Used Danube Dh-30 Inv for sale (26,057)

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module Iiedpfszubtlsx Ahnsg • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: good (used), Year of construction: 2008, 1 used surface grinding machine Manufacturer: STÖCKEL Type: FX 60/30 SPS Year of manufacture: 2008 Iijdpoz Dkuuefx Ahneg Grinding area: approx. 600 × 300 mm Magnetic chuck: approx. 600 × 250 mm Speed: 1900 rpm Grinding height: 400 mm Drive power: 9 kW Operating voltage: 400 V / 50 Hz Table load: 250 kg Control: PLC Weight: 3000 kg

Condition: good (used), functionality: unexamined, travel distance X-axis: 4,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,700 mm, total length: 12,000 mm, total width: 7,000 mm, table width: 1,000 mm, table length: 4,800 mm, rotary table diameter: 630 mm, overall weight: 25,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, MATEC 30 HV Universal Machining Center Iedpfx Ajzxzf Ajhnsig - Year of manufacture: presumably 2006 - Tool holder: SK 40 - Table with 9 T-slots - Incl. swiveling head: 360° - Incl. chip conveyor, coolant system, and safety fence Please note: the hydraulic clamping systems shown in the photos are not included in the scope of delivery! Please note: the machine can be transported on a standard truck! FCA D-72589 Westerheim - loaded onto a truck

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 24F104, Graco PROMIX 2KE – Demonstration unit, fully functional Isdpfx Ahszwk H Honjig For sale is a used, fully functional Graco PROMIX 2KE, 30:1 pump ratio, IS, AA, from our demonstration stock. Manufacturer: Graco Designation: PROMIX 2KE, 30:1 pump ratio, IS, AA Article No.: 24F104 Condition: used, fully functional, demonstration unit Offered for sale as part of a stock clearance. This is a great opportunity to acquire a proven, little-used Graco system at attractive conditions. We will be happy to assist you with any questions.

Condition: used, mileage: 8,31,933 km, power: 220 kW (299.12 HP), first registration: 09/2010, fuel type: diesel, number of seats: 31, gearing type: automatic, next inspection (TÜV): 08/2026, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Mercedes Benz Citaro NF O530 Bus, 31+57+1 (Vehicle No. 312) First registration: September 27, 2010 831,933 km Engine: 11,967 ccm 220 kW / 352 hp Euro 5 EEV Permissible gross vehicle weight: 18,000 / 20,900 kg Unladen weight: 11,789 kg Payload: 6,211 kg Axle load front: 7,245 / 7,250 kg, axle load rear: 11,500 / 13,000 kg Overall length: 11,950 mm, overall width: 2,550 mm, overall height: 3,400 mm 31+57+1 seats (sitting / standing / wheelchair / stroller) Ramp at the second double door for strollers and wheelchairs Iedpfx Ahszztq Nenoig Air conditioning, heating, auxiliary heater Double door at the front and rear Microwave Fully automatic transmission LAWO Without cash register Radio/CD Electric windows Emergency exit Electric mirrors + mirror heating Malfunction of the level adjustment, various signs of wear and tear, commensurate with age, engine with oil leaks, etc. Not a new vehicle; was in regular service until deregistration. Full air suspension Fully automatic system Tires 275/70R22.5, front approximately 40/40%, rear approximately 40%, front steering axle approximately 30/30% Price: €7,500.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to €5,000.00 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, mileage: 4,83,643 km, first registration: 10/2017, fuel type: diesel, fuel: diesel, Year of construction: 2017, DB Atego 1530 L Tautliner with tail lift, air conditioning, and auxiliary heater • EURO 6C Isdpfx Asyutkwohneig • Leaf / air suspension • Automatic transmission • Air conditioning • Auxiliary heating • ACC / Adaptive cruise control • Emergency braking assistant • Lane keeping assistant • Hill start assist • Differential lock • ASR (traction control) – switchable • Reversing camera • On-board computer • Multifunction steering wheel • Roof hatch • Telephone • Sun visor • Duo-matic air coupling • Roof spoiler • 200-liter aluminum fuel tank • Gross vehicle weight: 15,000 kg • Curb weight: 7,230 kg • Payload: 7,770 kg • RINGFEDER tow hitch – jaw coupling • Towing capacity: 10,500 kg • Vehicle dimensions: 9,050 x 2,550 x 3,850 mm (LxWxH) • Wheelbase: 4,800 mm • Tyres: 285 / 70 R 19.5 on steel rims • Tread depth: 6/6 * 10/10 * 11/11 mm Body: JUNGE Fahrzeugbau • Sliding curtain / Tautliner • Two-part side boards with Kinnegrip • EDSCHA sliding roof system • Internal dimensions: 7,300 x 2,500 x 2,620 mm (LxWxH) • DAUTEL tail lift, type DL 1500 L – upright • 1,500 kg lifting capacity • Wooden floor with lashing rings - German vehicle - New MOT / roadworthiness certificate available on request and at extra cost Errors and prior sale excepted. = Further information = Please contact Joannis Arpantzanis or Kai Bühler for further details.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2022 - Serial number: 5480 - Max. punching force: 30 t Iedoz Aaw Sspfx Ahnoig - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 - Chute door for extraction of parts up to 1000x1500 mm, with part detection Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2020, Nominal output: 29.8 kW Air flow rate: 2400 m³/h Combustion chamber depth: 580 mm Loading door: 330 mm x 330 mm Heatable volume: approx. 600 m³ Heatable area: approx. 120 m² Space requirement: approx. 600 mm x 800 mm x 1900 mm Weight: 230 kg Iedpfxsz A Eapj Ahnjig Flue pipe diameter: 160 mm Warm air outlet nozzle: 2 x 200 mm Operating modes: Automatic and manual Chimney diameter (approximate): 200 mm

