Used Column-Type Spot Welder for sale (42,519)

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW Dcodpfx Aszwg Nkeptel total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m The machine is equipped with angle milling heads for large engine machining. + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and misc.tools the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Year of construction: 2018, condition: used, x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg Dsdpfxjhx R Dvj Aptscl total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW Dodpfxowa Dx Rj Aptjcl max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply Dcsdpfx Ajzx D Tcoptsl The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 2259, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,900 mm, rotational speed (max.): 24,000 rpm, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 3,500 mm Travel Z-axis: 1,900 mm B-axis: +/- 110° C-axis: 360° Spindle speed: 24,000 rpm Spindle taper: HSK 63 Spindle motor: 25 kW Table size: 6,000 mm x 2,500 mm (hole pattern 22H7 / M16) Feedrate X + Y: 30,000 mm/min Feedrate Z: 28,000 mm/min Rapid traverse: 30,000 mm/min MACHINE DETAILS Dedpfx Apsyv A Dkotscl Control: Siemens 840D Tool changer: 40 tools EQUIPMENT Spindle: Fischer (type MFWS 1709/30, 2 units) Milling head: Forest Line (type: fork head, B-axis swivels +/- 110°, C-axis rotates 360°) Richter chip conveyor (scraper conveyor) Blum tool measurement Parking station for milling head (2 units)

Condition: used, Year of construction: 2008, throat depth: 680 mm, nominal power at 50% duty cycle: 45 kVA, input voltage: 400 V, Combined roll seam and spot welding machine, type UN63 - Roll seam welding - Rated voltage 400V/50Hz - Rated power 45kVA - Welding current 15kA - Fuse rating 125A - Overhang 670mm - Upper roller diameter 175mm - Lower roller diameter 120mm - Arm distance 350mm - Electrode force 500daN - Stroke approx. 30mm - TE500 control unit with 99 welding programs, parameters for each program, digital current display after each weld, current monitoring, stepper function, Language selection: German, English, Italian, French, etc., with operating manual - 2-stage foot switch according to UVV standards Dsdpfxozh Izcs Aptjcl - Machine main switch - Pneumatic maintenance unit - Weight approx. 680kg - Documentation with circuit diagram, compressed air diagram, and cooling water circuit - VAT can be shown separately - Spot welding fixture / electrode holder and lower arm available at an extra cost. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment. On-site commissioning is subject to a fee, billed according to actual effort.

Condition: used, Year of construction: 2010, machine/vehicle number: 1008801, The machine is designed for electro-resistance spot welding of gabion mesh panels. It can also be used for welding a new type of mesh; in this case, the welding points are reprogrammed. Wire diameter: 3-6mm Maximum mesh dimensions: approx. 2x2 m Operation of the welding machine is semi-automated. Wires are manually inserted on one side of the machine. After automatic welding, the finished mesh is manually removed, and new wires are inserted. Power supply: 400 V AC Machine dimensions: approx. 10.5 x 3 m Location: In our workshop Dsdpjzy Eq Sjfx Aptocl

Condition: good (used), 1 x Syspal column lifter type 600/scb-1480 for 200 and 300 litre eurobins. Located Wiltshire. UKFM1- 6623 Dsdovq N Duspfx Aptecl

Condition: new, Year of construction: 2005, functionality: fully functional, Description Manufacturer: Amada Miyachi Type: STA-100A Model Number: 1-1-BAKA -AEA-01 Serial Number: 17010009 Condition: Used, New AC Resistance Weld Control Easy to use programming interface For controlling and integrating projection welders, press welders, multi-gun machines, portable welding guns, seam welders, robotic systems, swing-arm welders and other special purpose machines. Examples: Consumer Appliances Nuts and Studs Projection Welding Electronics and Automotive Parts Aerospace Parts Office Furniture Automotive Sheet Metal Input Power: 230-460 VAC Output Range: 1000-80,000 A Phase: Single Welding Period Range: 0-99 Description Manufacturer: Amada Miyachi Type: STA-100A Model Number: 1-1-BAKA -AEA-01 Serial Number: 17010009 Condition: Used, New AC Resistance Welding Controller Easy to use programming interface Used to control and integrate projection welders, press welders, multi-gun machines, portable welding guns, seam welders, robotic systems, swing-arm welders and other special purpose machines. Examples: Dcjdpfx Aswcax Eoptol Consumer appliances Nuts and studs projection welding Electronic and automotive components Aerospace components Office furniture Automotive sheet metal Input power: 230-460 VAC Output range: 1000-80,000 A Phase: single Welding period Range: 0-99

