Used Bizmak - Tuerkei Embossing-Calender for sale (200)

Condition: used, machine/vehicle number: Maschinen-Nr.: 89/8085, Rollprägemaschinen werden zum Prägen von massiven oder hohlen Rundteilen eingesetzt. Technische Daten: Hersteller: Borries Markier-Systeme Type: MB76EL Maschinen-Nr.: 89/8085 Prägehub: ca. 220mm Aufspannfläche: 220 x 220mm Pgedelbgu Ijpfx Airou Antriebsleistung: 1,1kW Eigenschaften: - Mit geringem Kraftaufwand sind dauerhaft hohe Prägeleistungen erzielbar - Prägelänge und Prägetiefe einfach einstellbar - hoher Werkstückdurchlass - Anpassung an den Werkstückdurchmesser und die Einstellung der Prägetiefe ist durch die Höhenverstellung des Maschinentisches leicht möglich

Condition: used, Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Pgsdsvi Hh Ispfx Airju Online-Video-Inspection...

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Pedpfx Aieh Uhqysrsgu Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: new, Year of construction: 2009, operating hours: 69 h, functionality: fully functional, Mediseal / Körber P-1500 Cartoning Machine for Vials and Eye Drop Bottles – Year of Manufacture: 2009 For sale: a high-quality, intermittently operating, horizontal cartoning machine of the type Mediseal (Klöckner) P-1500, designed for pharmaceutical applications. The machine is suitable for both vials and eye drop bottles as well as comparable primary packaging formats. The system was purchased as new but has never been used in production. Only FAT (Factory Acceptance Test) and SAT (Site Acceptance Test) were performed. With just 69 operating hours, the machine is in virtually as-new condition. Technical Description • Max. output: up to 150 cartons per minute • Operating mode: intermittent, horizontal • Product infeed via magazine, starwheel, and product chain • Automatic erecting of folding cartons using vacuum grippers • Automatic insertion of products and package leaflets • Fully automatic leaflet feeder (RonTech) • Progressive carton closing, outfeed to the right • Option for color code embossing on carton flaps Carton Size Range • Length (C): 65 – 150 mm • Width (A): 35 – 90 mm • Height (B): 15 – 95 mm Formats / Flexibility • Currently equipped with format parts for 5 ml, 10 ml, and 15 ml eye drop bottles • Includes all necessary format and change parts • Highly flexible machine, suitable for additional bottle, vial, and product formats • Fast and reproducible format changes Features • Operation via touchscreen (all controls at eye level) • Operating manual in German and French Machine Data • Manufacturer: Mediseal, Körber (formerly Klöckner), Germany • Model: P-1500 • Machine No.: 43 • Year of manufacture: 2009 • Electrical connection: 220/400 V, 3 Ph, 50 Hz • Required space: approx. 6,250 × 2,800 × 2,200 mm • Weight: approx. 3,500 kg Condition • Unused, virtually as new • Never put into production • Only FAT and SAT performed • Only 69 documented operating hours Original price in 2009 • approx. €700,000 - €750,000 with one format set Videos showing machine in operation available Price Pgjdpsx Nx Dasfx Airju On request

Year of construction: 1999, condition: used, Embossing machine Kolbus PE 312 Year: 1999 - Case pre-stacking conveyor - Feeder for cases - Case bending station: DBA - Foil transporting device - Case set up outside machine Pgjdpfxozvd U Ie Aireu - Matrix plate 2 - Counter stacker

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Pgjdpeyyzxhsfx Aireu Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) Podpfx Aijwh Tq Ssrsgu • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: new, Hazar Makina HM625 Sublimation Printer Year of manufacture: 2021 Model: 600 Printing width: 2000 mm Calender cylinder diameter: 625 mm Electrical power: 40 kW Electrical power consumption per hour: 18 kW Psdpfx Ajq Rd Rcsiregu Heating system: Heating oil (uniform heat distribution) Machine control panel: 7-inch LCD PLC system Cooling system: Automatic Heating capacity: 30 kW Motor power: 2.2 kW Heating time: 70 minutes Sealing clamp and guide system: Automatic (pneumatically controlled linear slide) Cylinder temperature control: Automatic dual control of the outer and inner surfaces Printing speed: 3–7 meters per minute Felt: Nomex Item condition: Showroom model You can find more printers in other sizes – new and used – in our shop! International shipping available upon request!

