Used Freemantle Auto Sleever for sale (5,744)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MzCBP01, overall weight: 1,500 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,900 mm, space requirement length: 3,800 mm, space requirement width: 1,200 mm, space requirement height: 2,000 mm, power: 1.5 kW (2.04 HP), fuel type: electric, fuel consumption per hour: 20 l/h, operating pressure: 1 bar, pressure (max.): 0.6 bar, type of cooling: air, Equipment: CE marking, Automatic cartoning machine is suitable for pharmaceuticals, food, cosmetics, commodities etc.It can open box, fill products into box, then close box with tuck-in or hot-melt sealing. The machine is equipped with a series of sensors and automatic protective devices to assure the machine runs safely and effectively. It can connect with the Blister Machine, Pillow Packaging Machine, Shrink-Wrapper, etc., to form a Packaging Line. It is the best choice for mass production. Laodjxu Aamopfx Ackob

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Ledpfx Ajyrhppjcksab Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: used, axle configuration: 2 axles, loading space length: 13,800 mm, loading space width: 2,550 mm, loading space height: 780 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 205/65R17.5, color: grey, Equipment: ABS, = Further Options and Accessories = - Toolbox = Notes = New trailer, available for immediate delivery. Not yet registered. Fitted with: ROR axles with drum brakes. Air suspension with lifting and lowering valve. 4 x LED work lights. 2 x LED flash lights on rear frame. 4 sockets for width markers. Edge profile with 30 mm holes every 1000 mm. 2 x 10 units stake pockets in the side beam. Mounting bracket for winch. Rear storage compartment for ramps, Maximum ramp dimensions: 2400 x 470 x 150 mm Stainless steel toolbox 1000 x 350 x 500 mm. Hardwood floor. = Further Information = Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% Rear axle 2: Twin tires; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% Unladen weight: 6,600 kg Payload: 20,600 kg Gross vehicle weight: 27,200 kg Type number: LOW LOADER / AUTO-CARAVAN TRANSPORTER Laedpfx Aswbzi Necksb = Company Information = ALL PRICES ARE NET EXPORT PRICES, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We also speak Russian. We strive to provide accurate information but no rights can be derived from the published texts.

Condition: used, machine/vehicle number: 1, mileage: 4,65,000 km, power: 340 kW (462.27 HP), first registration: 08/2016, fuel type: diesel, tire size: 315/80 r 22.5, axle configuration: 6x2, brakes: engine braking, gearing type: mechanical, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, parking heater, Used DAF CF 460 truck, 3-side tipper, 3 axles 6X2, year 2016, long cab with 1 bed, ZF 16-speed manual transmission, climate, Webasto, engine brake, ABS, Euro 6, ADR, body length 6,200mm, wheelbase 4,200mm, total truck length 8,660mm, total weight 26.000Kg, load capacity 14,770Kg, 1st axle leaf suspension, 2nd+3rd axle air suspension, 3rd axle steerable + liftable, alloy wheels, sunshade, tires 80% tire size 315/80 R 22.5, windows + electric mirrors, radio, Km 465,000, good condition. Lajdpop Na Dlofx Acksb INFO ENG: Used truck DAF CF 460, 3-sided tipper, 3 axles 6X2, year 2016, long cabin with 1 bed, manual transmission ZF 16 gears, air conditioning, Webasto, engine brake, ABS, Euro 6, ADR, body length 6,200mm, wheelbase 4,200mm, total truck length 8,660mm, total weight 26,000Kg, capacity 14,770Kg, 1st axle leaf spring suspension, 2nd + 3rd axle air suspension, 3rd steering axle + liftable, alloy wheels, sun visor, 80% rubber, tire size 315/80 R 22.5, electric windows + mirrors, radio, Km 465,000, good condition.

