Used Eckert Jantar 2 Mit Autom Gaskonsole for sale (85,254)

Condition: new, Grundfos CM3-2 A-R-I-V-AQQV centrifugal pump with MG71A-F-B-CMS1B pump motor, serial number: 2246, unused, 100% functional, scope of delivery as shown in the photos. Nedpfxezg Sbwo Aiqjld

Condition: used, According to our "General Terms and Conditions of Business" and without any guarantee or warranty, we are pleased to offer you the following vehicle today, subject to prior sale, errors, and typing mistakes: Craiova IH Wheeled Excavator Year of manufacture: 1978 (estimated) Hydraulic stabilizers front and rear (2 each) Engine runs Hydraulics must be filled with oil and made operational, but are functional Rotary servo 2 clamshell grabs Rotes Banner Döbeln, manufactured in 1974 Tyres 60-80% Rear axle steering Front axle drive Price: € 5,500.00 (VAT not deductible) All details provided without any guarantee or warranty. Our General Terms and Conditions of Business apply. The place of jurisdiction for both parties for disputes up to a value of € 50,000.00 is the Amtsgericht Ludwigslust; for disputes above this value, the Landgericht Schwerin. Subject to prior sale, errors, and typing mistakes. Nlodpszk Srwefx Aiqsd

Condition: new, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Krone SZK 18 eLB41-LI Dry Liner Box Trailer Basic Information - Model: SZK 18 eLB41-LI - Fifth-wheel height unloaded: 1,150 mm Weights (Approval / Technical) - Kingpin load: 12,000 kg / 12,000 kg - Axle load: 18,000 kg / 18,000 kg - Gross vehicle weight: 30,000 kg / 30,000 kg Dimensions - Body dimensions: 13,620 x 2,480 mm interior length - Internal height: 2,715 mm - Rear door clearance height: 2,650 mm - Unladen vehicle height: approx. 4,000 mm - Front body height: 100 mm (including floor) Axles - 2 axles, each with 9,000 kg load capacity - KRONE axles with air suspension and disc brakes - Brake disc diameter: 430 mm - Axle spacing: 8,135 mm - Wheelbase: 1,310 mm - Warranty: 6 years with unlimited mileage Tyres & Rims - 4x 385/65 R 22.5 M+S tyres - KRONE Smart Tyre Monitoring - No spare wheel Brake System - EBS 2S/2M with ABS - Spring-loaded parking brake - Brake system: WABCO Box Body - Closed body design - Sidewalls: 28 mm sandwich panels, steel outer layer, insulated - Roof: 30 mm sandwich panel, PU core, insulated - Internal side forklift protection: 320 mm high - Front wall: steel plate with 9 mm birch plywood lining inside Nedeym Ha Aepfx Aiqjld - Rear wall: steel container door with seal - LED light strip on the left in the cargo area - 2 ventilation grilles per side - 2 rows of load securing rails (800 mm / 1,600 mm above floor) Floor - 30 mm waterproof plywood floor (bonded) - Strength according to EN 283 for up to 7,000 kg forklift axle load Lighting - All-LED lighting - Full-LED multifunction rear lights (Hella Gen.2) - LED side marker lights with indicator function - Outline and brake lights at rear upper corner Certificates - EN 12642 Code XL - VDI 2700 Beverage Transport - Daimler Directive 9.5 - CEMT/CM certificate Paintwork - Chassis: RAL 9005 Deep Black - Box body: KRONE White - Roof: RAL 9010 Pure White

Condition: ready for operation (used), Year of construction: 2011, overall weight: 235 kg, load capacity: 16 kg, arm reach: 1,611 mm, number of axes: 6, This 6-axis KUKA KR 16-2 mit KRC 4 was manufactured in 2011. It features a load capacity of 16 kg and a range of 1611 mm, making it suitable for various applications. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 16-2 mit KRC 4 robot arm we have for sale. Contact us for further details. • Machine Weight: 235 kg • Rated Payload (Load): 16 KG Nodpfx Aiezficpoqjld • Max Reach (Range): 1611 MM • Controller Model: KRC4

Condition: ready for operation (used), Year of construction: 2012, load capacity: 16 kg, arm reach: 3,102 mm, number of axes: 6, This 6-axis KUKA KR 30L16-2 mit KRC 4 was manufactured in 2012. It features a reach of 3,102 mm and a payload capacity of 16 kg, making it suitable for various robotic handling applications. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30L16-2 mit KRC 4 robot arm we have for sale. Contact us for further details. • 3 units available • Application Type: Robotic Handling / Material Handling Robot • Controller: KRC 4 • Payload Capacity: 16 kg • Max Handling Weight: 16 kg Nlodjzd Tl Ejpfx Aiqod • Reach: 3,102 mm • Weight: 700 kg

