Used Hanwell 4000 Wireless Transmitter for sale (3,888)

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 1,55,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Nsdpfx Ahszu S U Honelf Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes Njdevwgm Hepfx Ahnjlf ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Year of construction: 1990, condition: ready for operation (used), A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction roller diameter: 260mm, pressure roller diameter: 2500mm. 5) Crosslapper Autefa Topliner CL 4000/4002 - WebMax, year of construction: 2006, min. fineness range: 0.7dtex, fiber types: chemical/natural/regenerated/blends, max. web weight: 100g/m², max. web weight with crosslapper: 5000g/m², max. laying width: 3500mm, working width: 2500mm, max. laying speed: 130m/min, lapper lift: 100mm, machine dimensions X/Y/Z: approx. 3850mm/8800mm/2200mm. 6) Drafting unit, working width: 2500mm, machine dimensions X/Y/Z: approx. 1600mm/3650mm/1650mm. 7) Double needle loom Dilo CBF 31/HVSL 31, year of construction: 2007, max. working width: 3100mm, stroke frequency: 1375/min, needle beam stroke: 60mm, horizontal beam stroke range: 0mm-6mm, number of needles per 1m working width: approx. 15430, machine dimensions X/Y/Z: approx. 3350mm/5150mm/4500mm, weight: approx. 38000kg. 8) Web accumulator Suchy WOB 3200, storage volume: 40m³, web weight range: 50g-2000g/m², max. working speed: 40m/min, max. production speed: 20m/min, working width range: 1000mm/3000mm, roller top width: 3200mm, machine dimensions X/Y/Z: approx. 4300mm/5050mm/5300mm. 9) Slitting unit Suchy, year of construction: 2006, weight: approx. 250kg. 10) Climbing roll winder, winding roller diameter: 350mm, min. winding diameter: 3inch, max. winding diameter: 1500mm. 11) Edge trimmer Hepp-Schwamborn. 12) X-ray measuring device Protagon Q6. This is a complete and automated nonwoven fabric production line starting from fiber bales. Documentation available. An on-site inspection is possible. Expected to be available from the end of March 2026. Nsdpeymfc Asfx Ahnelf

Year of construction: 2015, condition: ready for operation (used), A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible. Nedpfxjw Azu Ij Ahnolf

Condition: ready for operation (used), Year of construction: 2019, Two heavy-duty transport trolleys are available. 1) Pefra 4000, year of construction: 2019, load capacity: 3000kg, permissible driving speed: 10km/h, permissible total weight: 4010kg, tare weight: 1010kg. 2) Bauer RGP-1, year of manufacture: 2017, load capacity: 2000kg, insertion width: 700mm, insertion pocket length: 870mm, front dimension: 1540mm, tare weight: 378kg. Documentation available. On-site inspection is possible. Nlsdpfxovdu Ixo Ahnsf

Year of construction: 1965, condition: ready for operation (used), Stroke speed cut/return: 80m/min, feed cross support/long support: 27mm/stroke, table dimensions X/Y: 4000mm/1250mm, max. table load (table center): 2000kg, tool holder: planing steels with rectangular cross-section, tool dimensions X/Y: 50mm/50mm, bed length: 9400mm, planing length: 4500mm, planing width: 1520mm, planing height without/with cross support: 1310mm/1250mm, connected load: 64kVA. Total system dimensions X/Y/Z: approx. 10000mm/3300mm/2500mm, weight: approx. 26000kg, foundation weight: 60000kg. The machine was electrically re-equipped in 1986. Documentation available. On-site inspection is possible. Nlodpfx Aswxxv Ushnef

Condition: ready for operation (used), Year of construction: 2007, A fully automatic Dollberg counting and filling machine for tablets and capsules is available. Tablet diameter and output: 5mm: 2000 pieces/min, 9mm: 1800 pieces/min, 10mm: 1600 pieces/min, 12mm: 1400 pieces/min, 15mm: 1000 pieces/min. Capsule size and output: size 5: 1200 pieces/min, size 4: 1100 pieces/min, size 3: 1000 pieces/min, size 2: 900 pieces/min, size 1: 800 pieces/min, size 0: 600 pieces/min. Container feed: 60 containers/min, counter dimensions X/Y/Z: approx. 900mm/550mm/500mm. Documentation available. On-site inspection is possible. Nljdpfjv Ubpqox Ahnjf

Year of construction: 2007, condition: ready for operation (used), A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible. Nodpsv Dkcfjfx Ahnelf

Condition: ready for operation (used), A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible. Nlodpfx Ahoxxa T Ejnof

