Used Insert 500V/Schuttle for sale (1,892)

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Fodpfeu Rwa Iex Aa Nogb Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. Fgedpfxoharwyo Aa Nob GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Weight approx. 800 kg good condition

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003497 - Manufacturer Code: 2-083-01-0116 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service. Please contact us. Fodoymd Udepfx Aa Negb

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Fjdpfxsxk T Ige Aa Njgb

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Fodsxllclepfx Aa Njgb

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Fgedou Dbkdspfx Aa Nsb Weight: 5600 kg Height 2800 mm

Year of construction: 2010, condition: used, machine/vehicle number: INS5, Technical Specifications & Performance Data This Divider Inserter by OMA is engineered for reliable insertion of cardboard partitions into cases at high efficiency. Built in 2010, it offers robust performance for industrial packaging and beverage production, making it a strong addition to any used bottling line or second hand packaging setup seeking improved product protection during transport. Manufacturer: OMA Model: INS ALV Year: 2010 Production speed: approximately 1200 cases/hour Fodpsyh E Avsfx Aa Nogb Case formats: 6-bottle and 12-bottle cases Head configuration: single-head Included equipment: vibratory belt/conveyor for partition handling Electrical supply: 230 V, 50 Hz Installed power: 1 kW Weight: 1000 kg Marking: CE Advanced Automation & Control Systems The machine is equipped with a dual-sided control interface, featuring a redundant keypad on both sides of the frame to improve operability and access for line personnel. This layout streamlines adjustments, format changes, and maintenance tasks, enabling safer and more efficient operation. The single-head design supports consistent partition placement with reduced complexity and quick routine checks. Production Line Integration Capabilities Designed for seamless integration within industrial packaging lines, this Divider Inserter can operate inline with case erectors, bottle/case packers, and case sealers. It suits both retrofit projects and new installations in beverage production environments. Format compatibility includes 6- and 12-bottle case patterns, with straightforward changeover procedures supported by the dual-sided controls. The unit handles corrugated carton cases and cardboard dividers commonly used to protect bottles during logistics, making it a practical fit for bottling equipment and broader packaging machinery layouts. Machine Condition & Maintenance History The machine is currently in production and available for testing. Its ongoing operation demonstrates maintained performance and readiness for integration into a working used bottling line or industrial packaging line with minimal commissioning time. Operational Performance & Versatility With a throughput of approximately 1200 cases per hour, the OMA INS ALV supports mid-speed lines requiring dependable partition insertion to minimize bottle-to-bottle contact. The included vibratory belt ensures smooth partition feeding and orientation, enhancing process stability and reducing jams. The single-head configuration prioritizes accuracy and mechanical simplicity, which translates into consistent results and lower routine service requirements. Installation Requirements & Site Preparation The unit operates on a standard 230 V, 50 Hz electrical supply with a modest installed power of 1 kW, supporting energy-efficient operation. Its 1000 kg construction delivers stability during high-duty cycles while remaining compact enough for typical packaging hall layouts. The machine’s footprint is well-suited for integration along existing conveyor systems upstream of case sealing and downstream of case packing. Safety Standard...

Condition: used, Year of construction: 2013, Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Fodpfx Aswp E Hzoa Negb Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam Fgedpfx Asyt Nm Ssa Njb GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 18GG1012, Neopost DS 180i inserter from test condition, practically NEW, barely used, only 17,245 inserts to the counter! The machine was fully inspected by a licensed technician on May 19, 2025 and is in absolutely mint and perfect condition, with no defects. Includes conveyor belt! Technical Specifications Fgedpfxewl Ihto Aa Nsb Max. Volume (per month) 180,000 Cycle speed up to 4,500 envelopes/hour Optional up to 5,500 envelopes/hour Collation capacity (multiple feed) up to 6,900 sheets/hour Optional up to 9,400 sheets/hour Envelope sizes: C6 (optional), A4, C6/5, C5 Adhesive container capacity: 10 liters Folding capacity: up to 8 sheets (80 g/m2) 22" touchscreen monitor: yes Unlimited job memory Automatic job setting: yes Document/feeder capacity: up to 500 or 1,000 Envelope capacity: up to 800 Document paper thickness: min. 70 g/m2 - max. 120 g/m2 Max. insert thickness*: 4 mm *depending on the feeder module used Folding types: single, C-fold, zigzag, double parallel, and no-fold

Condition: used, Year of construction: 2007, functionality: fully functional, Envelope inserting machine KERN 3500 Twin Channel K990 Fgsdpfxjxfwfxj Aa Njb Year of production: 2007. Counter: 145 million Full service contract. I have 2 machines for sale in this configuration.

