Used Baykal Aphs 31440 for sale (320)

Condition: good (used), Year of construction: 2007, Blade length: 200 mm For plate thickness: 6 mm Hydraulically driven Variable angle Machine weight: 1,200 kg Kjdjyuyaljpfx Afusdn

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Stands passage: 2.750 mm Max. pressure: 180 t Kjdpfxskh Niqe Afuedn Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand Kdodpjpxmxcjfx Afuon - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3219, Offer 24295 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - throat 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 16 pcs - Motorized back gauge with positioning control 20 - 1000 mm - Front angle fence + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 per/min Kedpsu Upafefx Afujdn - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space requirement incl. back gauge, without front support arms - approx. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - electric foot - switch - cutting line lighting - - cutting length preselection - Rear guard with light barrier

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm Ksdpsxab Ersfx Afujdn stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 2004, sheet thickness steel (max.): 4 mm, cutting length (max.): 200 mm, Type HKA 200 x 4 Capacity 200x200x4mm Kdedpov Efu Ssfx Afusn Variable angle adjustment Blades reground

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Kjdpfsya Hwzsx Afuodn

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like Baykal 320ton x 4metre Cnc Pressbrake For sale Make: Baykal Capacity: 4metre x 320ton Axis: R and X axis on the back gauge - 2 axis back gauge Year: 2022 Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Technical information: Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Bending length (over tooling) 4100mm Ksdpfevgc R Hex Afuedn Bending length (between frames) 3550mm automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Our horizontal form, fill and seal machine from the DEAPHS series is specially designed for filling sachets and doypacks sealed on 3 and 4 sides. Thanks to the various dosing systems, such as auger dosing, the volumetric cup filler and the multi-head filler, the machine reliably packs powdery, liquid and granular products. The machine also produces the bags to be filled independently from flat film, making it a cost-effective and efficient packaging solution. The modular design of the form, fill and seal machine means that it can be converted and extended quickly and easily. ✅ Perfectly suited for food, pet food, pharmaceutical products, cosmetics and other non-food products. ✅ Also ideal for filling small product quantities and samples - for example in our mini pouches. ✅ Optional accessories such as volumetric cup filling system, multi-head combination weigher, piston filling device and Hibar pump filler ✅ You can also obtain suitable packaging material (pouches & film) from us Independent film unwinding shaft: Ensures good control of film tension, flexible adjustment to film roll width and bag specification possible, better doypack forming. Configuration: -Film unwinding shaft Kdjdsum R Ezepfx Afujn -Bag bottom sealing -Bag bottom former -Three horizontal sealing units -Two vertical sealing units -Servo bag take-off -Mechanical bag cutting -Vacuum bag opening -Photocell control -LCD - Touch display -SPS - Panasonic -Servo-controlled film feed Machine dimensions: approx. 5,500mm x 1,100mm x 1,400mm (L x W x H) Net weight: approx. 2,000kg Connected load: 380V, 3-Ph, 50Hz, 6.5kW Air consumption: 0.23m³/min Main components: Mitsubishi, Panasonic, Autonics, ABB, Airtac, SMC

Condition: used, Year of construction: 2019, product width (max.): 530 mm, roll diameter: 1,000 mm, We offer this used OMET X6 530 flexographic printing press, year of construction 2019. Manufacturer: OMET S.r.l. Model: X6 530 Kodsyfh Aiepfx Afuodn Serial Number: 2188 Year of Construction: 2019 Machine Type: web press If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analytical); 0.000 to 3.000 ml/min (capillary) Flow rate accuracy: < 0.1% Kodpfx Afjzdtlfeuedn Flow rate precision: < 0.1% Gradient dosing accuracy and precision: ± 0.5% at 2 ml/min (analytical only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analytical); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus dual pump 6-port valve MXP9900-000 AFC-3000 automated fraction collector RFC-10 regulator Condition: used Scope of supply: (See pictures as shown) (Subject to change and errors in technical data and specifications!) We will gladly answer any further questions you may have by phone.

Condition: used, Manufacturer: Pfeiffer Vacuum Type: Diaphragm vacuum pump Model: MVP 015-4 DC Article number: PK T05 160 Pumping capacity: 0.75 m³/h Supply voltage: 24 V DC ±10 % Rated current: 3.3 A Maximum current: 6.8 A Maximum speed: 1800 min⁻¹ Kdjdpfx Aozdakijfuen Weight: 4.4 kg Year of manufacture: 2021 Serial number: 28748878 Condition: used Location: Kusel

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 133, product width (max.): 270 mm, working width: 270 mm, type of input current: three-phase, Equipment: documentation/manual, Semi-rotary flexographic printing machine, MALBATE Mecaformat 270. 5 printing units + 1 varnish unit + rotary magnetic die-cutting unit. UV drying - 6 drying units. Average power consumption: ~25 kW. Kodpsyr R Sgsfx Afuodn Compressed air: 7/8 bar. Maximum web width: 270 mm. Minimum web width: 150 mm. Maximum feed length: 220 mm. Minimum feed length: 50 mm. Maximum printing width: 260 mm. Maximum printing length: 305 mm. Maximum length of the semi-rotary cutting die: 220 mm. Maximum unwind roll diameter: 3000 m. Unwind roll diameter: 800 mm. Rewind waste roll diameter: 450 m. Rewind roll diameter on the automatic winder: 360 m. Maximum speed: 10,000 impressions/hour. The machine is in production. You can schedule an inspection. Details are available in the PDF file. Please contact us for further information.

Condition: used, Shimadzu gas chromatograph mass spectrometer and AOC-5000 autosampler, equipped with an Edwards dual-stage rotary vacuum pump. PC, monitor, keyboard, and mouse (it could not be confirmed whether the PC has suitable software and passwords). Kedpfx Aszfiqyefujdn

Year of construction: 2012, condition: excellent (used), functionality: fully functional, The technical condition is very good, and the device has been tested. This means that the devices are calibrated, perform 100% accurate measurements, and are regularly warmed up for at least 12 hours once a month. Kdsdpfezcmbljx Afuen It is possible to perform an on-site transformer oil test – of course, after initial verification to compare the results, as shown in the photos. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay! The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. A gas standard (a cylinder with calibration gas) ensures measurement consistency with concentration standards. Before performing a measurement, the device is always calibrated, and its functionality is checked. A special shaking syringe (included) ensures the correct volume ratio. An excellent solution for oil laboratories in power plants and research facilities serving the power industry. PPMReport software with a Polish language version is included. It has built-in diagnostic tools: Duval's triangle and Rogers' ratios. Used by power plants, system operators, and laboratories serving the power and industrial sectors. The field version is equipped with a special pressure vessel for helium carrier gas (purity 99.999%). It is supplied with shaking syringes for preparing the extraction gas cushion, syringes for calibration, and an air sample. TECHNICAL PARAMETERS Number of gas types: 9 (Hydrogen H2, Methane CH4, Ethane C2H6, Ethylene C2H4, Acetylene C2H2, Carbon monoxide CO, Carbon dioxide C02, Oxygen 02, Nitrogen N2) Measurement range for gas concentrations in oil: H2: 5-60,000 ppm, Other gases: 1-60,000 ppm, 02: 60 ppm - 100,000 ppm, N2: 500 ppm - 100,000 ppm : 1050 mm 3. TECHNICAL DESCRIPTION Gas chromatograph for testing insulating oils using the DGA (Dissolved Gas Analysis) method, for field and laboratory applications. The laboratory version includes a shaker. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay. The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. The condition is very good. We have two identical, fully functional units. If you purchase both, the price of one will be 50% lower. Before purchasing, I recommend inspecting and testing the equipment on-site (performing a test). The last test was performed on November 21, 2025, and compared with another MYRKOS device (the test was verified in a certified laboratory). Available for viewing in Rzeszów.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, NORDMECCANICA FLEXI 8 Central drum flexo printer 8 colors Printing width max. 1200 mm Material width max. 1260 mm Mechanical speed up to 300 m/min Kdjdpfxozdzg Ds Afuon Drying system by thermal oil Web guide Video control FIFE Rotating warehouse for cylinders storage 160 printing cylinders 18 anilox

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 400 h, product width (max.): 450 mm, working width: 450 mm, Material width 450 mm Print width 445 mm Jumbo rolls D 1000 mm Print length 228.6 mm to 609.6 mm 8 flexographic printing units 8 UV cassettes 2x hot air drying Printing speed max 150 m/min Feed printing unit +/- 4 mm Punching width 450 mm Punching length from 304.8 mm to 609.6 mm Rewind diameter D 800 mm Materials to be printed: Self-adhesive labels (paper, PET, BOPP, PVC) Paper from 30 to 200 gsm Film from 20my (BOPP), 35 my PVC/PET, shrink 12 my PET Cardboard up to 400 gsm Kdjdpfeqa Ax Njx Afujn Accessories: 16 impression cylinders 8 anilox cylinders 1 die-cutting cylinder 1 IEEC corona treatment (one-sided) 1 Meech web cleaning unit (double-sided) 2 punching units optional 1 turning cross 1 Delam/Relam 1 Coldfoil unwinder 8 LED cassette dryer GEW We would be happy to make you an offer.

