Used Elga Wire Electrode for sale (3,373)

Condition: used, Year of construction: 1970, für MK3 weight of the machine ca. 4 t Hedpfsztfzdox Aftjfl

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: LW 08.0169, Used Ruff LW-90 table winding machine with tailstock. Hodpfezzpqfox Aftofl Self-collection only – location: 4120 Neufelden, Austria.

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine, type PMS 11-4 G3, 3-phase DC version - specifically designed for welding aluminum sheets - rarely used, completely inspected and cleaned - fully functional, ready for demonstration - rated voltage 400V/50Hz - rated power 96 kVA - welding current 23 kA - connection cable cross-section 10 sq mm/phase - fuse rating 63A - arm reach 1050 mm (!!) - electrode arm diameter 60 mm - electrode holder diameter 30 mm - electrode force 600 daN - stroke 65+25 mm - electrode cone MK2 - control unit MPS 8043/1 from Harms & Wende with current ramp-up and pulse function - with operating manual Hfjdpfsh N Sc Esx Aftol - 2-stage foot switch according to UVV standards - main machine switch - pneumatic maintenance unit - weight approx. 830 kg - complete documentation with wiring diagram, compressed air circuit diagram, and cooling water circuit - VAT can be shown separately - delivery from warehouse in Dresden approx. 4 days within Germany - export may take longer! On-site commissioning is subject to a charge and will be billed according to the actual effort involved. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment.

Condition: excellent (used), Double wire straightener, with two straightening units. 1x ER7-9.0 1x ER5-9.0 Straightening range (wire range) 7.0 – 9.0 mm Overall length approx. 500 mm Weight 18 kg Hfodpfezz S N Dsx Aftol Condition: very good

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Hfjdpfezy Hhxox Aftsl Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 396-900-115-0108, workpiece weight (max.): 2,890 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, workpiece height (max.): 250 mm, workpiece width (max.): 900 mm, workpiece length (max.): 680 mm, Ορίστε μια σύντομη, επαγγελματική και περιεκτική περιγραφή που μπορείς να χρησιμοποιήσεις: GF AgieCharmilles CUT 20 P – Wire EDM Machine Well-maintained AgieCharmilles CUT 20 P wire erosion machine in excellent working condition. Features the Performance Package for higher cutting speeds and superior surface finish. Year of Manufacture: 2011 Travels (X / Y / Z): 350 x 250 x 250 mm Max. Workpiece Dimensions: 900 x 680 x 250 mm Max. Workpiece Weight: 400 kg Features: Automatic Wire Threading (AWT), IPG Generator, integrated dielectric filtration unit. Hedpfx Afozncqljtefl Ready for inspection under power.

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M10L/8705, Offer Number: M10L/8705 Machinetype: boltmaker 4 die 4 blow Info: bushing cut-off , PKO , IFO Make: NEDSCHROEF Type: BS3 Constr. year: 1978/2017 diameter range: 6-10 mm number of dies: 4 number of stations (incl. cut off): 7 Hfsdpfx Afswi Su Sotsl cutting length: 75 mm shaft length under head: 50 mm output - pieces/min: 285 max. width acros flats: 17 max. thread length: 50 mm press power: 110 to Location: In our warehouse

Condition: used, High-precision Takatori MWS-610 Multi Wire Saw for Semiconductor & Crystal SlicingFor sale is a professional, high-performance Japanese multi-wire saw Takatori MWS-610, specifically designed for ultra-thin, high-precision slicing of hard and brittle materials.Key Applications & Materials:Semiconductor industry: Silicon (Si), Silicon Carbide (SiC), Gallium Nitride (GaN) wafer production. Hedozz Hk Ajpfx Aftjfl

Condition: used, Year of construction: 1998, machine/vehicle number: 8.2259/355138, This Charmilles Technology wire erosion machine is being auctioned off online as part of our industrial auction / machine auction follow-up auction by J&S GmbH Automotive Technology - Machine Park. Hedpozyf R Eefx Aftjfl You can find this and many other items on our platform.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 701, The electrode drying oven SET-50/4 features 4 shelves, each with 5 separate compartments for electrodes, allowing for organized storage of various electrode types. The capacity of the device is sufficient for the contents of approximately 50 packages of stick electrodes. The housing and door are double-walled and well-insulated. The device has a thermostat with an indicator light, allowing the drying temperature to be adjusted continuously up to 400 °C. The interior, including the shelves, is made entirely of stainless steel. Upon request, we can include an analog thermometer with a display range of 0-400 °C. Thanks to all these features, the SET-50 is the ideal device for stationary applications. It is delivered without a power cable and plug. Capacity: up to 250 kg of electrodes Dimensions in mm: 1080 x 740 x 810 Weight: 65 kg Temperature: 400 °C Hfsdpfxez Ahcis Aftel Heating power: 3700 watts Input voltage: 230 V 50 Hz

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101D1902, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 300 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 775 mm, Equipment: documentation/manual, We are selling a wire erosion machine. Condition: used, fully functional Technical specifications: Manufacturer: FANUC Model: Alpha 1iD CNC control: FANUC 310i-WA Operation: Touchscreen; Editor Manual control panel: yes Travel ranges: X 600 mm × Y 400 mm × Z 310 mm U/V axes: ±100 mm (total travel of 200 mm) Wire diameter: 0.10–0.30 mm Max. workpiece size: approx. 1,050 × 775 × 300 mm Automatic wire threading (AWT) Machining under water; full immersion machine Ethernet and USB connection Hsdpfx Afozlg Agjtsfl The FANUC Alpha 1iD offers reliability, very good cutting quality, and low maintenance requirements. High-quality clamping devices, Hirschmann System 4000, can also be included. The machine can be inspected and tested by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,200 mm, This 3-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Table size: 850 mm x 650 mm • Wear parts, some drive motors, and bearings have been replaced over the years. • Integrated c-axis and integrated electrode magazine. Hfsdpfsx D N Hrjx Aftsl Dimensions Machine Depth 1800 mm

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1500-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords Hfodothigrepfx Aftsl - starter kit of protective lenses and nozzles Specifications - Laser source output 1500 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Hfodpfethit Eox Aftjl Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, You get two machines for the price of one. One is fully functional and in good condition for its age, equipped with a collecting system (sliding slats). The other can be made functional again with minimal effort, but the new owner can also use it for spare parts (all electrical cards are intact; the pump system and wiring harness require repair). The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision of the German Matra machine tool engineering. Hjdpfezcww Rsx Aftjfl

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Wire EDM machine type Agiecut Classic 2s, year of manufacture 2004, for sale. Hedpfjy Snm Njx Aftefl The machine is in good condition and operates flawlessly. An inspection under power is gladly possible. A video is also available upon request. Technical machine data: Agiecut Classic 2S • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIECUT CLASSIC 2S • Year of manufacture: 2004 (with CE marking) • Serial number (unit): 663 • Equipment list No.: C32.102 • Circuit diagram No.: 629.412 Electrical connection values & performance • Voltage: 3 x 400 V • Frequency: 50 Hz • Power: 9 kVA • Rated current: 14 A • Short-circuit current: 10K Weight & components • Total weight: 2,580 kg • Subcomponents (serial numbers): o MC 2S CLASSIC (unit): Serial 663 / Equipment List 002.354 o DA CLASSIC 2S: Serial 659 / Equipment List 033.804 o CABINET CLASSIC 2S (control cabinet): Serial 665 / Equipment List 028.254 Loading can be arranged by us upon agreement. If you have any questions, please feel free to contact us at any time.

Condition: excellent (used), Year of construction: 2003, Sodick AQ535L wire EDM machine Year: 2007 5-axis Technical details: X-axis travel of 550 mm Y-axis travel of 350 mm Z-axis travel of 300 mm U/V axis: 80/80 mm Work table size is 790 x 500 mm, Maximum workpiece weight capacity of 800 kg Work tank dimensions (W x D): 1100 x 720 mm Distance from floor to table top: 1005 mm Workpiece capacity: Maximum workpiece height: 290 mm Wire system: • Taper angle: 20° / 80 mm • Wire tension: 300 g to 2300 g Hsdpfx Aszqzzneftsfl • Max wire feed speed: 250 mm/sec • Max wire spool weight: 6 kg • Dielectric tank: • External dimensions (W x D x H): 640 x 2400 x 1843 mm • Empty weight: 350 kg • Capacity: 730 L

Year of construction: 1970, condition: ready for operation (used), Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible. Hjdpfx Afozqu Hqetjfl

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 591.063.050.0035, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, Professional Wire EDM Machine AgieCharmilles CUT 300 (2012) Premium wire electrical discharge machining center from GF AgieCharmilles, ideal for precision manufacturing, tool & die making, and aerospace applications. Hjdjwwq S Sepfx Aftjfl

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 591.063.002.0050, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, The AgieCharmilles CUT 300 Sp is a high-performance and versatile wire EDM, ideal for precision manufacturing of molds, prototypes, and complex components, offering: * extensive spatial travels * large dielectric capacity Hfedpfx Afewwrk Nstsl * ability for taper cutting * robust CNC control system.