Condition: new, new ! all stainless steel with 160 mm-head 40 kW Capacity: ± 2.500 kg/h grinder for fresh and frozen meat: 0°C to -8°C dimensions (l x w x h) : 3.000 x 2.000 x 2.000 mm + Loader for eurobins + Tool trolley for 160 mm grinder Dedszx Uy Tjpfx Aptecl The automatic cross-feed meat grinder is a robust and versatile machine, designed for the efficient processing of both fresh and frozen meat down to -8 °C, as well as other food products. Thanks to its integrated angular feed system, the product is delivered evenly and in a controlled manner, resulting in consistent and high-quality grinding. The machine is constructed entirely from stainless steel, including the cutting worm, feeding worm, and worm housing, ensuring optimal hygiene, durability, and easy cleaning. Operation is controlled via an electronic control panel, allowing the user to select between two speeds for both the feeding worm and the cutting worm. Combined with various knife configurations, this enables a wide range of cuts, from coarse to ultra-fine grinding. For operator safety, the grinder is equipped with an observation platform that automatically stops the machine when opened, as well as a safety rail around the feeding area that immediately halts operation upon contact. Optionally, the grinder can be fitted with a loading system for 200-liter standard meat carts. This system is available in two versions: a column-type or a hydraulic side-loading variant, depending on the specific needs of the user.

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Dsdpfx Ajuv Hrdsptscl Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition Dcsdpfx Apod Swtajtel

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Dcjdpsh N Sd Ujfx Aptsl Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 - weight approximately 330kg Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: used, MIG/MAG pulsed gas shielded welding machine FRONIUS, Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Power: 330 amps = 50% duty cycle 300 amps = 60% duty cycle Djdeyxy Tbjpfx Aptjcl 210 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 50 volts Open-circuit voltage: approx. 30 volts Mains connection: 400 volts, 50 Hz, 32 amps, plug - Digital display for voltage and current - Pulse function - Various welding programs can be selected Welding processes: MIG/MAG/TIG (program and manual operation) 2-cycle, 4-cycle, 4-cycle special and spot welding - Separate 4-roller wire feeder FRONIUS, Type VR 152, with connecting hose package approx. 1.5 meters - 4 meter hose package NEW, with central connection FRONIUS - External FRONIUS water cooling unit, Type FK 71 - Welding gas pressure regulator NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration The unit is also suitable for TIG and electrode welding. Additional equipment for TIG and electrode welding is not included in the scope of supply.

Condition: new, Year of construction: 2025, power: 7.5 kW (10.20 HP), cutting height (max.): 700 mm, cutting width (max.): 1,100 mm, cutting speed: 80 mm/min, warranty duration: 24 months, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS MECHANICAL - 12 MONTHS ELECTRICAL ROUND MAXIMUM DIAMETER: 700MM RECTANGULAR MAXIMUM DIAMETER: 700X1100MM SQUARE MAXIMUM DIAMETER: 700X700MM STANDARD MOTOR DRIVEN TABLE COLUMN TYPE Dodpfx Aovzh Dueptscl SEMI-AUTOMATIC VARIABLE SPEED CONTROL PRECISION HEAD LANDING SYSTEM ASK FOR A QUOTE FOR MORE DETAILS.

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Dcjdpeunia Hofx Aptsl

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 150 t, stroke length: 125 mm, table width: 660 mm, table length: 920 mm, throat depth: 320 mm, ram plate width: 290 mm, ram plate length: 600 mm, total length: 1,600 mm, total width: 2,280 mm, total height: 2,750 mm, overall weight: 7,100 kg, Equipment: CE marking, documentation/manual, safety light barrier, CRONOSSTECH CECP 150 | 150 Ton C-Type Eccentric Press | Heavy Industry Sheet Metal Cutting and Forming Machine From CRONOSSTECH, Turkey's reliable press machine manufacturer: a 100% CE certified 150 Ton C-Type Eccentric Press for cutting, punching, and heavy cold forming operations on thick sheets. With its reinforced, rigid steel frame, it offers industrial solutions with minimal deflection, maximum work safety, and flawless stroke accuracy in heavy-duty industrial production lines. Key Advantages for Your Industrial Production: High Durability and Repeatability: Perfect part quality and long die life thanks to its steel construction that remains stable during heavy-tonnage strokes. Maximum Work Safety: Operator safety-focused design with beam barrier, double-coil safety valve, and mechanical fuse. Low Maintenance Costs: Continuous and trouble-free operation thanks to the central, fully automatic grease lubrication system. Smart Control (Standard): Fast recipe management and commissioning with advanced PLC infrastructure and the Touchscreen LCD display offered as standard. Application Areas: Cutting, punching, and blanking operations on thick sheets Cold shearing and heavy metal forming applications Automotive, white goods, and heavy industry production lines ✅ STANDARD EQUIPMENT Steel construction, rigid frame structure Guide system with bearings on 4 surfaces Spheroidal cast iron connecting rod and bearing housings 4140 heat-treated steel crankshaft and transmission shafts Pneumatic clutch and brake combination Touchscreen LCD display and PLC control system Manually adjustable stroke and mechanical fuse Dual hand/foot control system Emergency reverse motor movement Full compliance with CE standards and occupational safety regulations ✅ OPTIONAL FEATURES Anti-vibration industrial pads Hydraulic fuse system Spare table Roll sheet uncoiler, driver, and straightener integration 8-bearing slide system Project-specific 1 set of die design and production ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton | Motor Power: 15 kW (1450 rpm) | Stroke Rate: 42 strokes/min Table Size: 660×920 mm | Ram Size: 600×290 mm Throat Depth: 320 mm | Stroke Adjustment: 10–125 mm Ram Adjustment: 120 mm | Table Hole Diameter: Ø220 mm Table-Ram Distance: 500 mm | Slide-Table Distance: 540 mm Distance Between Columns: 500 mm | Floor-to-Table Height: 805 mm Die Clamping Slot Diameter: Ø55 mm Front / Side Anchorage Dimensions: 840 mm / 1300 mm External Dimensions (W x D x H): 1600 x 2280 x 2750 mm Approximate Weight: 7100 kg (Note: Please inform us if you have any technical modification requests specific to your production line.) Dodpozwt Nwsfx Aptjcl ✅ MANUFACTURER'S GUARANTEE This machine is manufactured in Turkey with CRONOSSTECH engineering. Global exports, commissioning, and all post-sales technical support processes are directly managed by our expert team.

