Used Danfoss Bb230As for sale (184)

Condition: new, Sauer Danfoss 111.25.171.0A SNP3NN/033LN01FA P1F6F5NNNN/NNNNN gear pump, unused, 100% functional, scope of delivery as shown in the photos. Ljdpfxjzh Sb Hs Apdjag

Condition: new, Danfoss 111.25.171.0A P1F6F5NNNN/NNNNN SNP3NN/033LN01FA, unused, 100% functional, scope of delivery as shown in the photos. Lodpjzh Sbyefx Apdjag

Condition: good (used), Danfoss VLT6042HT 178B2014, 4C20STR3D0F00A00C0, 52.5 kVA frequency converter Danfoss VLT6042HT 178B2014 4C20STR3D0F00A00C0 Tested 52,5 kVA Shipping with forwarding agency Lajdpfx Asivd Naopdjg More articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Laodpszba Nyofx Apdsg Inspection is possible by appointment!

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data Lodpfx Apjzzz N Hedjag - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: used, Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch, pressure switch, low pressure switch, pressostat -Manufacturer: Danfoss, pressure switch unused in original packaging Lsdpfsqlguksx Apdsag -Type: KP 17B Item number: 060-1268 -Control range: -0.2 - 7.5 bar -Quantity: 1x pressure switch available -Price per piece -Dimensions box: 130/140/H50 mm -Weight: 0.5 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Laodpfx Apozudabjdsg Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: used, Year of construction: 2017, gearing type: other, first registration: 01/2017, color: black, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Available: 5 units! Laodpfx Aekt Nkgepdsg Sauer-Danfoss SPV2/089-R6Z-PS183-CXX-B1 mixing hydraulic pump! Includes mounting frame, filter, and cooler from Agro-Hytos! Direct mounting to the engine PTO! Removed from a Daimler-Benz Arocs 3343 S 6x4 with rear engine PTO, flange 100, 650 Nm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm - Structure in AISI 304 stainless steel - Polypropylene conveyor belt driven by inverter - 3 Lowara pumps for water circulation - Steam heating with coil and automatic condensate discharge - Multi-stage cooling with spray water - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar - Adjustable cycle time from 55 to 240 minutes If you have any questions or require further information, please do not hesitate to send us a message or call us. Ljdpfx Apjywuzwedoag

Condition: new, Frequency converter Manufacturer: Danfoss Typ: VLT Automation drive FC 302 FC-302P7K5T5E20H1XGXXXXSXXXXAXBXCXXXXDX (P7K5) 7.5 KW / 10 HP, three Phasen Lsdpfx Ashukxuspdsag 380 - 500 VAC, (E20) IP20 / Chassis

Condition: new, Frequency converter Lajdpjhukxxjfx Apdog Manufacturer: Danfoss FC-302P2K2T5E20H1XGXXXXSXXXXAXBXCXXXXDX Typ: VLT® AutomationDrive FC-302 (P2K2) 2.2 KW / 3.0 HP, Three phase 380 - 500 VAC, (E20) IP20 / Chassis

Condition: excellent (used), Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Danfoss, thermostat temperature switch, unused, original packaging -Type: RT 107 17-1566 -Temperature range: 70 to 150 °C -Quantity: 4 thermostats available -Price: per piece Lajdpfslc Uh Esx Apdog -Package dimensions: 280/130/H75 mm -Weight: 1.2 kg/pc.

Condition: excellent (used), Year of construction: 2007, operating hours: 41,759 h, functionality: fully functional, machine/vehicle number: NH502GC0313, Equipment: chip conveyor, documentation/manual, CNC controller: MSX-701iA Axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 B-axis travel degrees: 360º (indexing 1º) Number of pallets: 2 Table dimensions mm: 500x500 Spindle Spindle speed rpm: 14,000 Tooling system Tool holder: BT40 Number of tool positions: 120 (60+60) Laedpezyfyyefx Apdog Equipment Chip conveyor Warning light Knoll system, 750 liters Internal coolant supply