Condition: ready for operation (used), Year of construction: 2017, overall weight: 700 kg, load capacity: 16 kg, arm reach: 3,102 mm, number of axes: 6, This 6-axis KUKA KR 30L16-2 mit KRC 4 was manufactured in 2017. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30L16-2 mit KRC 4 robot arm we have for sale. Contact us for further details. • Application Type:Robotic Handling / Material Handling Robot • Controller: KRC 4 • Payload Capacity: 16 kg Nedszd Taispfx Aiqold • Max Handling Weight: 16 kg • Reach: 3,102 mm • Weight: 700 kg

Condition: ready for operation (used), Year of construction: 2013, overall weight: 700 kg, load capacity: 16 kg, arm reach: 3,102 mm, number of axes: 6, This 6-axis KUKA KR 30L16-2 mit KRC 4 was manufactured in 2013. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30L16-2 mit KRC 4 robot arm we have for sale. Contact us for further details. • Application Type: Robotic Handling / Material Handling Robot • Controller: KRC 4 • Payload Capacity: 16 kg • Max Handling Weight: 16 kg • Reach: 3,102 mm Nljdpfx Aiezd Sx Reqjd • Weight: 700 kg

Condition: used, machine/vehicle number: 9268, Year of construction: 2002, Dieses Angebot stellt keine verbindliches Angebot dar und kann Fehler enthalten. Keine Gewähr auf alle Angaben. Dieses Angebot stellt keine verbindliches Angebot dar und kann Fehler enthalten. Keine Gewähr auf alle Angaben. Nledszcbntepfx Aiqod

Condition: used, maximum load weight: 19,740 kg, overall weight: 28,000 kg, axle configuration: 2 axles, first registration: 12/1999, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,630 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until completion, subject to errors, typographical errors, and prior sale: Nedpfxjzir S Us Aiqeld Spier 2-axle double-deck box trailer with beams (Vehicle 159) First registration: 16.12.1999 Type: SGL 290 Permissible gross vehicle weight: 28,000 kg Unladen weight: 6,590 kg Payload: 19,740 kg Overall length: 13,800 mm Overall width: 2,550 mm Overall height: 4,000 mm Interior length: approx. 13,450 mm Interior width: approx. 2,480 mm Interior height: approx. 2,630 mm Double deck with 13 beams 12 x beam hole strips from top to bottom + 3 x stacked approx. 3 m in the rear area Reinforced floor Roller shutter door Air suspension with lifting and lowering function 2 x 12-ton 2-gear winch Chock 2 x LED reversing lights Tires: 385/65R22.5, 1) approx. 80/40%, 2) approx. 40/40% Ideal for storage, watertight Price: € 2,500.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to € 5,000.00 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, mileage: 1,800 km, first registration: 04/2020, overall weight: 9,000 kg, axle configuration: 2 axles, These front-mounted sweepers can be operated via the front PTO shaft. Of course, we can also accommodate your specific requirements, special requests, and additional optional equipment. The brush rollers are equipped with alternating plastic and wire brush discs as standard to achieve the best possible sweeping result, even with heavy and stubborn dirt. * Dücker FKM 2400 * with municipal mounting plate receiver * Device plate size 3 and 5 * Very little use and always stored in a hall * Working width 0°. 2,400 mm * Working width 15° 2,300 mm * Working width 30° 2,075 mm * Sweeper roller diameter: 600 mm * Hydraulically raise/lower Nlodpfeziudmsx Aiqsd * Hydraulically swivel right/left * 2x water tank * Water spray system * Support wheels * Support Made from a sturdy, torsion-resistant housing with double-walled construction. The sweeper roller is suspended and can be adjusted in height, with stepless control, and consists of disc brushes in plastic-wire, 600 mm diameter, and heavy-duty wheels, 250 mm diameter, directly attached to the housing. Working width: 2.4 m Overall width: 2.65 m Sweeper roller diameter: 600 mm Lifting device for front quick-change system: Device plate size 3 or 5, including cylinder Hydraulic drive, minimum oil flow at 180 bar: 40 l/min Weight: 580 kg Additionally equipped with: Hydraulic tilting of the brush to the right/left Water spray device in front of the sweeper brush Boundary lights LED and warning flags Switching valve, electric Financing is possible through our partner banks; we are happy to assist you. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is provided without guarantee. Subject to change, prior sale, or errors. We strongly recommend and offer an inspection and examination so that no false impressions arise in the buyer regarding the condition and suitability. Inspections and examinations are possible at any time by prior arrangement and are expressly desired.

Condition: ready for operation (used), Fanuc A04B-0810-C403 pressure controller with Okaya R.A.V-781BYZ-2 overvoltage protection,used, small traces of use, 100% functional, scope of delivery according to photos Nsdpfxjmq H Swo Aiqeld

Condition: ready for operation (used), Leistritz 59692 001 L3MF 45/117 pump with EMK KF160M2-2-PTC motor, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Nledpfx Aek Axb Rsiqod

Condition: ready for operation (used), Brinkmann SFL1150/330-CM3+1841 pump with motor SN:1116020423 - 41314/2-IP 55F, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Njdpfet Sbmgox Aiqsld

