Ludwigsburg

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) Nedpfoyktrtjx Aiqeld ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL Nlsdpfx Aisykub Ajqed All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 1992, condition: not inspected (used), Bagging machine and net clipper, double unit, manufacturer Strapack, for apples, potatoes, 1-5 kg capacity. The machine is in very good condition and was in operation for only about 10 years. The machine has 4 bagging stations, which allows for a throughput of approximately 15-20 2 kg bags per minute. The machine is complete with all accessories and ready for operation. The machine has been fully overhauled; price upon request. Nlodpfxshh Idrs Aiqsd I am also selling SPARE PARTS for EW20, EW10 and net clippers UC20. If interested, please contact:

Condition: used, 7 Collet sizes: Nledpfx Ajbn Rpieiqed 7-9-10-12-16-18-20 mm

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC machining center • Homag BOF 321, year 1998 designed for the production of stairs and other components. • Homag PC83 control system • Working area X = 5,200 mm • Working area Y = 1,300 mm • Working area Z = 410 mm • Number of milling spindles: 2 • Milling spindle motors: 12 kW • Maximum speed: 24,000 rpm • Swivel arm: Yes • 4-axis machine • Tool clamping system: HSK-F63 • Two tool magazines: 12 tools each • Double working area • Number of operator consoles: 10 • Vacuum pump: 2 • Vacuum pump capacity: 100 m³/h • Safety device: safety mat • CE marking: Yes Nedpfsx S Ewrjx Aiqeld

Condition: used, Year of construction: 1995, functionality: fully functional, controller model: DNC 80, degree of automation: manual, Jonescheit Hytap 30 with DNC 80 – robust press brake featuring proven control system For sale is a Jonescheit Hytap 30 equipped with DNC 80 control. This is a robust and reliable press brake suitable for use in both workshop and production environments. The machine is designed for precise bending operations and stands out due to its solid construction and user-friendly operation via the DNC-80 control unit. It is an attractive solution for companies seeking a fully functional and immediately available press brake. Specifications: Manufacturer / Model: Jonescheit Hytap 30 Control: DNC 80 Year of manufacture: 1995 Type: manual Condition: used, fully functional Notes: The machine is sold without tooling. Inspection and test run on site are possible. Nlsdpfxjyxakyo Aiqjd Condition: Used and ready for operation. Conclusion: A solid press brake for operators seeking a field-proven machine with DNC control. Ideal for on-site inspection and functional testing.

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Nledpfsyym Sajx Aiqed

Condition: new, Year of construction: 2025, This model SGR-1400 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. Nljdpfjc I T Txex Aiqsd In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: - Max. Working width; 1400 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 285 kg Price: 5.700 Euro

Condition: new, Year of construction: 2025, Multi-use, powerful, heavy and very massive segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding bench is characterized by the full segmentation over the entire working length of 1.40M. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle is from 0 to 155 degrees. Lock with the pedal, the hands are free and you can easily position the sheet metal - open and close with your foot. The folding beam is connected to 2 gas pressure dampers, so the control with the folding beam is incredibly easy. Practical tool box on segments at the rear of the machine. Technical specifications: - Max. Working width; 1400mm - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - weight 300 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5700 euros wheels incl. We are looking forward to your contact! Nedpfoc Swhyjx Aiqold

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Nsdpfx Aeyq Rdyeiqeld Please arrange appointments or submit offers via email, not by phone.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. Nedpfx Aswcgr Ejiqeld New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: excellent (used), Interroll roller conveyor 0.99m with drive Nedpfehvmi Tex Aiqeld The Interroll roller conveyor element is in a very good condition. Furthermore, the roller conveyor has its own drive motor. Width: 400mm Length: 990mm Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, mileage: 1,21,850 km, power: 353 kW (479.95 HP), first registration: 09/2023, fuel type: diesel, overall weight: 18,000 kg, tire size: 315/80 R22,5, axle configuration: 4x2, wheelbase: 3,900 mm, next inspection (TÜV): 09/2026, color: white, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, traction control, Permissible total weight: 18,000 kg, tire size: 315/80 R22.5, 1st axle: , 2nd axle: , leaf-spring air suspension, tilting hydraulics: single-circuit, retarder, tachograph, fifth-wheel coupling, electronic braking system EBS, electronic stability program ESP, anti-slip regulation ASR, adaptive cruise control ACC, driver's seat with air suspension, driver's armrest, MAN Media Truck Advanced, aluminum wheels, electric windows, outside temperature display, fog lights, electric exterior mirrors, curb mirrors, wide-angle mirrors, tinted windows, sun visor, cooler box, rotating beacon, hill start assist, LED daytime running lights, cup holder, cornering light, rubber floor covering, speed limiter, storage compartment, errors and changes excepted. The offered vehicle does not have ADR certification. New tilting hydraulics, manufacturer's warranty until 09/2028. Nlodpfjzphmuex Aiqod