Condition: used, Year of construction: 1967, machine/vehicle number: 3659, Kalenderstanze - Calender Punch Machine Renz Super 520Year 1967 - Serial-No. 3659 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Psdpfxoh Axcyo Airogu On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2011, operating hours: 13,600 h, condition: excellent (used), functionality: fully functional, Technical data: BOBST VISIONFOIL 104 Max. sheet format: 1,040 × 740 mm Min. sheet format: 400 × 350 mm Max. embossing/hot foil stamping area: 1,010 × 702 mm Production speed: up to 7,500 sheets/hour Embossing force: up to 2.6 MN (286 US tons) Foil unwinders/web advance shafts: 2 standard Foil width: 25–1,020 mm Max. roll diameter: 250 mm Heating temperature: 20–160 °C Heating zones: 12, individually adjustable Paper: from 80 g/m² Cardboard/solid board: up to 2,000 g/m² Corrugated board: up to 4 mm Machine length: approx. 6.50 m Machine width: approx. 6.00 m Machine height: approx. 2.20 m 4 honeycomb plates Foundation exchange table (third-party product) Machine raised by 300 mm Machine is equipped with a foil braking brush (not visible in the video) or, if equipped with extraction/tube cutter, with a funnel system! High-performance machine for stable foil transport, even at high speeds and with long foil unwinders! Extremely short setup times for sheet processing and foil unwinding! Not a Chinese copy or a Bobst BMA replica! Machine has only 14,000 hours of operation! Condition very good! Bobst platen conditioning performed (die service) 5/26 Can be inspected at any time during production, and is encouraged! Available from December/January 2026/27 Videos available upon request via WhatsApp! Pgsdpszt Idusfx Airju Direct sale to a production company preferred! No dealer options will be offered! A package deal with a Bobst 102E2 is also possible (also with an exchange table and honeycomb foundation for blind embossing)!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, SCHMID T 400 – Toggle cold forming press SCHMID T 400 Toggle cold forming press Manufacturer: SCHMID Type: T 400 Machine type: Toggle press / Cold forming press Year of manufacture: 1997, overhauled in 2004 Pressing force: 4000 kN Machine weight: approx. 17,000 kg Pgsdpfxo Aarm Rs Airju Condition: Fully functional Accessories: Standard accessories Location: Korschenbroich, Germany Application area: Cold forming, toggle presses, embossing and forming of metal parts.

Year of construction: 2022, condition: used, functionality: unexamined, For sale is a package of six Cavitec system modules for processing web-shaped materials: two identical laminating/pressing calenders, two stationary winding stations, and two mobile winding stations. The modules come from a coating or laminating environment for technical textiles, nonwovens, films, or membranes. Position 1: 1 × Cavitec laminating unit / laminating calender Position 2: 1 × Cavitec delaminating unit / identical pressing calender Position 3–4: 2 × stationary Cavitec winding stations; suitability for use as unwinder or rewinder for technical materials to be determined Position 5: 1 × mobile unwinder Position 6: 1 × mobile rewinder Proof of origin: Purchase contract from 2022 with historical photo documentation available. Preferably sold as a complete package; partial sale by agreement. Sale basis: Used, as inspected; dismantling, loading, and transport by agreement. Psdpfxozr Hh Ns Airogu The system is located in 06502 Thale.

Condition: refurbished (used), Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, total height: 4,300 mm, ram adjustment: 100 mm, installation height: 500 mm, table height: 1,000 mm, total width: 2,200 mm, table length: 1,400 mm, pressing force: 200 t, control cabinet width: 2,000 mm, stroke length: 160 mm, clearance between the columns: 1,450 mm, working width: 1,100 mm, distance between side stands: 400 mm, overall weight: 27,000 kg, height adjustment type: electric, space requirement height: 4,500 mm, space requirement length: 2,200 mm, space requirement width: 1,800 mm, High-precision cutting and embossing press, U.T accuracy +/- 0.01, ideal for the production of fuel cell stacks or hydrogen electrolyzers. Pjdpfx Aijt Nf Ageregu hydrogen electrolyzers. The press is also suitable for (smooth) fineblanking, stroke rate 1 - 70 /min. Eccentric loads are also possible without any problems thanks to 4 connecting rod rams. It is also not possible for the press to jam. The press is completely overhauled and supplied with a new Siemens S7 control system.

