Used Danfoss Compound Controller for sale (45,707)

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. Itsdpfxezudabs Agpek The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: excellent (used), I am offering for sale an Agilent Technologies Systems Controller, model 86030-30011. This is an industrial computer designed to work with Agilent's measuring and laboratory equipment. The device is housed in a robust, rack-mountable metal enclosure. Inside, there is a PC equipped with, among other things, a CD-ROM drive and a 3.5" floppy disk drive. Numerous communication ports are available on the rear, allowing it to interface with laboratory devices. Technical specifications: Manufacturer: Agilent Technologies Model: 86030-30011 Serial number: 50860C05 Power supply: 115/230 V AC Frequency: 50/60 Hz Current consumption: 10 A / 5 A Year of manufacture: 2009 (according to the nameplate) Connectors: LAN (RJ-45) VGA PS/2 (keyboard and mouse) COM (RS-232) LPT DAS 1800 interface Additional industrial/specialized connectors Visual condition: Normal signs of use in the form of minor scratches and dirt on the enclosure. The inside of the device appears to be complete. There is a sticker indicating an electrical inspection performed in 2014. Sold without any additional accessories, cables, or software. Included: Itjdpfx Aszl Hz Asgpsk Agilent Technologies 86030-30011 Controller – exactly as shown in the pictures.

Condition: new, functionality: fully functional, NEW Danfoss VLT 5027 – Type 175Z4131 1 unit in stock Iedpfjzkiz Nsx Agpjtk We have a wide range of Danfoss frequency converters available, including this model: VLT 5027 175Z4131. We have added a selection of photos to this advertisement. Additionally, you can request extra photos of a specific part. Feel free to send us a message for this. A PDF file has also been added, containing an overview of all Danfoss parts that we currently have in stock. Do you have any questions, or are you looking for a specific Danfoss part? Please feel free to contact us. We will be happy to assist you.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Itodpfx Agjycuuyspek Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 21137, tank capacity: 50 l, usable tank capacity: 36 l, input voltage: 230 V, inner dimension width: 280 mm, inner dimension length: 600 mm, COMPLETE ORIGINAL DESCRIPTION IN THE IMAGE GALLERY Mobile Vibratory Finishing Machine EUROTEC TV25-M – Vibratory Deburring System with Noise Protection Itjdpfx Agezktcqopok For sale is a mobile vibratory finishing machine, EUROTEC TV25-M, in a compact design. This machine is ideal for deburring, rounding edges, smoothing, cleaning, and polishing various workpieces. Technical data: Manufacturer: EUROTEC Innovation Model: TV25-M (TV25 compact) Mobile vibratory finishing machine with complete noise protection enclosure Gross volume: approx. 50 liters Net volume: approx. 36 liters Connected power: 0.5 kW Operation via 230 V (Plug & Play) Working container: approx. 600 × 280 mm Electronic control with timer Frequency converter integrated Integrated process water treatment Process water feed pump 3-stage process water cascade (70 liters) Automatic shutdown after processing time expires Highly wear-resistant polyurethane lining Integrated scraping edge Very quiet operation due to complete noise protection enclosure Equipment: - Automatic compound dosing unit (TV25-M ACD5) - Partition module for dividing the working container (TV25 TW-G) for simultaneous processing of multiple batches - 3 stainless steel sieve boxes (TV25-M Skxx) - Various grinding media (ceramic and plastic): more detailed description see images Advantages: - Complete system on a chassis – ready for immediate use - Compact design - Easy operation - Ideal for small and medium-sized series - Uniform and reproducible processing results - Robust industrial quality The machine is in excellent condition and has been used only a few times. It has been used exclusively in a professional setting. New price as of 15.03.2023: €19,885.53 net

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. Itjdpfxszba Nye Agpsk The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm - Structure in AISI 304 stainless steel - Polypropylene conveyor belt driven by inverter - 3 Lowara pumps for water circulation - Steam heating with coil and automatic condensate discharge - Multi-stage cooling with spray water - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar - Adjustable cycle time from 55 to 240 minutes If you have any questions or require further information, please do not hesitate to send us a message or call us. Itsdpfjywuzwjx Agpek