Condition: excellent (used), Motan DH-1 N-A/B instantaneous water heater, loadable You are buying a functional Motan instantaneous water heater. The device comes from Bundeswehr stocks and is in very good condition. Versatile in use, e.g. as a pool heater The bestseller for heating swimming pools in no time at all. A 100 m³ swimming pool heats up to 30 C in 3 hours. There is no quicker way to heat water. Perfect for use wherever there is no electricity. Tent camp, weekend house, building site, camping. Its effective output is infinitely variable from 40.5 kW to 128 kW. Despite its high output, the appliance is still portable at a weight of 130 kg. As the water temperature can be set anywhere between 30°C and 90°C, the appliance is can be set as required, the appliance is very versatile, e.g. as a hot water generator for camp showers, for hot water production. Also perfect for koi facilities and koi ponds. Technical data: Output: 35000 kcal/h to 110000 kcal/h infinitely variable (40.5 kW to 128 kW) Largest water volume: approx. 3600 l/h of water at maximum heat output. At max. water flow, the temperature increase is approx. 30°C, i.e. at 10°C. Water flow temp. and 30°C Increase = 40°C Final temperature Drive: Petrol engine Fichtel & Sachs, Stamo 75 Displacement: 75 ccm Power: 2.5 hp at 4500 rpm Iodpfxjulgh Ns Ahneig Consumption: approx. 1.8 l/h mixture 1 : 25 (for the engine!) For the burner depending on the amount of water max.: 24l/h gasoline with max. flow rate of 3600 l/h Tank capacity: 5 liters Dimensions Width: 500 mm, length: 1040 mm, height: 850 mm Weight: approx. 130 kg Manufacturer's price: 8000,-€ You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2012, HAAS ST-30 CNC lathe with C-axis and driven tools Year: 2012 Technical details: Swing diameter 806mm, Maximum cutting diameter 533mm, Distance between centres 762 mm Maximum cutting length 660 mm Bar capacity 76 mm Iodpfozz Agtox Ahneig Spindle Motor 22,4 kW Max spindle speed 3400 rpm C-axis and driven tools Turret 12 positions Tailstock Accessories/options: 1 axial driven tool holder 1 radial driven tool holder 10 pieces static tool holders Tool presetter, Renishaw Foot pedal for chuck and tailstock operating Coolant tank Swarf conveyor Under power in our warehouse.

