Used Blohm Precimat 306 Et for sale (7,704)

Condition: used, Year of construction: 2016, Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Technical data - Manufacturer: Scaligera - Model: ULISSE 4000 - Year of manufacture: 2016 - Machine type: sleeve labeler with steam shrink tunnel - Output: up to 4,000 cans/h - Containers: sleek and standard cans - Machine direction: left to right - Power supply: 400 V, 3-phase, 50 Hz - Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) - Max. current: sleever 7 A, steam tunnel 10 A - Compressed air (sleever): 6 bar - Steam supply (tunnel): 6 bar, up to 200 kg/h - Weight: sleever approx. 850 kg, steam tunnel approx. 350 kg - CE mark on both machine plates Equipment Bodpfx Afsz H N Hhe Asdh - Scaligera ULISSE 4000 sleeve applicator with infeed screw and guarded, windowed housing - Scaligera TVP2SE steam shrink tunnel (2016) with two inspection windows and pressure gauges - Electrical control cabinet with push-button operation and signal tower Condition Used. The machine was in production until early September 2023 and is now dismantled, so it cannot be shown in operation. Sold without warranty. Availability Immediately. Location: Belgium.

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h Bdodjz Ar D Ropfx Af Ash MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 814 kg, maximum load weight: 1,886 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 3-way tipper + enclosed leaf guard 60cm NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Bodoz Egkhspfx Af Aedh Loading area height: 66cm Total weight: 2700kg Payload: 1886kg braked tandem trailer overrun brake and parking brake from KNOTT 2x 1350kg axle with brake low chassis fully welded, hot-dip galvanized steel frame aluminum profile side boards with tension lock can be folded down and removed on all sides enclosed leaf guard 60cm made of hot-dip galvanized steel can also be opened and removed on all four sides 15mm thick, non-slip and robust screen-printed wood floor additional steel plate on wood floor automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force reinforced 13" C tires with steel valve M+S tires net/rope hook on the frame 13-pin connector LED marker lights at the front lights at the rear with reversing light and triangular reflectors upper frame mounted on rubber large tipping angle of 51 degrees to the rear hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side boards (price reduction) -Side board height increased to 35cm -Black Edition (powder-coated side boards and rims in black) -integrated loading ramps 2800kg -electric tipping control -charger -remote control -Bluetooth remote control -emergency hand pump in combination with electric control -safety support for maintenance work on the tipped vehicle -foldable crank for rear supports -complete LED lighting -theft protection -net with fine or coarse mesh -H-frame -leaf guard in various heights, also closed -additional side boards 30cm with tension lock -flat cover with or without railing -high cover 160cm or 180cm further accessories on request! plus. freight to Gera and vehicle registration document €250 net Images are for illustrative purposes only and may show optional accessories at an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come by directly.

Year of construction: 1985, condition: used, functionality: not functional, PAPER MACHINE PM 5 – PAMA / VOITH / VALMET Used Paper Machine PM 5, originally built in 1985 and modernised and expanded several times throughout its operating life. The paper machine is an individually configured production line consisting of several machine sections and systems supplied by recognised manufacturers in the paper machinery industry. MAIN MACHINE SECTIONS Approach flow system: PAMA Headbox: Voith Fourdrinier section: PAMA Top-wire former: Valmet Press section: PAMA Dryer sections: PAMA SpeedFlow system: Voith After-dryer section: PAMA Calender: PAMA Bdsdsz Hvmhepfx Af Aeh Pope reel: PAMA KEY TECHNICAL DATA Year of construction: 1985 Maximum operating speed: up to 600 m/min Machine / working width: approx. 2,730 mm Trimmed working width: approx. 2,640 mm Maximum gross production capacity: up to 150 t/day Basis-weight range: approx. 45–130 g/m² Installed electrical power: approx. 2.5 MW Maximum steam consumption: up to approx. 16 t/h PAPER GRADES The machine was used for the production of: Office papers Copy papers Writing papers Printing papers Envelope papers Newsprint papers MODERNISATIONS Known major modernisation projects include: Valmet top-wire former installed/retrofitted in 1994 Approach flow system expansion and modernisation in 2002–2003 MAP quality control system installed/modernised in 2006 Voith SpeedFlow system installed in 2009 Automatic tail cutter installed in 2025 CURRENT STATUS The paper machine is currently shut down and out of operation. The last production day and last known date of operation was 23 January 2026. Until shutdown, the machine was regularly used for paper production and its essential systems were operational. The machine has not been restarted since shutdown and therefore no current functional test under production conditions has been carried out. The essential machine assemblies remain installed at the original site. ADDITIONAL EQUIPMENT / SPARE PARTS Various spare and replacement parts are available, including spare screen baskets, rotors, rolls and other machine-related spare and wear parts. The exact scope and condition of the spare parts can be documented during the ongoing inventory. Further technical documentation, photographs of nameplates and serial numbers, spare-parts information and details regarding the stock preparation, deinking, finishing and auxiliary equipment are available / being compiled. Maximum speed 600 m/min Working width 2,730 mm Trimmed working width 2,640 mm Production capacity 150 t/day Basis weight 45–130 g/m² Installed electrical power 2.5 MW Maximum steam consumption 16 t/h