Condition: excellent (used), GEA Autogrind frozen block grinder. With introlux belt indeed for full frozen blocks. s/s worm. Laodpfx Acjy E Ip Rokeb

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 76 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 38 mm/s, pressure: 150 bar, wall thickness: 4 mm, working length: 3,000 mm, Equipment: documentation/manual, 76x4mm Semi Automatic NC Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. Laodpfxovwg D Sj Acksb With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 99 mm/s, pressure: 130 bar, wall thickness: 2 mm, working length: 1,920 mm, Equipment: documentation/manual, 32x2mm Semi Automatic NC Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are B, BR, BRF. B series makes bending operation automatically. BR series makes bending and rotating operation automatically. BRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for BR and BRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Laedpfx Asvx D D Secksb Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, power: 8.2 kW (11.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 99 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 32x2mm Fully Automatic Tube Bending Machine Ledpovwg Hmsfx Ackoab The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 10-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: used, mileage: 6,74,571 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 275/70R22.5, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 10,100 mm, total width: 2,550 mm, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, General information Year of manufacture: 2018 Technical information Number of cylinders: 6 Engine capacity: 10.677 cc Front axle: Tyre size: 275/70R22.5; Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 12.155 kg Carrying capacity: 6.845 kg GVW: 19.000 kg Functional Max. number of cars: 9 Maintenance APK (MOT): tested until 08/2026 = Additional options and accessories = - Air suspension - Alcoa rims - PTO - Radio/CD player - Rotating beacon - Sleeper cab - Visor = Remarks = Trailer 91-WT-FG year of manufacture 2018 Groenewold Ecotrans X 152, VDI Certificate/ VDI certificate VDI 2700 8.1 Lasdjyzyklspfx Ackeb MOT valid until 4-8-2026 Total trailer weight 15,200 kg Unladen weight 7,600 kg Payload 7,600 kg Sliding drawbar trailer Toolbox Lane control Break assist HAN coupling Sideskirts

Condition: excellent (used), Kliklok Certiwrap C150 is for wrap around sleeves for ready meal trays, tubs and pots, either individually or in a variety of multi-pack configurations Ljdoy A Rliopfx Ackoab

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Laedetp H Eropfx Ackeb Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher AUTO is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Lasdpoc Spguofx Ackjb Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB AUTO compaction cycles Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Watkiss Auto SpineMaster’ book spine press. Item for sale: 1 x Watkiss Auto SpineMaster Lsdpfxoym Nlno Ackjab Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: hydraulics, Car carpet washing machine Condition New Brand NMTEH Type Compact water 2 L/min Manufacturer Warranty 1 Year Voltage 220 Model NMTEH Country/Region of Manufacture - Latvia Cord Type Corded Power: 2,5kW Item Weight ~200kg Auto carpet washing machine The difference from other devices - does not break the embedded plastics Cleans well fabric and rubber mats Cleans rubber carpets up to 20mm high edges Hard carpets that are thick. Ours is universal and will work a long time. Blow system Without water cleaning With water cleaning automatic heating system Water conection 3/4 Ledpsv A T Tqefx Ackeab

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, overall weight: 3,800 kg, Machine for filling and closing packages Brand Waldner Model Sleever Efficiency 3600 containers/h Lasdpfxovzw Hxs Acksb Power 25kW / 36A Year of production 2015

Condition: good (used), mileage: 1,88,964 km, power: 132 kW (179.47 HP), first registration: 12/2018, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,640 mm, fuel: diesel, fuel tank capacity: 75 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, Year of construction: 2018, Equipment: ABS, AdBlue, USB port, air conditioning, central locking, electric window regulation, electronic stability program (ESP), fog lights, full service history, onboard computer, power assisted steering, power mirror, soot filter, traction control, trailer coupling, = Further options and equipment = - Armrest - Exterior mirrors with indicator light - Automatically dimming interior rear-view mirror - AUX input - Cup holder - Passenger bench seat - Rev counter - Third brake light - Driver airbag - Height-adjustable driver’s seat - Remote central locking - Windscreen - Tinted glass - Height-adjustable steering wheel - Height-adjustable front seats - Foldable exterior mirrors - Air conditioning - Rear headrests - LED lighting - Centre armrest - Particulate filter - Radio/CD player - Disc brakes - Headlamp height adjustment - Immobiliser - Partition wall with window = Remarks = Laodpox Hqp Nsfx Ackjb Very well-maintained VW Crafter 2.0 TDI 180 hp tractor unit, automatic, first registered on 03.12.2018, 3 seats, Belgian registration, permissible total weight 7,000 kg, air conditioning, electric windows, 2 keys, service booklet. For further photos or information, please contact us by email at or by phone at . You can find our entire portfolio at = Additional information = General information Number of doors: 2 Cab: single Technical information Number of cylinders: 4 Engine capacity: 1,968 cc Front axle: steered Weights Unladen weight: 2,245 kg Payload: 4,755 kg Gross vehicle weight: 7,000 kg Functional Body manufacturer: DSG Condition Technical condition: good Optical condition: good Damage: none = Company information = Nidro Cars Holland is located in the centre of the country and is the right address for the purchase of your car, van or truck. The price stated is the 'internet take-away price'. For questions or a test drive, please contact us: LOOK FOR OUR ENTIRE STOCK AT All types of trade-ins welcome! (Our advertisements are compiled with the utmost care, but no rights can be derived from their contents).

Condition: new, Year of construction: 2026, The CORMAK Z5050 AUTO industrial drill is an advanced column drilling machine designed for professional metalworking in workshops and industrial plants. The machine offers high precision in drilling and tapping, as well as reliability even under intensive operation. The control system monitors operating parameters, preventing settings that could overload the mechanical components, which ensures safety and process stability. Key advantages of the CORMAK Z5050 AUTO drill Precise metal machining thanks to a stable Ø180 mm column and a heavy-duty worktable measuring 545 × 470 mm. Safe operation – the system limits the possibility of setting parameters that could endanger the machine’s mechanics. Automatic spindle feed providing uniform feed during drilling and tapping. Integrated cooling system extending tool life and improving machining quality. Intuitive operation – a large touchscreen allows control of spindle speed, drilling depth, and feed settings. High performance – drilling up to Ø50 mm, tapping up to M30, maximum quill stroke of 245 mm. Ergonomic design – motorized table lifting and automatic tool ejection increase comfort and productivity. Design and technology The CORMAK Z5050 AUTO column drill features a massive column and a solid worktable, ensuring stability during drilling and tapping of heavy workpieces. The MK5 taper spindle works with an automatic feed system, while precise spindle guidance minimizes vibrations and deviations. The cooling system supports efficiency and operational safety during long-term use. Applications The CORMAK Z5050 AUTO column drill is used in professional mechanical and manufacturing facilities, including: Drilling in steel, aluminum, and other metal materials. Precision tapping of structural components. Machine manufacturing and servicing, industrial workshops, and machining plants. Standard equipment Lodjyb A Rmjpfx Ackeab Touchscreen display SERVO feed motor Keyed drill chuck 3–16 mm / B18 Arbor MK5 / B18 Reduction sleeves MK5/4, MK4/3, MK3/2 Motorized table lifting Cooling system Tapping mode LED lighting Digital readout of spindle speed and drilling depth Safety guard Technical data Maximum drilling capacity: 50 mm Drilling capacity in cast iron: 60 mm Maximum tapping capacity: M30 Drill chuck: 3–16 mm / B18 Spindle taper: MK5 Minimum spindle speed: 50 rpm Maximum spindle speed: 2000 rpm Speed change: stepless (50–250 / 250–2000) Drive system: gearbox Automatic spindle feed – range: 0–765 mm/rev Drilling table tilt: –45° to +45° Max. spindle-to-column distance: 360 mm Max. spindle-to-table distance: 570 mm Max. spindle-to-base plate distance: 1170 mm Quill stroke: 245 mm Column diameter: 180 mm Table width: 545 mm Table depth: 470 mm T-slots: 14 mm Motor power S1 100%: 3.7 kW Voltage: 400 V Dimensions (W × D × H): 700 × 1050 × 2430 mm Weight: 760 kg

Condition: good (used), Auto cartoner in good condition. Lodpfx Asygln Eeckjab

Condition: new, Year of construction: 2026, functionality: fully functional, Pros: • comprehensive processing (cutting, drilling, milling, engraving) • stable structure guaranteeing maximum precision and reliability • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. Ljdpfx Asur N A Njckeab WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, Pros: • comprehensive processing (cutting, drilling, milling, engraving) • stable structure guaranteeing maximum precision and reliability • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: Ljdpfx Asin Ernsckjab - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. Lsdpfx Acegwct Dokjab We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3120x1100x1600 mm Weight 2000 kg Lajdpfx Asvz Hanocksb Total power requirement 6,4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3120x1100x1600 mm Weight 2000 kg Total power requirement 6,4 kw Laedovz E N Iopfx Ackjb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5600x1000x1550 mm Weight 2500 kg Lodpfxovz E E Aj Ackeab Total power requirement 6,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2450x820x1380 mm Ledpjvz E Eiofx Ackjab Weight 1500 kg Total power requirement 2,5 kw