Condition: used, mileage: 32,164 km, power: 368 kW (500.34 HP), first registration: 03/2025, fuel type: diesel, empty load weight: 16,535 kg, maximum load weight: 9,465 kg, overall weight: 26,000 kg, tire condition: 80 %, axle configuration: 3 axles, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, crane, cruise control, differential lock, onboard computer, parking heater, truck registration, | VOLVO FH500 6x4 3-sided HAMA tipper | Palfinger PK22002 EH radio remote control (piano remote control) | loading area container width without rear corner posts, | leaf/air suspension | EURO6, I-Shift, retarder | automatic, multifunction steering wheel | air conditioning, heated seats, navigation system, refrigerator, | lane departure warning system, emergency brake assistant, | partial leather equipment, auxiliary heating, | trailer hitch | differential lock, | body length approx. 5m | Subject to errors, input and prior sale. Nljdpfxozpyags Aiqed

Condition: used, mileage: 7,17,393 km, power: 206 kW (280.08 HP), first registration: 06/2007, fuel type: diesel, empty load weight: 9,270 kg, maximum load weight: 7,750 kg, overall weight: 18,000 kg, tire size: 295/80 R22,5, axle configuration: 2 axles, wheelbase: 5,600 mm, brakes: engine braking, driver cabin: day cab, emission class: euro4, suspension: steel-air, number of seats: 2, total length: 2,600 mm, total width: 4,000 mm, total height: 9,900 mm, loading space length: 7,300 mm, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, truck registration, Volvo FL 280 refrigerated box truck | EURO 4 | Thermo King refrigeration unit | Suitable for deep freeze and fresh goods | Drive and stationary cooling with electric power | Partition wall | Dhollandia tail lift 2000 kg fold-under | Multifunction steering wheel, cruise control | Loading dimensions: L 7.3 m, W 2.48 m, H 2.4 m | Tires: 285/80 R22.5 | Errors and prior sale excepted. Njdpfx Aiozpyatsqsld

Condition: used, mileage: 6,86,360 km, power: 213 kW (289.60 HP), first registration: 02/2010, fuel type: diesel, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, central locking, cruise control, onboard computer, Krone superstructure, length 7.3 m, width 2.45 m, interior height 2.4 m. Man TGM 18.290, tare weight 7490 kg, payload 10435 kg, wheelbase 6175 mm. Nodpfx Aszpvpwsiqeld

Condition: used, functionality: fully functional, power: 48 kW (65.26 HP), fuel type: diesel, empty load weight: 7,475 kg, Year of construction: 2010, operating hours: 8,809 h, drive type: Diesel, Mini excavator Technical condition: good Description: Excavator - tracked excavator - mini excavator TAKEUCHI TB 175 - - Year of manufacture 2010 - - 8809 operating hours - - hydraulic quick coupler - - -MARTIN-POWERTILT - - AIR CONDITIONING - - 2 pcs. digging buckets 40 + 60 cm - - 1 pc. ditching bucket 150 cm - - - 4-cylinder YANMAR diesel engine 48.2 kW - - - rubber tracks approx. 50% - - DIESEL FUELING PUMP - - 3rd + 4th control circuit - - 12-volt system - - - good original condition Nlsdpfxezm Du Nj Aiqsd Quick coupler, buckets, 3rd valve, 4th valve, rear work light, front work light, heater, fully enclosed cab, air conditioning

Condition: new, Year of construction: 2026, functionality: fully functional, Tank container: 20-foot steel box container with an integrated 25,700-liter polyethylene tank (wall thickness 1 cm). Only for non-hazardous products (water, oils, alcohol, etc.), not for ADR materials. Temperature range up to -40 degrees Celsius. 1. Condition: new, unused, with valid CSC plate 2. Volume: 25,700 liters Nlsdezpx Ntopfx Aiqod 3. Decompression valve 4. Working pressure: 7 bar 5. Spare parts included: decompression valve, outlet valve, manhole cover 6. Desired color included (upon pre-order) 7. Company logo included (upon pre-order) 8. Tank removable 9. Transport: Free and non-binding offer for delivery (including unloading, if desired) – simply provide the postal code. 10. Original images 11. Available upon pre-order We look forward to hearing from you! NAUTEXA GmbH

