Used Ebro Disc Valve Dn50 for sale (13,037)

Condition: new, tank capacity: 437 l, wall material: stainless steel, Unused, temperature-controlled stainless steel container with insulation Article number: 10910 Volume: Approx. 437L Material: 1.4404 stainless steel V4A Surface: Interior IIId, exterior satin finish Welded seams inside the container pickled, passivated and brushed Operating pressure: ATM Operating pressure for thermoplates: Max. 1.8 bar -Vertical design on three legs -Top: 1/2 hinged lid, 1/2 fixed with screws, with tension handle (can be locked open) -Sheet metal grids below the hinged lid as a strainer, screwed on, removable -1x thermoplate on the cylinder, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -1x thermoplate on the bottom, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -Insulation t=30mm mineral wool for cylinder and bottom, welded stainless steel insulation jacket 1.4301 -Bottom: Conical bottom with central outlet and forward-extending pipe DN50 DIN11851 -Outlet valve: ball valve DN50 DIN11851, gasket EPDM/PTFE -Agitator flange on the top Container dimensions: Outer diameter: 650mm Cylindrical height: 1300mm Overall width: 750mm Overall length: 850mm Overall height: 1930mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4404 / AISI 316 Features: Outlet diameter: DN50 Distance from outlet to bottom: 110mm Kodpfx Ajzwmr Eefdenb Height of legs: 330mm Nameplate: yes Agitator: Variable speed propeller agitator for low-viscosity media Type: SRT8-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.75kW Speed: 1410 RPM (continuously adjustable) Voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for smooth running within the speed range -1 piece 3-blade mixing propeller Ø 138mm at the end of the agitator shaft Mixing propeller made of a stainless steel casting, highly polished -Stainless steel flange, sealing V-ring, EPDM -Motor mounted on neoprene rubber buffers Infinitely variable speed control of the agitator motor via a compact, motor-mounted frequency inverter, manufactured by Getriebebau NORD. Including potentiometer. Pre-programmed for agitator operation. Operating voltage 3PH 400V

Condition: used, maximum load weight: 14,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2025, Equipment: ABS, Dimensions and Weights External length approx. 7,055 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,285 mm Rollway length approx. 6,890 mm Wheelbase 5,240 mm Complete empty weight approx. 3,400 kg Gross weight approx. 18,000 kg Payload approx. 14,600 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis construction made of welded I-beams in QSTE steel. 4 container locks and top slide lock are pneumatically operated. Side guards closed according to Directive 89/297/EEC. (Item 2) Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40 mm, outer diameter 110 mm, thickness 30 mm. Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 430 mm, Wheel mounting by centering according to DIN 74 361 Part 3. Braking system Air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Knjdpfx Aevzdw Dofdob Lighting system 24-volt full LED lighting system according to Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice. 1 x 15-pin connector 6 x LED side marker reflectors with flashing indicators 2 x white LED front marker lights 2 x separately mounted LED rear lane departure lights 1 x LED reversing light Wheels/Tires Regional transport tires: 4 x 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box 2 container guides Paintwork Chassis color: MB 7350 Nova Gray Sliding attachment: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook, container guide: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions DEKRA Expert opinion Side guard closed Hanging net box, galvanized All information is provided without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: used, maximum load weight: 14,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2025, Equipment: ABS, Dimensions and Weights External length approx. 7,055 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,285 mm Rollway length approx. 6,890 mm Wheelbase 5,240 mm Complete empty weight approx. 3,400 kg Gross weight approx. 18,000 kg Payload approx. 14,600 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis construction made of welded I-beams in QSTE steel. 4 container locks and top slide lock are pneumatically operated. Side guards closed according to Directive 89/297/EEC. (Item 2) Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40 mm, outer diameter 110 mm, thickness 30 mm. Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 430 mm, Wheel mounting by centering according to DIN 74 361 Part 3. Braking system Air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system according to Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice. 1 x 15-pin connector 6 x LED side marker reflectors with flashing indicators 2 x white LED front marker lights 2 x separately mounted LED rear lane departure lights 1 x LED reversing light Kjdpfx Aovzdwwofdenb Wheels/Tires Regional transport tires: 4 x 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box 2 container guides Paintwork Chassis color: MB 7350 Nova Gray Sliding attachment: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook, container guide: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions DEKRA Expert opinion Side guard closed Hanging net box, galvanized All information is provided without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: used, 113m³ above-ground steel tank on steel supports Diameter: 3.10m Length: 15m Cylinder wall thickness: 8mm Front wall thickness: 12mm The tank has a hole in the top (visible in the photo), which we will weld. The following optional additions to the tank are priced separately: Applying an state hygiene institution approved coating Kodpfx Afjw El Dlodenb A DN50 float valve, or a DN100 float valve, including installation. The price depends on the float valve diameter. We have our own specialized trailer. Delivery costs depend on the destination.

Condition: used, maximum load weight: 34,880 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 10/2009, loading space volume: 34 m³, Year of construction: 2009, Equipment: ABS, Stock no. 5835 34,000 liter Spitzer tank trailer with 4,000 liter Vogelsang pump / trailing axle / aluminum rims ---- * Manufacturer: Spitzer * Type: SF2734/2P * First registration: 10/2009 * Gross vehicle weight: 40,000 kg * Unladen weight according to vehicle registration document: 5,120 kg * Payload: 34,880 kg * Axles: 3 x BPW / 3rd axle is a trailing axle / disc brakes * Suspension: Air suspension * Tires: 385/65 R 22.5, approximately 50% tread, on aluminum rims * EBS Wabco * Color: Blue/White * Operating temperature from -20 degrees to +80 degrees * 2 funnel cones * 2 baffle plates * 3 dome lids, screw-on * Vogelsang 4000 liter rotary lobe pump, type VS 136-2106 * Sight glass on the front left * 2 outlets, left + right * Flushing connections with 3 valves to flush both outlets separately Ksdsy T Dlqepfx Afdjnb * Access with walkway on the left, pneumatically operated from below * Individual fenders * Open hose storage on the right * Full load supports * Loading pressure gauge * LED reversing lights * Work lights on the side * 1st owner German trailer!! German documents!! 1st owner!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: good (used), Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve Kedpfx Afjptf Idsdjnb -Manufacturer: Prema-Service, Permaflex - pinch valve -Pinch valve pneumatic -Connection: DN100 -Hole circle: Ø 180 x 18 mm -Quantity: 2x valves available -Price per piece -Dimensions: Ø225 x 280 mm -Weight: 15 kg/piece

Condition: used, Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, PQV - pneumatic pinch valve -Type: PQV DN 125 Knjdpfx Aepumagofdjb -Hole circle: Ø 210 x 18 mm -Quantity: 5x valves available -Price per piece -Dimensions: 350/270/H250 mm -Weight: 17kg/piece

Condition: used, Used stainless steel transport container / storage container Item number: 10837 Last intended use: Food Volume: approx. 650L Type: Standing on four feet with forklift tunnel Material (wetted parts): 1.4301 / AISI304 Design: Single-walled Container dimensions: Manhole: 400mm Outer diameter: 1000mm Cyl. Height: 800mm Total height: 1530mm / 1560mm Total width: 1000mm Total length: 1000mm Materials: Interior: 1.4301 / AISI 304 Exterior: 1.4301 / AISI 304 Fittings: Knedpfxowcd T Hs Afdeb Outlet: DN50 DIN11851 Outlet valve: Disc valve Distance from drain to floor: 180mm Height of feet: 450mm Nameplate: No

Condition: used, *Filter area: 3 m2 Installed power: 2,45 kW Horizontal disk filter with manual discharge system* Ksdpfx Afoz Ai Iajdenb This filter uses the horizontal disc system, the only type able to ensure the panel is undamaged even by accidental interruptions in filtration. There is no risk to the panel even in the event of incorrect operation or power cuts. The liquid in the vessel, batching unit and pipes is filtered perfectly at the end of work using a special disc for the purpose. The special filter unit used means that cleaning can be carried out simply using a jet of water and the sped al chute supplied. Manufactured in stainless steel throughout, including the feed pump, pipes, valves and caster-mounted frame. Complete kieselgur batching system with vanable delivery piston pump and stainless steel tank with built-in electric mixer. Electric panel complete with every control and safety device required for safe, dependable operation.

Condition: refurbished (used), Year of construction: 2016, Stainless Slitter 1500x3, made SAMO OCEMI Completely revamped in the year 2016. Technical specifications Thickness minimum: 0,4mm Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2 Coil width: max 1.540 mm. Max coil weight: 16 t Direction: left to right Speed: up to 150 m/min. Scope of supply · Coil car, hydraulic, Over floor · Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake. Motorized snubber roll. Paper rewinder. Alignment. · Coil opener with telescopic table. · Feeding unit with pinch-roll and 3-rolls straightener. · Centering unit (motorized) with 3 flattening rolls (poliurethane). · PVC film applicator (new 2017) · Slitting head, shaft diam.: 200 mm. DC motor 72 kW 780-2.652 rpm + stationary brake. · Turnstile knife charger – 2 arms couples. · Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake. Scrap table, movable, with scrap conveyor. · Scrap rewinder, single drum dimension 600x600. Ac motor 15 kW with inverter. · Bypass table (loop) · Braking car (movable) with: - double separating roll - Deburring pinch-roll (new in 2017) - Felt press - Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery. - Cross cutting shear (crop shear) - Deflector roll - Recoiler, hydraulic expansion, separating arm with automatic lifting system. DC motor 114 kW 800-2.400 rpm + stationary brake. · Discharging coil car, over floor, with press arm. · Turnstile arm 4 x 20 t, motorized · Electric EQUIPMENT (NEW in year 2016). Supply voltage 3x380V Consisting of: Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300. N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch · Hydraulic equipment. Knjdpfxoymcmfj Afdsb Hydraulic power pack with oil-air cooling. Manifolds with electric valves on each machine, 24 V DC · Complete safety fences, mechanical/optical. · Cutting tools (knifes approx. 160 pieces, spacers, separating discs..). Documentation Foundation drawings Electric drawings. Hydraulic plan. PLC and HMI Software. CE declaration of Conformity Thickness minimum: 0,4 mm Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2 Coil width: max 1.540 mm Max coil weight: 16 t Speed: up to 150 m/min Direction: left to right

Condition: used, total width: 30,000 mm, Year of construction: 2006, Equipment: ABS, Goldhofer STZ-H6-57/80A Telescopic Lowboy Trailer for Wagon Transport                                 Approval          Technical 1 Speed:      80 km/h                65 km/h Fifth wheel load:                23,000 kg              26,000 kg Rear axle load:        10,000 kg              11,000 kg Total weight:      83,000 kg              92,000 kg Payload:                  52,500 kg              61,500 kg Tare weight: (without accessories):          30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Height: 235 mm Fifth wheel height: 1,350 mm DLR front: 1,420 mm DLR rear: 2,700 mm Kingpin: 3.5 inches Inclination: angled 10 degrees Front corners: angled 45 degrees Decking: Spruce 50 mm Fifth wheel supports: mechanical Width with sideboards: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically raisable and lowerable with mechanical drop-side supports and hydraulic lowering cylinders Hydromechanical forced steering (2-circuit steering) in a flat design (height 235 mm) with adjustable guide elements and THP steering cylinders. Loading platform: Type: Platform Liftable: no Length: 13,000 mm Width: 3,000 mm Decking: Sheet metal/Spruce 50 mm Wheel recesses: no Extensions: no Extendable: single telescopic Length1: 10,000 mm Loading heights (loaded) Loading height 1: 815 mm Telescopic loading platform, designed as an outer and inner tube structure, with a 1,070 mm long, fixed loading platform section at the front. Integrated bolt-on coupling in the fixed loading platform section for connecting tank bridge extension beams; the welded track rails serve as a rail track in the track gauges of 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension stages by means of spring accumulators and conical bushings Loading platform height on the frame center tube (outer tube) approx. 815 mm (+/- 130 mm) Loading platform height on the embedded rail elements approx. 790 mm (+/- 130 mm) Rear axle: Axle design: Standard Loading height, loaded: 815 mm Width: 3,000 mm Wheelbase: 1,360 mm Decking: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no Axles: Number of axles: 6 Lift axle: see accessories Axle type: Steered stub axles Axle equalization: hydraulic Axle manufacturer: BPW/Eco Operating positions: 1 Axle travel (1) +/-: 130/130 mm Axle travel (2) +/-: 0/0 mm Raising/lowering valve: Yes 1st axle pneumatically liftable with lift bellows Steering: Number of steered axles: 6 Steered axle arrangement: all steered Maximum steering angle: 45° Steering type: Hydraulic 2-circuit Tires: Dimension: 235/75 r 17.5 143/141 J Knedpjyfvf Sefx Afdob Tire type: Twin Rim type: Disc Rim centering: Center-centered Brake code: According to EU standard: Yes ABS: Yes ALB: Yes EBS: Yes with ABS connection spiral: No Parking brake: Spring accumulator EBS: No ECAS: No Note: Brake calculation no.: GH 4324S Chassis note: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow transverse outriggers in between (aluminum covers, see accessories below) Control elements protected on the left in the direction of travel...

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. Kodpfx Afox D Df Nsdsnb - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, gate valve, gate valve, diaphragm valve, diaphragm stop valve -Manufacturer: Sisto, gate valve diaphragm valve orig -Type: THM6-02 DN40 PN40 A105 H.64806 -Number: 2x valve available Knodpfoiqy Tzsx Afdeb -Price per piece -Dimension: 285/140/H200 mm -Weight: 6.4 kg/pc.

Condition: used, axle configuration: 2 axles, first registration: 07/2026, Year of construction: 2026, Equipment: ABS, ZWF/W 18 Center Tube, Central Axle Lift Trailer, Tire Size 22.5, Single Dimensions Chassis designed for interchangeable bodies from 7150 to max. mm (symmetrical bodies) Chassis designed for rear-flush mm (with impact buffer) Test lowering heights: ZWF: Vehicle must lower at least +70mm and raise -20mm, WF: +60mm/-20mm, WFS: +60mm/-20mm Axle loads: 18,000 kg (2 x 9,000 kg) Spring center approx. 1300 mm Support load approx. 1000 kg Lowering heights approx. 1120 to max. 1320 mm via air suspension of the trailer and the tractor unit Coupling height (low coupling) approx. 400 mm unladen Ride height unladen approx. 1100 mm 2nd ride height, if axle lift is used, is approx. 40 mm higher (tire lift via axle lift increases the ride height), only if necessary Ground clearance approx. 1070 mm on level ground Chassis No. generally stamped on the side of the longitudinal member, right side, approx. 100 mm from the front E-wheel holder Prepared for E-wheel holder in winch design for 1 E-wheel Front stop, foldable and adjustable for 7150 mm symmetrical interchangeable bodies Support winches 1 set of drop-leg supports at the rear, height-adjustable 1 set of support winches at the front Coupling device Coupling spring travel approx. 1400 mm Intermediate distance 760 mm (with mm interchangeable body) Connection lines for lights/brakes, route lines inside/on the drawbar on the right Storage for connection lines on the side of the drawbar Drawbar rigid (center tube) with bolted drawbar eye Drawbar eye ø 50 mm SMB axle with Haldex/Wabco/Knorr brake and Weweler air suspension selected 2x axle with large disc brake (430, or 4309/4312/4345) 2x axle 9t 22.5 disc brake, single tires for air suspension Knsdjzir Ipopfx Afdsb Bellows plates, rotate at 340-400 lift (not on the bogie, not with SMB) Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Axle distance approx. 1360 mm (with total lift of approx. 300 mm, 340 mm or 400 mm) 2x air suspension, total lift approx. 400 mm 1 coupling head each, red and yellow Test nipple for brake cylinder pressure on the brake cylinder at the front right Air reservoir 2 x approx. 80 l in steel, painted black (1x brakes, 1x lifting and lowering) Lifting and lowering device at the rear left in the direction of travel Tire pressure control, basic version, connected to the CAN bus system of the EBS Brake/ABS EBS brake system, manufacturer Knorr/Wabco/Haldex at our choice, with Roll Stability Program 2x wheel attachment by center centering 4x tires 385/55 R 22.5 instead of 385/65 22.5, brand manufacturer at choice, system on -wheel 11.75 x 22.5 Brand tires 385/55 R 22.5 at choice Spiralflex Spiralflex cables and hoses for light and brake connection to the tractor unit, with mounting plate (standard) 15-pole plug or socket at the front Lighting system 24 Volt with large multi-function lamp Lighting system/wiring system, manufacturer at our choice (closed lighting system) License plate lighting Rear lights (LED) under the rear container support, beam of light to the rear Rear lights (LED) at the very front, under the stop, beam of light to the rear Side marker lights (LED), flashing (all SIDE lights flash), attention! Possible problems with tractor units! 9 (min.)-pole cable as connection front-rear (min.) Position lights (LED) mounted on a separate holder (not attached to the lamp) Position of position lights: Mounted on the underrun protection (if there is a kink to the rear, the UFS will not be pinched) Position light (LED) at the

