Used Isag Imaging Solutions Ag Easyframe for sale (14,070)

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa Pgsdpfox Rqkuex Alwst 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. Pedpfeyt Nm Ejx Alwogt The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Pedpsyit Ulsfx Alwogt

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 5700 was manufactured in 2024. It features an X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,300 × 570 mm and a maximum table load of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 5700 vertical machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • Absolute feedback system • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Table size: 1,300 × 570 mm • Spindle taper: BIG PLUS BT40 Pgodezlg Uiepfx Alwst • Spindle motor power: 15 / 11 kW • Spindle head cooling system • Tool magazine type: geared driven • Tool holder: BIG PLUS BT40 • Rapid traverse rates: X/Y 36 m/min, Z 30 m/min • Through-spindle coolant: 2.0 MPa (20 bar), 4.0 kW • Flood coolant pump: 0.4 kW, 0.15 MPa, 40 L/min • Built-in transformer • Electrical line filter • Ethernet interface • Data server & memory card: 1 GB • Program storage capacity: 5,120 m (2 MB) • 1,000 program capacity • AICC II – 200 blocks • iHMI easy operating system (EZI & Machining Cycle) Additional equipment • Hinged belt chip conveyor (right side) • Belt-type oil skimmer • Coolant gun • Air blower • Air gun • Portable MPG handwheel • Additional axis preparation (1-axis wiring & pneumatics)

Condition: excellent (used), Year of construction: 2010, Converging Solutions Converging Conveyor Model: Integrator 3 Syncro Serial number: CS5653 Year of construction: 2010 230 V, 16 A Belt width: 680 mm and (6x) 320 mm Clearance: 680 mm x 190 mm Total dimensions: 2280 mm x 850 mm x 1240 mm. Pgodpjv Tx Uzofx Alwjt

Condition: ready for operation (used), Year of construction: 2024, spindle motor power: 22,000 W, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 105 mm, controller manufacturer: FANUC, controller model: i Series, number of axes: 4, This 4-axis DN SOLUTIONS PUMA 2600Y II was manufactured in 2024. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a main spindle speed of 4,000 rpm and a turret with 12 tool stations. If you are looking to get high-quality turn-mill capabilities, consider the DN SOLUTIONS PUMA 2600Y II machine we have for sale. Contact us for further details. • 15" color touchscreen display • iHMI Easy Operating System (EZI & Machining Cycle) • Absolute feedback system Pgedpfx Alszlqpqjwst • CE certified • Metric configuration • Power supply: 3 Phase AC 380V / 50Hz • Number of axes: 4 (X, Z, Y, C) • Maximum turning diameter: 376 mm • Maximum turning length: 760 mm • Bar capacity: 81 mm • Main chuck size: 255 mm (10") • Hardened & ground hard jaws • Main spindle motor power: 22 / 15 kW • Built-in spindle design • C-axis functionality • Milling spindle power: 7.5 / 1.5 kW • Live tool speed: up to 10,000 rpm • Turret type: BMT65P • Number of tool stations: 12 • Automatic electric tool setter • Programmable live tailstock • MT5 live center • Coolant pump: 1.1 kW / 1.0 MPa / 20 L/min • Flood coolant for rotary tools • Coolant tank on right side • Thermal compensation structure • Chuck clamp confirmation • Bar feeder interface • Embedded Ethernet • Program storage: 5,120 m (2 MB) • 1,000 program capacity • 128 tool offset pairs • 8 work coordinate systems • Built-in transformer • Electrical line filter • 3-color signal tower (red / yellow / green) • Tool number display Additional equipment • Hinged belt chip conveyor (right side) • Belt-type oil skimmer • Parts catcher with collection box • Coolant gun • Air gun

