Used Hispano Suiza Vibrating Feeder for sale (4,447)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg Gedpfsxf Up Uox Ahljbr good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: excellent (used), Year of construction: 2011, Vibratory feeder for aligning under slicer, cutting machine, or dicing machine Gedpfx Ahjwykktelobr

Condition: good (used), Year of construction: 2011, Vibratory feeder for sale, price is for one unit Gsdowydkgspfx Ahljbr

Condition: excellent (used), Vibratory feeder with linear feeder and sound insulation by California Vibratory Feeders. 110 Volt, 50 / 60 Hz, 2.5 Amp. Was only used for a trial. Equipped with an integrated light barrier on the linear guide rail for switching off the vibratory bowl and an air nozzle for part separation. Godpfoxrb S Nex Ahlsbr

Condition: good (used), SIM SF 500 vibratory bowl feeder SIM SF 500 vibratory bowl feeder with SIM BB-20 belt hopper and AKB DTB-UU-750/20 linear feeder SIM SF 500 Gbodjvi Hkiepfx Ahljr Vibratory bowl feeder 230 V 50 Hz Diameter: 500 mm SIM BB-20 belt hopper 20 liters Filling volume: 20 liters Max. filling weight: 35 kg Chute width: 80 mm Belt speeds: 0.1 - 0.6 m/min Hopper trough, chute: Stainless steel Drives: AC gear motor 230V / 50Hz AKB DTB-UU-750/20 Linear conveyor Supplied without enclosure Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, functionality: fully functional, power: 5 kW (6.80 HP), fuel type: electric, empty load weight: 4,200 kg, Year of construction: 2024, filling bunker with bunker gutter bunker capacity 10.5m³ Gedeuqynmjpfx Ahlobr S355 / St52-3 vibratory feeder with 10mm Hardox 450 wear plate gutter fully stress relieved annealed 2 x imbalance motors 2,5kW NEW

Condition: like new (used), Vibratory feeder DIETZ ROLLWA ZFE (W703173) #V-25 Gbjdpfx Ahoy A Eiieljr

Condition: new, functionality: fully functional, power: 22 kW (29.91 HP), fuel type: electric, color: other, Year of construction: 2026, • The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression. • Work with wet and sticky materials without clogging and jamming. Gsdpfxszg Tauo Ahlobr • Adjustable feed rate. • It occupies less space and has smaller height. • It works without dust, vibration and noise. • Low power consumption and maintenance frequency. • Width: 1400 mm • Length: 2500 mm • Motor power: 22 kW • Bar number: 5-9 • Elliptical bar shape • Aperture: 25-150 mm • Feeding size 50-1.500 mm • Chainy drive system • Max. Capacity 200-300 T / s • Capacities calculated according to the specified material density (1.6 tn/m3)

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. Gsdjzlth Nspfx Ahljbr • Model: FABO TE-2060 • Type: Vibrating Screen • Size: 2000 x 6000 mm • Deck size: 2-3-4 • Motor: 22 kW Bearings: Heavy duty SKF-FAG • Capacity: 180-220 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2026, condition: new, functionality: fully functional, Vibrating screens are used in crushing and screening plant to separate end products of various sizes. When the material is poured into the screen, the smaller ones pass through the screen surface. Vibrating screens are produced in two, three and four decks and in various sizes. The vibration system can be in the middle or above the screen body. It is obtained by rotating the eccentric weights connected to the shaft, which are mounted on the screen body. Screen body sits on fixed or mobile chassis with heavy type helical springs that absorb vibration. The vibration systems of these vibrating screens are operated by belt-pulley transmission with an electric motor. Horizontal screens, which are capable of better-quality screening, are driven by a double drive center. • Model: FABO HTE-2260 • Type: Horizontal Vibrating Screen • Size: 2200 x 6000 mm • Deck size: 2-3-4 Gedpfx Ahsy E Hwtolobr • Motor: 2 x 30 kW • Bearings: Heavy duty SKF-FAG • Capacity: 250-370 TPH • Including chassis, motor and safety guards. Depending on its size, it has a screening capacity in the range of 250-370 tons per hour.