Condition: used, This listing is for a Hirschman Pipetus 100 Rechargeable Pipette Controller The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated color display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Iodpfjxv Ax Sox Agpstk Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: like new (used), Year of construction: 2021, Bainite BM 95 L INTERMESHING rubber internal mixer / available immediately Model: 95 L IM Intensive mixing of various rubbers Rotor type: HP-5 Type Design Tank capacity: 95 liters Dosing opening size: 860mm x 407.7mm Dosage (Kg.): 95 x Sp. Gr. compound x filling factor The filling factor is a function of the viscosity of the compound, the rotor speed and the pressure on the suspended weight. It is a value between 0.65 and 0.90. A typical charge size for a rubber mixture is 95 x 1.15 x 0.65 = approx. 72 kg / charge. Motor power: 420KW, 1000RPM, 415V, 50 Hz AC Motor Rotor speed: 6 to 60 rpm Active cycle time: Continuous Discharge door: Hydraulically operated sluice door in the side of the chamber: Peripherally drilled Floating weight: Hydraulic operation Itedpfxey E I Awe Agpek The mixer: approx. 10t The main motor: approx. 5t The main gearbox: approx. 5t The main control panel: approx. 1.5t

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Travel range of Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Transport packages: 3 EQUIPMENT Itjdpfxjzu Nyae Agpek External cooling Chip conveyor Tool magazine (30 pieces)

Condition: excellent (used), Year of construction: 2012, GILDEMEISTER - CTX 310 eco V3, year of manufacture 2012, spindle hours approx. 8000 hours Turning diameter 210 mm Turning length 580 mm Control system 840 D Siemens Center height 190 mm Turning diameter over the bed 330 mm Turning diameter over the compound slide 260 mm Spindle speed range - main spindle max. 4,000 rpm Drive power - main spindle 10 / 7.5 kW Max. torque 115 / 86 Nm Spindle bore 68.5 mm Usable bar diameter 51 mm C-axis 0.001 ° Travel - x 185 mm Travel - z 455 mm Number of tool positions 12 Tool holder VDI 30 Driven tool stations: 6 Tailstock travel 400 mm Isdpfx Ajzumn Uogpjtk - Chuck including various jaws - 12 VDI 30 tool holders - Driven tools: none - Chip conveyor

Condition: good (used), WALTHER CN 550 PN Trowal + RÖSLER Z300 Turbo Floc Centrifuge -Walther Trowal + Rösler Centrifuge -Coating in good condition -Rotational speed: 1460 RPM -Capacity: 550 liters -Motor: 3.5 kW -Pneumatic soundproofing cover -Control cabinet -SEPARATION UNIT -Dirty water / drainage system -Compound + 2 boxes of sliding stones -Documentation -Dimensions: L x W x H: 2 x 1.8 x 1.8 meters / Weight: 1500 kg RÖSLER Z 300 TURBO FLOC / Centrifuge -Year of manufacture: 1996 -Rotor speed: 3160 RPM Itsdpfx Ageyh Ezlopek -Power: 4 kW -Max. throughput: 800 liters per hour -Documentation -Dimensions: L x W x H: 1.7 x 1 x 1.6 meters / Weight: 450 kg Errors and omissions excepted.

Condition: good (used), Danfoss FC-102P45KT4E20H1XG 45kW/60HP 131F0340, 3x380-480Vfrequency inverter. Item condition: Used 60kg Ijdpopugc Eofx Agpetk Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new and used - you can find in our store! International shipping costs on request!

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Ijdoyb Rpdepfx Agpjtk Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: excellent (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, total length: 5,700 mm, total width: 1,710 mm, total height: 2,780 mm, operating temperature: 95 °C, Equipment: cooling unit, For sale, as new and in a great functional condition A continuous synthesis reactor for organic compounds, based on microwave system, built in ATEX class II norm Sales price 120 000 CHF ex works (built new for 500 000 CHF) Itodpfx Aovy T Ivogpek 3 raw material tanks, 100 L each 2 top entry agitators 1 CIP tank 2 finished product tanks, 50 L each 3 pumps 1 microwave with 2 generators (2450 MHz), 12 kW power output, fully conform to EU safety standards All high quality materials steel 1.4404, PTFE, Duran glass or similar High quality components (tanks, pumps etc), sensors and transducers, made in EU - full list available PLC controlled via 24V DC, with dedicated software Documentation available The UNIT has been now professionally decomissioned and is stored on palettes, ready for pickup. Purchase of selected components (such as tanks or pumps) is also welcome.