Condition: used, machine/vehicle number: 21035, Heißpräge - Kniehebelprägepresse - Embossing Hot Stamping Press Krause FNPSerial-No. 4798 Stamping size: 550 x 400 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Pedoh Ayg Uepfx Airegu Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: Pjdpfxj Ad Hino Airjgu – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: used, Year of construction: 2010, functionality: fully functional, Gietz FSA 870 Compact high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 870 x 560 mm : max speed 6,000 sheets / hr Top FSA 870 Compact specification High speed MABEG suction feeder : 6 heating zones : 2 x electronic servo longitudinal foil feeds : non stop delivery Pjdez Hw Tvjpfx Airegu Fully reconditioned by exclusive distributor for Gietz AG , Switzerland in UK

Condition: good (used), PRO-PEN marking machine, a stationary needle embossing device, and a portable device for on-site engraving. These devices are used to permanently mark workpieces with serial numbers, text, or identification markings: a needle strikes many small dots into the surface. Pgsdpfx Aiez N Af Rsrsu Beneath the turquoise housing is the holder where a workpiece or nameplate can be secured. The marking head above it embosses text and numbers into the surface. We sell both devices together.

Condition: used, Year of construction: 2012, The machine is designed for the production of: • Stand-up pouches (Doypack / SUP) with bottom gusset • Three-side seal pouches (3SS) • Flat pouches • Bottom-gusseted pouches with shaped bottom contours Technical Data: • Machine length: 16,900 mm • Machine width: 5,500 mm • Machine passage width: 800 mm • Operating voltage: 400 V, 50 Hz, 3-phase • Control voltage: 24 V DC • Power rating: 125 kW • Current: 235 A • Maximum web feed speed: 3.0 m/s • Maximum output: 150 cycles/min • Maximum output with stacking system: 130 cycles/min • Main operating side: left-hand side in the direction of web travel Production Capabilities • Three-side-sealed pouches • Stand-up pouches • Pouch width: 90–340 mm • Pouch length: min. 80 mm; max. 375 mm (two lanes), max. 750 mm (single lane) • Bottom gusset depth: 20–75 mm • Processable materials: PET/PE, PA/PE, PET/ALU/PE • Film thickness: 80–250 µm Equipment • Shaftless unwind stand with web edge control • Height-adjustable unwinding position • Unwind stand for 152 mm cores • Maximum clamping width: 1,600 mm • Maximum roll diameter: 1,200 mm • Bottom-gusset strip unwind stand with web edge control • Bottom-gusset strip unwind stand for 76 mm cores • Maximum clamping width for bottom-gusset strips: 450 mm • Maximum roll diameter for bottom-gusset strips: 1,000 mm • Dancer system for roll changes during machine operation • Fine-dust extraction for bottom-gusset strips • Hot embossing station • Sealing presses with cooling, complete sealing process Pgodpfx Aioz Szcyorju • Bottom-contour punching unit and bottom opener • Punching-knife holder for 310 mm wide knives • Bottom pre-opening unit with additional embossing function • Longitudinal edge trimming with additional punching unit • Six knife holders with trimming blades replaceable during production • Suction conveyor with three waste-removal rollers for punched corners • Pouch stacking unit with lateral discharge conveyor • Reject diverter into a mesh container • Swivelling packing table • Carton sealer and roller conveyor • Matho central extraction system for punching waste • Extraction of bottom-hole, corner and bottom punching waste • Edge-trim extraction with shredding function • Waste collection in a Big Bag