Condition: used, Year of construction: 1998, Control FANUC Series 16-W x-axis 320 mm y-axis 220 mm Hfedpfx Afszrh N Ujtel z-axis 180 mm u-axis 120 mm v-axis 120 mm rapid traverse (x) 900 mm/min rapid traverse (y) 900 mm/min rapid traverse (z) 450 mm/min rapid traverse (u) 450 mm/min rapid traverse (v) 450 mm/min max. workpiece weight 250 kg weight of the machine ca. 1,5 t connected load 11 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, This listing is for a Elga Purelab Option Water Purification System with 40l Tank. The unit is in full working condition and is ready for immediate release. Optimize your laboratory's water quality with the Elga Purelab Option Water Purification System, designed to deliver high-quality Type 2 water for various laboratory applications. Key Features: Type 2 Water Purification System: Perfect for general laboratory use and feeding Type 1 water purification systems, ensuring you have reliable water quality for various experiments. 40L Storage Tank: Equipped with a spacious 40L tank, providing ample storage for your purified water needs, minimizing the need for frequent refills. Advanced UV Treatment: Features a dual-wavelength UV lamp (185/254 nm) that facilitates photo-oxidation of feed water, significantly reducing Total Organic Carbon (TOC) levels to less than 30 parts per billion (ppb)—ideal for sensitive applications. High-Quality Deionization: Utilizes a deionization cartridge to achieve resistivity levels ranging from 1 to 10 , ensuring high purity water suitable for critical lab tasks. Built-in Boost Pump: The integrated boost pump facilitates the recirculation of treated water, enhancing the system's efficiency and maintaining water quality over time. Compact and User-Friendly Design: Designed for ease of use, the system’s compact footprint makes it suitable for various lab setups without compromising space. Specifications: Water Flow Rate: Capable of delivering up to 7.5 liters per hour (LPH), ensuring a steady supply of purified water for your laboratory requirements. Resistivity Levels: Achieves resistivity ranging from 1 to 10 megohm-cm, providing high-quality water suitable for sensitive analytical applications. TOC Reduction Performance: Effectively reduces TOC levels to less than 30 ppb, critical for applications requiring ultra-pure water. Hodpoxxy U Nsfx Aftsfl UV Lamp Specifications: The dual-wavelength UV lamp (185/254 nm) not only assists in TOC reduction but also helps in the disinfection of water, enhancing its overall quality.

Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690 - Maximum part dimension 1380 x 1000 x 400 - Travels X,Y,Z 800 x 600 x 600 x 400 - Travels U,V ±30 - Maximum demoulding ±15/110 - Global protection by EC-EMC cabinet - Fixed work table - Integrated monobloc flange table - Guaranteed thermal stability; polymer concrete - 5 axes controlled by numerical control (XYUVZ) - Linear glass rulers on all axes Hodpfx Ajwz Iuxjftefl - Axis protection by anti-collision system - Tilting up to ±30°. - ThermoCut (automatic threading and rethreading) - Bonina thread holder 4, 8 and 16Kg - Filtration system: 2 filters (29m2) - Water/water heat exchanger - Automatic regulation of deionization with cylinder - Numerical control CT Millenium (Fanuc) - 12" TFT color graphic touch screen - Hard disk 10GB - Remote control - Machining strategy PROFIL-EXPERT - Integrated CT-EXPERT technology - Automatic adaption of the PILOT-EXPERT generator - Digital generator control - Autorestart - Self-diagnosis - Integrated Ethernet card Additionals: Contact electrode Pinch roller Chiller Spare motor for U/V axis

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection Hfedevg Rh Topfx Aftjl - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Condition: ready for operation (used), Year of construction: 2001, operating hours: 11,472 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: System 16iM, spindle speed (max.): 30,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details. • Electrical • Operating voltage: 400 V • Frequency: 50 Hz • Phases: 3-phase • Nominal current: 90 A • Recommended supply fuse: 100 A (slow-blow/time delay) • Supply cable size: 35 mm² copper • Wiring diagram: 4036 EP 0024 • CNC / Control • Microcomputer control: Professional A • CNC: FANUC System 16iM • DNC connection: Data server interface • Integrated IC memory: 160 MB • Interpolation: NURBS • Programs: 125 main and sub-programs storable simultaneously • Coordinate input: Polar coordinate input available • High-speed contour control: Super-GI • Processor: RISC for fast 3D machining calculations • Mechanical construction • Machine frame: Cast iron welded construction • Axes layout: Cross table system (X, Y); Z-axis console type • Guides: Preloaded ball linear guideways • Thermal stability: Oil circulation cooling for spindle temperature stabilization • Axis performance • Rapid traverse: up to 16,000 mm/min • Simultaneous machining: 3-axis contour milling • Contour accuracy: High (Super-GI control) • Spindle • Tool holder: HSK-A63F • Torque: 21 Nm • Front bearing diameter: 55 mm • Tool system Hfjdeyvq Drjpfx Aftel • Tool magazine capacity: 15 tools • Tool breakage monitoring: Yes • Automatic tool changing: Yes • Applications / capabilities • Graphite electrode milling (incl. long tools) • Copper electrode machining • Hardened steel milling • Designed for automatic production sequences • Optimized surface finish capability • Contour-accurate 3D milling capability • Standard/integrated systems • Graphite dust extraction system • Dust removal via: air blast, spindle suction, tool suction • Filter system with automatic collection container • Minimum quantity lubrication (MQL) • Designed for high-speed graphite machining • Suitable for hardened mold cores