Condition: used, mileage: 1,45,535 km, power: 81 kW (110.13 HP), first registration: 03/2014, fuel type: electric, overall weight: 4,250 kg, color: white, gearing type: automatic, number of seats: 3, loading space volume: 18 m³, loading space length: 4,200 mm, loading space width: 2,290 mm, loading space height: 1,900 mm, Year of construction: 2014, Equipment: ABS, central locking, ORTEN Electric-Trucks ET 35 M Pricing taking into account the subsidies for conversion from diesel to electric in 2018 (approx. 40,000 km) Technical data for the chassis: Manufacturer: Mercedes-Benz Vehicle type: Sprinter chassis GVW: approx. 4,250 kg Empty weight: approx. 3,350 kg Payload: approx. 900 kg Paintwork: white Technical data for the conversion: Top speed: 80 km/h Battery: lithium iron phosphate (LFP) Engine power: 81 kW Torque: 1,150 Nm Electric motor: Synchronous electric motor Information display: Display of all relevant battery, BMS*, engine and control data DC/DC converter Battery boxes, covers and brackets in V2A design Electronic operating instructions in short form (in 3 Languages) *BMS (Battery Management System) with integrated balancing function and CAN bus connection * Payload: approx. 900 kg * Range: approx. 200 km when driving at a constant speed of max. 60 km/h on a 1% gradient, range depends on load, driving style and route conditions * Charging time: approx. 4 hours * On-board energy: 87 kWh Leasing example ORTEN Electric-Truck ET 35 M: 49,900.00 net purchase price 36 month term calculated residual value: 10,000.00 ¤ 1,232.00 ¤ monthly rate plus VAT Rental offer ORTEN Electric-Truck ET 35 M: Delivery date: immediately The rental includes registration, tire wear, inspection and TÜV approval, service work and wear repairs. Bdodpfxervdgle Af Ajh Not included: Damage or damage caused by incorrect operation Non-cancellable term Demonstration price: 1st week free and from 2nd week 400.00 ¤ plus VAT, maximum 4 weeks Rental period at least 3 months - monthly rental rate 1,390.00 ¤ plus VAT From 12 months: price per month 1,290.00 ¤ plus VAT From 24 months: price per month 1,140.00 ¤ plus VAT plus monthly insurance costs: 275.00 ¤ plus VAT Fully comprehensive insurance with excess 2,500.00 ¤ plus VAT Partial comprehensive insurance with excess 500.00 ¤ plus VAT From Ingolstadt location. Pricing plus statutory VAT. Offer subject to change, credit check required, errors excepted.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 747 kg, maximum load weight: 1,953 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 170 2700 2, Rear Tipper + Enclosed Leaf Grid 60cm NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading platform height: 66cm Total weight: 2700Kg Payload: 2073Kg Braked tandem axle trailer Overrun brake and handbrake by KNOTT 2x 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning closure Can be folded down and removed on all sides Enclosed leaf grid 60cm made of hot-dip galvanized steel Also can be opened and removed on 4 sides 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on the wood floor Automatic support wheel with 400Kg support load 6 noise-reducing lashing eyes with 800Kg tensile force Reinforced 13" C-tire with steel valve M+S tires Net/rope hook on the frame 13-pole connector LED marker lights at the front Lights at the rear with reversing light and triangular reflector Upper frame mounted on rubber pads Bdedpfx Afjz A T Uhj Aeh Large tilting angle of 51 degrees rearwards Hand pump with adjustable handle OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side boards (price reduction) -Side board height increased to 35cm -Black Edition (Powder-coated side boards and rims in black) -Integrated ramp rails 2800Kg -Electric tilting operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also enclosed -Extension side boards 30cm with tensioning closure -Flat cover with or without bows -High cover 160cm or 180cm Further accessories available upon request! Plus shipping to Gera and vehicle registration document 200 € net. Pictures are examples and may show optional accessories that incur extra costs. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all kinds of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: good (used), Year of construction: 1987, turning diameter over cross slide: 810 mm, spindle bore: 130 mm, turning diameter: 1,140 mm, turning length: 7,500 mm, quill stroke: 300 mm, total length: 7,500 mm, total width: 2,300 mm, total height: 1,650 mm, bed width: 600 mm, Please note: not original pictures its only 3000 length not 5000 mm   3 Guide way construction 2 Axis HeidenHain Digital readout Feed in 3 directions all tool post slide Central lubrication   Work load flying in chuck 2500 kg Work load NOT supported 8500 Kg Work load supported 10000 kg   Optional 4 chuck approx. 1200 mm Optional 4 chuck approx. 1500 mm Optional package with 3 steady rest fixed model from  .... to ....  Turning length: 5000 / 7500mm Turning diameter bed Ø: 1140mm Bodpfov S Dp Isx Af Aodh Turning diameter slide: 810mm Turning diameter pit Ø: 1500mm Pit length: 2500mm Spindle bore: 130mm Bed width: 600mm Quill: 130Ø Quill stroke: 300mm Spindle mount: 6Mk Power: 25kW Speed: 9 - 900rpm Length: 7500mm Width: 2300mm Height: 1650mm Weight: 12000kg