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,200 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and stamping, powered through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structure. CRONOSSTECH CEHP-TB-250 – H-Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its mono-block frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance under continuous production conditions. Key Advantages: - Stable operation with large dies enabled by the 1200×1000 mm table size - Die/equipment protection via hydraulic overload protection - Controlled and user-friendly operation with PLC + touch screen - High operator safety with light curtain (photoelectric guard) - Low maintenance requirement thanks to automatic lubrication system Application Areas: - Punching / cutting / stamping operations - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes Dcodpfxox N Sc Ae Aptsl ✅ STANDARD FEATURES • Welded steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balanced piston in ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain (photoelectric guard) • Enclosed gear group in lubricating oil bath • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety door in front of the bed • Custom die specifications available ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table–ram distance: 500 mm Clearance between columns: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimensions: 1200×1000 mm Ram face size: 1200×1000 mm Stroke (fixed): 200 mm Motor power: 37 kW Weight: 31,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are handled directly by CRONOSSTECH.

Condition: used, Year of construction: 2005, machine/vehicle number: 55501133, This ABB spot welding cell is being auctioned off online in our industrial auction / machine auction follow-up auction, J&S GmbH Automotive Technology - Machine Park. Dcodezyfz Rjpfx Aptol You can find this and many other items on our platform.

Condition: used, Year of construction: 1972, spindle diameter 100 mm x-travel 1400 mm dismantled ja tool adaptor SK 50 digital ja weight of the machine ca. 14 t Dcsdpfozycrgox Aptsl

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm Dcjdpsxak D Rofx Aptel - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system Djdpfjxak Hxex Aptscl

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Dodjxak H Eopfx Aptjcl Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9220212, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,000 rpm, workpiece weight (max.): 4,000 kg, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm B-axis rotation: 360° C-axis rotation: 360° Spindle speed range: 40 – 2,000 rpm Tool holder: ISO 50 Main spindle power: 15 kW Number of axes: 3 Table length: 3,500 mm Table width: 800 mm Maximum workpiece weight: 4,000 kg MACHINE DETAILS Control system: Conventional Model: Bed milling machine with traversing table Dimensions & Weight Dimensions (L x W x H): 5,300 x 3,000 x 2,700 mm Shipping weight: 11,000 kg Number of shipping packages: 1 EQUIPMENT Dedpfx Apszza U Ietecl Digital display: Sony 3-A

Condition: new, Year of construction: 2026, Heavy-duty design for the entire machine High running smoothness thanks to a new spindle design Industrial motor Separate emergency stop switch Drill depth stop LED machine light integrated into the drill head Precisely machined, stable drill table with diagonally arranged T-slots and an all-around coolant channel Drill table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Precision spindle bore Machine control and safety electronics in 24 V DC Guaranteed concentricity accuracy ≤ 0.02 mm measured in the drill spindle Thick-walled steel column for high force absorption and stability Massive, generously sized base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/Depth approx. 485 mm Height approx. 2040 mm Djdpfxog Uaiuj Aptjcl Weight approx. 162 kg Drilling capacity Drilling capacity in steel (S235JR) 30 mm Continuous drilling capacity in steel (S235JR) 25 mm Drill table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slot size 14 mm Number of T-slots 2 Rotation 360° Tilt 45° Distance spindle - drill table max. 784 mm Speed range Speed range 120 – 1810 min⁻¹ Number of speed ranges 9 Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slot size 16 mm Number of T-slots 2 Spindle Quill stroke 125 mm Spindle mount MK 4 Overhang 270 mm Location: In stock at warehouse 54634 Bitburg - immediately available -