Used Hbm 75 X 2000 for sale (66,650)

Year of construction: 1998, condition: good (used), Make: UNION Iiedpfokwcdbsx Amyob Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), total length: 4,010 mm, total width: 2,100 mm, plate height: 200 mm, Manufacturer: STOLLE Type: RDG Year of manufacture: 1980 Specifications Metric US Standard Length 4010 mm Width 2000 mm Height 220 mm Number of T-slots 13 T-slot distance / pitch 400 mm T-slot size 35 mm Iiedjwp Dhdjpfx Amysb Weight per plate approx. 5.3 tons Dimensions (estimated) Length 4010 mm Width 2100 mm Height 220 mm Weight 5300 kg Please note: The information on this page was provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract conditions. We recommend that you check all important details.

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Iijdjw Iq Ugepfx Amyjb Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: ready for operation (used), GMN TSE 75 cdu x 200 high-speed spindle SP: 12-18-30000 rpm, serial number: R336458, used, normal signs of wear, 100% functional, scope of delivery as per photos Iedpji Eaa Hsfx Amyoib

Condition: used, Year of construction: 2021, gebraucht 2021 9502 Türkei 2100 € Ijdewiquqopfx Amyjib 1 1050 mm 2 mm 75 mm 1930 mm 700 mm 1160 mm 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: good (used), Year of construction: 1992, Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg Iisdsywzbdspfx Amyob

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei Iedpfxey Dvlko Amyjib 4600 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls

Condition: like new (used), Scale with the following dimensions: Length 2000 mm Width 1500 mm Height 110 mm Aisi 304 L stainless steel Load capacity 3000 kg The scale has valid certification for over 2 years Touchscreen display with multiple functions and language selection option Please check my other listings Iiedpfxey Ilvys Amyjb

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Isdpfx Aoy Rm R Rsmyeib Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details turning diameter 570 mm turning length 2000 mm control Heidenhain Iiedpfxsy Dpvvs Amyob turning diameter over bed slide 340 spindle turning speed range 1 - 2500 U/min weight of the machine ca. 3,6 t Additional information Features: 2 steady rests Manual chuck with jaws Tool holder with inserts

Condition: new, width of the strips 100 mm Iiedpfx Aoxab Dzsmyjb band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Condition: good (used), End mill, end mill, cutter, shell cutter -Manufacturer: Reishauer, end mill with longitudinal groove, 2 pieces -Type: 75 x 75H Sp 5000 KHSS-E 75x75x27 -Hole: Ø 27 mm -Cutting material: HSS-E -Price/Fee: complete -Transport dimensions: 150/75/H75 mm Iisdpfx Amey A Embsyjb -Weight: 2.9 kg

Condition: good (used), End mill, end mill, cutter, shell cutter -Manufacturer: Fette, end mill with longitudinal groove, 2 pieces -Type: Fette 75 x 75H Sp 880 HSS -Hole: Ø 27 mm -Cutting material: HSS -Price/Fee: complete -Transport dimensions: 155/75/H75 mm -Weight: 3.3 kg Isdpfey A Ehfjx Amyeib

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 1,600 mm, load center: 600 mm, mast type: simplex, fork length: 1,150 mm, tire condition: 100 %, front tire type: polyurethane tires (non-marking), empty load weight: 250 kg, total height: 2,030 mm, total length: 1,642 mm, total width: 740 mm, color: yellow, Equipment: pallet forks, A mast trolley with a lifting capacity of 2000 kg is a versatile device used for unloading delivery vehicles as well as for work in warehouses and shops. Its solid construction ensures long service life, while the polyurethane wheels provide quiet and trouble-free operation. Technical Specifications Load capacity: 2000 kg Lifting range: 85–1600 mm Fork length: 1150 mm Mast type: single mast Overall height: 2030 mm Height with forks raised: 2030 mm Overall length: 1642 mm Fork outer width: 550 mm Overall width: 740 mm Net weight: 250 kg Number of wheels (front/rear): 2 / 2 Wheel and roller material: polyurethane Steering wheel dimensions: 180 × 50 mm Roller dimensions: 75 × 70 mm Load center: 600 mm Fork width: 160 mm Fork height: 60 mm Fork inner width: 390 mm Iiodpfxjytcmre Amysb Adjustable fork spacing: Yes Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Should you be interested in other machines please visit our website.

