Used Biglia Different Toolholders for sale (4,356)

Condition: new, power: 103 kW (140.04 HP), fuel type: diesel, color: white, gearing type: automatic, number of seats: 9, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Fiat Ducato Opel Movano Multiple vehicles in stock - L3 H2 - Length: 5,998 mm - Manual transmission, automatic optional - System floor with 6 airline rails - 7 sleeper seats (swivel, adjustable backwards, with left and right armrests, magazine net, and Isofix), individually configurable or easily removable in the passenger compartment - ABS paneling in the passenger compartment (no sheet metal visible) - Blue/white ambient lighting in the passenger compartment Available with grey synthetic leather seats as shown in the second-to-last photo or with red fabric seats. Optional: Entry step, wheelchair ramp, or lift. Special equipment: Reinforced battery, heated rear window, full-size spare wheel (incl. spare wheel holder), co-driver’s seat height-adjustable, tinted glazing, Visibility-Plus Package Additional features: Passenger airbag, driver airbag, trailer stability program, traction control (ASR), electrically adjustable and heated exterior mirrors, extended exterior mirrors for 2,200 mm vehicle width, Black Box (Event Data Recorder, EDR), brake assist, roof antenna, Eco Package, electronic park assist, driver assistance system: adaptive load control (LAC), hill start assist, intelligent speed assistant, driver drowsiness warning, autonomous emergency braking, post-collision system, crosswind assist, lane keeping assist with traffic sign recognition, rollover protection, fixed windows 3rd row in cargo/passenger area, cruise control including speed limiter, 8-speed automatic transmission, cooled glove compartment, rear wing doors with glazing, infotainment system with 5" color display, DAB and Bluetooth interface, body type: high-roof panel van standard, fuel tank: 90 liters, black radiator grille, partition wall to cargo area, model update (2), engine: 2.2 L 103 kW turbo diesel Multijet, wheelbase: 4,035 mm, tire repair kit, tire pressure monitoring system, rear acoustic parking warning (external warning signal), low emission according to Euro 6e, halogen headlights, right-side sliding door with window, upholstery: fabric, driver’s seat with armrest and lumbar support, engine start/stop system, rear view camera, UConnect telematics box, GVWR 3.5 t Ibodpfx Ajz Dhipeiyob Net export possible. 2 x Fiat, 2 x Opel available immediately. Additional vehicles available at short notice as automatics and manuals. Also as Opel Movano (identical model), partly with different equipment packages. 1 x Tenorite Grey in stock. All vehicles also available as demonstrators starting from €29,990.00 net. Net export possible. We make worldwide shipments.

Condition: used, Year of construction: 2022, Suction nozzle diameter: 350 mm Ibjdpjz A D U Ejfx Aiyjb Volume flow: 6927 m³/h Volume flow monitoring: pressure difference indicator Negative pressure: 2543 Pa Filter area: m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: 65 dB Filter cleaning: pneumatic, jet cleaning Motor power: 11 kW Frequency inverter: yes Machine length: Machine width: Machine height: Weight:

Condition: used, Year of construction: 2011, Working width: 20–230 mm Working height: 8–120 mm Feed system Ijdpfszkklpox Aiysbb • Variable-frequency controlled feed drive: 5–30 m/min, continuously adjustable, with 7 kW (9.5 HP) brake motor. • Pneumatically controlled up/down infeed roller before the 1st bottom spindle. • Axial adjustment range of the feed rollers relative to the left spindle: 35 mm. • Extended pendulum axis opposite the left spindles to 150 mm. • Reduced roller spacing in the area of the right-hand spindles. Machine frame, tables and fences • 2 m long jointing table (including jointing fence). • Grooved guide for short or difficult-to-feed workpieces, coated with Marathon PowerCoating. Table tops are non-removable. o Minimum working width: 25 mm o Maximum stock removal at the 1st bottom spindle: 7 mm • Manual lubrication pump. • One driven, hardened outfeed table roller, 210 mm wide. • One driven, hardened machine table roller, 210 mm wide. Pressure elements and guides • Spring-loaded top pressure rollers. • Anti-kickback device before the top spindle for short workpieces. Machine operation • Memory function for storing profile setup data. • EasyCom for quick and easy setup of the moulder and planer. • Storage for up to 1,000 profile programs, including tool data. • Reduced setup times. • Convenient and safe operation. • Basic equipment prepared for CNC-controlled adjustment and positioning. • 2 CNC-controlled radial adjustment and positioning axes for tool spindles No. 4 and No. 5, in conjunction with the Memory function or EasyCom. • CNC-controlled feed height adjustment (up/down) in conjunction with the Memory function. • Mobil- tool spindle (1 axis): automatic adjustment of the left spindle to different workpiece widths. • Centralized lubrication points located at the front of the machine. • Electromagnetic locking of the safety hood. • One internal light inside the safety hood. Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, Metal 3D printer manufactured in 2018. This RENISHAW AM400 features a build area of 250 × 250 × 300 mm and utilizes a 400 W Ytterbium fibre laser for high-quality additive manufacturing. It supports various materials including AlSi10Mg and Inconel 718, making it versatile for different applications. If you are looking to get high-quality 3D printing capabilities, consider the RENISHAW AM400 machine we have for sale. Contact us for further details. Ibjdpsz Atnwsfx Aiyjb