Condition: good (used), Year of construction: 2005, functionality: limited functionality, The FICO MMS-12-M is a Manual Molding System for the encapsulation (transfer molding) of semiconductors. It is a mechanically operated machine, primarily used for small series, development, and pilot production. Key specifications: Characteristic | Specification Type | Manual Molding System (MMS) Manufacturer | FICO (now part of Besi) Machine design | Mechanical Loading | Manual placement of lead frames Number of molds | 1 Capacity | 2 lead frames per cycle (12-position configuration) Application | Transfer molding of ICs, transistors, and other semiconductor packages Production | Development, prototypes, and small production runs Meaning of "12-M" According to FICO documentation: MMS = Manual Molding System 12 = machine with one mold suitable for two lead frames. M = mechanical design. Typical features: Manual input of lead frames. Heated transfer mold. Hydraulic or mechanical press for the transfer process (depending on the design). Temperature and process time control. Suitable for epoxy molding compounds (EMC). Developed for laboratories, R&D, and small production quantities. Itodozk Ak Ropfx Agpek

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW Isdjzvnhrjpfx Agpjtk machine in stock.

Condition: like new (used), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, overall weight: 59 kg, input voltage: 230 V, total length: 1,330 mm, total height: 1,028 mm, total width: 568 mm, For sale is a professional, indirect-fired oil-fired heater, APEX model BGO-80B (Type 56217), 80 kW heating capacity, manufactured in 01/2026, complemented by an external 1000-liter fuel tank system with an approved steel spill containment basin (manufacturer Dübi AG) including connecting lines. Application: Heating and drying of halls, workshops, greenhouses, storage rooms, and outdoor areas in the construction and agricultural sectors. Not suitable for closed rooms without ventilation. The unit has an integrated 69-liter tank system but can optionally be connected directly to the supplied external 1000-liter fuel tank system via the existing oil-resistant, reinforced connecting lines (Ø 10 mm, 2 m length). This allows for significantly longer continuous operation without refilling. Buyers who only need the heater can forego the external fuel tank and use the internal 69L tank system. Heater features: Integrated electronic thermostat with digital display (setpoint/actual value setting) Additional external room thermostat with a 10 m connection cable (remote measurement/control) Automatic electronic ignition with flame monitoring Danfoss injection pump, stainless steel combustion chamber with fan cooling External, easily accessible fuel filter Chassis with extra-large wheels and handle Removable exhaust stack (Ø150 mm) for direct connection to an exhaust pipe Technical data of the heater: Parameter Value Model APEX BGO-80B (Type 56217) Heating capacity 80 kW / 68,800 kcal/h Fuel Diesel / heating oil Consumption 7.5 l/h Mains voltage 230V ~ 50Hz Fan motor 900 W Blower capacity 2,000 m³/h Blower outlet diameter 340 mm Flue connection Ø150 mm Tank capacity (internal) 69 l Dimensions (L x W x H) 1330 x 568 x 1028 mm Weight 59 kg Year of manufacture 01/2026 Protection class IPX4 Itsdpfozrwapjx Agpok External fuel tank system (included): Plastic tank, 1000 liters, with level indicator Steel spill containment basin "Dübi", 100% retention volume, EAGS certificate, manufacturer's serial number 199890 2x connecting lines, Ø10 mm, 2 m, oil-resistant/reinforced (compatible with internal or external tank) Total scope of delivery: 1x APEX oil-fired heater 80 kW with thermostat, digital display, and exhaust stack 1x external room thermostat including 10 m connection cable 1x 1000L fuel tank system with steel spill containment basin 2x connecting lines Ø10mm, 2m Condition: Well-maintained, very little use (approx. 200 operating hours), fully functional. Location: 6064 Kerns, Obwalden