Year of construction: 2002, condition: used, Computer-controlled hot foil embossing machine Schmedt Präzimark PMK 203 Schmedt Präzimark Hot Foil Stamping Machine (computer-controlled) Includes several type wheels/font sets. Psdpfx Ais Ad I Nisregu 670-4.3 670-5 E 648-17 pt available January 27 Technical data: Machine L x W x H: 850 x 630 x 765 mm Control cabinet L x W x H: 135 x 370 x 665 mm Space requirement L x W x H (machine only): 1200 x 890 x 1100 mm Weight, including control cabinet: 80 kg Power type: Alternating current, 1 phase Frequency: 50 Hz Voltage: 230 V Rated current: 2.0 A Output: 0.6 kW Fuse in the supply line: 10 A Cross-section of the supply cable: 1.5 mm² Length of connection cable: 2 m Pneumatic pressure: 0.6 min MPa

Condition: used, CORTELLEZZI MECHANICAL CALENDER 2500 mm, DIMENSIONS: 480X100X 130 (h) mm. UPPER ROLLER 200 mm, TWO LOWER ROLLERS 170 mm. NO INVITATION, IT BENDS PROFILES. BENDING THICKNESS 8 Psdjv Ifinepfx Airegu

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2022 Control : Siemens 840 Dsl Speed : 25000 rpm Movement X/Y/Z : 200/350/300 mm Tool holder : HSK 40 In General: Year of manufacture:2022 Control system:Siemens 840 Dsl Travel ranges X/Y/Z:200/350/300 mm Speed:25,000 rpm Tool holder:HSK 40 Spindle: Technology:2 motorised spindles Spindle centre distance:200 mm Speed:25,000 rpm Tool holder:HSK 40 Double-swivel mount: Technology:A-axis or U-axis with counter-bearing Drive:Direct drive (torque motors) Loading module: Technology:Industrial robots Manufacturer:Fanuc Model:LR Mate 200iD Gripper:Double gripper Workpiece marking:Needle embossing station (DMC) Workpiece feed: Technology:L-shaped infeed and outfeed conveyor Workpiece carriers:20 Dimensions:190 x 150 x 15 Workpiece capacity:20 Dimensions:220 x 160 x 240 mm Equipment: Tool magazine:40 positions (2 × 20) Position measurement systems:Direct on all axes Chip removal:Chip conveyor Coolant supply:IKZ system, 80 bar Hydraulic clamping:3 clamping circuits per side Automatic rinsing cycle:Workpieces + clamping device Contact monitoring:Pneumatic Tool breakage monitoring:Inductive Pgodpfx Aszrkn Tjirsu

