Used Hans Schreiner Mdb-D290V for sale (2,421)

Condition: excellent (used), DOUBLE SCREWS for WEBER DS105.17D EXTRUDER Prsdpfxeywr Tdj Alwsb Application: PVC PIPES SCREW NUMBER: 014.185605 r.920 S Screw diameter: 104.7 mm and 104.8 mm

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Prsdpjyz Dr Tefx Alwsb Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Prsdjr I E Itopfx Alwsb Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, Technical Specifications Podsz Hfv Eopfx Alwerb • Pipetting Range: 500 nL – 5 µL • Accuracy and Precision: Accuracy within 2-3% of target volume; coefficient of variation (CV) under 3% • Technology: True positive displacement using single-use disposable micropipettes with individual pistons (eliminates cross-contamination) • Plate Formats: SBS-format plates including 96-, 384-, and 1,536-well densities • Deck Options: Available in 2-plate or 5-plate position deck configurations • Throughput: About 2 minutes for a 96-well plate, 3 minutes for a 384-well copy, and 5 minutes for a 4x384-well stamp out • Weight: 27 kg (59 lbs) for the 2-plate deck variant; 42 kg for the 5-plate deck variant • Dimensions: Approximately 390 mm x 470 mm x 690 mm • Power Requirements: Voltage 120 V / 220 V, Frequency 50 Hz / 60 Hz Key Applications • Serial dilutions and plate reformatting • Genomics workflows (NGS library prep, PCR/qPCR setup, normalization) • High-throughput screening and acoustic-ready plate preparation Good working condition. Please check out our other listings as well.

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Prjdpfx Aoyq R D Helweb

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2386, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, installation height: 280 mm, hydraulic refurbished SCHOEN double column press TES 25 Year of manufacture 1979/2025 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Pjdsvw Spmopfx Alwerb Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics

Condition: good (used), functionality: fully functional, Net price: 1,100.00 EUR Gross price: 1,309.00 EUR You will receive a proper invoice. Internal article number: 26093 Pneumatic press Schmidt Pressing force: 32 kN Stroke: 100 mm Prjdpfxez E N Dwe Alweb Connection: 220 V Ram holder: D20 mm Table: 300 x 220 mm Hole in table: D50 mm Dimensions (L x W x H): 35 x 60 x 130 cm Weight: approx. 100 kg Fully functional. The pneumatic hoses should be replaced as they are partially porous. You are welcome to inspect the press while it is powered on, in our heated warehouse covering an area of over 500 m².

Year of construction: 2004, condition: excellent (used), WEBER 3 layer PVC foam core pipe system with: 2 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Psdpfxjt Rcn Nj Alworb WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Application PVC foam core pipe (three layer) Only the extruders are sold, without feed block The screws and cylinders of the two extruders are in very good condition The system is in very good working order The system is my property Sahal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Year of construction: 2025, operating hours: 225 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973LZT031244, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. Psdpfx Asztakyjlwerb ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request.

Condition: new, functionality: fully functional, Year of construction: 2013, The part number 0685763C (often listed as 685763) corresponds to the Merlin Gerin MCH-M Spring Charging Motor Mechanism. This industrial electrical operator is designed specifically to automate the charging of stored-energy springs within heavy-duty circuit breakers. Core Technical Specifications Predpfxsz Ezv Ss Alwsb Parameter Specification Details Manufacturer Merlin Gerin (Legacy brand of Schneider Electric) Model Type / Component MCH-M Gear Motor / Electric Operator (Spring Charging Motor) Catalog / Part Number 685763 (Variant suffix C denotes technical revision level) Rated Control Voltage (U s) 200/240 V AC (at 50/60 Hz) or 200/240 V DC Power Consumption 180 VA Built-in Limit Switch Rating 10 A at 240 V AC (Integrated limit switch/spring charged switch) Technical Level No. 01 Net Weight Approx. 1.78 kg to 1.97 kg (3.92 lbs to 4.34 lbs) System Compatibility This motor mechanism is specifically designed as a plug-in breaker accessory for legacy, high-amperage Schneider Electric / Merlin Gerin Air Circuit Breakers (ACB) and Insulated Case Circuit Breakers (ICCB): Masterpact M series frames (M08 through M63) Masterpact MP series frames Masterpact MC series frames Functional Description The MCH-M mechanism acts as a motorized remote control interface. When electrical power is applied to the circuit, the motor runs automatically to compress the high-tension closing springs inside the Masterpact breaker. Once fully compressed, the integrated 10A Spring Charged Switch trips mechanically. This cuts power to the motor and readies the breaker mechanism for an instantaneous remote close or automated system reclosure command.