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) Ibsdsz Ady Dspfx Aiysb - Additional clamps - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed - Safety hood with adjustable opening width for improved noise and dust protection The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Condition: excellent (used), Year of construction: 2020, Ref: 11145 . 2020 Horizon AFC-566 FKT Automated B2 size folding machine with up to 14 different folding patterns. Equipped with: Flat pile feeder Pro-Face touch screen control Computer assisted make-ready, including roller gap adjustment Isdpfez Akl Hsx Aiysbb Sound Hood Digital Counter LCV-54 shingle delivery. Folding configuration: 6 Buckle plates in first station Electronic knife fold 2 x side buckle plates under knife Specification: Sheet size, Max: 558 x 850 mm Min: 128 x 148 mm Pile height, Max: 740 mm Prod. speed, Max: 42,000 sheets/hr. (A4 parallel fold).

Condition: excellent (used), functionality: fully functional, Various as-new VDI40 tool holders with cylindrical receptacle, used tool holders in excellent tested condition, top quality, various manufacturers including e.g. ISCAR. Ibodpfeyuv Ulsx Aiysb Pos. 1) Order number: 401_404_E2 Available: 4 pcs Tool holder for cylindrical tools / boring bars / drills: Receptacle diameter: 32mm Price each: €45.00 Pos. 2) Order number: 405_E2_01 Available: 1 pc Tool holder for cylindrical tools / boring bars / drills: Receptacle diameter: 31mm Price each: €45.00 Pos. 3) Order number: 406_407_408_E2_03 Tool holder for cylindrical tools / boring bars / drills Available: 3 pcs Receptacle diameter: 25mm Price each: €45.00 Pos. 4) Order number: 409_E2_01 Tool holder for cylindrical tools / boring bars / drills Available: 1 pc Receptacle diameter: 20mm Price each: €45.00 Pos. 5) Order number: 410_411_E2_02 Tool holder for cylindrical tools / boring bars / drills Available: 1 pc Receptacle diameter: 8mm Price each: €45.00 Dimensions: D = 83 mm d-2 = 83/40 mm (45.52 mm) d-4 = xx (8,10,12,20,25,32,40 mm) internal diameter H = 32.5 mm L1 = 75 mm L2 = 22 mm l-4 = 53 mm Form E2 For drilling tools with cylindrical shank With internal as well as external coolant supply Surface hardened, black oxidized and ground

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 213, Atla Coop - Schuco CC120A Compact corner crimping machine. Various assembly steps can be efficiently implemented at just one workstation: punching the frame, milling the glue holes and injecting the glue into one or two-chamber profiles. The option to switch off the cutter and adhesive injection makes the machine universally applicable for different aluminium profiles, and manual controls for the cutter and pump facilitate handling. Equipped with Schuco knives, Schuco bracing clamp, triangular support benches, user manual. Isdpfx Aoxvnwtoiysbb