Condition: used, functionality: fully functional, total length: 48,000 mm, total height: 6,464 mm, Year of construction: 2019, Offered for sale directly by the owner: 2019 FONG KEE TSE-90/150/150-2400 three-layer co-extrusion flat sheet & roll line with only 7,000 operating hours. Used exclusively in our own production, the line remains fully assembled indoors at our facility in Torbalı, İzmir, Türkiye, and is available for live running inspection by prior arrangement. Equipped with top-tier Western components (NORDSON EDI USA die & feedblock, 3x MAAG Switzerland melt pumps, Dynisco USA sensors, Siemens PLC/drives, and Schneider switchgear), this line delivers European-grade optical surface quality. KEY HIGHLIGHTS * Production-Proven Thickness up to 3.0 mm: Although factory paper specs listed 0.3–0.8 mm for thin furniture foil, in our own production we have successfully produced both PET (0.3–3.0 mm) and PMMA/ABS (0.6–3.0 mm) sheets up to 3.0 mm thick. * Multi-Polymer Capability: Production-confirmed across PET, PMMA, ABS, PS (HIPS/GPPS), PC, and PP in A/B/A or A/B/C structures. * Optical Mirror-Gloss & Matte Finishes: Produces both optical-grade mirror gloss and anti-glare matte finishes. An additional dedicated matte calender roll is included. * Dual Downstream (Sheets & Rolls): Features BOTH an automatic guillotine cutter + vacuum sheet stacker AND a double-station turret winder. 1. MAIN SPECIFICATIONS * Manufacturer & Model: FONG KEE (Taiwan) – TSE-90/150/150-2400 * Year / Hours: 2019 / 7,000 h * Configurations: 3-Layer (A/B/A or A/B/C) * Net Trimmed Sheet Width: 1,500 – 2,100 mm * Sheet Thickness (Production-Proven): PET 0.3–3.0 mm | PMMA/ABS 0.6–3.0 mm * Max. Output: Up to 1,000 kg/h (depending on resin & thickness) * Line Speed: 3 – 10 m/min 2. EXTRUSION & MELT DELIVERY * 3x Vented Single-Screw Extruders: - Extruder A: Ø90 mm, L/D 35:1 (Vented) - Extruder B: Ø150 mm, L/D 32:1 (Vented) - Extruder C: Ø150 mm, L/D 32:1 (Vented) * Filtration: 3x Hydraulic screen changers * Melt Pumps: 3x MAAG (Switzerland) gear melt pumps * Sensors: Dynisco (USA) melt pressure & temperature transducers * Feedblock: EDI Ultraflow I (USA) 3-layer feedblock * Extrusion Die: EDI Ultraflex HRC 100 Fastgap (USA), 2,300 mm width 3. CALENDERING & DOWNSTREAM * Polishing Stack: Horizontal 3-roll stack (Ø400/600/600 × 2,400 mm), hard-chrome mirror rolls with individual TCUs * Spare Roll: 1x Additional dedicated matte calender roll included * Masking: Dual-side protective film lamination * Haul-Off: Cooling conveyor, edge-trimming, and precision haul-off unit * Cutting & Stacking: Automatic guillotine cross-cutter + automatic vacuum stacker * Winding: 2-station turret winder with automatic tension control 4. AUTOMATION & COMMERCIAL TERMS * Controls: Siemens SIMATIC PLC with HMI panels, Siemens SINAMICS G120 drives, Schneider switchgear, air-conditioned cabinets. Podpfjzzdnfox Airjgu * Ideal Applications: Furniture foils/laminates, white goods/refrigerator liners (HIPS/ABS), sanitaryware (PMMA/ABS), optical/lighting sheets (PMMA/PC/GPPS), thermoforming rolls (PET/PP). * Asking Price: USD 790,000 EXW Torbalı, İzmir, Türkiye (Open to reasonable offers for a prompt sale).

Condition: used, axle configuration: 2 axles, first registration: 02/2023, next inspection (TÜV): 03/2027, Year of construction: 2023, Load securing: Body certified to EN 12642 XL. Drinks certificate. Daimler 9.5 certificate. 2 identification plates at the rear, 565x200, ECE-R70, vertically on the rear panel. Vehicle complies with EC type approval with Certificate of Conformity (CoC). 1 folding GGVS sign. Front crossmember height 125mm, rear 400+28mm, Smart Generation. Chassis: Standard version. "MODULOS" bolted chassis. E-bike holder, corbel version, screwed for 2 e-bikes, behind the unit. 10-year warranty against rust-through on galvanized parts (see warranty terms). Wheelbase 7700 mm. Axle distance 1310/1310 mm. Outer frame with Speed Curtain on both sides. Underrun protection. Kingpin: 2" according to SAE standard, interchangeable. 1 kingpin position 1690mm. Lateral impact protection in conjunction with a pallet box. Starting aid (liftable front axle), activated by "3x braking". Circular driving with the lifted 1st axle is not possible. Starting aid (liftable front axle), activated by "3x braking". Only permitted for use as a starting aid. Model SCS 24/L - 13.62 E B. Manufacturing date 01.02.2023. Body length 13620 MM. Body width 2480 MM. Front wall height 2400 MM. Body height at the front 2680 MM. Body height 2680 MM. Lateral front passage height 2600 MM. Lateral rear passage height 2600 MM. Total height at the front, unladen 4002 MM. Total height at the rear, unladen 3907 MM. Loading height at the rear, unladen 1197 MM. Tire size 385/65R22.5. Total weight (permissible/technical) 36000/39000 KG. Payload (permissible/technical) 28875/31875 KG. Unit weight (permissible/technical) 24000/27000 KG. Saddle load (permissible/technical) 12000/15000 KG. Tare weight, complete 7125 KG. Fifth wheel height, unladen 1155 MM. Ride height 270 MM. Wheelbase 7700 MM. Rear door height 2648 MM. Rear door width 2480 MM. Brake disc diameter approx. 430mm. ROTOS SCB running gear system (disc brake). Axle SCB 9 t, SP2040, FM1300, ET 120, disc brake 430 mm. Wheel fastening by center centering according to DIN 74 361 part 3. SCB air suspension type: MRH-KM30. Two-circuit compressed air braking system with standard couplings. Steel air tank. EBS 2S/2M with stability program. EBS power supply via ISO 7638 + CAN. Double diaphragm spring accumulator cylinder. Lifting and lowering device with AUTO-RESET function. 2 chock blocks with holder. Support jack, manufacturer "JOST", semi-circular foot with plate, single-sided operation, low maintenance. 1 LED lighting system 24V with multi-chamber light and dynamic turn signal. 2 sockets, 7-pin, 1x DIN ISO3731 / 1x DIN ISO1185 and 1 socket ISO12098. Continuous lamp carrier, color white, with "SCHMITZ" embossing. LED side marker lights coupled with turn signals. 1 pair of LED side marker lights. Without rear warning system / ramp approach aid. Tire brand: SCB ""SELECTION"" Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone. Regional transport tires (M+S). 6 tires 385/65R22.5 (11.75x22.5). Steel wheels, ET 120. Protective caps for wheel nuts. Anti-spray mud flaps with Schmitz logo. Lashing eyes: 30 pairs in the outer frame, 2 tons tensile force per eye, according to EN 12640. Ram protection for running rail, Speed Curtain. Pallet stop, straight on both sides of the outer frame, 19mm high, internal dimension 2460mm. Rubber ram protection at the rear. 2 rubber bumper buffers, vertically on the lamp panel. Pallet box for 24 Euro/16 ISO pallets. Ground clearance of the pallet box 286 MM. Holder for light and brake connection at the front of the headboar Pgsdpfxjzg R Hre Airsu

