Used Bielemeyer/Demag Deckenkran + Hubwerk for sale (665)

Condition: used, Year of construction: 2000, Clamping force: approx. 200 t Rcjdpfx Aezlg S Iendod Number of components: 2 Mold installation height: approx. 310 / 760 mm Opening stroke: approx. 300 / 575 mm Tie bar spacing: approx. 560 × 560 mm Horizontal screw diameter: approx. 50 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 2 Special equipment: Needle gate Hot runner zones: 16 Flow rate: approx. 190 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 196 A Current 2: 110 A Current 3: 86 A Current 4: 67 A Weight: approx. 9.7 t

Condition: used, Year of construction: 2001, Operating hours: 193589 Clamping force: approx. 250 t Number of components: 1 Tie bar distance: approx. 840 × 840 mm Horizontal screw diameter: approx. 45 mm Core pull: 2 Hot runner zones: 0 Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 139 A Current 2: 102 A Current 3: 37 A Rcedpfx Anozlg N Hedod Current 4: 67 A Weight: approx. 10.7 t

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg For sale is a used machine from a site closure. Rcedpfezqam Asx Andod Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Rsdpex Sqi Hsfx Andscd Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: ready for operation (used), Bridge Crane 5t, Demag Bridge Crane 5t, Crane 5t, Used Machine Manufacturer: Demag Overall dimensions: 10,700 x 3,000 mm Electrical data: 400 V; 50 Hz, total current = 18 Amps Rcodpjwd Hhcofx Andsd Hoisting unit: Demag P35 Load capacity: 5,000 kg / 5t Rope length / lifting height: 8 m - Wired remote control - Crane travel motor refurbished - Trolley motor refurbished

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), rotational speed (min.): 725 rpm, rotational speed (max.): 1,450 rpm, Demag motor KBA140 B8/4 Duty cycle: 40/40% Price upon request 3.1 / 6.2 kW 725 / 1450 rpm 15.2 A 400 V 50 Hz Long shaft version. Rsdpfjzqtg Nox Andscd Condition: New or fully overhauled.

Condition: reconditioned (used), functionality: fully functional, power: 13 kW (17.68 HP), rotational speed (max.): 955 rpm, KBA160 B-6 Condition: Fully overhauled / price on request Brake: Heavy conical ED: 40% 13 kW 36 A 955 rpm Long shaft version 380 / 50 Hz Rjdjzqtd Uspfx Andecd

Condition: good (used), Crane bottle, crane hook, load hook, single hook, lower bottle, lifting bottle -Manufacturer: Demag, crane hook lower block -Load capacity: 500 kg -Hook opening: 32 mm -Dimensions: see photos -Dimensions: 240/90/60 mm -Weight: 1.7 kg Rcedpszk D Uqefx Andod

Condition: excellent (used), Load measuring device, overload protection -Manufacturer: Demag, Load measuring device, overload protection, original packaging -Type: MGS 1.25/2.75 -Item No.: 49189444 -Individual components: see photos -Cardboard dimensions: 290/220/60 mm -Weight: 1.1 kg Rjdpfjzk Daajx Andscd

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Rodjxhfuaepfx Andscd Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: excellent (used), Crane control system, controller, safety control system, safety switch, safety sensor, overload release power sensor, gear limit switch -Manufacturer: DEMAG, Crane control gearbox limit switch set, original packaging -Type: DGS 3 -142 -Item No.: 875 200 44 Rcsdezkqizjpfx Andjd -Cardboard dimensions: 250/120/H115 mm -Weight: 1.0 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, Robot Demag W710 axis) (Wittmann) Number of axis: 3 Rsdpsxp Nu Tofx Andecd X- 600 mm Y- 800 mm Z- 1500 mm

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: Rcjdpfx Anjyg Eu Sjded 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: 308-71800, total height: 3,500 mm, total length: 3,500 mm, Used Demag KBK2 column crane for sale. Maximum load capacity: 1000 kg Electric hoist in good working condition Electric controls in good working condition Rcedpjzqc Ebjfx Andjd

Condition: good (used), Crane control system, controller, counter -Manufacturer: DEMAG, Crane control controller -Type: PRVZ2-A00 -Item No.: 52501784 -Voltage: 220 V -Dimensions: 110/60/H75 mm -Weight: 0.3 kg Rcjdpfxjzkhzuo Andod

Condition: used, mileage: 67,200 km, first registration: 06/2009, fuel type: diesel, tire size: 16.00 R 25, axle configuration: 6x6, fuel: diesel, Year of construction: 2009, Equipment: ABS, air conditioning, crane, = Additional Options and Accessories = - 6x6 - PTO = Further Information = Redpfxezqa Ugo Andecd Tire size: 16.00 R 25 Front axle: Steered; Tire tread depth left: 55%; Tire tread depth right: 55% Rear axle 1: Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 2: Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Unladen weight: 36,000 kg GVWR: 36,000 kg Lifting capacity: 50,000 kg Crane: Year of manufacture 2009 Damage: None

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, load capacity: 1,000 kg, lifting height: 5,000 mm, Electric chain hoist DEMAG DKUN10-1000 K V1 Load capacity 1000 kg, 2/1 Hook travel 5 m Year of manufacture 2006 Without control unit, otherwise complete Very good condition Various electric chain hoists in stock Rcedpfjv Uvn Iex Andod Good condition Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse

Condition: used, Year of construction: 2009, Due to a relocation of our production facilities abroad, we now have two injection molding machines of the EL Exis / Sumitomo Demag brand available. These are the EL Exis S 200 - 840 and 300 - 1450 models, manufactured in 2009, which we would like to offer you on a non-binding basis. Rcjdsznwahopfx Anded The machines have been operated in our facility on a two-shift system. Only clear, glass-like PP random copolymer was processed. In addition to the injection molding machines, the side-entry robots from Wittmann are also included in the scope of supply.

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Rsdpfx Anszh N Tyedscd delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 1994, Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, monorail trolley Rjdpfxoziyi Io Andecd -Manufacturer: Demag, Running gear, Chassis type RU 3 DK -Load capacity: 300 kg -Dimensions: see photos -Quantity: 1x chassis available -Dimensions: 170/148/H135 mm -Weight: 2.1 kg

Condition: good (used), Bridge crane, overhead crane, disc brake, crane brake, disc, drum and storm brakes, traveling crane brake, brake ring, conical brake disc -Manufacturer: Demag, Brake ring Conical brake disc -Type: 624 658 44 RIW Rcsdpfx Anezix Rdsdod -Dimensions: see photos -Dimensions: Ø 263 x 33 mm -Weight: 0.6 kg

Condition: excellent (used), Bridge crane, overhead crane, disc brake, crane brake, disc, drum and storm brakes, traveling crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring for conical brake disc, unused Rjdpfx Ajzix Hfjndjcd -Type: KB 160 RIW -Dimensions: see photos -Dimensions: Ø 278 x 35 mm -Weight: 1.0 kg

Condition: excellent (used), Bridge crane, overhead crane, disc brake, crane brake, disc, drum and storm brakes, traveling crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring for conical brake disc, unused -Type: 628 626 44 RIW -Dimensions: see photos Rodpjzixx Uefx Andecd -Dimensions: Ø 310 x 37 mm -Weight: 1.0 kg

Condition: used, New spare parts for DEMAG DKUN5 - DKUN 5 (KMK71) Spare parts for the repair of a DEMAG crane, chain hoist Suitable for DEMAG chain hoist DKUN5 Scope of delivery: 1x Shaft-coupling-KMK set 1x Stand set KMK / P = 12600633 1x Runner set KM71 B2 = 12845833 1x Fan set KM71 = 12882233 1x Driving dog KM71 = 12876033 1x Thrust ring set KM71 = 12885233 1x Bearing shield set KMP 71 BS = 12861433 1x Chain guide set LDKUN D5 = 83628033 1x Small parts set KMK 71 B2 = 12878533 Rjdpfxszinw Ts Andecd Weight 11.5 kg G

Condition: good (used), functionality: fully functional, power: 150.78 kW (205.00 HP), fuel type: diesel, fuel tank capacity: 300 l, overall weight: 53,523 kg, maximum load weight: 1,12,000 kg, Year of construction: 2006, machine/vehicle number: 506081, Equipment: cabin, crane, hydraulics, USED DEMAG CRANE FOR SALE DEMAG CRAWLER CRANE MODEL: A600 C YEAR OF MANUFACTURE: 2006 Good Working Condition Machine sold as its Condition For More details please Contact Vijay Rcodpfx Anoumqy Eeded JPN Industrial Trading Pte Ltd, 13A, Pandan Crescent, Singapore-128478