Condition: excellent (used), functionality: fully functional, Double miter saw OMS INVINCIBLE OK 330 Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Ijdpfx Aoylm Nujhnjig Units adjustable at 45°/-45° Motor power: 2×3HP ~2.2kW Saw blades: 330 mm Pneumatic vertical material clamp

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! Ijdpfjzzlc Rox Ahneig TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 1,750 kg, rotor diameter: 250 mm, rotor length: 600 mm, power: 30 kW (40.79 HP), Pre-shredder: 1 unit Forrec AE 600/30 single-shaft shredder: Iodpfsztaurjx Ahnsig - Drive: 30 kW - Dimensions: 2,250 x 3,050 x 1,600 mm - Rotor diameter: ø 250 mm - Hopper dimensions: 1100 x 1000 mm - Hopper capacity: 750 liters - Production: 600 kg/hour (mixed cables) - Weight: 1,750 kg - 1 set of original Forrec spare parts Accessories: - Electric lift table for material feeding - Conveyor belt for shredded material discharge - Metal platform for material feeding The machine has been disassembled and is in storage. Therefore, a functional test is not possible. Pickup only in 14727 Premnitz.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Iodjzxzagjpfx Ahnjig Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 702563, Year of construction: 2007, operating hours: 7,720 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 2,280 mm, fuel type: gas, mast type: triplex, fork length: 1,190 mm, TECHNICAL DETAILS Lifting capacity: 3,000 kg Lifting height: 6,500 mm Free lift: 2,280 mm Mast height: 3,100 mm Fork length: 1,190 mm Minimum fork width: 250 mm Maximum fork width: 1,100 mm MACHINE DETAILS Mast type: Triplex Iodozxckaspfx Ahnjig Fuel type: LPG Engine manufacturer: Nissan Number of wheels: 4 Dimensions (L x W x H): 2,830 x 1,240 x 3,110 mm Transport packages: 1 piece Operating hours: 7,720 h EQUIPMENT Side shift Work lights Partial cab Documentation CE marking

Condition: good (used), Year of construction: 2004, Universal machining center: Fahrständer / travelling-column Machine type: Matec 30 HV Control: Siemens 840 D Sinumerik Year: 2004 SPECIFICATIONS Travel X-Axis: 2.000 (2 x 750) mm Y-Axis: 600 mm Z-Axis: 800 mm B-Axes: +/- 105° C-Axis Spindle speeds: 15.000 rpm Spindle power: 15 kW Ijdsz Dkr Tepfx Ahnoig Torque: 100 Nm Tool: HSK 63 Tool capacity: 48 NC rotary table: RW/NC-160/250 Equipment Internal cooling: 20 bar cooling system Chip conveyor Caliper separating plate Direct linear scales

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 720 mm, controller model: Mazatrol SmoothG, table width: 820 mm, table length: 3,500 mm, overall weight: 16,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,679 h, spindle motor power: 22,000 W, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, CNC Vertical Machining Center MAZAK VTC-820/30 (Year of Manufacture 2018 / Commissioned 2019) You are welcome to inspect the machine in our factory while it is powered on. If you are interested, we will send you demonstration videos of the machine. The MAZAK VTC-820/30 is a powerful CNC vertical machining center for the precise and efficient machining of large workpieces. With generous travels of 3,000 mm in the X-axis, 820 mm in the Y-axis, and 720 mm in the Z-axis, the machine is particularly suitable for long and complex components in mechanical engineering, mold making, and general metalworking. The sturdy work table, with dimensions of approximately 3,500 × 820 mm, allows for the accommodation of large workpieces. The powerful main spindle, with speeds of up to 12,000 rpm and a drive power of approximately 22 kW, ensures high cutting performance and precision. The CAT 40 (ISO 40) spindle mount ensures broad tool compatibility. The machine is equipped with a modern MAZATROL SmoothG control system, which offers intuitive operation, rapid programming, and high process reliability. The 48-tool changer enables flexible and efficient machining processes, even for complex manufacturing tasks. For optimal production conditions, the machining center features coolant supply through the spindle, a chip conveyor, and a lubricant preparation system. With a machine weight of approximately 16,500 kg, the VTC-820/30 offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile vertical machining center that guarantees high precision, performance, and reliability in industrial manufacturing. You can rely on us – professional, reliable, and with a passion for machines! Iiodjy S Db Aepfx Ahnsg PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter over bed slide: 480 mm, controller model: Siemens 840D, TECHNICAL DETAILS Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm C-axis: yes C-axis speed range: 0–20 rpm Iiedpfx Aozwmztehnog Number of tools: 12 Driven tools: 6 Spindle bore: 103 mm Main spindle head size: 8 MACHINE DETAILS Control system: Siemens 840D Main drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50 % Speed range: 30–3,000 rpm EQUIPMENT Forkardt 3 NHF 315-82 A8 power chuck with centrifugal force compensation and hard, ground-in top jaws Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Maximum bar diameter: 63 mm Including draw tube and mounting for power chuck