Condition: excellent (used), SLM Solutions SLM 500 HL Professional system for the additive manufacturing of metal components using selective laser melting. Suitable for industrial applications, prototype construction, toolmaking, aerospace, medical technology, and series production. Technical data Manufacturer: SLM Solutions Type: SLM 500 HL Year of manufacture: 2015 Build volume: 500 x 280 x 365 mm Laser configuration: Quad-fiber laser 4 x 400 W Max. build rate: up to 105 cm³/h Layer thickness: 20 µm to 75 µm Min. feature size: 150 µm Beam focus diameter: 80 - 115 µm Max. scanning speed: 10 m/s Supply voltage: 400 V / 50 Hz, 3/N/PE Control voltage: 24 V DC Rated current: 36 A Heating power: 2.4 kW Protection class: IP50 Compressed air requirement: 50 l/min at 6 bar Special features Patented multi-beam technology Automatic powder management PSX sieving station PRS unpacking station Laser class 1 CE marking available Pgodpfx Ajza Ethjlwot Service / Operating history The system was used exclusively for processing aluminum from the beginning and operated under a nitrogen atmosphere. It operated reliably until decommissioning. During the last maintenance, the oxygen sensors, including the evaluation unit, were updated to the latest version. The system was then professionally decommissioned. Cooling unit Manufacturer: Riedel Type: WKS 101.2M5LE.I Year of manufacture: 2016 Refrigerant: R134a Filling quantity: 3.0 kg Operating pressure HD: 18.7 bar Protection class: IP54 Scope of delivery according to delivery note SLM 500 HL laser melting system, approx. 2680 kg Riedel cooling unit WKS101.2M5LE.I, approx. 200 kg SLM filter system, approx. 150 kg SLM unpacking station PRS 500, approx. 855 kg SLM sieving system PSX 500, approx. 690 kg Logitrans lifter LFSM 1002/1620, year of manufacture 2015, approx. 550 kg 2 x SLM build cylinders, each approx. 205 kg SLM spare parts / piping Dimensions / Weight Complete system according to manufacturer's specifications: approx. 5200 x 2800 x 2700 mm Weight according to manufacturer's specifications: approx. 3100 kg in operating condition approx. 2400 kg without powder Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Inspection and testing on-site are possible by arrangement and are highly recommended. Important note: All information is provided to the best of our knowledge based on available documents, software displays, manufacturer data, delivery note and nameplates. Deviations in technical data are possible. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. Pgedpfx Aljyt Nhvswet The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: MST-0800C0028, For sale: automatic plastic injection molding machine ATEC HQ-800QL. Year of manufacture – 2005 (04), Serial No. MST-0800C0028. Hydraulic system with digital control panel, suitable for serial production of plastic parts. Power supply 380 V, 50 Hz, 3 phases. Used, fully equipped, previously operated in production. Suitable for manufacturing technical, packaging, and industrial plastic components. Inspection on site possible. Pgjdpfjx Nhy Rex Alwet

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm Pgedpjy Sl Uqefx Alwet First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Pjdpfxjxtvb Uo Alwsgt Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: good (used), functionality: fully functional, Vertical bag packing, filling and sealing machine Brand Jasa Packaging Solutions B.V. Model PMT Horizontal seal length 270 mm Material width 620 mm Overall dimensions: 2800 mm x 1450 mm x 2350 mm. Pedev Utd Hjpfx Alwsgt

Condition: used, mileage: 20,000 km, power: 100 kW (135.96 HP), first registration: 09/2022, fuel type: diesel, empty load weight: 2,180 kg, maximum load weight: 1,320 kg, overall weight: 3,500 kg, wheelbase: 3,520 mm, color: white, emission class: euro6, number of seats: 3, loading space volume: 9.3 m³, loading space length: 3,520 mm, loading space width: 1,370 mm, loading space height: 1,930 mm, construction height: 2,694 mm, working width: 2,052 mm, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, sliding door, soot filter, traction control, trailer coupling, GVWR up to 3.5 tons, shelving system, automatic transmission – Hi-Matic (8-speed), air conditioning, trailer hitch up to 3.5 tons, central locking with remote control, exterior mirrors electrically adjustable and heated, electric windows, driving assistance system: hill start assist (AAS), cruise control, speed limiter 160 km/h, all-season tires, daytime running lights, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, hands-free system, storage compartment on the dashboard with USB connection, tinted windshield and side windows, anti-lock braking system (ABS), electronic stability program (ESP), diesel particulate filter, sliding door cargo/passenger compartment right, immobilizer, paint: WHITE IC, rotating beacon, shelving system, wooden cargo floor with interior lining, steering column (steering wheel) height/length adjustable, rear door (opening angle 260 / 270 degrees), enlarged oil pan, audio/telephone controls on the steering wheel, compressor 170 ccm, exterior cargo area light above the rear doors, design: S-series, permissible total weight 3.50 t, trailer stabilization program (TSM), maintenance indicator, seats in the cab: double passenger seat, ceiling light in the cargo area, electronic brake force distribution, brake assist, rear axle suspension: parabolic, front axle suspension: transverse leaf spring, traction control system (ASR), generator 210 A, fuel tank: 70 liters, exhaust pipe on the left side, body/superstructure: high-roof van, wheelbase 3520 mm, drive type: rear-wheel drive Financing example * Cash price: 28,441.00 Euro * Down payment: 5,688.00 Euro * Term: 60 months * Net loan amount: 22,753.00 Euro * Effective annual interest rate: 6.49 % * Nominal interest rate (fixed) per annum: 6.30 % * Gross loan amount: 26,586.00 Euro * Monthly installment: 443.00 Euro Pgodpfxjyrp H Ae Alwot *Representative financing example from Targobank AG, Kasernenstr. 10, 40213 Düsseldorf for private customers, for which the car dealership acts as a loan intermediary. Creditworthiness required. The information also corresponds to the 2/3 example according to § 6a paragraph 3 PAngV. Over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. The listed equipment may need to be checked separately. Subject to change, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. Trade-in of your old vehicle. Retrofitting of: - Trailer hitches, also up to 3500 kg possible - Auxiliary heaters - Screen for reversing camera and/or navigation via mobile phone (Android Auto) - Reversing system with rear-view camera - Workshop equipment - Cruise control - Retrofitting of a tailgate lift and other individual solutions for your business needs possible for an extra charge.