Condition: used, mileage: 5,59,196 km, power: 180 kW (244.73 HP), first registration: 01/2015, fuel type: diesel, empty load weight: 7,000 kg, maximum load weight: 8,925 kg, overall weight: 16,000 kg, tire size: 285/70 R19,5, axle configuration: 2 axles, wheelbase: 4,800 mm, next inspection (TÜV): 01/2026, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 2,550 mm, total width: 3,750 mm, total height: 9,350 mm, loading space length: 7,400 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, DAF LF 250 flatbed with curtain side | Euro6, manual transmission | Tail lift 1500 kg | Cargo area dimensions: L:7.40m W:2.50m H:2.60m | Air conditioning, electric windows, electric mirrors | Toolbox | Subject to errors, input mistakes, and prior sale. Nedpfx Aieznb T Sjqjld

Condition: used, mileage: 6,95,423 km, power: 184 kW (250.17 HP), first registration: 08/2007, fuel type: diesel, empty load weight: 7,180 kg, maximum load weight: 7,745 kg, overall weight: 15,000 kg, tire size: 285/70 R19,5, axle configuration: 2 axles, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, Equipment: ABS, central locking, cruise control, differential lock, truck registration, | DAF LF 55.250 Flatbed | Palfinger PBS-1500 Tailgate Lift, 1500 kg capacity | EURO 4 | Sliding roof | Electric windows, electric mirrors | Manual transmission | Cruise control | Engine exhaust brake | Tool box | Errors and prior sale excepted. Nljdezm I N Depfx Aiqsd

Condition: used, mileage: 6,38,926 km, power: 375 kW (509.86 HP), first registration: 05/2016, fuel type: diesel, empty load weight: 14,790 kg, maximum load weight: 11,135 kg, overall weight: 26,000 kg, axle configuration: 3 axles, wheelbase: 4,300 mm, brakes: retarder, gearing type: mechanical, emission class: euro6, suspension: steel-air, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, truck registration, | DAF XF 510 Timber Transport 6x4 | Crane Penz 12Z9.50, Year: 2018 | Load capacity: 4m: 2,670 kg, 6m: 1,550 kg, 8m: 1,370 kg, 9m: 1,180 kg | Short log body with 2 pairs of stakes | Lane change warning system, distance control cruise control | Engine brake and retarder, driver's seat with air suspension | Electric windows, EURO6, automatic transmission | Seat heating, auxiliary heater, air conditioning, auxiliary air conditioning, radio/CD | Differential lock, toolbox | Fog lights | ABS, ESP, payload = 11,035 kg | Tires: Front axle: 385/65R22.5, Rear: 315/80 R22.5 | Loading length approx. 6.00m | Wheelbase 4300mm/1400mm | Sale only to commercial businesses! | Subject to errors and prior sale. Nodpfjzmxp Iex Aiqjld

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 5,739 h, load capacity: 4,000 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,450 mm, power: 75 kW (101.97 HP), empty load weight: 9,445 kg, total length: 5,500 mm, drive type: Diesel, construction width: 2,350 mm, Rigid telescopic handler Nedpfx Aiezmbzteqold Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Pneumatic Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres condition: 80 - 100% Description: Telehandler JLG 4009PS --- TURBO --- Year of manufacture 2011 --- 5,739 operating hours according to the display --- 4 tonne maximum lifting capacity --- Lifting height up to 9 m --- Levelling --- JOYSTICK CONTROL --- Mechanical QUICK COUPLER --- All-wheel steering, front-wheel steering, and crab steering --- 4-speed powershift transmission --- 4-cylinder PERKINS turbo diesel engine, 100 hp --- ALL-WHEEL DRIVE --- 9.4 tonne own weight --- 2.35 m wide --- 5.5 m long --- 2.45 m high --- Includes used pallet forks with SIDESHIFT --- Very good tyres approx. 90% --- Good condition --- Telescopic handler with very robust construction --- NEW bucket available at extra cost Sideshift, Quick coupler, 3rd valve, Heater, Full cab, CE Certificate,