Used 600Mm Batter Applicator for sale (10,428)

Condition: used, Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material to rectangular glass panes within a production line for solar modules. The material forms a seal to a second glass pane, which is applied in a later process step. The panes are fed in, the material is applied, and the panes are removed on horizontally running belts/conveyors. The thermoplastic applicator is a highly advanced machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve a high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Maximum width of the applied sealant bead: 12.0 mm Required constant inlet pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Operating temperature of the sealant: 110°C to 130°C Ambient Conditions and Emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound pressure level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material-lid container D18 according to DIN 6644 – with foot (F1) and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and have a defined viscosity curve. Only use materials that have proven themselves in practice and have been approved by the manufacturers of these materials and by Bystronic for your intended use. For detailed product descriptions and information on the handling, storage, and disposal of the material used, please refer to the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions of portal robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the portal robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions of drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions of control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Kjdpjzdyh Hsfx Anujnc Weight: 450 kg The applicator was used with butyl material. Condition: used From a test laboratory, in new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), machine/vehicle number: 110283-110155, Year of construction: 2012, AUTOMATIC LINEAR HANDLE APPLICATOR MACHINE MANUFACTURER AND&OR MODEL 50SIA3000R&P2 SERIAL 110283-110155 YEAR 03/2012 CAPACITY 3000 Bph Included: * Bunker for handles & tranportation convejor * Handle side rejection system OMRON Knodpfx Ajquuv Ijnusc ALSO FOR SALE : TRINE T4400 Labelling machine €17,800 with HOT MELT glue. S/N: 032M44045 Labelling speeds: 60 to 350 cpm USED Wrap around labeller used for PET bottles. Used with 0.33 / 0.5L / 1.5L Volume

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Knedpfx Aozt Ip Rjnusc Identification No. 950672. Year of manufacture probably around 1995.

Condition: used, Year of construction: 2001, - RBO vacuum feeder – Tornado SC 1300 - HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) - HEESEMANN – Dust removal machine - Plus additional dust removal - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - HACKEMACK slit nozzle dryer - RBO – Vacuum stacker Oil application line Year of construction: 2001 Oil application line consisting of: RBO vacuum feeder – Tornado SC 1300 HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) HEESEMANN – Dust removal machine Plus additional dust removal BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above Knodpszuzg Eofx Anuec HACKEMACK slit nozzle dryer RBO – Vacuum stacker with new Siemens control system in 2024 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2006, machine/vehicle number: MPP Nr. 01 067, Machine: Flextrainer MPP Handle Applicator Kjdpfx Anoz Ri Unousnc

Condition: used, functionality: fully functional, Metering and application system Hydrotop 1 E400R + Ecotac_C for single-component (1K) PUR edge gluing Ksdpfx Ansul Shnousnc for package dovetail joint systems Glue application – dovetail joint Adhesive application – dovetail joint in very good condition functionality tested

Condition: good (used), Horizontal resaw, capacity 600mm wide x 150mm thick. In good working condition. Machine dismantled and loaded on truck. Can be seen running. Contact by telephone in French, or by email in your language. Ksdpoxb D D Hsfx Anuonc

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 907 h, load capacity: 1,600 kg, lifting height: 600 mm, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low-lift pallet truck Load center: 600 Condition: Refurbished, no warranty Technical condition: good Front tire type: Vulkollan Front tire condition: New Rear tire type: Vulkollan Rear tire condition: New Battery voltage: 24V Battery capacity: 230Ah Knsde Aat Amspfx Anujc Battery manufacturer: IBH Battery type: PzS Battery year of manufacture: 2020 Battery condition: 60 - 80% Description: Handover with new FEM 4.004 inspection including inspection certificate. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Feel free to browse our website at fleischmann-foerdertechnik. We will be happy to provide you with a quote for leasing and financing, as well as delivery at favorable conditions. A trade-in of Linde equipment is also possible – even if you do not purchase any equipment from us. The stated operating hours were recorded as of the date of listing. Subject to prior sale, changes and errors. Initial lift height.