Year of construction: 2023, condition: used, Best regards, Kdedpoyvgqwsfx Afuen including: automatic sample injector autosampler 7693A, 5977C GC/Insert Plus MSD Turbo EI/CI package, 8890 GC system mainframe MS Ready S/SL, AIS tower, serial no. CN23285160, membrane vacuum pump, manufacturer Pfeiffer, serial no. 109120905, vacuum pump Duo Line, manufacturer Pfeiffer, serial no. 22139727, gas lines / valves, serial no. MY2328V093 +++ Please note: This item is part of an online auction! +++

Year of construction: 2008, condition: good (used), 2008 Philips Mammo Diagnost (re-badged Siemens Mammomat 3000) Mammography system for screening and diagnostics.First installed 03 2008 Analog Mammography system calibrated for CR with an 18x24 bucky, Anode: Mo Filters: Mo/Rh Grid table: Philips 18x24cm ,Philips 24x30cm Face shield: Standard 16cm, Long 21cm Carbon fibre table /mag table: 1,5 18x24 Siemens Carbon fibre table/ mag table 1,8 18x24 Philips Spot kompression plate 1,8 Philips Spot kompression plate 1,5 Siemens compression plate 1,5 Siemens compression plate 1,8 Philips Kdodpfx Asdqil Aefuen Xbpcno7r Compression paddles: 18x24 cm high edge Philips Axillae paddle 21cm x 9cm , 28x27x9 cm Contact spot compression 8cm Magnification table x1.8 This system is in very good cosmetic and functional condition. It has been professionally deinstalled and is available for immediate sale. carbon fibre table mag table plate

Condition: good (used), Year of construction: 2022, functionality: fully functional, product width (max.): 1,300 mm, working width: 1,300 mm, number of drawers: 4, 2022 LISCHENG FLEXO 4 COLLORS, AKE BOSE INK SISTEM, WISIBLE IN PRODUCTION PRINTING ON PAPER Kedpfx Aey Rr R Ajfujdn

Condition: new, Year of construction: 2026, Pneumatic double diaphragm pump Cobra 40 -10 Its unique design allows low pulsation operation Uniform ink flow for perfect spray and highest surface quality Ideal for processing shear and moisture sensitive materials Minimal shear forces - ideal for processing e.g. UV varnishes Ideal for processing small quantities of material and for frequent colour changes Scope of delivery: Basic unit on stand, HD double hose 7,5m, upper container 5l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Technical data: Conversion ratio: 40:1 Volume flow per double stroke: 10 cm3 Kdsdpfx Afsbuqn Heuen Flow rate at 200 double strokes: 2 l/min max. Operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg At a special price - immediately available

Condition: used, approx. 15t available Kdodpfxsdc A Sie Afuen

Condition: good (used), IR thermography system, brand: Thermo Sensorik Model: Thermo Spector Year of manufacture: Kdodpfx Afezcmldjusn 12/09 Scope of delivery: 1x InSb 640 SM thermographic camera (serial number 0001983179, format 640x512 pixels) with power supply and temperature display 1x Light box with power distribution unit and vacuum distribution unit on a motorized table, height-adjustable stand with cable winch for the IR camera 1x Thermal test plate (temperature-controlled solar cells - contact unit) with vacuum suction, temperature control unit and electrical excitation (thermostat and vacuum pump not included) 1x Control system includes: - LED matrix control - power supply for 6 LEDs (Thermo Sensorik LED Control Unit, S/N 000207013) - Power supply (Thermo Sensorik Power Supply + Multi-I/O-Box, S/N 000196029) - Power source (Höcherl & Hackl NL Series Source & Sink Model NL20V20C20) - Hardware includes a PC-compatible computer with camera interface, MPS5 software and Lock_In Suite software - Monitor, keyboard, mouse, manual

Year of construction: 2021, condition: used, (1) Gas Chromatograph Mass Spectrometer Kedpfx Aezbaw Rsfusdn Technical Details: Shimadzu Gas Chromatograph Mass Spectrometer with AOC-20S autosampler and ASOC-20i autoinjector.

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Kdodpfeyalqyox Afuen Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.