Used Geberit Electrofusion Welding,Electrofitting for sale (5,525)

Condition: good (used), Year of construction: 2001, total height: 2,100 mm, total length: 3,200 mm, total width: 1,000 mm, overall weight: 12,000 kg, plate diameter: 5,000 mm, Welding positioner ESAB - DB-150 MACH-ID 9796 Make: ESAB Type: DB-150 Year: 2001 1 x Driven Master unit 150 ton 3 x Slave Idler unit 150 ton Vessel diameter 1000 - 5000 mm Wheel diameter: Wheel width: Rotation speed 10 - 1000 mm/Min Load capacity per section:150T Vessel range Minimum: 1000 Vessel range Maximum: 5000Ø No of wheels per section:4 Dedpfx Apozw Hh Hstjcl Length: 3200mm Width: 1000mm Height: 2100mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Alignment and welding plate, made of cast steel – gray cast iron, heavily ribbed formerly used as a scribing and measuring plate heavy-duty alignment plate Length: 2000 mm Width: 1000 mm Dcodpfx Ajzxr Tdoptol Thickness: 240 mm Working height: 850 mm Plate thickness: approx. 30 mm, continuous - 5 adjustable feet Weight: approx. 1000 kg good surface condition

Condition: like new (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: EQWDCOM, type of input current: AC, ZDI Quality Welding Consumables, Wires, Rods TIG Welding, Robotic Welding, Qualified Manufacturer, Quality Guaranteed. Wires, Rods, Stainless Steel, Nickel and Nickel Based Alloys, Strip Cladding. Dedpfx Apoyaw Hastocl ERNiCrMo-3, ERNiCrMo-4, etc.

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm Dcsdovuz N Repfx Aptol incl. foot switch

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: foot remote control, Protec container rotating device, 40-ton load capacity, complete set including foot and hand remote control Component diameter 600 - 4200 mm Speed continuously variable from 100 - 1000 mm/min. Motor power 3.0 kg Dual drive Dcsdozxxkcjpfx Aptel Drive wheel diameter approx. 350 mm Drive wheel width approx. 160 mm

Condition: ready for operation (used), load capacity: 750 kg, 3-axis welding positioner, 750 kg load capacity, control panel Dcodpfjxxvgzox Aptsl Tilt and speed infinitely adjustable from 0.05 to 1.0 rpm Clamping plate diameter: 0.8 meters Height when tilted to center min. approx. 0.45 m + 0.1 m base, max. 1.1 + 0.1 m base Height horizontal min. approx. 0.56 m + 0.1 m base Length 2.0 m, width 1.05 m

Condition: excellent (used), functionality: fully functional, load capacity: 1,000 kg, Lifting, swiveling 360°, also overhead Severt L manipulator, 1000 kg load capacity PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000kg / 2000 kg LOAD CAPACITY (KG) 1000 LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque CLAMP PLATE (NM) 1400 DEFLECTION MOMENT Ncedpz Aq Aozk Rdxs Tjw ARM (NM) 3000 FREQUENCY CONVERTER yes Dcsdpfx Aszphd Hoptol LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SWM001, type of input current: DC, nominal power at 50% duty cycle: 37 kVA, input voltage: 380 V, type of cooling: water, overall weight: 230 kg, warranty duration: 24 months, welding power (max.): 75 kVA, total width: 500 mm, total height: 1,620 mm, total length: 950 mm, Spot welder / welding machine with water cooling – 75KVA – adjustable power, resistance, etc., + spare tips Djdpeyl Sy Eefx Aptjcl

Condition: reconditioned (used), Year of construction: 2026, load capacity: 6,000 kg, total height: 1,021 mm, total length: 2,940 mm, total width: 1,900 mm, The PX series welding positioner allows for safe lifting, rotation and tilting to the optimal position of elements for welding or assembly. The tilting cylinders are protected by a metal body, which protects them from mechanical damage or possible splinters created during welding. Specification: - Model: BEAR PX6000 - Lifting capacity: 6 tons - Rotation, tilt and lifting - Solid and reliable construction - Positioner powered by three-phase current - Table rotation using an electric turntable - Adjustment of the arm height and table tilt using hydraulic cylinders Dcodpewcff Rofx Aptsl - Control of functions on the positioner housing Ideal for heavy welded elements

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 20,000 kg, Equipment: documentation/manual, foot remote control, Protec container rotator, 20-ton lifting capacity, complete set incl. foot and hand remote control Component diameter 500 - 3500 mm Speed continuously adjustable from 100 - 1000 mm/min. Dcjdpfx Aezxxhzjptol Motor power 1.5 kW Dual drive Drive wheel diameter 290 mm Drive wheel width 140 mm