Condition: used, Year of construction: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH Signs of use present • Hardened and ground Z-axis guideway • Spindle mount: Camlock DIN ISO 702-2 No. 8 • Precisely machined carriage • Handwheels with adjustable fine graduation 0.04 / 0.02 mm • All guides adjustable via gib strips • Shafts, gears, and main spindle running in oil bath • Compound slide adjustment range ± 90° • Guaranteed spindle nose runout accuracy better than 0.015 mm • Gear wheels move smoothly, hardened and ground, mounted with 2 adjustable precision tapered roller bearings • Clearly arranged selector levers for feed speed selection • Enclosed rapid-shift feed gearbox design • Gears and shafts hardened and ground, running in oil bath on precision bearings • Switches with lifecycle calculation, tested according to EN ISO 13849 • Bed carriage with reversible operation via shift spindle • Centralized lubrication on bed carriage • Leadscrew cover • Emergency stop pushbutton, motor protection switch, lockable main switch • Tailstock quill and handwheel with adjustable fine graduation 0.025 mm • Fast, simple, tool-free adjustment via clamping lever • Heavily ribbed prism bed, inductively hardened and precision-ground from cast iron Itedpsx Dzxajfx Agpjk • Coolant system with separate coolant tank, fill level indicator and oil separator; easy and complete draining and cleaning according to DIN • LED machine lamp in chip guard • Two gearbox stages • Spindle bore / bar capacity Ø 105 mm • Siemens Sinamics frequency converter / Safety Integrated • Drag chain for gentle routing of cables and hoses • Thread dial gauge scale adjustable • Quick-change toolholder SWH 7-C • 1 toolholder 32 x 150 Type D for 25 mm square tool bits • Digital position display DPA 21 • Glass scales Dimensions and Weight Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Range Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total power rating: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System Coolant pump capacity: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. toolholder seat height: 25 mm Spindle taper: Ø 113 (Taper 1:20) mm Metric thread pitches: 0.1–14 mm/rev Number of metric threads: 47 Imperial thread pitches: 112–2 TPI Number of imperial threads: 60 Diametral pitch: 4–112 DPI Number of diametral pitch threads: 50 Module threads: 0.1–7 mm/rev Number of module threads: 34 Compound slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Longitudinal feed range: 0.031–1.7 mm/rev Number of longitudinal feeds: 42 Face feed range: 0.014–0.784 mm/rev Number of face feeds: 42

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LD Capacity 800 kg/h depening material specifications Drive from 197 kW up to 350 kW possible , optional by appoinment L/D 34 - 40 LD , by appointment > due to your material formula needs drive up to 230 kW - 350 kw optional against add.price 1x venting port new control board optional - equipment against additional price: Isdpsc Rukwjfx Agpotk screen-pack-changer pelletizing material feeding , loss-in-weight gravimetrci blenders pellet-classifier and more Please inform which equipment you need for a detailled quotation, thank you. All ex stock available

Condition: excellent (used), Conventional lead and feed screw lathe from manufacturer Nardini S.A. Máquinas e Ferramentas, model ND 220 SE. Well-maintained machine in technically flawless condition. Technical Data: Itjdpfx Aoypcpxogpok Machine type: Lead and feed screw lathe Manufacturer: Nardini Model: ND 220 SE Control: Conventional Center height: 220 mm Distance between centers: 1,000 / 1,500 mm Swing over bed: 440 mm Swing over cross slide: 270 mm Swing in gap: 630 mm Gap length in front of faceplate: 200 mm Spindle Spindle nose with short taper size 6, DIN 55027 Spindle bore: 52 mm Internal taper: 1:20 Reducer bush: MT 4 18 spindle speeds: 25 – 2,000 rpm Feed and thread range 132 longitudinal feeds: 0.057 – 2.645 mm/rev 132 cross feeds: 0.028 – 1.322 mm/rev 54 metric threads 54 Whitworth threads 54 module threads 54 diametral pitch threads Leadscrew pitch: 6 mm Carriage & Compound Cross slide travel: 250 mm Top slide travel: 125 mm Max turning tool section: 20 × 20 mm Top slide swivel range: ± 45° Tailstock Quill diameter: 60 mm Internal taper: MT 4 Quill stroke: 200 mm Lateral offset: 15 mm Drive Main motor: 3-phase 380 V / 50 Hz, pole-reversible, 3 / 6 kW Coolant pump: 0.09 kW Operational Advantages - Robust machine bed - Very large feed and thread range - Suitable for both single-part and series production - Easy operation - Durable industrial quality Used machine Technically tested Fully functional Ready for immediate use Delivery time: Immediate Ex-works, loaded free of charge Loading: Forklift available Transport / shipping: can be arranged