Condition: good (used), tem: D-7856-Samson-steam Valves Kodpfxoirfb Ee Afdenb Diverse steam valves made by Samson complete with control box! For more informations please contact us! DN 20/DN40/DN50/DN65/

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter Kjdpfxjx D A Rke Afdjnb - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: used, loading space length: 1,90,000 mm, loading space width: 30,000 mm, loading space height: 8,150 mm, total width: 30,000 mm, Year of construction: 2006, Equipment: ABS, Goldhofer STZ-H6-57/80A Telescopic Lowboy Trailer for Railcar Transport                                 Approval          Technical 1 Speed:     80 km/h               65 km/h Fifth wheel load:               23,000 kg             26,000 kg Rear axle load:       10,000 kg             11,000 kg Total weight:     83,000 kg             92,000 kg Payload:                 52,500 kg             61,500 kg Tare weight (without accessories):         30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Height: 235 mm Fifth wheel height: 1,350 mm DLR front: 1,420 mm DLR rear: 2,700 mm Kingpin: 3.5 inches Inclination: inclined 10 degrees Front corners: inclined 45 degrees Decking: Spruce 50 mm Fifth wheel supports: mechanical Width with sideboards: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically raisable and lowerable with mechanical support tube and hydraulic support cylinders Hydromechanical forced steering (2-circuit steering) in a low-profile design (height 235 mm) with adjustable guide elements and THP steering cylinders. Loading platform: Type: Platform Ratable: No Length: 13,000 mm Width: 3,000 mm Decking: Steel sheet/Spruce 50 mm Wheel wells: No Extensions: No Extendable: single-telescopic Length 1: 10,000 mm Loading heights (loaded) Loading height 1: 815 mm Extendable loading platform, designed as an outer and inner tube construction, with a fixed loading platform section of 1,070 mm in length at the front. Bolt-tab coupling integrated into the fixed loading platform section for connecting railcar bridge extension beams; the welded track rails serve as a rail track in the gauge widths of 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension stages by spring accumulator cylinders and conical bushings. Loading platform height on the frame center tube (outer tube) approx. 815 mm (+/- 130 mm) Loading platform height on the embedded rail elements approx. 790 mm (+/- 130 mm) Rear suspension: Suspension type: Standard Loading height loaded: 815 mm Width: 3,000 mm Track width: 1,360 mm Decking: Steel sheet Extensions: No Wheel wells: No Excavator well: No Axles: Number of axles: 6 Lift axle: see accessories Axle type: Curved steering knuckle Axle equalization: Hydraulic Axle manufacturer: BPW/Eco Riding positions: 1 Kodpfx Ajyfvypofdenb Axle stroke (1) +/-: 130/130 mm Axle stroke (2) +/-: 0/0 mm Raise/lower valve: Yes 1st axle pneumatically liftable with lift bellows Steering: Number of steering axles: 6 Steering axle arrangement: all steered Maximum steering angle: 45° degrees Steering type: Hydraulic 2-circuit Tires: Dimension: 235/75 r 17.5 143/141 J Tire type: Twin Rim type: Disc Rim centering: Center-centered Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS connection spiral: No Parking brake: Spring accumulator EBS: No ECAS: No Note: Brake calculation No.: GH 4324S Suspension note: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow transverse outriggers in between (aluminum covers see above Accessories) Controls protected on the left in the direction of travel...

Condition: used, Year of construction: 1995, Beer clarification plant with a self-discharging separator. The separated spent grain is temporarily stored in a 55 hl conical stainless-steel tank. Knjdpezizh Ssfx Afdsb Additional title: Disc centrifuge for the preliminary clarification of beer Capacity: 20000 l/h Volume sludge tank: 5500 l Material: stainless steel Position: standing on feet Features: Separator; sludge tank; pump; flow measurement; turbidity measurement; control cabinet with touch-screen display; special tools; various pipes, pipe panel and valves

Condition: used, maximum load weight: 28,880 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2003, loading space volume: 49 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2003, Equipment: ABS, 3-axle Schrader Tank Trailer 49m³ VIN: 1S82316 Chassis / Accessories: * 3 x BPW Eco Plus axles with disc brakes * Air suspension * Lift/lower function * Drop-down supports * Tires: 385/65 R.22.5 * Alcoa aluminum rims Kjdpfx Asxzmbbjfdonb * Remaining tread depth: 1st axle: 20/30% // 2nd axle: 30/50% // 3rd axle: 30% * 1x storage box * 1x spare wheel holder Superstructure: * Schrader chemical tank trailer * Volume: 49 m³ * ADR FL/AT specification * 5 compartments * 1st: 7,500 l 2nd: 7,500 l 3rd: 20,000 l 4th: 7,000 l 5th: 7,000 l * 6 dome covers (20,000-liter compartment with two dome covers) * 5 outlet valves * Overfill prevention F.A. Sening Weights: * Gross weight: 38,000 kg * Payload: 28,880 kg * Unladen weight: 9,120 kg Other features: * German vehicle * ADR FL/AT * SP valid until 07/2026 * 1 previous owner New main inspections / safety checks or weight upratings/deratings are possible upon request. We are happy to assist you with obtaining export/temporary license plates, and we can also arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for typographical or spelling errors. Subject to changes, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner to customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. Customer satisfaction is especially important to us, which is why we offer an outstanding all-round service package and provide a competent contact person who will support you in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to help you load your purchased vehicles. Organization of special transports We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to help you obtain export or temporary license plates. Handling of customs formalities We are happy to assist you with customs matters.

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Kodpjycnf Sjfx Afdenb Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: good (used), Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, gas solenoid valve -Manufacturer: Kromschröder, gas solenoid valve -Type: MK 5 R3 B2891 Kodpfx Afsgh Dwvsdonb -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm -Weight: 7 kg

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Knedpfx Aezpbazjfdob Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: used, machine/vehicle number: 19751, Valve air-water TR 618A screw-on 51MSW 15.7 mm straight Alligator 544.503 / RAL 7040 >38" window grey Complete wheel consisting of: 420/85 R 38 Ceat Farmax / R85 144 A8/144 B TL Disc wheel: 1 x 15 X 38/W GRA ET-10 S=15 m 1 x LK / 8/203.2/149.8/2 Knsdpjr Hni Sofx Afdjb

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm Kedpfxewc Ri Io Afdonb RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm Knodpfx Asrfw Ikefdsb 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg