Used Folding Machine - 16 Pages Cross Fold for sale (75,735)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Ppedpfx Ajzdn H Robheu Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 62000 € 1171.8 € 3100 mm 2 mm Hydraulisch 135 ° 5 kW 4370 mm 1770 mm 1790 mm WITH VERTICAL UPPER BEAM MOVEMENT FOR THE USE OF FLAT AND HIGH TOP RAILS hydraulic driven NC control for bending angle manual back gauge 600 mm sharp flat upper rail 45° (in one piece) mechanical crowning adjustment clamping force adjustment upper beam vertical according to CE rules Optionen: sectionet upper rail, height 100 mm Psdpfx Ajynnaasbhopu motorized back gauge, 800 mm with 2-axis touch control

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, working width: 720 mm, Equipment: compressor, Pallet stacker MBO MC Control system with independent control Double-sheet control Printing - vacuum pump Ppodpezhh Tfjfx Abheu

Condition: used, Year of construction: 2008, machine/vehicle number: 32063, functionality: fully functional, operating hours: 28,800 h, power: 42 kW (57.10 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, table length: 6,100 mm, total length: 8,000 mm, total width: 3,200 mm, total height: 3,800 mm, overall weight: 35,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, For sale is a powerful and reliable CNC press brake, type LVD PPEB 320/61, ideal for precise bending operations in sheet metal processing. Manufacturer: LVD Model: PPEB 320/61 Control: CNC Design: Robust, industrial design Suitable for: Heavy-duty and large-format bending operations Technical data: CNC-controlled back gauges Hydraulic upper and lower tool clamping system Safety equipment in accordance with industrial standards 5 axes Press force: 320 t Bending length: 6,100 mm Frame width: approx. 5,050 mm Stroke: approx. 250 mm Installation height (table–ram): approx. 500 – 570 mm Condition: The machine is in used, operational condition. Regular maintenance has been performed. Inspection under power is possible by arrangement. Application areas: Steel and metal construction Mechanical engineering Series and single-part production Production of large-format sheet metal parts Advantages: High press force for demanding applications Large working length for a wide range of applications Proven LVD quality and reliability Precise CNC control for reproducible results Accessories: Many tools and dies, see PDF document Sales conditions: Price applies ex foundation Pjdpfx Aszhtlgsbhopu Dismantling, removal, loading and transport are the responsibility of the buyer Inspection possible by arrangement Delivery according to EXW (ex works)

Condition: new, sheet width 1000 mm plate thickness 1,0 mm distance between columns 1030 mm daylight opening 80 mm 135 ° Ppjdpfezhn Uisx Abhsu total power requirement Handbetrieben weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,8 x 1,2 m

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm weight of the machine ca. 240 kg Ppsdsxbtrtspfx Abhou Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Condition: new, Year of construction: 2026, BIEGEMASTER double bender - Model XBend 6.1,25 Effective length: 6400 mm Pjdpfxovhc Dps Abhspu Bending capacity Steel 400 N/mm²: 1.25 mm V2A 600 N/mm²: 1.00 mm Aluminum 190 N/mm²: 2.00 mm Clamping capacity (closed seam): 0.5 mm steel Number of uprights: 4 pieces Driven upper bending joints: 4 pieces Driven bending joints bottom: 4 pieces Incl. touchscreen CNC control with automatic depth stop Incl. electric shears BIEGEMASTER Up- and Down- Bending machine - model XBend 6.1,25 Working length: 6400 mm Bending capacity steel 400 N/mm²: 1.25 mm stainless steel 600 N/mm²: 1.00 mm aluminum 190 N/mm²: 2.00 mm Hemming capacity (closed hem): 0.5 mm steel Stands + Tension Arms: 4 pcs. Driven linkage joints upper beam: 4 pcs. Driven linkage joints down beam: 4 pcs. Incl. touchscreen control and automatic back-gauge Incl. electric cutter

Condition: good (used), Year of construction: 2007, Bograma TA 15 sheet feeder max. 15,000 cycles/h Pjdpfx Aeyuixdebhepu Mobile, height-adjustable

Condition: good (used), Year of construction: 2007, Pick & Place machine including HHS hot melt application system with 4-channel control unit and tank on a mobile cart Ppedpfx Asyuixkebheu

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Ppodpfszgu Tiox Abheu Technical data: - max. working width 2040 mm - max. material thickness at 40 kg/mm² tensile strength 4 mm - bending angle adjustable electronically, preselectable 0 - 135° - automatic sequential control for a complete working process - largest opening width / stroke of the upper beam 350 mm - height adjustment: - of the upper beam 100 mm - of the lower beam 100 mm - upper beam drive 400 V / 4 kW - bending beam drive 400 V / 4 kW - accessories: - motorized bending beam adjustment - rear stop adjustable with handwheel - electric foot pedal - space requirement with rear stop: - approx. W 3200 x H 1650 x D 2100 mm - weight approx. 4500 kg

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 060900759, WITH TRIMMER p/n: 2654000N Format: to SRA Ppjdpfxjxcaphj Abhju

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 97651504, WITH STAND Format (mm): max. 297 x 420 // min. 105 x 148 Pockets: 2 Folding arts : Letter fold, zigzag fold, double parallel, single fold Pjdpoy Hi Absfx Abhopu

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 27830/85, (PACKAGE INSERT FOR DRUGS) Ppjdpforigrpox Abhou Paper size range (cm) : max. 36x52 A3+ // min. 8x10 Pockets: 4 Knives: 1 Station: TS36/4J Feeder: FT36J Folding unit: KB36

Year of construction: 1969, condition: excellent (used), Format: A3 Pockets: 4 Sword: 1 Ppsdpfx Abjh Ek Rnsheu

Year of construction: 1996, condition: excellent (used), machine/vehicle number: L. 09/31, Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V Ppodpfehpyr Usx Abheu

Condition: used, Year of construction: 2021, functionality: fully functional, STC-Ref:G-571-0053 Ppedpjy R A Eqjfx Abhju Palamides Gamma 502-HO, Year: 2021 format: 510 x 240 mm equipped: - Dual-purpose cutting device - delivery with banding - pile height max. 12 cm - pile height min. 2 cm - speed 600 pck/hr per nutzen max. - paper size max. 51 x 24 cm - paper size min. 10,5 x 9,5 cm - total counter: 78.844 pcs

Condition: good (used), Creasing and folding machine Heidelberg Stahlfolder + Popp Maschinenbau SRT + MWS Machine in very good condition, ready for production. Like new. Year of production 2012. It was used in the production of invitations, photo book inserts and leaflets. Modular design allows for expansion, e.g. installation of marking printers. Ppjdpjy S Edfsfx Abheu Technical data: Paper format min 105 x 150 mm Paper format max 520 x 720 mm Feeding from a high stack Main and cross module with the possibility of installing creasing, perforating and cutting tools. Possibility of installing Heidelberg or Techni-Fold tools, Smooth speed regulation Becker compressor Double sheet sensor Electronic counter with packaging Set of inspection cameras.

Condition: used, Swivel bending machine HM, type KSM-5 / 2500 Manufacturer's No. 2004 / 3262, Year of manufacture 2004 Useful length 2520 mm Maximum sheet thickness 5 mm at 400 N/mm² Ppsdpfjzbhuwox Abhju Stroke of the upper ram 200 mm Adjustability of the bending ram 60 mm Motor power, upper ram 2.2 kW Motor power, bending ram 4 kW Mains connection 400 volts, 50 Hz - One-piece top beam 135° (installed) - Segmented gooseneck tool with mounting rail - Round tool for rounding up to 180° - Various bending tools for the bending ram - Adjustable bending angle via handwheel with clamping mechanism - Electric foot switches - Operating manual with electrical diagram available - Without rear stop Space requirement L x W x H 3900 x 1150 x 1560 mm Weight (machine) 4700 kg Weight (tools) 250 kg In good condition

Condition: used, functionality: fully functional, Year of construction: 2011, Working width: 6000 mm Sheet thickness: 1.5 mm steel Adjustable depth stop BMS touch control New customer service! Ppsdpozf I U Refx Abhju Available from mid-August 2026.

Condition: ready for operation (used), Year of construction: 1999, B&R Moll Marathon Folder Gluer / Pocket Folder Pjdpfxezgfzds Abhopu - ‘Dial-a-Feed’ hopper-type friction feeder with belts - ‘Quadraplex’ glue control unit with 4 channels for up to 4 gluing heads, featuring electronic cut-off control - Tape dispenser - Infeed table with plough folding devices and guides - Valco pre-melt unit with 2 heated hoses and hot-melt gluing heads - Upper and lower buckle plate folding station with segmented rollers - ‘Dial-a-Stack’ compression stream delivery conveyor - Includes accessories and manuals.

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. Pedpfxjwt Abwj Abhjpu The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Psdpsza D Eijfx Abhepu Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland Pjdjyrhtuepfx Abhepu 4010 mm 1.5 mm 2 mm 1.5 mm 5 5 1130 mm 180 mm 915 mm 3 kW 4550 mm 5200 mm 1435 mm 1980 mm 2700 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 5020 mm 1.5 mm 2 mm 1.5 mm Pedpfxsyrhths Abhepu 6 6 1130 mm 180 mm 915 mm 4 kW 6200 mm 1435 mm 1980 mm 3200 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 6200 mm 1.5 mm Ppedpoyrhtbsfx Abheu 2 mm 1.5 mm 7 7 1130 mm 180 mm 915 mm 4 kW 7380 mm 1435 mm 1980 mm 3700 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.