Year of construction: 2001, condition: excellent (used), functionality: limited functionality, Used Paragon Cox H55 hydraulic lifting and driving vacuum double shaft mixer, disperser for sale The contact parts of the mixer are made of stainless steel With complete hydraulic system Without control cabinet. Manufacturer Cox Paragon Year of manufacture 2001. Lajdpfxozzknlo Apdog The contact parts of the mixer are made of stainless steel 1 pc 800mm dia 3 blade adjustable butterfly mixer max 400rpm SAI GM4-1000 D40J 100kw hydraulic piston motor 1 pc high speed dispersing mixing head ca: 1000rpm Sauer-Danfoss MMF046C 45kw axial piston hydraulic motor Hydraulic power unit main motor 55 kw 1440rpm 400/660volt 2 pcs 480 liter mixing vessel + 4 pcs stainless dosing rings + hydraulic press head. The mixer can be raised hydraulically by approx. 120 cm

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). Lasdpfx Apjyb Rpdedsg The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor -Manufacturer: Danfoss, hydraulic motor with gearbox -Hydraulic motor: Danfoss Type: OMP 50 151-0028 6 -Gearbox: Nord SK 01 FF i= 5.83 -Hole spacing: 106 x Ø13 mm -Shaft: Ø20 x 40 mm -Bolt circle: Ø 100 x 7 mm Lsdpfxowldups Apdoag -Dimensions: 310/140/H180 mm -Weight: 13.5 kg

Condition: new, Frequency converter Manufacturer: Danfoss Typ: VLT Automation drive Model code: FC302P1K5T5E20H1XGXXXXSXXXXA0BXCXXXXD0 (P1K5) 1.5 KW / 2.0 HP, Three phase Lasdpfjhukxqex Apdsg 380 - 500 VAC, (E20) IP20 / Chassis

Year of construction: 2004, condition: used, functionality: fully functional, maximum load weight: 125 kg, loading space volume: 2.5 m³, machine/vehicle number: 3881 and 3690, Lot of 2 – TUPESA SC 125 V Industrial Steam Tumble Dryers (2004) Two High-Capacity Steam-Heated Tilting Drum Dryers An excellent opportunity to acquire two heavy-duty TUPESA SC 125 V industrial steam tumble dryers manufactured by TUPESA Maquinaria Textil, Spain. These industrial dryers are designed for continuous, high-capacity textile and garment drying, making them ideal for denim manufacturing, garment finishing, industrial laundries, and textile processing plants. Both units were previously installed in the MASI Jeans factory and formed part of a professional industrial laundry and finishing line. The machines are sold together as one lot. Unit K550 is operational. Unit K551 requires radiator replacement Technical Specifications • Manufacturer: TUPESA Maquinaria Textil • Model: SC 125 V • Machine Type: Industrial Steam-Heated Tilting Drum Tumble Dryer • Quantity: 2 Machines • Year of Manufacture: 2004 • Manufacturing Date: 17.12.2004 • Country of Manufacture: Spain • Power Supply: 380 V, 3-Phase, 50 Hz • Heating System: External Steam Supply • Variable Speed Drive: Danfoss VLT 2800 Inverter • Drum Type: Hydraulic Tilting Drum Machine Details Unit K550 • Internal Reference: K550 • Serial Number: 3881 • Operational Unit K551 • Internal Reference: K551 • Serial Number: 3690 • Requires inspection / suitable for spare parts or refurbishment Key Features • Two industrial steam-heated tumble dryers • Large-capacity tilting drum design • Hydraulic drum tilting for ergonomic loading and unloading • Steam-heated drying system • Danfoss variable-speed inverter drive • Industrial electrical control panel • Heavy-duty construction for continuous production • Designed for large-scale laundry and garment processing Includes • 2 × TUPESA SC 125 V tumble dryers • Danfoss inverter drives • Electrical control cabinets • Main drive motors • Steam connection valves • Exhaust fan assemblies • Industrial support frames Applications • Industrial laundry operations • Garment manufacturing • Denim production • Textile processing • Garment finishing • Commercial drying facilities • Heavy textile processing Condition • Sold as one lot consisting of two machines • One machine fully operational • Second machine requires approx.. 1000 euro radiator replacement. • Previously used in professional industrial production • Both machines are externally complete • Good overall industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling and lifting equipment are recommended due to the size and weight of the machines. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. Lsdpfxjzkv R Dj Apdsag The machines are available as this two-machine package or together with the complete industrial laundry and finishing line.