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis Isdpezk H A Dsfx Ahnoig • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe • 2 supports, front

Condition: good (used), Year of construction: 1984, operating hours: 5,800 h, Linde H30D, Duplo315, with 3rd function, 3-cylinder, air-cooled DIESEL, as traded in. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on site. Isdpfx Aez Dhc Nohnoig Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2012, machine/vehicle number: 7363126525, Item No. 26261 Hydraulic CNC Press Brake Ijdezzzcmopfx Ahnjig Technical data: - Pressing force 320 t - Working width 3050 mm - Distance between uprights 2550 mm - Overhang 460 mm - Installation height approx. 630 mm - Ram stroke 365 mm - Motor power approx. 37 kW - Space requirement approx. W 5700 x H 3250 x D 2450 mm - Weight approx. 17500 kg - Including: - Pivoting arm – control panel with control system CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain - Electric foot pedal - 4-way universal die, split - V-dies - Split top tool set, various other tools

Condition: ready for operation (used), Year of construction: 2011, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: 044, overall weight: 25,000 kg, Doppstadt DH 910 SA with 6300 operating hours, fully operational. Iedozwdvuopfx Ahnjig

Condition: not inspected (used), Year of construction: 2020, functionality: unexamined, machine/vehicle number: 71193, measuring range X-axis: 3,000 mm, total width: 500 mm, total length: 1,000 mm, total height: 1,000 mm, overall weight: 30 kg, positioning accuracy: 0.045 mm, ● Availability: By arrangement ● Internal No.: ZM3 Technical data: Measuring volume: 3,000 mm Accuracy: 0.045 mm Scope of delivery: ● Including laptop and software as shown in the images (completeness not guaranteed) Iodpoz A Tcfjfx Ahneig ● Including transport case Dimensions & weights: ● Installation dimensions (L x W x H): approx. 1,000 x 500 x 1,000 mm ● Weight: approx. 30 kg Additional notes: ► Upon request, we can offer transport to the destination. ► The goods are sold with no warranty whatsoever. ► Technical data subject to change without notice.

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, power: 2.2 kW (2.99 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 295 kg, We are selling our used Optimum machine. The motor has a defect in the winding. The machine can be inspected and collected in Hoppegarten. Iisdpfxszxp Nve Ahnjg No warranty, no guarantee, no returns.

Condition: good (used), Year of construction: 2004, operating hours: 31,189 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 426/430PB, rotary table diameter: 800 mm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 36, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this well-maintained Matec matec-30 HV universal machining center, manufactured in 2004. Iodpozndurefx Ahneig Manufacturer: Matec Model: matec-30 HV Year of manufacture: 2004 Condition: good Category ID: 1463 Type ID: 4166 Machine type: Universal machining center 2000 x 800 x 800 mm (x y z) Installed rotary table D800mm Swiveling head, incremental indexing of +-110° 15,000 RPM, SK40, internal coolant 40 bar / compressed air through the spindle, tool magazine with 36 positions Heidenhain TNC 426/430PB The machine is being sold because we need space, and it is coming directly from our production. The location is 85625 Baiern. The machine is still in production and can be inspected while powered on. If you have any questions or need more information, please send us a message or call us.