Condition: used, For sale is a TOX Pressotechnik press, type MBG 004.124. The machine has a pressing force of 40 kN, which corresponds to approximately 4 tons, and is suitable for industrial pressing, joining, assembly, riveting, embossing, and upsetting operations. A particular highlight is the current inspection: The machine is inspected and certified until [date]. Technical data: - Manufacturer: TOX Pressotechnik - Type: MBG 004.124 - Product type: Press / Insertion machine / Joining machine - Pressing force: 40 kN - Maximum air pressure: 5 bar - Total stroke: 200 mm - Working stroke: 80 mm - Year of manufacture: 2001 - Machine serial number: 210192.1 - Machine number / Electrical: 210193.1 Podeznkvpopfx Airegu - Rated voltage: 230 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Power: 0.2 kW - Rated current: 0.5 A - Fuse rating: 16 A - Protection class: IP65 - Standard: DIN EN 60204 - Circuit diagram: STE 325-26 - Country of manufacture: Germany - Inspection valid until: [date] Condition: used The press operates with a total stroke of 200 mm. The actual working stroke is 80 mm, providing a maximum pressing force of 40 kN. The machine is suitable, for example, for inserting bushings, bearings, and bolts, as well as for assembly, riveting, embossing, upsetting, and joining operations. The exact condition and scope of supply can be seen in the images. You can find more presses and industrial machines – new and used – in our shop! "Everything from one source: We will be happy to offer you suitable financing for your project." PD

Condition: like new (used), functionality: fully functional, number of rollers: 4, roller (bottom) diameter: 660 mm, roller (top) diameter: 660 mm, side roll diameter: 525 mm, working width: 3,050 mm, sheet thickness (max.): 60 mm, overall weight: 1,13,000 kg, total length: 6,500 mm, total width: 5,200 mm, total height: 4,250 mm, Equipment: documentation/manual, HYDRAULICS Useful length mm 3050 Thickness mm 60 Upper roller diameter mm 660 Pgjdpfxswrnkhj Airsu Lower roller diameter mm 660 Side roller diameter mm 525 Lower roller movement mm 110 Bending roller movement mm 465 Approx. weight kg 113,000 USED MACHINE OVERHAULED