Used Dvs Ugrind 800 for sale (8,295)

Condition: good (used), Year of construction: 1989, turning diameter over cross slide: 820 mm, spindle bore: 128 mm, turning diameter over bed slide: 515 mm, turning length: 2,000 mm, total length: 6,000 mm, total width: 1,900 mm, total height: 1,800 mm, spindle speed (max.): 1,400 rpm, Centre lathe VDF BOEHRINGER - DUE 800 MACH-ID 9760 Make: VDF BOEHRINGER Type: DUE 800 Year: 1989 3 Axis HeidenHain ND780 dro 3 chuck 400 mm 4 chuck 800 mm Steady rest closed ca 400 mm Steady rest C-Type ca 400 mm DBC Turning Length: 2000mm Swing over bed Ø: 820mm Swing over cross slide Ø:515mm Spindle bore: 128mm Spindle power: 30kW Bed width: 560mm Speeds / ranges: 1400Rpm Quill Ø: 125mm Psdjzpwwpepfx Af Rjgp Workpiece load: 5000 Length: 6000mm Width: 1900mm Height: 1800mm Weight: 6700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication Podpov Amryjfx Af Rsgp - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: excellent (used), 2-tank metalparts-cleaning machine usable length: 800 mm usable width: 600 mm Pgjdpfszndnljx Af Rjp usable hight: 400 mm loading capacity: 150 Kg. volume of washing-tank: 1.000 Ltr. volume of flush-tank: 1.100 Ltr.

Condition: used, EOS Transitube DCL 800/30 PM Powder Conveying System / Dosing System for 2 Components Description For sale is a used EOS Transitube DCL 800/30 PM powder conveying system from tim plast Anlagenbau GmbH. The system was developed for the continuous dosing, conveying, and homogenization of two material components. It is suitable for processing powders, granules, and ground materials in the plastics industry. The materials are dosed precisely, mixed via the Transitube conveying system, and continuously fed to the production machine. According to the manufacturer, the DCL series is designed for the continuous dosing and mixing of two components. Due to its robust industrial design and extensive scope of supply, the system is ideally suited for use with extrusion and injection molding machines. Technical Data Manufacturer: transitube / tim plast Anlagenbau GmbH Model: DCL 800/30 PM Designation: EOS Powder Conveying System Material hoppers: 2 × approx. 400 liters Conveying capacity: approx. 50–2,000 kg/h (material dependent) Dosing accuracy: ±0.5 to ±2 % Dosing range: 5–50 % Additive dosing: 0.2–10 % Mains connection: 3/N/PE 400 V AC Frequency: 50/60 Hz Connected power: 2.0 kW Dimensions (approx.): Width: 1,850 mm Depth: 900 mm Pgedpfjzn H D Nex Af Rjp Height: 1,320 mm Weight: approx. 180 kg Equipment 2 dosing hoppers with hinged lids Transitube screw dosing system Automatic control cabinet with touch panel Electrical control Conveying and mixing system Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Extensive hose and pipe package Accessories as shown in the pictures Application areas Plastics processing Extrusion Injection molding technology Powder conveying Granule conveying Ground material dosing Material mixing Production automation Condition Used. The system is in good condition with normal signs of wear and tear consistent with its age. The scope of supply corresponds to the photos shown. Scope of supply EOS Transitube DCL 800/30 PM powder conveying system Control cabinet Conveying units Motors Pneumatic components Piping Conveying hoses Extensive accessories as shown in the pictures Shipping Inspection possible by appointment at any time. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder possible for an extra charge. Subject to prior sale and errors.

Condition: good (used), LDS V830-335T Electrodynamic Vibration Test System with SPA10K CE and VENZO 800 Description For sale is a used electrodynamic vibration test system from Ling Dynamic Systems (LDS) consisting of: LDS V830-335T Shaker LDS SPA10K CE Power Amplifier DTC VENZO 800 Vibration Controller The system is suitable for professional vibration, shock, and environmental testing in research, development, quality assurance, as well as fatigue and material testing. Special feature of the controller: 8 activated measurement and control channels Activated in 2015 Integrated charge amplifier Sine Random (noise) Shock Resonance Search Dwell & Tracking Transient Capture Technical data, shaker Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V830-335T Design: Air-cooled electrodynamic shaker Pgjdpfeznlzyox Af Rsp Sine force: 9,807 N peak Random force: 9,807 N RMS Maximum travel: 50.8 mm peak-to-peak Maximum velocity: 2.0 m/s Maximum acceleration sine: 735 m/s² (75 g) Maximum acceleration random: 588 m/s² (60 g) Frequency range: DC to 3,000 Hz First major resonance: 2,250 Hz Armature diameter: 335 mm Maximum test specimen weight: 160 kg Cooling air requirement: 0.245 m³/s Power amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Model: SPA10K CE Sine output power: 10,000 VA Maximum input power: 19.41 kVA Supply 50 Hz: 380 / 400 / 415 / 440 V Supply 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Mains voltage: 400 V ±6 % Equipment: LCD display Numeric keypad Master gain control Emergency stop Integrated air cooling Protection and monitoring systems Controller DTC VENZO 800 Vibration Controller Dactron Dual-DSP Shaker Control System 8 activated measurement and control channels Integrated charge amplifier Activated in 2015 Scope of delivery LDS V830-335T shaker with swivel frame LDS SPA10K CE power amplifier DTC VENZO 800 controller Dactron Dual-DSP controller Connection cables Software CD System manuals Calibration documents (available) Condition Used. Normal signs of wear and tear due to age and use. Scope of delivery as shown in the pictures. Pickup or shipping by freight forwarder by arrangement.