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,301 h, load capacity: 4,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, drive type: Elektro, Four-way side loader Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Bsdpfxszfb Ane Af Aodh Side shifter, fork positioner, 3rd valve, 4th valve, STVZO compliant, full cabin, full free lift

Condition: used, - Model: ET 94/SC - Serial number: SN006968 - Year of manufacture: 2014 - Number of decks: 4 - Number of doors: 1 - Internal dimensions (WxD): 920x1300 mm - Oven dimensions (WxDxH): 1440x2010x2720 mm Bsdpewxmnxsfx Af Aedh - Oven height + extractor: 2300 + 420 mm - Total oven length with integrated loader: 3870 mm - Loading bay with integrated loader (E): 1860 mm + 370 mm - Baking surface: 4.80 m² - Power: 20.04 kW - Voltage: 400 V - Weight: 2000 kg - Sold with integrated stainless steel loader - Refurbished equipment: the equipment is prepared upon order; lead times for collection and return are agreed at that time (please request price after refurbishment) The listing was translated automatically. Translation errors are possible.

Condition: used, machine/vehicle number: 10461, 3-blade rotor (offset blades) 2 rows of stator blades Rotor diameter 300 mm Working width 600 mm Inlet cross-section approx. 440 x 600 mm Bdsdpjyr Th Rjfx Af Ajh

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 1361, product width (max.): 330 mm, working width: 330 mm, product height (max.): 1,000 mm, number of drawers: 8, power of the servo motor: 75 W, roll diameter: 70 mm, year of last overhaul: 2023, type of input current: DC, overall weight: 8,600 kg, total height: 2,300 mm, total length: 10,000 mm, total width: 1,500 mm, warranty duration: 0 months, Equipment: documentation/manual, OMET FLEXY – 2008 MODEL • 8 Colors • Printing Width: 33 cm • Cold Foil + Hot Foil Bsdpez Di Efefx Af Aodh • Reverse-Side Printing • GAP MASTER + 3 Separate Die-Cutting Units • Full UV Coating • Motor Power: 100 kW