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Nlsdpfey Uydlsx Ahnsf

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 3800 mm Maximum swing diameter 3800 mm diameter of spindle flange 1900 mm control Siemens 840 D sl Table rpm 100 1/min Nsdpfx Ahjzpzblsnelf Maximum speed of driven tools 6000 1/min x-travel 2800/3200 mm z-travel 1000 mm Feed - X 20 m/min feed capacity - x 22 kN tool taper CAPTO C8 total power requirement 280 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m weight of the machine ca. 155 t Equipment/Accessories: - 2 tool changers, each with 60 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Nedpfx Ahszp H R Eonjlf Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: new, Measuring range 0 to 60 bar relative, absolute Accuracy (linearity) 0.1 to 0.15 % Output 1x PNP switching output, 2x PNP switching output, 1x PNP switching output, and 1x analog output) (either: 0(4) to 20 mA, 0 to 10 V) Nledeh Rul Tepfx Ahnsf Special features Programmable, switching output, measuring range scaling 1:4, selectable measuring unit, housing and process connection made of stainless steel (316L) Process connection Thread, hygienic connections, diaphragm seals, JUMO PEKA Medium temperature -25 to +200 °C

Condition: new, ABB ETP90A-4940 Pressure Transmitter Nsdpfjh Rulwjx Ahnslf

Year of construction: 2000, condition: ready for operation (used), Built in 2000 Size max 370 x 320 x 50 mm min 140 x 105 x 2 mm Mechanical speed 4.000 c/h Equipment gathering machine: • chain tensioner with hand fed • Wohlenberg Sprinter 7009 • 12 stations perfect binder • 15 clamps • milling and roughening unit • dust extraction • fume extraction • hotmelt spine gluing unit • hotmelt side gluing unit Nodpfjd H Ukdsx Ahnslf • 2 premelters • rotary cover feeder • belt delivery • lay down device • conveyor system optional equipment---not included--- • three knife trimmer • PUR gluing unit

Year of construction: 2003, condition: good (used), Size: max 370 x 320 x 50 mm, min 140 x 105 x 2 mm Mechanical speed: 4.000 c/h Equipment gathering machine: • 2 additional handfed stations • Wohlenberg Sprinter 7009 • 16 stations • missing sheet and double sheet control • criss-cross delivery perfect binder • 15 clamps • spine preparation station • milling and roughening unit • dust extraction • fume extraction • hotmelt spine gluing unit Nodjlzh Dispfx Ahnjlf • hotmelt side gluing unit • 2 premelters • pile cover feeder • plates-chain transport • conveyor system • trimmer Wohlenberg 44 FS 50 standards • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue

Condition: used, Year of construction: 2009, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Njdpozmv Dcsfx Ahnjlf Year of Manufacture: 2009 CNC Control: Global Control Plus Track width: 4,000 mm 2 x Plasma with Hypertherm HPR260 power source Travel length: 10 m 2 x oscillating conveying tables Size: 3 x 3 m each Without filter system 22726ä

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,963 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X45-15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- Nledpszqfhrofx Ahnsf 🛠️ Years of Experience | 🧰 In-house Service & Paint Shop | 🤝 Expert Consultation | 🚛 Own Transport Fleet | 🔧 Comprehensive After-sales Support Looking for a forklift you can truly rely on? We are a reputable dealer of new and used forklifts, serving the industry for many years. Our customer base spans all of Europe—from small businesses to major industrial facilities. Our forklifts are more than just equipment—they are your assurance of seamless and dependable logistics. -- What sets us apart? -- ✅ Every forklift undergoes a thorough technical inspection and servicing (including checks, tests, oil & filter changes, and component refurbishment) ✅ Full UDT (Office of Technical Inspection) certification available on request ✅ In-house paint and service workshop—machines are optimized both technically and aesthetically ✅ Pan-European delivery—provided by our skilled drivers ✅ Operator training and on-site machine demonstration at handover ✅ Ongoing after-sales technical support—we stay connected post-purchase ✅ On-site viewing and test drives welcomed at our facility ✅ Hundreds of satisfied customers throughout Europe—become one of them today ✅ Financing options available—we collaborate with leading leasing providers ✅ Invoicing in EUR or PLN—as per your preference -- FOR SALE -- COMBILIFT C5000 – Four-Way Forklift Truck 📅 Year of manufacture: 2015 ⏱️ Operating hours: 4,963 h 🔋 Propulsion: GAS / LPG 📦 Load capacity: 5,000 kg 📏 Mast: Duplex – 4,000 mm lift height 🔩 Fork positioner – width: 1,350 mm | Forks: 1,200 mm 🛞 Superelastic tires – 100% condition 🧪 Technical condition: Excellent – fully serviced 🎨 Visual condition: Clean, corrosion-free, and ready for work 📐 Dimensions: - Lowered mast height: 2,600 mm - Total length: 2,500 mm - Overall width: 2,300 mm - Fork positioner width: 1,350 mm - Overall height: 2,950 mm -- Ideal for: -- 🏭 Narrow-aisle warehouse applications 🌲 Timber, steel, and pipe handling industries 📏 Handling long and bulky loads 🏗️ Both indoor and outdoor operations -- FT Logistics – Quality you can depend on. Service you can trust. --