Condition: used, Year of construction: 1992, Anleger - CMC Einsteckmaschine - Feeder - CMC Inserting machine RITMICA Universal H-200Year 1992 - Serial-No. H-200 2 Feeder for CMC Inserting Machine Fjdpfxeh Ax Sno Aa Nsgb Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1979, machine/vehicle number: 4015, Spiraleindrehmaschine - Spiral insertion machine Renz DPSTYear 1979 - Serial-No. 4015 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Fgsdpfeh Axnysx Aa Neb

Condition: used, Year of construction: 1998, machine/vehicle number: 24124, Kuvertiermaschine / Envelope Inserting Machine Bell + Howell Vitesse BH900 C5 Year 1998 6 Beilagenstationen / 6 Supplement stations Briefwender-Rollenauswurf / Letter turner-roll ejector verarbeitet Briefumschlagformat von C6 bis C5 / processes envelope format from C6 to C5 Geschwindigkeit mechanisch max. 10.000 Takte/Std. / Speed max. 10.000 cycle/h Fgodpsupy Tasfx Aa Nsb Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 2907000, Kuvertiermaschine / Inserting machine Fracotyp-Postalia FPi4530Serial-No. 10EY5510 Online-Video-Inspection by Skype-Video Fgodsmkninjpfx Aa Nob We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), For sale: Professional milling head from the renowned brand JEB ToolTechnic Zerspanungswerkzeuge. Model: S2138.063.R06IK Cutting diameter: Ø63 mm Mounting: SK40 Number of insert seats: 6 Condition: used, in very good technical condition, equipped with cutting inserts – ready for use. This head is ideal for machining steel and cast iron in both roughing and finishing operations. Proven in production, ensures high performance and precision milling. Fjdpfx Aaoxk T N Ro Nogb

Condition: good (used), Year of construction: 2007, KERN 2500 inserting machines for handling C5 and C6/5 envelopes. The set consists of a complete working line and a second set of this type of machine for parts. Fgodpfx Aaswfglws Nsb Year of production: 2007 + set of machines for parts from 2004. List of modules: - automated input module (single A4 sheets) ensures efficient paper feeding. - control module reading, grouping and folding (Grouping and Folding Station – GUF). - 2 modules for adding leaflets, each equipped with 2 feeders. - inserting module - envelope feeder and sealer module with a panel for handling applications and settings. - final conveyor belt with containers for incorrect enveloping. Both sets were used in one company. The first set was installed in 2004 and the second in 2007. The machines were used until 2020, when the company purchased new machines. At that time, the machines were renovated using components from the second set. Since 2020, the renovated machines have been used sporadically and the second set of machines was used for parts. .

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Motorized Roller table "RBO" with 90° conveyoring belts B) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) C) Connection system, with up-side-down turning machine (180°) "RBO" Mod. Ribaltatore D) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units (1 left+1 right) with 4x BH18 heads with 18 spindles each (36 right + 36 left) total 72 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) Fjdpfx Aoyhqa Aoa Nogb E) "BIESSE" RD dowels insertion machine No.2 horizontal units (1 right+1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles F) Brush-cleaning machine "WANDRES"

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, C4 inserting machine Octoplus 4500, 6 stations (4 grippers + 2 friction feeders). Completely overhauled in 2022. Suitable for block thickness up to 20 mm. Price on request. Fgjdpfjypgi Ajx Aa Nob

Condition: excellent (used), End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm Fjdpfx Aoyhcg Uea Negb -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 -Order No.: 229.810.00 -Weight: 7.8 kg

Condition: like new (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 80 mm Fsdecwb Nfspfx Aa Njgb -Milling height: 75 mm -Adjustment: SK50 -Manufacturer: WIDIA -Type: 06306 Widax M30 -Number: 3x milling cutters available -Price: per piece -Dimensions: 224/100/H100 mm -Weight: 5.6 kg

Year of construction: 2005, condition: used, Book mark inserting machine Sigloch LEH 1 Fsdpfx Aaoyid Rbe Nogb Year: 2005 Description: - Right hand infeed - Scissor - Delivery to the left Book block format (max): 350 x 240 x 70 mm Book block format (min): 10 x 65 x 3 mm Max. mechanical speed: 20 mtr/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Manual Socket Inserter Fgodpfx Aouxt Ahoa Nob

Condition: used, Envelope inserting machine Neopost (Quadient) DS200 Fgsdpeyttidefx Aa Nsb Configuration: DS-200 inserting system Tower Feeder 2 with reading Insert feeder Insert feeder with reading Output conveyor belt Machine under continuous maintenance contract until 31.1.2026! Last service in 12/2025! Low operating hours.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MP2510892, input voltage: 400 V, Hydraulic Clinch Press Miller MP645E, with vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-97KN (10 ton) Throath depth 650mm Zylinder stroke 200mm Travel speed 110mm/sec. Cycle time 3sec. 1200/hour Size H 2140mm x W 1070mm x D 1550mm Weight ca. 1500 Kg Electrical connection 400V, 3.0 KW Fgodpoirnaqjfx Aa Nsb Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%