Condition: like new (used), functionality: fully functional, fuel type: electric, Material width for the material inlet: 500 mm METRO 55 HACKER – a professional machine for shredding wood waste. A powerful sawmill shredder, designed for shredding wood waste, branches, boards, and production residues in sawmills and wood processing plants. Its robust construction and powerful cutting system ensure reliable and efficient operation even under heavy loads. The machine is ideally suited for the production of firewood chips, biomass, and material for further processing. Material width for the material inlet: 500 mm Number of blades: 2/3/4 Main engine power: 55 kW Power of the feed motor: 2x3 kW Feed speed: 25 m/min Automatic motor load control. Product features: - High work efficiency, - Robust steel construction, - Safe material feed system, - Possibility of continuous operation, - Easy operation and maintenance, - Use in sawmills and industrial plants. Application: Bdjdpfx Afjz H Tvas Ajh Shredding wood and sawmill waste, Wood chip production, Biomass processing, Recycling of wood waste.

Condition: used, mileage: 500 km, power: 70 kW (95.17 HP), first registration: 05/2024, fuel type: electric, overall weight: 4,250 kg, color: white, number of seats: 3, total length: 6,040 mm, total width: 2,200 mm, total height: 2,780 mm, loading space volume: 15 m³, loading space length: 3,400 mm, loading space width: 2,080 mm, loading space height: 1,570 mm, Year of construction: 2024, * ORTEN CityRollup body * All-aluminum body with segmented roll-up doors * 2 compartments at 2,057 mm + 2 compartments at 1,320 mm * DEKRA certified according to VDI 2700 ff and DIN EN 12642 XL * Range approx. 200 km * Battery: Lithium Iron Phosphate * Battery capacity: 80 kWh, 400 V * Leaf spring suspension ORTEN Electric Trucks E 35 with roll-up door body: Pricing takes subsidies into account. Technical data chassis: Manufacturer: ORTEN Vehicle class: N2 GVW: 4,250 kg (driver's license class B) Unladen weight: 2,295 kg Wheelbase: 3,745 mm Tires: 185/75 R 16C Equipment: Seats: 1+2 * Rear axle ratio i = 4.1 * Rear axle stabilizer * Disc brakes front * Drum brakes rear * Driver airbag * Fog lights * Heat-insulating glass * Driver's seat, "Luxury" version * Central locking * Electrically adjustable exterior mirrors * Storage compartments in the front doors, left and right * Multimedia 2DIN with USB port * Hands-free system * ABS * Summer tires * Spare wheel, supplied loose * Wheel chocks with holder (vehicle class N2) * Cab color similar to signal white RAL 9003 * Chassis color: graphite black * Rim color: silver * Warning triangle * First-aid kit * Hazard warning lights * Operating manual Technical data of the conversion: * Maximum speed: 85 km/h * Range: approx. 200 km * Battery: Lithium Iron Phosphate (LFP), nickel and cobalt-free * Battery capacity: 80 kWh, 400 V / DC * Charging connector: Type 2 Mode 3 / AC / IEC 62196 * Charging time: approx. 3.5 hours at 400 volts / 22 kW AC * Electric motor: Synchronous electric motor, water-cooled * Motor power: 70 kW / peak 92 kW * Torque: 410 Nm / peak 730 Nm Technical equipment: * Regenerative braking power * 22 kW on-board charger AC * DC/DC on-board power converter * Electric power steering assistance * BMS-CAN-BUS-controlled charging technology * Electric 5 kW HV cab heater * Color display, showing all relevant battery, BMS, motor and control data * Diagnostic menu for motor control and BMS integrated in the information display * Diagnostic menu for battery cell monitoring integrated in the information display * Structural elements in stainless steel * Battery heating system HV 400 volts / DC (only in charging mode) * Vehicle acceptance test according to § 13 EG-FGV / ECE R100 ORTEN City Rollup body Body dimensions: Overall length: approx. 3,600 mm, floor slope: 0 mm Overall height: approx. 2,360 mm, compartment width: front 2057 / rear 1320 mm Bdodpfx Afsqz R Dme Ajh Overall width: approx. 2,200 mm, compartment height: 1575 mm Aluminum roll-up doors: Roll-up with spring assistance. Rubber band for pulling down the roll-up doors. In the closed position, the doors are centrally secured by a locking handle, which is mounted on each side of the front panel and can be locked with a padlock. Pallet stop: Pallet stop approx. 20 mm on the outer edge of each compartment, welded to prevent goods from sliding against the door. Underrun protection: Original chassis underrun protection is used. Rear wall: Fixed rear wall. Double-walled, clad with aluminum with a smooth surface. Painting: Exterior of the body painted in RAL color. Lettering can be done according to specifications for an additional charge. Side steps: The side underrun protection consists of running boards with a non-slip surface for the driver. Steps along the body on both sides of the vehicle, between the axles and behind the rear axle.