Condition: used, mileage: 3,49,714 km, power: 265 kW (360.30 HP), first registration: 10/2010, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: semi-automatic, emission class: euro5, total width: 2,550 mm, total height: 3,600 mm, loading space volume: 6 m³, loading space length: 4,200 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, crane, soot filter, * Cab * Standard driver's air suspension seat * MB Truck Line CD radio * On-board computer with multi-function steering wheel * Bluetooth hands-free system * CB radio * Air conditioning * Central locking ----* Sun visor * H7 headlights Laedpfxjzb Auls Apdsg * Fog lights * Rotating beacon ----* Diesel engine V6, LA, 265 kW Euro 5 * Transmission G 210-16/14.2-083 * Transfer case VG2400-3W, 2-speed * Auxiliary drive MB131-2c, front PTO shaft ----* Drum brakes * Telligent II automatic transmission * Cruise control * All-wheel drive, switchable * Differential locks * Engine brake with constant throttle * Electronic immobilizer * Ringfeder coupling head for semi-trailer 4040G150 ----*FASSI F95A.22 (F105AXP.22) loading crane, year of manufacture 2010* max. 4750 kg lifting capacity at 2.0 m * max. 1205 kg lifting capacity at 7.9 m * 2 hydraulic outriggers, support width 3.93 m * Telescopic boom and knuckle boom * Electronic overload protection system * FX system (FASSI Electronic Control System) * Emergency stop * Separate hydraulic tank (60 liters) * Multi-Power-Extension System (MPES) * Sequence-independent extension system * Ground control with 2 hydraulic extensions * HBC radio remote control with remote control and 6 functions * DANFOSS S800 proportional control unit with 6 functions and overload protection system * LMB II load moment limiter for 2 working ranges * Electro-hydraulic swivel limit 210° ----*F.X. MEILLER three-way tipper, type 9, year of manufacture 2010* F.X. MEILLER hydraulic system * 8 lashing points in the floor * Rear underrun protection * Access to tipper platform ----* Tire dimension front axle: 315/80R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 300 liters * AdBlue tank: 75 liters * Technically permissible total weight: 20500 kg * Tare weight: 11450 kg * Permissible trailer load: 24000 kg * Overall length: 7810 mm * Wheelbase: 3900 mm * Next inspection due: 03/2026 ----Vehicle number: 12168----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicleTÜV/SP inspectionComplete export processingAssistance with financingApplication for export license platesVehicle transportRegistration of vehiclesRecovery and vehicle transport----YOUR VTS TEAM

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Lodpfx Apszmkxhsdsag Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: new, Frequency converter Manufacturer: Danfoss Typ: VLT Automation Drive - FC-302P1K5T5E20H1 Lajdpfxshqhx Tj Apdeg Max. Power: 1,5 kW Input: 3x380-500V, 50/60 HZ, 3.7/3.1 A Output: 0-100 HZ, 4.1/3.4 A

Condition: new, Frequency converter VLT Automation Drive Manufacturer: Danfoss Typ: FC-302P3K0T5E20H1B Lajdpfx Apjhqh Hpjdsg Input: 3x380-500 V, 50/60HZ, 6.5/5.7A Output: 0-590HZ, 7.2/6.3A

Condition: used, Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Danfoss, thermostat temperature switch unused in original packaging -Type: KP 77 060L1121 -Temperature range: 20 to 60°C Lodoqlgu Sspfx Apdsag -Quantity: 1 thermostat available -Dimensions box: 140/130/H50 mm -Weight: 0.5 kg

Condition: used, Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch, pressure switch, low pressure switch, pressostat -Manufacturer: Danfoss, pressure switch unused in original packaging -Type: KP 1W -Diff.: 0.7 bar -Quantity: 1x pressure switch available -Price per piece -Dimensions box: 190/140/H45 mm -Weight: 0.4 kg Laedpfxoqlgu Do Apdeg

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: N365 OMP 200 151-0615 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 2x aggregate available -Price: per piece -Dimensions: 210/130/H120 mm Lsdpfx Apjxl Rzgedjag -Weight: 7.1 kg/piece