Condition: new, Year of construction: 2025, functionality: fully functional, 120cm Endless UV LED Digital Scan Camera CCD Visual AI Printer Scan and print at the same time - no more stencils - any application - different images at the same time - enormous speed advantage Material width: 1200mm ENDLESS LENGTH due to conveyor belt Material height: 150mm (higher passage possible on request) Recommendation 3x Ricoh Gen5 for CMYK + white ( indicated price ) 4x Ricoh Gen5 for CMYK + white + varnish ( surcharge approx. 3500 Euro ) Pjdpst E Dk Uofx Alwjgt Including vacuum table Inclusive conveyor belt Including operator computer Including CCD Visual AI camera system Depending on the number of heads 12 - 40sqm/h or more With 2 heads approx. 12sqm per hour possible Machine dimensions: 2060mm x 2700mm x 1300mm Weight: approx. 500kg + pallet Machine power: 4500W

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. Pedpfx Alewy Uu Ajwjgt • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 300 mm Spindle bore: 52 mm Main spindle speed: 4,500 rpm Tool turret: 12 stations Podpfoyvfvuex Alwogt MACHINE DETAILS Machine weight: 2,200 kg EQUIPMENT Horizontal CNC lathe High-performance main spindle Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint User-friendly CNC control High reliability and low maintenance Control: FANUC CNC

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing, press feeding and metal forming systems, delivering high-performance and customized industrial solutions worldwide. Our press solutions are designed for punching, perforating, embossing and sheet metal forming applications. Depending on production requirements, we offer advanced servo punch press systems for flexible programmable production and high-speed mechanical presses for continuous mass production. These machines can be supplied as standalone units or integrated into complete coil-fed automatic production lines. ⚙️ AVAILABLE PRESS SOLUTIONS 🔹 SERVO PUNCH PRESS The Servo Punch Press is designed for precision, flexibility and intelligent production control. Key Features: 40 Ton punching capacity 6 tool stations for multi-tool operation Dual-servo controlled X-Y punching system Punching at programmable coordinates 22 kW hydraulic punching drive Up to 90 strokes per minute Automatic scrap conveyor system Advantages: High precision punching performance Programmable motion profiles Lower noise and reduced maintenance Energy efficient operation Fast setup for different part designs 🔹 PERFORATION HIGH SPEED MECHANICAL PRESS The High-Speed Mechanical Press is ideal for continuous perforation, embossing and repetitive punching operations in mass production environments. Suitable For: Sheet metal punching Perforating Embossing Tool & die applications High-volume production lines Advantages: High production speed Stable continuous operation Reliable mechanical drive system Ideal for repetitive operations Cost-effective mass production solution 🔧 ENGINEERING FEATURES Robust industrial machine construction Psdsy Anr Tspfx Alwogt PLC & HMI control systems Easy integration with feeders and automation lines Tooling flexibility based on product design Long service life and low maintenance structure ⚡ OPERATIONAL ADVANTAGES Two technologies for different production needs Flexible solutions from custom parts to mass production Standalone or turnkey line integration Improved efficiency and reduced downtime Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Sheet metal manufacturing Perforated panel production Electrical cabinets HVAC products Construction components Automotive parts White goods industry 🧩 OPTIONAL CONFIGURATIONS Coil feeding integration Decoiler & feeder systems Custom dies and tooling Conveyor systems Automation upgrades Turnkey production solutions 📸 REFERENCE PROJECTS Images and videos can be shared showing different press systems successfully operating in various industrial applications. Additional references and technical details are available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, Plastic processing line/installation or stand-alone machines for various applications. 1) Single-shaft shredder/mono-rotor shredder (various sizes), 18.5 kW or 30 kW 2) Conveyor belt with head pulley magnet or discharge screw, discharge height 2 meters 3) Grinding mill/crusher, 1000 series, 45 kW 4) Discharge system with silo/cyclone, blower, and big bag system/frame, and double outlet (stainless steel), outlet height 2.3 meters. In stock, viewing and testing possible by appointment. Machines and equipment can also be purchased separately. Pgsdpszv S Hrjfx Alwot Call us or send an email. For information: Please include your first name, last name, company name, and valid phone number in all requests.