Condition: used, Year of construction: 2009, Adhesive application machine Knjdpfjzuzvyex Anuec Manufacturer: Wirth Type: LW 120.5/1300 Year of manufacture: 2009 Technical data: - Roller width: 1300 mm - 2 rollers (application + metering) - 1 spare application roller Note: Cables cut. Special price: 1,000.00 EUR

Year of construction: 2022, condition: excellent (used), Weber Compact CC Labeller Applicator Complete with controller Year - November 2022 Knjdotq E Rkjpfx Anujc In excellent condition

Condition: used, all stainless steel belt width 600 mm mobile mesh width 5 mm adjustable speed with air knives Knodpfx Asz Ahd Henusc with batter pump

Condition: used, Year of construction: 2002, Overview This Twin Pack handle applicator, built in 2002, applies carry handles to PET bottle multipacks. It comes from a mineral water packaging line of the same year with an output of 20,000 - 30,000 bottles per hour depending on format. The machine is still installed and under power and can be inspected on site. Technical data - Manufacturer: Twin Pack - Year of manufacture: 2002 - Machine type: handle applicator for beverage multipacks - Line output: 20,000 - 30,000 bottles/h depending on format - Line formats: PET bottles 0.25 l, 0.33 l, 0.5 l, 0.75 l, 1.0 l and 1.5 l - Control: Siemens text operator panel Equipment - Handle application unit with tape reels on a blue steel frame above the pack conveyor - Control panel with separate start, stop and reset for the front and rear sections, emergency stop - Guarded enclosure with transparent doors Condition Knodpfez Elmhex Anuoc Still installed and under power. An inspection on site is possible. Availability Available from 31 October 2026. Location: Germany.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Knedpfx Aozgckcenuoc Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 1990, Paint/coating application system Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Note: Kedpfx Aezuzqdonuenc The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Heraeus Noblelight F300SQ UV Curing System The F-series systems are robust systems with simple operation for demanding production and laboratory applications, and have proven themselves in practice over decades. The F300S irradiation system consists of an electrodeless 120 W/cm irradiation system and a matching power supply unit. This proven, economical, and modularly expandable 6-inch system allows you to fully utilize all the advantages of microwave-activated Heraeus Noblelight systems in your production process. The electrodeless irradiation bulb enables effortless switching of emission spectra in laboratory operation and represents the most reliable, stable, and efficient UV curing system on the market. F300S systems are the curing system of choice when minimal downtime, minimal maintenance, and maximum product performance are the most important performance parameters. Knjdpfsg H Sywjx Anuec The optional F300SQ system features a quick restart function (QRM). Advantages Simple installation Electrodeless technology More efficient and faster UV curing with high peak Simple, user-friendly control Lowest acquisition costs Robust and reliable Popular lamp spectra available Possibility of processing heat-sensitive substrates – less heat compared to mercury vapor lamps This compact system includes a 6-inch wide irradiator (lamp module), an electrodeless bulb, a power supply, and an integrated fan for cooling. Bulb length: 15 cm Power class – 120 W/cm (300 W/in) Irradiation width 150 mm Guaranteed irradiator lifespan of 6000 – 8000 operating hours No aging behavior due to reduction of emission and/or shift of the emitted spectrum High UV/low IR power. Optimized irradiator design for maximum UV power with minimal infrared. Less heat to the substrate. The power supply can be placed anywhere and connected to the irradiator module via easily installed cables. Focused elliptical reflector. Concentrates maximum UV energy on the substrate. Cooling air – integrated fan 2.7 m3 Reflector geometry: Hemispherical, focused at 53 mm (2.1 inches) from the irradiation surface Power setting – optional quick restart available Compatible with LC6B and DRS 10/12 belt conveyors Cooling: 2.7 m3 Supply via integrated fan Power supplies - P300MQ power supply Quick restart function: Maintains a low current consumption of the bulb in standby mode (up to 40 seconds) to enable a restart of the lamp at any time 24-second cooling phase On/off/standby control, safety interlocks, production line connections, production interlock, pull-out control board, complete error display, master/slave option, connectivity Power connection: 200–240 V, 18 Amps, 50/60 Hz, 1 phase Dimensions: External: WxDxH 1400 x 900 x 2200 mm Chamber: WxDxH 600 x 500 x 1100 mm Door opening: 780 x 520 mm Weight: 40.3 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Automatic labeler, label applicator Zebra 110PAX4 /ct1899 Kjdpfetrly Dex Anuonc Manufacturer: Zebra Type: 110PAX4 The product comes with full documentation and software.

Condition: used, all stainless steel belt width 400 mm mobile mesh width 5 mm Knodpfx Aoz I N Rpsnusc adjustable speed with air knives with batter pump outside dimensions (l x w x h) : ± 1.900 x 900 x 1.900 mm with electric heating element: 3 kW - 230/400 V

Condition: used, Year of construction: 2009, Overview  This handle applicator was manufactured in 2009 by Italy TWIN PACK. The machine is designed for handle application on PET bottle packs. Production was stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It has less than 500 operating hours and is available immediately. The reason for sale is a new project with installation of a complete new line. Technical data  - Capacity: 35 ppm - Formats: 1.5 L – 3×2 - Application: Handle application for PET bottle packs - Configuration: Not provided - Operating hours: Less than 500 hours Kedey Etdgepfx Anuenc

Condition: used, Year of construction: 2014, Overview The handle applicator was manufactured by the German company B&W Solutions GmbH in 2014 and until now it was part of a PET filling line for water.  Knedpfx Ajyb Sm Dsnujc Technical data  - Total output: 60 cycles/min - one lane - length 3660 mm | width 1790 mm | height 2500 mm - recommend specifications: - Adhesive Strips: Width: 25 mm, Thickness: 78 μm, Adhesion to PE: 30 N/cm², Elongation: max. 40% - Paper/Cardboard Strips: Thickness: 180–350 g/m², Width: 20–25 mm (±0.4 mm), Length: 150–240 mm (±0.4 mm)

Condition: excellent (used), Professional height gauge from the renowned Japanese manufacturer Mitutoyo. The device is designed for precise height measurement and scribing on surface plates. This model offers a measuring range up to 600 mm and is equipped with a dial indicator and fine micrometric adjustment, ensuring very precise dimensional control. The robust construction and high-quality workmanship characteristic of Mitutoyo guarantee repeatable and reliable measurements. — Technical data: • Manufacturer: Mitutoyo (Japan) • Measuring range: 600 mm • Mitutoyo dial indicator • Indicator scale division: 2.5 µm • Micrometric adjustment • Stable, heavy base • Clear measuring scale — Applications: • Measurement of component heights • Scribing on granite surface plates • Dimensional inspection • Workshops, tool rooms, quality control departments — Condition: Used, in good technical condition. Shows normal signs of use. Sold exactly as shown in the photos. — Scope of delivery: • Mitutoyo height gauge • Dial indicator Kedpfxjz Smxhs Anuenc • Micrometric adjustment mechanism

Condition: good (used), Year of construction: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821 press is used for gluing wooden elements, e.g. tabletops with maximum dimensions of 7800 mm x 2100 mm, the factor which accelerates gluing is warm water supplied to the press shelf and being in continuous circulation (it can be supplied from CO or heated by heaters mounted on the press) Heating power of the press 72kW Maximum capacity of the press up to 2000 m2 / 7.5h Kedpfxjrqzgks Anuenc Glue applicator with feeder for Kallesoe press Type KL40 - used to automatically apply glue to each lamella and transfer directly to the press LV7821

Condition: excellent (used), functionality: fully functional, Selling an original Homag Group glue application unit (upper part with glue application roller and drive coupling) for edge banding machines of the Brandt / Homag brand. The unit is in good, clean condition with normal signs of wear and tear (see article photos). It features the practical quick-change system, including the corresponding locking pins (ball handles) and the original Harting connector. Technical data & details: Manufacturer: Homag Group / Brandt Part number (engraved): 4-030-15-0531 (4030150531) Components: Knurled glue roller, metering slide for layer thickness adjustment, protective grille, high-temperature-resistant connecting cable with Harting connector, 2x locking pins. Kedpfx Ansy Uv Umoujnc Suitable for: Many models of the Brandt Optimat series (KDN / KDF / Ambition, etc. – please check the part number with your machine beforehand).

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Kjdsxy Tmuepfx Anujnc

Condition: used, Year of construction: 2001, Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  - Total output: 70 cycles/min - electrical connection: 400V/N/PE/50Hz, 3,6kW - Two lanes Knsdpey Sccfefx Anuoc Additional information - best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) - conveyor for packages available

Condition: good (used), - Capacity : max. 3000 bph - With cork presence control, at the inlet - Cork dust blow-off on the bottle - With capsule applicator - With shrink head Knsdpferalruex Anuoc - Running direction: left - right - Machine completely overhauled - Machine in very good condition