Condition: used, functionality: fully functional, machine/vehicle number: T34111.0891, Year of construction: 2006, operating hours: 11,250 h, load capacity: 10,000 kg, lifting height: 15,200 mm, fuel type: diesel, mast type: duplex, power: 157 kW (213.46 HP), empty load weight: 39,480 kg, drive type: Diesel, Empty container handler Chassis number: T34111.0891 Load center: 1220 Mast type: Duplex Transmission: Dana Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Rear tire type: Pneumatic Description: Predpfx Ajz Hg Ivelweb

Condition: used, Year of construction: 1978, pressure 7 t throat 180 mm stroke 100 mm table surface area 300x300 mm ram surface Ø105 mm hole in the table Ø60 mm table height 1050 mm Pedpfxsvnwfbe Alwjrb tool hole in ram Ø30 mm total power requirement kW dimensions of the machine ca. BxTxH 1200x1200x2100 mm

Condition: used, Year of construction: 1980, pressure 20 t distance between columns 450 mm stroke 100 mm table surface area 440x320 mm Pjdpfx Asvnwd Dolworb ram surface Ø140 mm hole in the table Ø50 mm table height 900 mm tool hole in ram Ø40 mm total power requirement 3 kW weight of the machine ca. 2 t dimensions of the machine ca. BxTxH 1400x1200x2200 mm

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW Prjdpfoyzd I Ujx Alwsb -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Year of construction: 2000, condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Table: 1800x1000mm Ram: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemens S7 control Floorstanding Psdpfx Aogbvkvelwsrb Sick lightguards Die cushion: 200mm stroke

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Prsdpfx Astiwgislwob Side passages Ground level installation

Condition: excellent (used), machine/vehicle number: 61 988, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Pjdpfsp H Tkiox Alwsrb

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Pedpolmmwrsfx Alwjrb

Condition: good (used), Year of construction: 1983, sheet width 2520 mm plate thickness 2.0 mm ST plate thickness 3.0 mm ALU distance between columns 2600 mm cutting angle 2.0 ° no. of strokes ca. 32 Hub/min weight 1480 kg range L-W-H 2892 x 1865 x 1430 mm Machine from a sheet metal shop Good condition (!!) Features: - Robust, electric-motor-driven panel shear Prjdjz Ek A Uspfx Alwob - Shatterproof, torsion-resistant welded steel construction - Compact and well-organized machine design - Electric-motor-driven backgauge * With analog position display * Manual fine adjustment from the front - 1x holding-down bar (continuous) - 1x freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,180 h, load capacity: 3,300 kg, lifting height: 6,900 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 75 kW (101.97 HP), fork length: 1,200 mm, empty load weight: 7,700 kg, total length: 4,970 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic forklift, rigid frame Mast type: Telescopic Speed class: 20 Condition: Ready for use and fully functional Pjdjz Hf Rcopfx Alwerb Technical condition: good Front tire type: Pneumatic Front tire size: 500 80 24 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 500 80 24 Rear tire condition: 80 - 100% 3. Valve

Condition: used, Year of construction: 2019, operating hours: 3,279 h, load capacity: 7,000 kg, lifting height: 24,800 mm, fuel type: diesel, gearing type: automatic, Equipment: cabin, head guard, In accordance with our "General Terms and Conditions," without any warranty or guarantee, and subject to availability until the sale is concluded, errors and omissions excepted, and subject to prior sale, we can offer you the following vehicle: Manitou MRT 2470+ Privilege telescopic handler Manufactured in 06/2019 3,279.5 operating hours Permissible gross vehicle weight 23,600 kg Front axle load 11,880 kg Rear axle load 12,000 kg Load capacity 7,000 kg Tractive force 9,200 daN 129 kW / 175 hp Last maintenance on 07/01/2026 at 3,214 operating hours, next maintenance on 07/01/2027 or at 3,714 operating hours Dimensions Overall width, stabilizers extended 6.25 m / 20.50 ft Overall height 3.05 m / 10 ft External turning radius, chassis 6.50 m / 21.32 ft Tilting angle 12.30° Discharge angle 108.70° Stabilizers Type: Telescopic scissor supports Controls: Stabilizer control. Individually or simultaneously Engine Power: 176 hp / 129 kW Max. torque: 750 Nm at 1500 rpm / 553 lb-ft at 1500 rpm Number of cylinders - displacement: 4 - 5130 cm³ / 4 - 313 in³ Injection: Direct Pedpfx Alez E Txlewsrb Cooling: Water Transmission Type: Hydrostatic Tractive force: 9500 daN / 21356.85 lbf Parking brake: Automatic, negative engagement Service brake: Hydraulic Hydraulics Pump type: Variable Hydraulic flow rate: 180 l/min / 47.50 gpm Pressure: 350 bar / 5076.32 psi Tank Hydraulic oil: 290 l / 76.60 US gal. Fuel: 290 l / 76.60 US gal. Exhaust gas purification fluid (AdBlue): 57 l / 15.05 US gal. Noise and vibration Noise level at the driver's position (LpA): 79.70 dB(A) Ambient noise (LwA): 108 dB(A) Vibration level, hand/arm

Condition: excellent (used), A robust German machine designed for riveting, crimping eyelets, snaps, and other fastening elements. Thanks to its stable construction and electric drive, it ensures consistent and precise operation. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: 167-12 Serial number: 34,756 Power supply: 220/380 V Motor power: 0.25 kW Motor speed: 1390 rpm Electric drive with foot pedal 220 V electromagnetic brake Adjustment of working settings Stable industrial construction Prjdjzgl Hyepfx Alweb Made in Germany Condition: Used machine, in good visual condition. Condition as shown in the photos. Sold in the exact condition as depicted in the photographs.

Condition: excellent (used), For sale: Constantin Hang 103 LOK die-cutting machine, a product from a renowned German manufacturer. This device is designed for the precise die-cutting of paper, cardboard, leather, felt, rubber, and other soft materials. The machine is equipped with an electric drive, foot pedal control, and a robust work table with a material guide, ensuring comfortable and precise operation. Thanks to its robust construction, the device is characterized by high durability and reliability. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Prjdjziqq Nopfx Alwjb Model: 103 LOK Machine number (Serial no.): 9578 Type: die-cutting machine Drive: electric Control: foot pedal Motor: Georgii KRD 328 Power supply: 220/380 V Motor power: 240 W Frequency: 50 Hz Motor speed: 680 rpm Work table with guide Robust steel construction Condition: Used. Functional. Shows normal signs of wear and tear due to age and use. Visual condition consistent with the photos.

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Pedpfjxw Rcuox Alwjrb Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, Mechanic lathe LESTO Scintilla (Switzerland), model GD 1124 CR Machine no. 6T 7868, year of manufacture approx. 1975 Pedpfez Ek Rxex Alworb Electrical problems with the capacitor motor Drive power: 0.44 kW Mains connection: 230 volts, 50 Hz - Fixed steady rest - Collets - Faceplate Space required L x W x H: 1100 x 500 x 400 mm Weight: approx. 90 kg Good condition - Electrical problems with the capacitor motor