Condition: ready for operation (used), Year of construction: 2011, operating hours: 31,113 h, functionality: fully functional, machine/vehicle number: NHX40KB0083, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller model: MITSUBISHI MSX-853 IV, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 660 mm Feed rate: 0–60 m/min Distance from spindle nose to table surface: 80–640 mm Number of pallets: 2 Pallet dimensions: 400 × 400 mm Table length: 400 mm Table width: 400 mm Max. workpiece length: 630 mm Nlodpjzrl H Rsfx Ahnsf Max. workpiece width: 630 mm Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece size: Ø 630 × 900 mm Max. workpiece weight: 400 kg Pallet changing time: 9 s Max. spindle speed: 12,000 rpm Spindle drive power: 15/11 kW Spindle torque: 110 Nm Spindle bearing inner diameter: 80 mm Spindle type: SJ-2B4351TK Tool positions: 40 Max. tool diameter: 70 mm Max. tool diameter with free neighboring positions: 170 mm Max. tool length: 450 mm Max. tool weight: 8 kg Tool holder: MAS-BT40 MACHINE DETAILS Control system: MITSUBISHI MSX-853 IV Rated power: 38 kVA Total power consumption: 38 kVA Dimensions & Weight Dimensions (L x W x H): 2,720 x 4,224 x 2,513 mm Total weight: 7,600 kg Coolant tank capacity: 170 l High-pressure coolant: 15 bar Operating hours Hours under power: 64,734 h Operating time: 31,113 h EQUIPMENT Chip conveyor Work area light 4th axis Cooling High-pressure cooling 2-pallet changer

Condition: excellent (used), Thompson mixer grinder 4000. All s/s. Nljdpfxezrl Iho Ahnef

Condition: good (used), Year of construction: 2008, pressure 200 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 200 mm dayligth 425 mm throat 300 mm working feed 9.0 mm/sec return speed 90.0 mm/sec work height max. 980 mm back stop - adjustable ca. 700 mm Control PPS-TS Touch oil volume 350 l total power requirement 18.0 kW weight 12.000 kg range L-W-H 5100 x 1950 x 2850 mm Well-maintained condition (!!) Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - ?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC "PPS-TS TOUCH" control unit * intuitive, touchscreen-based user interface Njdpezndq Hsfx Ahnolf * simple navigation * tool and program library * X-axis control and position display * Y-axis control and position display * swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized backgauge (X-axis) * with 4 manually adjustable gauge fingers * includes lateral and height adjustment (Z and R axes) - LVD upper tool holder * sectionalized goose-neck upper tool - LVD lower tool holder * sectionalized 1V die - 2x front support arms - side safety guards (swiveling doors) - rear safety guard (swiveling door) - 1x movable foot pedal - machine documentation (NL)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9101, travel distance Y-axis: 4,600 mm, travel distance Z-axis: 1,600 mm, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Machine configuration: • PowerPortal4000 • 45° diagonal milling head (C 0.01° / A 0.01°) • Camera system integrated in SHW diagonal milling head • 4-point Hirth-type milling head interface • Heidenhain TNC 7 • HR 550 FS handwheel • Heidenhain optimization for 5-axis machining • X = freely selectable, Y = 4,600 mm, Z = 1,600 mm • ToolCenter with 90 tools • Coolant system 2,500 l Nledpfxsygtnas Ahnef • Coolant pump 70 bar / 30 l/min • Coolant/air switching • Wash gun in the working area • Main drive 75 kW up to 6,000 rpm • Tool holder SK 50 BIG-PLUS • Panelling and grating • Double chip conveyor • SHW-UniScan • Sealing air • Operating mode 3 • Hexagon wireless probe • LED workspace lighting • Second camera in the working area

Condition: used, Year of construction: 1999, cutting width 3000 mm Nsdpezmy Tbjfx Ahnjlf Numbers of torche 1 Cutting system Plasma PA-S 150 total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack Nlodpfx Ahjzl D Exjnsf

Condition: new, PRICE: 4000 EUR Paddle Mixer S80 Nsdpfsp R Sh Nex Ahnslf Manufacturer: Sind Model: S80 Dimensions:1400x600x1400 mm Electrical power: 1.5kW Capacity: 110L / 80kg