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 105 mm, turning diameter: 660 mm, center height: 330 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 1,400 mm, total height: 1,600 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, overall weight: 3,700 kg, EX-STOCK PROMOTIONAL OFFER! NEW "CE" CERTIFIED. LATHE WITH MECHANICAL CLUTCH 3-AXIS DRO AND SEMI-NORTON GEARBOX. EQUIPPED WITH JOYSTICK FOR RAPID FEED ENGAGEMENT. ONE-PIECE CAST IRON BED. Center height: 330 mm Max swing over bed: 660 mm Max swing over carriage: 420 mm Max swing in gap: 870 mm Tool height: 32 mm Distance between centers: 2000 mm Spindle bore: 105 mm Spindle mount: Camlock D1-8 Spindle speeds: (12) 36 ÷ 1600 rpm Longitudinal feeds: 0.063 ÷ 2.52 mm/rev Cross feeds: 0.027 ÷ 1.07 mm/rev Metric threads: (22) 1 ÷ 14 mm Imperial threads: (26) 2 ÷ 28 TPI Tailstock taper: MT 5 Motor: 400 V 50 Hz 7.5 kW Iiodpfx Aeyyn Ddomyob Coolant pump: 400 V 50 Hz 90 W Dimensions: 3500 x 1400 x 1600 mm Net weight: 3700 kg INCLUDED IN DELIVERY: 320 mm Ø three-jaw self-centering chuck, reversible jaws 400 mm Ø four-jaw independent chuck 600 mm Ø faceplate Travelling steady Fixed steady Rotating tailstock center MT 5 Thread chasing dial Leadscrew guard Tool post guard Spindle guard Rear splash guard Quick-change tool post type C LED work lamp Cooling system Electro-mechanical foot brake Quick-lock tailstock carriage Carriage gears in oil bath Adjustable leveling pads

Condition: good (used), functionality: fully functional, Cutting length: 2020 mm Max. sheet thickness at 400 N/mm²: 5 mm Max. sheet thickness at 750 N/mm²: 3 mm Iiedpfxsy Hlyvs Amyob Cutting angle approx.: 1.5° Strokes per minute: 40 strokes/min Back gauge approx.: 750 mm Stand throat depth: 200 mm

Condition: like new (used), Year of construction: 2019, load capacity: 1,200 kg, lifting height: 6,500 mm, construction height: 3,000 mm, operating hours: 1,874 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 312 Mast: P + F - 3F6500 ID: 25116.5772 Category: Used Iiodpfxjy Itgge Amyeb Mast: 3F Lowered height: 3000 mm Lifting height: 6500 mm Capacity: 1200 kg / 600 kg Platform height: 6500 mm Order picking height: 8100 mm Cabin width: 1400 mm Year: 2019 Operating hours: 1874 hours Battery: 48 V / 620 Ah Options: - Triplex mast - FFL - SPECIAL platform!!!! (L x W = 2000 x 1400 mm!!) - Guidance rollers on the safety gates – complete, LIKE NEW!!

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Isdev Htniepfx Amyoib Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, winding roll, roll carrier for cardboard roll -Roll carrier: winding roll for packaging machine -Roll: Ø 75 x 1700 mm -Drive shaft/mount: Dimensions see photos Ijdpjxmi H Defx Amyeib -Dimensions: Ø 95 x 1880 mm -Weight: 35 kg

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roll, roll carrier for cardboard roll Iijdsxmi E Tspfx Amyeb -Roll carrier: winding roll for packaging machine -Roll: Ø 75 x 2040 mm -Shaft: Ø 44 x 330 mm -Drive wheel: Ø 188 mm / Dimensions see photos -Dimensions: Ø 198 x 2760 mm -Weight: 55 kg

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roller, roll carrier for cardboard roll -Roller carrier: Winding roll for packaging machine -Roller: Ø 75 x 1810 mm -Shaft: Ø 35 x 415 mm Iedpfxeyx Adio Amyoib -Drive shaft/mount: Dimensions see photos -Number: 2x roller carriers available -Price: per piece -Dimensions: Ø 75 x 2640 mm -Weight: 26 kg/pc.

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roller, roll carrier for cardboard roll -Roller carrier: Winding roll for packaging machine -Roller: Ø 75 x 1700 mm Iiedpfx Aexmi Hkemyob -Drive shaft/mount: Dimensions see photos -Dimensions: Ø 95 x 1880 mm -Weight: 35 kg

Condition: used, Year of construction: 1970, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as seen, see photos Ijdpfxoywzhqe Amyeib -Condition: upper bending tool has been welded -Manufacturer: LOTZE Swivel bending machine type HDZKE20 -Drive: mechanical -Max. working width: 2000 mm -Max. sheet thickness: 6 mm -Max. intermediate dimension: 235 mm -Connected load: 5.2 kW -Dimensions: 1340/3460/H1400 mm -Weight: 3700 kg

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Iiodpfx Amjhqnl Toysb Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery Iedpfx Asd Ab Uuomysib What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.