Year of construction: 1993, condition: ready for operation (used), controller manufacturer: SIEMENS, Metal Band Saw manufactured in 1993. This Friggi 2MF/AUT 800 x 800 2C features a cutting capacity of 800 x 800 mm and a round diameter of 800 mm. It is equipped with a powerful 7.4 kW saw blade motor and a hydraulic pump with a delivery rate of 58 L/min. If you are looking to get high-quality cutting capabilities, consider the Friggi 2MF/AUT 800 x 800 2C machine we have for sale. Contact us for further details. Pgjdpfxjznazbe Af Rsp - Cutting Capacity (Rectangular): 800 x 800 mm- Cutting Capacity (Round Diameter): 800 mm- Front Minimum Cut: 105 mm- Rear Minimum Cut: 50 mm- Band Pulley Diameter: 900 mm- Blade Dimensions: 67 x 1.6 mm- Blade Length Range: 9,680 - 9,800 mm- Saw Blade Speed: 20 - 90 m/min- Saw Blade Motor Power: 7.4 kW- Saw Arm Movement Motor Power: 7.1 kW- Automatic Saw Arm Lowering Speed: 0 - 3000 mm/min- Hydraulic Pump Reservoir Capacity: 115 L- Hydraulic Pump Delivery Rate: 58 L/min- Hydraulic Pump Motor Power: 9.2 kW- Total Installed Power: 26 kW- Power Supply Voltage: 380 V- Frequency: 50 Hz- Machine Colors: RAL 6011 / RAL 2004- Control System: Siemens Simatic Panel / UniOP Panel- Included Equipment / Scope of Delivery: Hydraulic aggregate unit, standalone electrical control cabinet, control panel, material feed roller conveyor table

Condition: ready for operation (used), B&R 5AP820.1505-00 Automation Panel 800 with 5AC800.EXT1-00 keyboard + 5AC800.EXT3-03 keyboard extension, used, in good condition, 100% functional, scope of delivery as shown in the photos. Psdpfx Aox Equ Njf Rjgp

Condition: used, Year of construction: 2013, total length: 5,100 mm, total width: 1,800 mm, total height: 1,950 mm, Colour: White Empty weight: 7.500 kg Price: On request Pgodpfjznmlgsx Af Rsp - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 40032 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 445 - Swing over bed [mm]: 890 - Carriage turning diameter [mm]: 490 - Distance between centres [mm]: 3000 - Bed width [mm]: 700 - Spindle bore [mm]: 155 - Min. spindle speed [rpm]: 3.7 - Max. spindle speed [rpm]: 1000 - Max. workpiece weight [kg]: 5000 - Options: Three-jaw chuck, Quick-change tool post, Fixed steady, Digital readout, Removable bed - Swing over removable bed [mm]: 1060 - Type of digital readout: Fagor - Transport dimensions: 5100mm x 1800mm x 1950mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Pgsdpeyugctofx Af Rsp Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Pgjdpfexqh I Iex Af Rep Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Podpfx Aezd Ta Nof Rogp Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg

Condition: new, Year of construction: 2007, Storage location number: 100577028 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Location: Passau Dimensions: 3,750 x 1,450 x 2,180 mm (L x W x H) Pgjdozp T Tajpfx Af Rsp Weight: 3,644 kg Engine: Volvo TAD740GE Fuel: Diesel Power output: 250 kVA

Condition: good (used), Quick-change tool holder, size D1, with support, compatible with a SEIGER SLZ 800 cycle lathe. Pgodpfxew Ec Eys Af Rop Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), For sale is a Rietschle CLFT 81 DV vacuum-pressure pump from a renowned German manufacturer. This is a dry-running rotary vane pump designed for simultaneously generating vacuum and compressed air. It finds application in packaging machines, printing machines, woodworking machines, CNC machines, pneumatic conveying systems, and many other industrial installations. The unit is equipped with a three-phase motor with a power of 3.0 kW and is mounted on a robust, compact frame. Technical data: Manufacturer: Rietschle Model: CLFT 81 DV (13) Year of manufacture: 1991 Country of manufacture: Germany Type: vacuum-pressure pump (dry-running, rotary vane) Capacity: 80 m³/h (50 Hz) Maximum overpressure: 0.5 bar Motor power: 3.0 kW Rotational speed: 1450 rpm Power supply: 3×380 V Continuous operation: S1 Serial number: 1375434 Application: Pgsdpfeziw Rpjx Af Rsp packaging machines, CNC machine tools, woodworking industry, printing industry, pneumatic conveying, equipment requiring vacuum or compressed air. Condition: Used. Visual condition as shown in the photos. Robust construction, ready for further operation.

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Maximum module 6 to 10 mm Podpfx Afecrd Nme Regp Max. working diameter 320 to 800 mm

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm table surface area 560 x 650 mm capacity of ejector 5 t ejector stroke 15 mm ram surface 590 x 450 mm power requirement 22,0 kW Weight 17,0 t dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Nominal force travel 1,46 mm Pedpfx Afozl E Sao Rsgp With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control

Condition: used, HERBOLD PU800 pulverizers Suitable for soft to medium-hard materials Used so far for fine grinding of plastics Diameter of grinding disks: 800 mm Drive motor: 90 kw Pgsdpfozmddwox Af Rsp

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, controller manufacturer: MAZATROL, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 48, number of axes: 3, This 3-axis Mazak VTC-800/30SR was manufactured in 2019. It features a spacious table size of 3500 x 800 mm and impressive X-axis travel of 3000 mm. The machine is equipped with a maximum spindle speed of 18,000 rpm and a tool magazine capacity of 48 positions. If you are looking to get high-quality machining capabilities, consider the Mazak VTC-800/30SR vertical machining centre we have for sale. Contact us for further details. • Table size: 3500 x 800 mm • Control/software features: G00 constant acceleration ramp; cylindrical interpolation (G07.1); polar coordinates (G12.1) • 5-axis capability: Full 5-axis package enabled in control (note: no 5th-axis rotary table included) Psdpfx Ajzmg I Eef Regp Additional equipment • Coolant through spindle, high pressure 20 bar • Tool eye/presetter with automatic tool presence and tool breakage detection • Air blow, adjustable nozzle on spindle flange • Chip conveyor: Mayfran, right-side hinge-type belt • Central partition wall • 3-color status light • Additional work area lighting Technical Specification Taper Size ISO 40

Condition: good (used), Code: 0347 Brand: CENTAURO Model: CO 800 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames, plastics, aluminum, composite materials and various - CE Standard Technical data: Cast iron flywheel diameter mm 800 Max cutting height mm 520 Height of table from floor mm 960 Table dimensions mm 1170 x 800 Max blade length mm 5670 Motor Hp 5,5 Tilting work table Podpsyxmm Iefx Af Regp Telescopic blade guard N° 2 suction inlets diameter 120 mm Overall dimensions: mm 1550 x 850 x 2500 h Weight kg 630

Condition: used, Year of construction: 2001, Demag ergotech concept 800/420-310 (2001) Pgjdjyyzqwspfx Af Rjp

Year of construction: 1980, condition: used, For sale: a KENSA MASKIN SA 800 automatic coil unwinding unit, designed for narrow strip, steel coil, and wire. The unit is used and features a robust industrial design. It is powered by an electric motor and designed for the automatic feeding of material into a production line. It is ideally suited for profiling, stamping, rolling, wire processing, and other automated production lines. Technical specifications: Manufacturer: Kensa Maskin Model: SA 800 Year of manufacture: 1980 Drive: Electric Maximum coil weight: 500 kg Maximum coil outer diameter: 800 mm Minimum coil inner diameter: approximately 400 mm Maximum coil width: 500–800 mm (depending on the configuration) Automatic material feed Robust industrial design Pgodpfozg Tdmox Af Rop If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x900x1350 mm Weight 300 kg Pgjdpfjvz E Idjx Af Rsp Total power requirement 1,6 kw

Condition: good (used), Code: 0443 Brand: CMC - ITALY Model: SC 800 - CE Standard Band saw with covered wheel for cutting wood, carpentry, furniture, fixtures, plastics, aluminum, and other materials - CE Standard Technical specifications: Flywheel diameter 800 mm Working table size 710 x 1110 mm Cutting height 450 mm Blade length 5620 mm Motor 5,5 Hp Pgjdszlqrfopfx Af Rop Overall dimensions mm 1450 x 850 x 2400 h Weight kg 580

Condition: good (used), machine/vehicle number: 85382, UNIVERSAL MACHINING CENTER MAHO MH 800 C, series: 85382 X axis stroke 800 mm Y axis stroke 500 mm Z axis stroke 600 mm Pedpjldgf Hefx Af Rjgp Work table dimensions: 900x625 mm Maximum weight allowed on the table: 600 kg Spindle rotation speed: from 20 to 5.000 rpm, 15 kW Tool taper: ISO 40 cone Tool shop with 30 positions MAHO numerical command Machine dimensions: 3,350mm x 2,520mm X 2,500mm; Car weight: 6,200 kg Good technical condition Price EURO 7.000 + VAT Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Altarfalztaschen (Fensterfalztaschen) / Gateway Buckles MBO 76 - 79 - 530 - 800XX124 - Altarfalztaschen (Fensterfalztaschen) mit Steuerung / Gateway Buckles with Control box for MBO KT76 XX047 - Altarfalztaschen (Fensterfalztaschen) mit Steuerung / Gate Online-Video-Inspection by Skype-Video Pedpfxorgbzws Af Regp We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test