Condition: ready for operation (used), Siemens 1FT5066-0AF71-2 F AC-VSA motor SN: EE380713001002 with 1FU1050-6NF, 13.3 mV/min tacho and Heidenhain ROD 426 1000 03S12-03 encoder, ID: 295 434-N5, used, in good condition, 100% functional, delivery as shown in the photos. Nsdpfey Npl Usx Aiqeld

Condition: ready for operation (used), Siemens 1FT5102-0AC71-2 - Z motor SN: E1W68186402001 with 1FU1050-6GC, 20.0 m/min, used, in good condition, 100% functional, scope of delivery as per photos. Nlodpfxoy Sdtlj Aiqed

Condition: new, Siemens 1FT5064-0AG71-2 - Z permanent magnet motor SN: EF861126002016 with encoder system - ROD 320.002, Z = see nameplate, unused in opened original packaging, 100% functional, scope of delivery as per photos Njdpfotuhy Hox Aiqeld

Condition: ready for operation (used), Siemens 1FT5066-0AF71-2-Z 3-phase permanent magnet motor with Heidenhain ROD 426.2010-2500, mounting hole spacing: 81 x 81 mm, drive shaft diameter: 19 mm, used, normal signs of wear, 100% functional. Nlodpfxji D Sgae Aiqod

Condition: ready for operation (used), Getriebebau Nord SK71L/8-2 engine with SK12063AZ-71L/8-2 gearbox SN: 201892085-100, used, good condition, 100% functional, scope of delivery as per photos Nedpfjt Rmztjx Aiqeld

Condition: ready for operation (used), Groschopp WK 1698109 motor with EPL64/2 gearbox, gear ratio i = 50, serial number as shown in the photo, mounting hole spacing: 37 x 37 mm, drive shaft diameter: 14 mm, used, normal signs of wear, 100% functional. Nljdpfx Aiji D H U Neqod

Condition: ready for operation (used), Serfilco EO 1 1/4CL5-DM1.0-DPA-ST-SX with VEM K21R 80 K 2 DOD FDS-SR/5334 motor, height 370 mm + motor 235 mm, top plate 355 x 250 mm, outer diameter of drain outlet 59 mm, used, in good condition, 100% functional. Nlsdpfx Aoi D N Nheiqed

Condition: ready for operation (used), Electro Adda FV71FE-8/2, 3-phase motor with Bonifiglioli bevel gear unit MVF 49/P (i=7), serial number as shown in the photo, mounting hole spacing: 63 x 63 mm, drive shaft diameter: 30 mm, used, normal signs of wear, 100% functional. Nodpfei D Htcsx Aiqeld

Condition: ready for operation (used), Siemens 1FT5066-0AF71-2-Z 3~ permanent magnet motor with Pfeffer + Partner RPL 20-1 H/VU gearbox, hole spacing of mounting holes: 85 x 85 mm, diameter of drive shaft: 32 mm, gear ratio i = 7, used, with significant signs of wear, 100% functional. Nljdpfx Asi D Sf Sjiqed

Condition: excellent (used), Year of construction: 1999, Counter: 34,552,033 Format (cm): 36x52 Dampening: conventional dampening Equipment / Additional information: with N&P (numbering & perforating) unit Nlsdpfx Aeyrfz Aoiqsd

Year of construction: 2024, condition: like new (used), functionality: fully functional, The Emmegi Rifila is a miter saw with a blade that moves from below, specifically designed for the precise cutting of aluminum profiles and sheets. Its robust construction ensures exact cuts with perfectly parallel profile sides. The machine can be equipped with roller conveyors to enable flexible use. The saw includes 2 new roller conveyors (see photos). - Precise cuts due to the stable machine structure - Versatile for use with profiles and sheets - Safety through an effective protective cover Nsdpfx Aoza Aafjiqjld - Easy operation with an adjustable stop and scale - Carbide-tipped saw blade, Ø 350 mm - Max. after-cut height 120 mm - Protective device for the cutting area - Lubrication system with micro-spray device - Motor: Self-braking three-phase motor - Motor power: 1.5 kW - 2 roller conveyors

Condition: used, first registration: 09/1991, overall weight: 500 kg, color: silver, gearing type: mechanical, suspension: other, Aluminum floor, new MOT/emissions test, first registration on 10.09.1991, 2 dog boxes, removable partition walls (lengthwise), raised roof above the boxes, aluminum floor, aluminum lid frame with aluminum lid, aluminum interior grille doors, ventilation flaps, aluminum support, display for all exterior doors, cylinder locks, hinges made of stainless steel, permissible total weight 500 kg. FOR US, THE CONDITION AND OVERALL IMPRESSION ARE DECISIVE; THE PRICE IS SECONDARY. Very well-maintained dog trailer with luggage rack and 2 separate dog boxes, including a new MOT and complete inspection. //*EXCHANGE, TRADE-IN, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information is without guarantee.* You can find more offers on our website: The description and specified data do not constitute a guarantee and are not binding. The purchase contract, which is concluded at the car dealership upon purchase of the vehicle, is binding. Errors and prior sale are reserved! Nedjy T I Suopfx Aiqsld