Used Geppert Rührtechnik Spf 4 /1.1 for sale (59,054)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany Isdpfxed Tbbds An Djia - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Iijdod Tqaljpfx An Doa - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Isdpfofdkb Uox An Djia - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) Iiodpfxeguk A Hj An Dsa 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Iijdpfefdkbhox An Dea When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Ijdpeguk Dkefx An Deia - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Ijdpfxoguk Dvj An Doia - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Ijdoywpahjpfx An Deia Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: excellent (used), For sale: Complete industrial unit consisting of a Siemens electric motor and drive unit (pump/gearbox). The device is mounted on a solid base, ready for use in industry, workshop, or as a machine component. Technical data: Manufacturer: Siemens Model: 1LA5083-2AA20 Power: 1.1 kW Speed: approx. 2850 rpm Supply voltage: 220/380 V Frequency: 50 Hz Protection class: IP54 Mounting type: B3 Condition: Used, visible signs of use (scuffs, marks on paint). Technically functional. Note: A small plastic component in the terminal box is damaged (visible in the photo). This does not affect the operation of the device. Iisdpsywn Nzefx An Doa

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW Iedpfx Asynbc Ien Doia weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Condition: excellent (used), Electric motor from Kaltenbach Maschinenfabrik for sale Iodoyv Uvxjpfx An Dsia Price applies to 1 unit Condition: used, fully functional Motor tested with measuring instrument Normal signs of use and storage visible Technical data Manufacturer: Kaltenbach Maschinenfabrik Type: DKV 112M 238 4 Three-phase motor Power: 1.7 / 2.6 kW Voltage: 400 V, 50 Hz Protection class: IP54 Insulation class: F Speed: 700 / 1415 rpm Dahlander multi-speed motor Shaft diameter approx. 28 mm

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4 Folding Machine Machine in very good condition, ready for operation. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – Mobile delivery Iodpfjyur Izsx An Djia Infinitely variable folding speed control via inverter Cassette noise reduction Compressor included Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. Made in Germany.

Condition: used, Year of construction: 2001, DDS Dampening Quick Action Clamps Technotrans Cooling Device Iiedpoyx A S Hofx An Dsa Straight Machine Impression Account: 42 Mio. Print Output Maximum : 8.000 Sheets / Hour Colors : 4 Unit Max. Size : 360 x 520 mm Min. Size : 105 x 180 mm Printing Area Max : 340 x 505 mm Technical data can vary according to job, consumables, printing stock and, possible, other factors

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Iiedpfx Ajxy Tlwsn Doa

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Isdjtp I S Aopfx An Dsia

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. Iiodpfxjy A H U Hj An Dsa - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,280 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Iiodsy A Htcepfx An Doa Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,310 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). Iisdpfx Ansy A Hquo Dja - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,150 kg, load capacity per storage section: 3,050 kg, total length: 22,800 mm, total height: 3,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 22,800 mm, 4 double-bay pallet racks (M35112711-3) Each 5.7 m long, 3.5 m high, 1.1 m deep, Each with 2 bays, 2.7 m wide, Each with 3 beam levels, shelf load capacity 3000 kg. - 12 frames (RM3511 - RAL5019) Iiedpjyz Iccjfx An Dja - 24 base plates, shim material, fastening material - 48 floor anchors (ZZBA1210) - 48 single beams (T2711 - RAL2008) - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 20 working days after receipt of payment - Delivered free to site/installation location - Unloading from the truck to be carried out by the buyer using their own lifting equipment - Deliveries available throughout the Federal Republic of Germany (except islands); deliveries to EU countries upon individual agreement.

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, Iodpfx Aou R S Nwen Deia pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production. Iiedpfx Asyga T Njn Dja

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Iodpow R Syisfx An Doia

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. Iiodpfjwg R I Eex An Doa • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. //// PRICE SHOWN IS PER PIECE ////

Condition: good (used), MicroStep SPL-PA Plasma Cutting System with Extraction and Compressor Technology Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Ijdoyvd Uiepfx An Djia Machine type: CNC plasma cutting system CNC control: iMSNC Design: gantry construction with linear guides Extraction unit: Donaldson Torit DCE Electrical connection (extraction unit): 400 Volt Motor power (extraction unit): 7.5 kW Compressed air generation: screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE certification: available Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Condition: used, Model: D Serial No: 20829 Capacities: Maximum Swing Over Bed: 508mm Maximum Distance Between Centres: 4572mm Wheel Dimensions: 660x 75mm Work Head Speeds: (8) 22 – 129rpm Wheel Head Speeds: 735rpm Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 960rpm Work Head: 4HP 1440rpm Table Motor: 3HP 950rpm Complete With: Ijdoyx Hw Topfx An Dsia 4 No 2 Point Open Steadies Complete 3 No 2 Point Steadies Incomplete Table Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 13,000 x 2500 x 1800mm Approximate Weight: 19,000kg