Year of construction: 2004, condition: used, functionality: fully functional, maximum load weight: 125 kg, loading space volume: 2.5 m³, machine/vehicle number: 3881 and 3690, Lot of 2 – TUPESA SC 125 V Industrial Steam Tumble Dryers (2004) Two High-Capacity Steam-Heated Tilting Drum Dryers An excellent opportunity to acquire two heavy-duty TUPESA SC 125 V industrial steam tumble dryers manufactured by TUPESA Maquinaria Textil, Spain. These industrial dryers are designed for continuous, high-capacity textile and garment drying, making them ideal for denim manufacturing, garment finishing, industrial laundries, and textile processing plants. Both units were previously installed in the MASI Jeans factory and formed part of a professional industrial laundry and finishing line. The machines are sold together as one lot. Unit K550 is operational. Unit K551 requires radiator replacement Technical Specifications • Manufacturer: TUPESA Maquinaria Textil • Model: SC 125 V • Machine Type: Industrial Steam-Heated Tilting Drum Tumble Dryer • Quantity: 2 Machines • Year of Manufacture: 2004 • Manufacturing Date: 17.12.2004 • Country of Manufacture: Spain • Power Supply: 380 V, 3-Phase, 50 Hz • Heating System: External Steam Supply • Variable Speed Drive: Danfoss VLT 2800 Inverter • Drum Type: Hydraulic Tilting Drum Machine Details Unit K550 • Internal Reference: K550 • Serial Number: 3881 • Operational Unit K551 • Internal Reference: K551 • Serial Number: 3690 • Requires inspection / suitable for spare parts or refurbishment Key Features • Two industrial steam-heated tumble dryers • Large-capacity tilting drum design • Hydraulic drum tilting for ergonomic loading and unloading • Steam-heated drying system • Danfoss variable-speed inverter drive • Industrial electrical control panel • Heavy-duty construction for continuous production • Designed for large-scale laundry and garment processing Includes • 2 × TUPESA SC 125 V tumble dryers • Danfoss inverter drives • Electrical control cabinets • Main drive motors Itodpfx Agszkv R Dopok • Steam connection valves • Exhaust fan assemblies • Industrial support frames Applications • Industrial laundry operations • Garment manufacturing • Denim production • Textile processing • Garment finishing • Commercial drying facilities • Heavy textile processing Condition • Sold as one lot consisting of two machines • One machine fully operational • Second machine requires approx.. 1000 euro radiator replacement. • Previously used in professional industrial production • Both machines are externally complete • Good overall industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling and lifting equipment are recommended due to the size and weight of the machines. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are available as this two-machine package or together with the complete industrial laundry and finishing line.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: ZE60 A- Econ EUP 600, Stock- No.: 2858 1 used, partly overhauled and tested compounding-pelletizing line, consisting of: Berstorff ( Krauss Maffei ) compounding extruder i Type ZE 60 A - 34 L/D twin-screw co-rotating extruder Extruder drive 160 kW AC Degassing with vacuum pump Laser separating head / melt filter Eprotec Melt x10 melt pump ECON EUP 600 underwater pelletizing system, complete with Start-up polymer diverter valve incl. hydraulic Water system pellet spin-dryer / centrifuge Control boards with Siemens Touch panel >> 12-month PLASTICO warranty OPTIONAL at extra cost: Material conveying Gravimetric loss-in-weight dosing-blending Granule classification Pellet filling station for Big Bags or Octabins Start-up in your factory by our Technicians We have more complete compounding extruders, pelletizing systems, loss-in-weight gravimetric blenders & more in Stock. Iodpfx Agey At N Ropjtk Visit us in D 42329 Wuppertal or send us your inquiry, you´re welcome.

Condition: good (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: RSPL 19, We are selling a robotic long grinding and polishing system. With this system, parts can be ground and polished. - 1 x tool changer on the robot side - 1 x servo-driven table for holding 9 parts, 360-degree rotation, 9 meters in length - 1 x polishing unit 450mm x 600mm, with liquid polishing compound feed - 1 x brushing unit for brushes 400mm x 600mm, with liquid polishing compound feed - 1 x grinding unit for abrasive belts, length 1,000mm and 150mm width, with oil mist device consisting of three low-pressure spray guns - 3 x racks for tools - 1 x truing device for polishing wheels - 1 x measuring plate for polishing unit Itjdpfx Aewdnb Rogpok - 1 x control cabinet with PLC The robot and the linear axis have already been sold. If you have any further questions, please feel free to contact us!

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: Itjdpfx Agoy Tybnspsk -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg