Used Equiptec Es 1200 for sale (11,708)

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch Rsdpfx Ajyz E T Sedgju * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: good (used), The scope of delivery includes: 01x back wall grille, used Rsdpslucaqofx Adgsu material color: similar beige total width: approx. 1.200 mm total height: approx. 1.100 mm Mesh size (outside): approx. 93 x 53 mm Mesh width (inside): approx. 88 x 48 mm Frame profile dim.: L-profile 30 x 30 mm The back wall grids are rusty, partly the frame profile is damaged, see pictures.

Condition: good (used), PLC control, electronic control card, control card, output card, controller Rsdohy Rpmopfx Adgeu -Manufacturer: Siemens, control card Simatic S5 -Type: PC 612 F B1200 6ES5281-4UA12 -Dimensions: 275/200/H50 mm -Weight: 0.5 kg

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module, control unit -Manufacturer: Robosoft, control unit from press brake HACO type PPES 30135 -Type: 411-1084 / 412-0112 / 412-0094 see photo nameplate -Dimensions: 295/190/H145 mm Rodpfxerdil Re Adgou -Weight: 2.5 kg.

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear Redsx A Uc Ajpfx Adgou • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion Redpfoxaablsx Adgeu - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Condition: excellent (used), Hydromotor for screw cylinder Injection unit size ES3550 Rjdpfsfnqagex Adgsu Hägglunds Drives Type CA50 20 2 0 0 N 004

Condition: ready for operation (used), Siemens C98043-A1200-L 107 control card SN:Q69004, used, in good preserved condition, 100% functional, scope of delivery as per photos. Rsdpfxsxlwq Ij Adgou

Condition: new, Brinkmann TS 21/300-MV+211 submersible pump SN:0412003832-92658001 ,unused, 100% functional, scope of delivery as per photos Rjdpfeur A Uxox Adgeu

Condition: ready for operation (used), DMU SK40 motor spindle with variable speed from 20-12000 rpm. SN: 10222292 r, used, heavy signs of wear, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Redok Ru Dkepfx Adgou

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Gorzow Wielkopolski. Conditions of delivery Cost of delivery Client cover startup type negotiated Description Rjdpfx Adocudizjgeu Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: Redpewx Dctsfx Adgeu * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Rodpfjw U H Sbsx Adgju Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: used, maximum load weight: 32,610 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 11/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete selection of vehicles with immediately and short-term available units on our website. Sample from the equipment list. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with through-profile cross members, designed for high point loads. Coupling Device: * 2-inch king pin Underrun Protection: * Bolted version, compliant with EC regulations Side Impact Protection: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right hand side (FR) Axles: * 3 x 9 t air suspension axle assemblies * Disc brakes * Brand: Gigant Brake System: * Dual-line compressed air brake system compliant with EC regulations, equipped with EBS and RSS, automatic load-dependent control * Spring brake cylinders as parking brake * Foolproof coupling heads permanently mounted on front crossmember, without connection line to tractor unit * Brand: Wabco Tyres: * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier: * 1 piece double basket with mounting hardware for one spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * Drill holes for tie-down straps approximately every 500 mm on the outer frame Front Wall: * Reinforced steel construction, fixed * Interior lined with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set in outer frame Lighting System: * EC compliant, 24 Volt, with multi-chamber lamps * LED side marker lights * LED front position lights (white) Redpfxowyhy Es Adgeu * LED rear outline marker lights * Number plate lights * 1x 15-pin and 2x 7-pin plug connectors on front crossmember Paintwork: * Chassis and front wall sand-blasted, primed and painted in single color * Chassis: RAL 3002 carmine red * SSV: aluminium anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Wheels: silver Including Special Accessories: * First axle liftable with fully automatic, load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets crosswise to loading area * 20 stakes made of galvanized pipe 80/50, total length approx. 1,000 mm * Storage magazine for 20 plug-in stakes on inner front wall * Twistlocks for 1 x 40’ and 2 x 20’ containers, flush-mounted at the rear * Twistlocks for 1 x 20’ container in middle position * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: new, Year of construction: 2024, overall grade 1-5 (1 bad, 5 like new): 5/5 certificates: CE, TÜV Manual/Mechanical quick coupler Additional hydraulics Quick change Rubber tracks Standard bucket Hammer function Mini digger Rhinoceros xn12-8 Year 2023 Equipped with strong 3 cyl Kubota diesel 2x excavator bucket + adjustable undercarriage Extra option: Mechanical switch Thumb Ripper 1 year warranty on parts, excluding wear and tear Lease also possible, ask for the conditions Total weight gvw: 1.200 kg Motor: Kubota 3 cylinder Engine manufacturer: Kubota Production country: China Rsdpexb Epwofx Adgsu General grade (1 min - 5 max): 5/5 Gross weight: 1.200 kg Engine: Kubota 3 cylinder

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 8,000 kg, type of input current: AC, Equipment: documentation/manual, Curd pre-pressing vat with a capacity of 12,000 litres and filling station cheese moulds from Tetra Pak Tebel. Year of manufacture 1999. In good condition, but with obsolete automation/PCL. We can provide PLC replacement and refurbishment on request. Available to visit. Documentation available. Rsdpjulnrvefx Adgeu

Condition: not inspected (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 71267, total width: 500 mm, total length: 500 mm, total height: 500 mm, overall weight: 20 kg, TECHNICAL DETAILS Measuring volume: 1,200 mm Accuracy: 0.015 mm Redpfxsy Tm Uze Adgeu MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): approx. 500 x 500 x 500 mm Weight approx.: 20 kg EQUIPMENT Laptop and software (completeness not guaranteed) Transport case Note: The red base on which the laptop sits is not included in the offer.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, spindle speed (max.): 3,200 rpm, overall weight: 6,500 kg, controller model: U-10L, TECHNICAL DETAILS Maximum turning diameter: 210 mm Rsdpfx Aoy S Sytjdgeu Maximum turning length: 500 mm X-axis travel: 155 mm Z-axis travel: 520 mm Spindle speed: 3,200 rpm MACHINE DETAILS Control system: U-10L Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,900 x 1,700 mm Total weight: 6,500 kg EQUIPMENT Documentation/Manual Adjustable spindle speed Parts catcher Touch probe V12 turret VDI 30 (all powered) Manual tailstock Chip conveyor Coolant pump Bar loader Samsys MUS-3000, year 2007 SMW chuck KNCS-N210-52

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 127-01204, functionality: fully functional, power: 7.8 kW (10.61 HP), spindle diameter: 40 mm, pivoting range: 45 °, table width: 450 mm, table length: 2,680 mm, TECHNICAL DETAILS Table length: 2,680 mm Table width: 450 mm Tilting spindle: Automatic Maximum spindle tilt: 45° Spindle diameter: 40 mm Minimum spindle speed: 3,000 rpm Spindle speed control: Stepped Rjdpjy Tniyofx Adgju MACHINE DETAILS Main motor power: 7.8 kW Connection voltage: 400 V Connection current: 16 A Dimensions & Weight Transport dimensions (L x W x H): 2,680 x 1,200 x 2,200 mm Transport weight: 950 kg Feeding device Manufacturer: Masterwood Model: Euromeo Number of wheels: 4 Number of speeds: 2 Guide manufacturer: Aigner

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Rodsy T Eb Topfx Adgsu Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Lifting capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CAN bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Clamping range: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Lifting capacity: 6,000 kg Double clamp bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in a robust and clean welded construction Splayed clamp arms mounted rotatably With hydraulic cylinders, required valves, pipes, and fittings Including oil pressure manometer and connection hoses to the rotator Additionally: one pressure gauge mounted 180° opposed to the standard manometer LIFTING ARM & EXTENSION TECHNICAL DETAILS Extension: 1.6–2.1 m Lifting capacity: 8,000 kg at an outreach of 1.6–2.1 m EQUIPMENT 1 piece forklift lifting arm, twin beam, with endless rotator and pendulum suspension Including connection hoses to forklift 1 piece hydraulic extension with telescopic cylinder 1 stabilizer (2 pcs) for pendulum motion compensation Integrated side shifter in slide guides, travel: 250 mm RADIO PRESSURE MONITORING (Clamping Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC system: Electronic control with 7" touch screen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior mirrors on fender (high) Turbo II heavy-duty air filter Additional hydraulic functions Quick couplings on the fork carriage Accumulator/vibration damper 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heating Additional LED headlights, 2 × on the mast Reversing alarm LED beacon Electrical cables over the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with RPM increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Movable A4 writing pad LED reading lamp Diesel parking heater + engine water heater Sun visor (roof/front) Panorama rearview mirror Preparation for attachments from other manufacturers Rsdey T Edhopfx Adgeu Central lubrication base, 14 points

Condition: used, Year of construction: 1973, Liebherr L-1200 (Up to module 25) Table : 1200mm Rodpfozalyzjx Adgeu

Condition: excellent (used), functionality: fully functional, Locatelli MK-CC 1200 Turning Center Rodpfxoyxwpys Adgsu Turning length: 1200mm Automatic loading of stock material from a feeder 3 Duplomatic floating tool holders, guided by a template 3 upper tool holders with axial movement Option for face drilling in the material Machine control system modernized in 2023 Excellent condition

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 74800 € 1413.72 € 40 to 2050 mm Y1 / Y2 / X und R Achse 200 mm 1700 mm 350 mm 440 mm servomotorischer Spindela 180 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 2600 mm 1450 mm 2650 mm 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys Rjdpsynm A Hofx Adgou - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: used, Year of construction: 2013, functionality: fully functional, HTZ 1200 SP EXTREME 15 HORIZONTAL LOG BAND SAW for big logs • production year 2013 • max. log diameter: 1,5 m • 45 kW main motor with frequency converter • automatic, hydraulic blade tensioning • automatic pre-cutter • automatic board guiding device • max. length of logs 12 m Rjdpfsx Adlgsx Adgju • 8 pcs hydraulic clamp + 1 pc support • 1 pc lifting clamp for taper control • 3 pcs log turning device with left-right positioning • set of longitudinal rollers (3 pcs motorised, 1 pc simple) • automatic control • automatic, lifting belt conveyor for boards • dust extraction device • low working hours