Condition: used, Year of construction: 2008, turning diameter / mm centre distance / mm swing diameter / mm Manufacturer: DMG GILDEMEISTER Model: CTX 510 eco Year of manufacture: 2008 Machine type: CNC lathe / turning center Control system: Siemens SINUMERIK 810D Powerline Max. spindle speed: 3,250 rpm Spindle speed range: approx. 500–3,250 rpm Spindle power: 33 kW at 40% duty cycle / 22 kW at 100% duty cycle Spindle torque: 630 Nm at 40% duty cycle / 420 Nm at 100% duty cycle Ibsdpfx Aiozu A Uksyob X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. turning diameter: 465 mm Max. swing / turning diameter: 680 mm Spindle bore / bar capacity: approx. 76–92 mm (depending on configuration) Front spindle diameter: 140 mm Turret: 12-station Driven tool speed: up to 4,000 rpm Driven tool power: approx. 8.4 kW Chuck: 250 mm or 315 mm Max. workpiece weight between centers: 350 kg Total power requirement: approx. 50 kVA Power supply: 400 V, 50/60 Hz Machine weight: 7,500 kg Incl. chip conveyor Note: All technical specifications are for guidance only and are subject to change. Actual machine data may vary due to different equipment variants and subsequent modifications. No warranty or guarantee is provided regarding the accuracy or completeness of the technical specifications. The specifications and actual condition of the offered machine are the sole determining factors.

Condition: excellent (used), Year of construction: 2014, The set on offer is a TREIF TWISTER AT Cube Cutter combined with a STORM engineering loading lift (Hebe- und Kippvorrichtung), forming a complete, automated dicing station. The set additionally includes knife blocks of 6, 8, and 30 mm, allowing different grades of the finished product to be produced without needing to purchase extra tooling. How does the TREIF TWISTER AT with the STORM lift work? Raw material is placed in a transport container, which is raised and tilted by the STORM lift, emptying its contents directly into the loading chamber of the TWISTER AT cutter. Inside the machine, raw material passes through the cutting assembly, where interchangeable knives (a quick tool-change system requiring no additional instruments) cut it into cubes, strips, or slices, depending on the tooling used and the selected cutting program. Control is handled via a touchscreen panel with stored cutting programs, allowing quick switching between settings when changing products or knife spacing. Key advantages of the TREIF TWISTER AT with STORM set The STORM loading lift eliminates manual lifting and emptying of raw material containers, reducing operator physical strain and speeding up the feeding of successive batches into the cutter. Its IP65 protection rating allows the lift to operate under conditions of frequent station washdown. Isdpfx Aiezzp S Njysbb The included set of additional knife blocks (6, 8, and 30 mm) extends the machine’s capabilities to further cube sizes without needing to purchase separate tooling, which matters for plants with frequently changing product ranges. The solid construction of the TWISTER AT cutter, weighing 950 kg, and its power supply suited to a wide voltage range (380–480 V) ensure stable operation across different electrical installations. Technical specifications of the TREIF TWISTER AT with STORM set TREIF TWISTER AT Cube Cutter Manufacturer: TREIF Model: TWISTER AT Description: Cube cutter Year of manufacture: 2014 Capacity: up to 3,5t/h Chamber: 120 x 120 x 550 mm Current type: 3-PE, 50/60 Hz Operating voltage: 380–480 V Control voltage: 24 V Rated current: 15–12 A Supply line fuse: 25 A Rated power: 7 kW / 9.52 hp Weight: 950 kg Included additional knives: 6 mm, 8 mm, 30 mm STORM loading lift (Hebe- und Kippvorrichtung) Manufacturer: STORM engineering Year of manufacture: 2020 Power: 0.8 kW Power supply: 400 V, 50 Hz Protection rating: IP65 Weight: 410 kg Compliance: CE, ISO 9001-2015, Made in EU Application of the TREIF TWISTER AT with STORM set The set is used in meat processing plants, vegetable product manufacturers, and cheese processing facilities, wherever precise cube cutting of raw material is required alongside improved logistics for feeding raw material into the machine. The ability to quickly change knife spacing makes the set well suited to plants with a varied range of products.

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Isdpfxsyluicj Aiyjbb Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Metal Technika OWD 1600 Optimizer - manufactured in Poland - year of production 2017 TECHNICAL PARAMETERS: - cutting width 250 mm - cutting height 120 mm - Capacity from 3 200 to 8 150 mb /8 h - sorting table with 5 knockouts - Electronics Controller with color touch screen display "MITSHUBISHI" - Features - full optimization of 30 dimensions in two quality classes, - creation of cutting programs for different customers, - cutting at the point of marking with fluorescent crayon, - margin cutting (beginning and end of the input material) - cutting in packages (several elements at once) - meters, total, shift, operator, monthly counters, - cutting accuracy ±0.2 mm - Motor 5.5 KW (saw Ø500 - 140z) Isdpfxjrx Rxps Aiyjbb - Width of input mat 12 - 250 mm max. width / height ( 250 / 50 mm) - Height of input mat 12 - 120 mm max. h/w ( 120 / 130 mm) - Input mat length up to 4,200 mm - Lubrication Oil central lubrication system - Automation at the output Connection for slant conveyor and sorting table

Condition: excellent (used), PJ.187.100 Termotek Chiller Unit cpl. for Suprasetter A52/74/75/105 second-hand, tested PU.550.1000 Chiller Unit Cpl. incl. PCB ACTB-A-LMT (A105/106) second-hand, tested PJ.187.100F Chiller Unit Cpl. incl. PCB ACTB-A-LMT (A52/A74/A75) second-hand, tested and it's spare parts as well. Ibodpfx Asgzbwmeiysb All offers are subject to prior sale

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Mobile dust extraction unit AL-KO Mobil-Power-Jet 100 for use with woodworking machines. Ibedpfxszzadco Aiysb This compact dust extraction system is designed to be mobile and is suitable for extracting wood dust and chips directly at the machine. The rollers allow the unit to be used flexibly in different work areas. Technical data / Features Manufacturer: AL-KO Type: Mobil-Power-Jet 100 Year of manufacture: 2009 Manufacturer’s serial number: 2433338514 Item number: 195 426 Nominal volume flow: 700 m³/h Minimum volume flow: 565 m³/h Suction nozzle: Ø 100 mm Motor power: 0.75 kW Voltage: 230 V / 50 Hz Nominal speed: 2,850 rpm Nominal current: 4.85 A Protection class: IP54 Negative pressure: approx. 1,020 Pa Dust class: M Mobile / can be moved on rollers The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transportation is possible for an extra charge! Technical data and features may vary. Errors, prior sale and changes are subject to confirmation. All information is provided without guarantee.

Year of construction: 2001, operating hours: 26,266 h, condition: used, Colour: Grey Empty weight: 7.000 kg Dimensions (LxBxH): 350 x 220 x 240 cm Price: On request Milling machine, VMC Model: CNC Manufacturer: DMG / Deckel MAHO Type: DMU60T Year of manufacturing: 2001 Control: Heidenhain Working-hours: 26266 Travel: 630x560x560mm Spindle-speed: 10.000 rpm Table-dimensions: 1000x600mm Spindle-take: ISO40 Max. Workpiece-weight: 400kg Incl. Filter Interlit SK200-760 Incl. Automatic toolholder Incl. Documents Incl. Video available Machine-weight: 6700kg Machine-dimensions: 3500x2400x2200mm - Year: 2001 - Documentation available: Yes - CE marking present: Yes Isdsywt Nyspfx Aiyebb - CE certificate present: No - Operating hours: 26266 - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 3 - X-axis travel [mm]: 630 - Y-axis travel [mm]: 560 - Z-axis travel [mm]: 560 - Table length [mm]: 1000 - Table width [mm]: 600 - Tool holder: SK40 - Max. spindle speed [rpm]: 10000 - Options: Tool magazine, External cooling - Transport dimensions: 3500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The difference. KEY TECHNICAL DATA Machine year of manufacture: 2012 Capacities / Travel: Longitudinal (X): mm 8,000 Vertical (Y): mm 2,600 Lateral (Z): mm 1,500 Table size: Length: mm 10,000 Width: mm 2,500 Distance between grooves: mm 250 Paint finish: RAL 5011 (steel blue) RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Drive power: 100% ED 32 kW Spindle speed: min-1 20-4,000 Torque: Nm 900 Max. rapid traverse speed: X, Y and Z axes mm/min 25,000 Ibjdpfxszz H Ems Aiyjb Weight: kg approx. 34,200 Heidenhain iTNC530 Automatic milling head, diagonal, stepless Tool changer (60 magazine slots) Chip conveyor Coolant system 20 bar & internal coolant Preparation for NC rotary table RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are sourced by us after a rigorous selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: excellent (used), tool taper / shaft cross cut / tool taper / Manufacturer: EPPINGER GmbH Model series: PRECI-FLEX® EPPINGER PRECI-FLEX R78691B DRIVEN TOOL Serial number: 34143-6 Reference number: R78691B Transmission ratio: i = 1:1 Maximum speed: n_max = 5000 rpm L1 dimension: 99.99 mm Ibedpfx Aoy S Dqkoiyjb Condition: Very good

Condition: excellent (used), tool taper / shaft cross cut / tool taper / Manufacturer: EPPINGER GmbH Model series: PRECI-FLEX® EPPINGER PRECI-FLEX R78684B DRIVEN TOOL Serial number: 61668-6 Reference number: R78684B Transmission ratio: i = 1:1 Maximum speed: n_max = 6000 rpm L1 dimension: 70,01 mm Ibsdpfx Aioy S Dqwoyeb Condition: Very good

Condition: excellent (used), tool taper / shaft cross cut / tool taper / Ibsdpfxoy S Dqqo Aiyjb Manufacturer: EPPINGER GmbH Model series: PRECI-FLEX® EPPINGER PRECI-FLEX R78684B DRIVEN TOOL Serial number: 42034-2 Reference number: R78684B Transmission ratio: i = 1:1 Maximum speed: n_max = 6000 rpm L1 dimension: 70 mm Condition: Very good

Condition: excellent (used), tool taper / shaft cross cut / tool taper / Manufacturer: EPPINGER GmbH Ibedpfx Aoy S Dvaeiysb Model series: PRECI-FLEX® EPPINGER PRECI-FLEX R78684B DRIVEN TOOL Serial number: 74028-10 Reference number: R78684B Transmission ratio: i = 1:1 Maximum speed: n_max = 6000 rpm L1 dimension: 70,00 mm Condition: Very good

Condition: used, This listing is for a second-hand Konica Minolta accessory: the ‘Konica Minolta LS-507 Stacker’ Compatible with various Konica Minolta AccurioPress models (code WY1) Condition: This is a second-hand item, which may show signs of use (minor scratches or discolouration). Iodpfx Aiey R Ntbeyjbb The device has been tested for functionality Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), tool taper / shaft cross cut / Isdpfjy S Eaysx Aiysbb tool taper / Manufacturer: EPPINGER GmbH Model series: PRECI-FLEX® EPPINGER PRECI-FLEX R78691B DRIVEN TOOL Serial number: 34143-5 Reference number: R78691B Transmission ratio: i = 1:1 Maximum speed: n_max = 5000 rpm L1 dimension: 99.99 mm Condition: Very good

Condition: excellent (used), Year of construction: 1988, Force: 125 tons Iedpedvb Tfofx Aiyjbb Windows: yes Daylight: 380mm Table: 1100x700mm Ram: 700x350mm Stroke: 01-120mm Strokes per Minute: Approx. 70 Requested power: 22kW Weight: 8500kg Height: 2900mm

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Ijdpfsy Szbyex Aiyebb

Condition: good (used), Welded frame, used Manufacturer: CREA-SWISS Technical Data Brand: CREA-SWISS Max. frame size: 3,000 x 2,400 mm Min. frame size: 470 x 610 mm Profile height: up to 115 mm Height tolerance compensation: from -1 mm to +1 mm Dimensions: L 3.6 x W 1.5 x H 2.0 m Weight: 280 kg Advantages - Single-operator device: set external dimensions, insert profiles, adjust height differences, and weld completely on both sides, all by one person - Precise adjustment for accurate frame construction - Rotatable around the longitudinal axis - Fully welded in a single clamping - Fine adjustment of miter edges - Mobile workstation on castors - Suitable for all types of frames (steel windows, fire doors, or angle steel frames) Iodsy At A Depfx Aiysbb All information provided without guarantee. A demonstration is possible at any time in our showroom.