Condition: new, maximum load weight: 2,006 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, total width: 183 mm, Year of construction: 2025, Available Immediately! ---- SARIS K3 306 170 2700 2 Three-way Tipping Trailer 2.4t Payload! A wide range of SARIS trailers in stock. Feel free to call us so we can offer the right configuration for your needs. Looking for a different model, engine, dimensions, or other options? Just ask us! We offer attractive financing and leasing solutions—even for the Netherlands, Austria, and business start-ups! ---- Trailer: Like-new condition * Model: K3 306 170 2700 2 * 13" wheels * Tandem axle * Gross weight: 2.7 tons * Accident-free * V-Drawbar * Braked Technical specifications: * Steel sheet-composite floor * Robot-welded frame * Fully hot-dip galvanized chassis * Double-walled side panels, 30 cm high * Locking fasteners * Four folding sides * Mesh hooks on hinges * Heavy-duty automatic jockey wheel * 80DaN lashing eyes (noise-reducing) * Rope hooks Optional extras for the body are available for an additional charge. Please contact us—our sales team is happy to advise you. ---- Just give us a quick call before you visit and we'll make sure your desired vehicle is ready on site. Bdsdpfxex Epi Ss Af Ajh If the vehicle is not located in Wachtendonk, we are happy to deliver it from our large inventory. Customized configurations available on request—please contact us! Service: * Europe-wide delivery available at extra cost * Export formalities available at extra cost * Attractive financing and leasing options * Further services available on request! If you have any further questions, need technical details, or would like detailed photos, we are always happy to assist you. No liability for typographical errors. Subject to prior sale and errors. Dear Interested Party, For over 27 years, we have been your trusted partner for vehicles of all kinds. A preliminary appraisal for your trade-in is available on request. Do not hesitate to call us or send an e-mail. Our online sales team is happy to answer any questions you may have. Best regards, Pimenta Automobile

Condition: used, Surface grinding machine BLOHM, Type HFS 6 Manufacturer's No.: 10493 Year of manufacture: 1973 Electromagnetic clamping plate 600 x 300 mm Grinding length 600 mm Grinding width 400 mm Table longitudinal travel max. 650 mm Cross travel 350 mm Distance spindle center - table surface max. 600 mm Distance spindle center - magnetic plate max. 517 mm Table clamping area 1020 x 300 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore 76 mm Table longitudinal feed 2-30 m/min, stepless Table cross feed 2-65 mm, stepless, electric Cross feed rate 3 m/min Vertical feed 0.001 - 0.020 mm per increment Vertical feed rate 0.250 m/min Grinding wheel speed 1400 / 2800 rpm Hydraulic pump motor power 2.2 kW Grinding spindle motor power 5 / 6 kW Bdjdpfxod Hbafo Af Ajh Power connection 380 V, 50 Hz Total power 11 kW - Automatic depth feed - Hydraulic table longitudinal travel - Grinding wheel dressing device on the spindle head - Electromagnetic plate, height 83 mm - Coolant system, separate, with magnetic filter in the filter housing - Grinding spindle lubrication - Separate control cabinet (800 x 500 mm) - Swiveling control panel - Operating manual and spare parts catalog Space requirement L x W x H 3000 x 2200 x 2100 mm Weight of surface grinding machine 3000 kg Weight of control cabinet 200 kg Good condition

Condition: excellent (used), Year of construction: 2014, Number of axis: 4 Reach: 3000 mm Bdsdpfoz E Rkfsx Af Aoh Payload: 10 kg

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 750 kg, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 Three-sided tipper + integrated aluminum loading ramps NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 2006kg Braked tandem axle trailer Overrun brake and handbrake from AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wooden floor Additional steel plate on the wooden floor Pair of aluminum loading ramps with a 2.8T load capacity in the rail compartment Automatic support wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber pads Large tipping angle of 49 degrees backwards Lateral tilting by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS loading ramp OPTIONAL ACCESSORIES – PERMANENT PRICE REDUCTION FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side walls (price reduction) -Black Edition (Powder-coated side walls and rims in black) -35cm side walls -Charger -Electric tipping control -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on a tilted vehicle -Folding crank for rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side walls 30cm with tensioning latch -Flat cover with or without bows -High cover 160cm - 200cm Further accessories available upon request! Plus freight to Gera and vehicle registration document 250 € net Images are for illustrative purposes and may show optional accessories at an extra cost. Haven't found the right trailer yet? Bodpfx Afszxryds Aodh We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come by directly!

Condition: ready for operation (used), Siemens 1FT3066-0AF61-9 - Z Permanent Magnet Motor SN:EC283231601004, Z= A22, G45: holding brake installed, G51: preparation for encoder system, used, normal signs of use, 100% functional, scope of delivery as per photos Bdedpfoufcfcjx Af Ajh

Condition: ready for operation (used), Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-L3-NN-FW IndraDrive Cs compact inverter MNR: R911335595 SN:7260409116208, used, in good condition, 100% functional, scope of delivery as per photos. Bedpfox Et Uxex Af Asdh

Condition: ready for operation (used), Year of construction: 1991, Flow rate: 1500 m³/h Drive motor: 380 V, 2850 rpm, 1.5 kW Bsdpfxswx H Dyj Af Asdh Extraction pipe diameter: 140 mm 3-meter sections with 3 joints, height-adjustable Intake funnel with throttle valve Space required: 1150 x 600 x approx. 2300 mm

Condition: used, Year of construction: 2007, Overview Robotic end-of-line palletizing system from a wine bottling plant, consisting of two ABB FlexPalletizer robot cells, an empty-pallet destacker, a Strapex SWR 30 rotating-ring stretch wrapper with its chain conveyor, and the safety fencing of the installation. The robots stack the packed cases onto pallets fed from the destacker; the loaded pallets run on the chain conveyor through the wrapper. The system is still installed in Belgium and can be viewed by appointment. Bdsdpfx Afjz Hvu So Aeh Technical data - Robots: 2 x ABB FlexPalletizer, 4-axis, each with its own ABB robot controller - Gripper clearance: 1,200 x 240 mm - Pallet size handled by the destacker: 1,100 x 1,200 mm - Stretch wrapper: Strapex SWR 30, rotating ring, film width 500 mm, clearance diameter 2,000 mm - Wrapper pallet loads: 1/4 EURO, 1/2 EURO, EURO and 1,200 x 1,000 mm, load height up to 2,400 mm - Film: pre-stretched LLDPE, pre-stretch levels 160 %, 230 % and 260 %, ring rotation 18 rpm - Wrapper connection: 3 x 400 V, 50 Hz; compressed air 6 bar Scope of Delivery - Palletizing robot | ABB | FlexPalletizer | 4-axis, robot 2,600 x 1,200 x 3,680 mm, control unit 700 x 660 x 1,050 mm, plus a spare gripper on a steel frame (1,340 x 610 x 640 mm) - Palletizing robot | ABB | FlexPalletizer | 4-axis, robot 2,600 x 1,200 x 3,680 mm, control unit 700 x 660 x 1,050 mm - Pallet destacker | steel roller conveyor, roller width 1,050 mm, 6,200 x 2,500 x 2,550 mm, with steel infeed frame 3,000 x 1,500 x 2,100 mm - Stretch wrapper | Strapex | SWR 30 | rotating ring, 2,830 x 1,810 x 3,520 mm - Chain conveyor | 3 chains, chain width 1,120 mm, 8,300 x 1,650 x 620 mm - Safety fencing | 10,000 x 10,600 x 2,310 mm Condition Used, still installed. Viewing possible by appointment. Availability Immediately available.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 726 kg, maximum load weight: 1,974 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 – Three-sided tipper with electric tipping system NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 1974kg Braked tandem trailer Overrun brake and handbrake by AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Electric tipping system 12V 95Ah AGM battery Electronic tipping limiter Plug + socket for charging Aluminum profile side panels with tension lock Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wooden floor Additional steel plate on the wooden floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber Large tipping angle of 49 degrees backward Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS ramp OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side panels (price reduction) -Black Edition (Powder-coated side panels and rims in black) -Integrated ramps 2800kg -35cm side panels -Battery charger -Remote control Bjdpfxjzu Sgvj Af Ajdh -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on tilted vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tension lock -Flat tarpaulin with or without bars -High tarpaulin 160cm - 200cm Further accessories available on request! Plus freight to Gera and vehicle registration document €250 net Pictures are examples and may show optional accessories that incur additional costs. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come directly to us!

Condition: like new (used), Year of construction: 2025, Spindle configuration: 1. Spindle: Surfacing spindle – 4 kW 2. Spindle: Vertical spindle, right – 5.5 kW 3. Spindle: Vertical spindle, left – 5.5 kW 4. Spindle: Upper horizontal spindle – 4 kW 5. Spindle: Lower horizontal spindle – 4 kW 6. Spindle: Universal spindle – 4 kW Spindle speed: 6,000 rpm Bodpfsz H Uliox Af Aedh Spindle diameter: 40 mm Working area Working width: 25–230 mm Working height: 10–120 mm Min. workpiece length: 450 / 630 mm (depending on the model) Feed rate Continuously adjustable: 5–25 m/min Feed rollers Ø 140 mm Infeed table 2,000 mm Tooling range Vertical spindles: 100–180 mm Horizontal spindles: up to 180 mm Max. profile depth, vertical: 40 mm Equipment Manual table and central lubrication Robust industrial design, smooth operation and high precision

Condition: ready for operation (used), Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-S4-NN-FW IndraDrive Cs compact frequency converter MNR: R911340084 SN:7260408670599, used, in good condition, 100% functional, scope of delivery as shown in photos. Bjdpfx Asx Et U Esf Aedh

Condition: new, functionality: fully functional, power: 13.8 kW (18.76 HP), fuel type: diesel, color: yellow, overall weight: 1,588 kg, Year of construction: 2026, Equipment: UVV, additional headlights, adjustable chassis, cabin, hydraulics, rubber tracks, Wacker Neuson ET 16 Mini Excavator – Edition A NEW Wacker Neuson Mini Excavator ET 16 – Edition A NEW | Operator’s Cab | Digging Depth 2,413 mm (long dipper arm) | Telescopic Undercarriage 990 mm | Flat-faced Couplers | Work Lights Front & Rear | Incl. Bucket Package & MS-01 Mechanical Quick Coupler Technical Specifications: Manufacturer: Wacker Neuson Model: ET 16 – Edition A Condition: NEW Bdedpfjzh Hb Iox Af Ajh Cab: Operator’s cab Digging depth: 2,413 mm (long dipper arm) Undercarriage: Telescopic undercarriage – width 990 mm Couplers: Flat-faced couplers Lighting: Work lights front & rear Quick coupler: Mechanical MS-01 Bucket package: 300 mm & 500 mm trench buckets, 1,040 mm swivel bucket Highlights & Features: - Edition A – high-quality full equipment for professional use - Long dipper arm – digging depth 2,413 mm - Telescopic undercarriage – ideal for narrow access and high stability - Operator’s cab – comfortable operation in all weather conditions - Flat-faced couplers – fast & clean coupling - Working lights front & rear – optimal visibility for every job site Fields of Application: ✓ Landscaping & gardening ✓ Cable & pipeline construction ✓ Fiber optic installation ✓ Construction & civil engineering companies ✓ Municipal use ✓ Agriculture & yard applications Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Germany-wide & international on request Price ex warehouse Maassenstraße 91, D-46514 Schermbeck (district of Wesel) All information subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Further variants available! ➡️ New & used machines, attachments, and spare parts Buy Wacker Neuson Mini Excavator | ET 16 Edition A | Mini excavator with increased digging depth & telescopic undercarriage | Set incl. MS-01 & bucket package | Wacker Neuson quality Your reliable partner for construction machinery: Claudio Macagnino Baumaschinen & Commercial Vehicles Trading GmbH ➡️ Enquire now & secure immediately available new equipment! If required, we are happy to arrange a virtual inspection of the machine via video call.