Condition: excellent (used), load capacity: 250 kg, Equipment: foot remote control, 250 kg load capacity welding positioner, 2 identical units available with 380mm or 400mm chuck, top condition electrically tiltable very robust Continuously variable speed from 0.15 to 2.0 rpm Current transmission 300 A Turntable diameter approx. 500mm Tilting up to 135° Height (horizontal) approx. 900mm, tilted to center approx. 800mm Dsdowtrtcjpfx Aptjcl Length 950 mm x width 600 mm

Condition: new, table diameter 300 mm table load 100 Horizontal kg Dcjdpfx Asxaatnoptjl swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 Dcedpfx Apoh N Sd Uotol - weight approximately 330kg Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure Dcjdpfxozv Dcle Aptsl :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Dcodpfsxabm Njx Aptjl Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation Dsdexaafqopfx Aptjcl - stepless speed control - welding torch on / off - Control for turning time

Condition: excellent (used), load capacity: 2,000 kg, Height-adjustable welding positioner with a load capacity of 2 tons, Dcodjzk Ra Tepfx Aptjl including infinitely adjustable clamping extensions and clamping jaws. Condition: very good. Speed, height, and tilt are infinitely adjustable. Hand and foot remote control. Welding current transmission: 600 Amperes. Dimensions: Length: 1940 mm Width: 1200 mm Disc diameter: 1200 mm Height (tilted): min. 700 mm, max. 1550 mm Height (horizontal): min. 900 mm, max. 1700 mm Weight: 1750 kg.

Condition: good (used), functionality: fully functional, load capacity: 300 kg, Equipment: foot remote control, Welding positioner KT 600, Horizontal load capacity 600 kg, tilted 300 kg Power supply AC 380V, 50 Hz Drive motor AC 400W Table diameter 700 mm Height 700 mm, width 800 mm, length 800 mm Weight 155 kg Infinitely variable electric tilt 0–90° Dsdpfx Aexxvwtsptocl Speed 0.1–2.0 rpm Max. welding current transmission 400 A Includes hand and foot remote control Optional at extra cost: Quick-change 3-jaw chuck Diameter 400 mm, €550 CE mark/approval

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The newly developed filtoo filter unit from TEKA is a mobile filtration system suitable for a wide range of applications involving the filtration of fumes, dust, and gases. It is also suitable for high-alloy steels (stainless steel). The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA ( formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: > 99.9%). Where can the SIG 230 filtoo be used? - at welding workstations - in workshops - for soldering applications - by restorers - in metalworking shops Features: - BGIA-certified extraction and filtration system . IFA 1005030 for extraction . from high-alloy steels Steels & Non-ferrous Metals - Operating instructions in German Optional equipment available at extra cost (recommended) - STAVO retrofit kit (dust pre-separation) - For FILTOO with spark guard and collection tray Dcsdexaal Ropfx Aptel Note: - This unit is only used for extracting dry dust/fumes - Read the operating instructions before initial use

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system Dcsdpfex Hgunsx Aptjl -Manufacturer: CLOOS, Qintron water-cooled MIG/MAG welding machine -Type: Qintron 400 -Max. welding power: 400 A -Water-cooled -Wire feed case: Cloos FC 100E-KIT 4-roller drive -Accessories: incl. ground cable, gas valve, hose assembly (see photos) -Dimensions: 1100/700/H1240 mm -Weight: 181 kg

Condition: used, MIG/MAG pulsed gas shielded welding machine FRONIUS, Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Power: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 50 volts Open-circuit voltage: approx. 30 volts Mains connection: 400 volts, 50 Hz, 32 amps, plug - Digital display for voltage and current - Pulse function - Various welding programs can be selected Welding processes: MIG/MAG/TIG (program and manual operation) 2-cycle, 4-cycle, 4-cycle special and spot welding - Separate 4-roller wire feeder FRONIUS, Type VR 152, with connecting hose package approx. 1.5 meters - 4 meter hose package NEW, with central connection FRONIUS - External FRONIUS water cooling unit, Type FK 71 - Welding gas pressure regulator NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration The unit is also suitable for TIG and electrode welding. Additional equipment for TIG and electrode welding is not included in the scope of supply. Dcsdoyxy Tbopfx Aptel

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: VALCO Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Parameters : Efficiency - 14000 m3/h Dsdpfx Apjwiuaqstjcl Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Full technical documentation available. There are 2 pieces of this device available. Stock no.: 0986 1/2

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Dedpfxozdiz Ne Aptjcl Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.

Condition: good (used), functionality: fully functional, load capacity: 1,500 kg, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes handheld remote control - maximum load 15,000 N - 1,500 kg - rotation speed 0.07 - 1.3 rpm - rotation torque 1,000 Nm - hydraulic tilting up to 135° - tilting moment 3,000 N - max welding current 700 A - table diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - connection 3 x 400 V / CEE 16A - weight 730 kg We have several of these tables available Dcedpfoxxv Rtsx Aptol

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: 415 V; 150 kVA; 50 Hz Dcodpordf Acefx Aptsl Equipped with light gate Tool water cooling