Year of construction: 2026, condition: new, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-1650 • Type: Vibrating Screen • Size: 1600 x 5000 mm • Deck size: 2-3-4 • Motor: 15-18,5 kW Bearings: Heavy duty SKF-FAG Gbjdpfoyy Iiysx Ahlsr • Capacity: 100-130 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. Gbjdpfxszg Tans Ahler FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Year of construction: 2026, condition: new, Heavy Duty Vibrating Washing Screens are designed for classification and washing of all types of materials such as medium-sized aggregates and finished products. Model: FABO TE-1650 Type: Vibrating Screen Dimensions: 1600 x 5000 mm Decks: 2-3-4 Motor: 15-18.5 kW Bearings: Heavy-duty SKF-FAG Capacity: 100-130 Tons per hour Chassis, motor, and safety covers included. All our products come with a 1-year warranty! Free installation and operator training included. FOR MORE INFORMATION, PLEASE CALL US! Gbedpsyy Ilhjfx Ahljr

Condition: ready for operation (used), Stainless steel tub Gbodpfx Ahox Hyp Esljr Dimensions: 1900 x 890 x 200 mm

Year of construction: 2005, condition: excellent (used), diameter: 1700 mm Gsdofd E R Ajpfx Ahljbr Stainless steel

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. Gbsdpfx Aemk S Slohler We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: used, Diameter: 900 mm Gjdpoh Eyghefx Ahlsbr

Condition: excellent (used), Manufacturer:REO-USA type: reovib mts 442 Electrical data: 230 V; 60 Hz; dimensions: 610 x 560 x 1180 mm plate diameter: 330-380 mm weight: 223 kg Gsdpfjt H Nk Nox Ahlobr

Condition: good (used), In this offer you acquire a used longbow feeder "Canon BDT VX 370". Item for sale: Gbjdel Axtgjpfx Ahlor 1 x Canon BDT VX370 suitable for: Canon imagePRESS C10000VP Canon imagePRESS C8000VP Ricoh Pro C7100 Serie Ricoh Pro C9100 Serie Condition: This is a used unit and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available upon request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Ready to ship worldwide Gbjdpow D Ev Ejfx Ahlor More pictures and videos available upon request

Condition: excellent (used), Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Hu3Nhjg Parts conveyor, chips conveyor, bar feeder available. Gbodpfx Ahsvllbrolsr Spindels bore 42 mm IRCO feeder bar All manuals and documentation available

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 incl. S-Bridge Condition: This is a brand-new unit in its original packaging Packaging and shipping: Godeyuuc Ispfx Ahljbr You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: excellent (used), machine/vehicle number: 2069056, Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Gbodpfx Asw Rvu Dohlsr Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. Gbedpfx Aeh Eibaohler The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating screens are engineered for aggregate, mining, and recycling applications, featuring a durable body for long service life. Their simple yet efficient design ensures precise screening of various materials. The modular structure allows easy maintenance and quick part replacement, while the user-friendly design boosts productivity. Screens can be produced as “top-driven” or “center-driven,” with steel or polyurethane surfaces depending on material hardness. High-frequency vibration provides effective material distribution and optimal separation. With powerful motors, balanced vibration, and damping systems, CONSTMACH screens ensure reliable, continuous operation. Gedpfx Ajxpyinshlebr Vibrating Screen Technical Specifications Model: CVS-2060 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 6,000 mm Production Capacity: 192 – 240 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 17,500 – 20,500 kg Why Choose CONSTMACH Vibrating Screens? CONSTMACH offers maximum efficiency, low maintenance costs, and long service life with its screen systems manufactured to international quality standards. It provides solutions suitable for every capacity with its wide range of models. With superior engineering, a reliable drive system, and the use of highly durable materials, CONSTMACH offers its customers not just equipment, but a sustainable investment. If you are looking for high performance, low energy consumption, and easy maintenance in your production line, CONSTMACH Vibrating Screens are the most suitable solution for your needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-term use advantages.