Condition: used, mileage: 51 km, power: 125 kW (169.95 HP), first registration: 11/2025, fuel type: diesel, empty load weight: 2,310 kg, maximum load weight: 1,190 kg, overall weight: 3,500 kg, wheelbase: 4,215 mm, next inspection (TÜV): 11/2027, color: white, emission class: euro6, suspension: air, number of seats: 3, loading space length: 4,700 mm, loading space width: 2,000 mm, construction height: 2,290 mm, working width: 2,190 mm, Equipment: ABS, air conditioning, airbag, cable winch, central locking, compressor, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, trailer coupling, Navigation via mobile phone possible. Automatic transmission, air conditioning, trailer hitch, central locking with remote control, exterior mirrors electrically adjustable and heated, power windows front, on-board computer, cruise control, multifunction steering wheel, parking aid rear, exterior storage compartment, spare wheel, summer tires, light and rain sensor, daytime running lights LED, radio with Bluetooth hands-free system, touchscreen, USB interface, Apple CarPlay, Android Auto, air suspension with compressor, heat-insulating glass, storage package, tachometer, airbag driver side, anti-lock braking system (ABS), traction control system (ASR), comfort seats, center armrest, driver comfort seat - height-adjustable with armrest and lumbar support, start/stop system, particulate filter, service booklet maintained, body flatbed with winch and remote control, immobilizer, compressor, side marker lights, outside temperature display, power steering, LED work lights, tow ball for trailer transport on the loading platform, storage boxes left and right, rear window, mud flaps front, shift indicator, interior filter: pollen filter, co-driver's double seat multifunctional, storage shelf, permissible total weight 3.50 t, electronic brake force distribution, brake assist, steering column (steering wheel) height adjustable, electronic stability program (ESP), generator 185 A, body/superstructure: standard flatbed, wheelbase 4215 mm, drive type: front-wheel drive Financing example * Cash price: 43,792.00 Euro Psdpfx Ajx E U Itolwegt * Down payment: 8,758.00 Euro * Term: 60 months * Net loan amount: 35,034.00 Euro * Effective annual interest rate: 6.49 % * Nominal interest rate (fixed) p.a.: 6.30 % * Gross loan amount: 40,936.00 Euro * Monthly rate: 682.00 Euro *Representative financing example from Targobank AG, Kasernenstr. 10, 40213 Düsseldorf for private customers, for which the car dealership acts as a loan intermediary in an advisory capacity. Creditworthiness assumed. The information also corresponds to the 2/3 example according to § 6a para. 3 PAngV. Over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank; we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an additional charge. Export license plates available on-site. Trade-in of your old vehicle. Retrofitting of: - trailer couplings, also up to 3500 kg possible - auxiliary heaters - screen for reversing camera and/or navigation via mobile phone (Android Auto) - reversing system with rear camera - workshop equipment - cruise control - retrofitting of a tail lift and other individual solutions for your business needs possible for an extra charge.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Pjdpfx Aloz D Ifqswogt Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee.

Condition: excellent (used), Year of construction: 2010, operating hours: 1,318 h, functionality: fully functional, input voltage: 240 V, input frequency: 60 Hz, We offer a used Kodak NX Imager, model Flexcel NX Digital Flexographic System, year of manufacture 2010. Machine set includes: • Imager (Exposing unit) • Laminator • Vacuum cleaner Bonus: Densitometer Machines are in excellent technical condition Laser: 1,318 h, like new, tested Psdpfx Aoyrr I Aolwsgt Checked and secured for transport by authorized Miraclon service, documented with invoice RIP station requires update due to Windows 10 Full documentation included Cabling, TIL input glass included (disassembled for transport) Laser secured by Miraclon, also disassembled for transport Serial number: TT0531 Date of manufacture: 2010/09/15 Model: TST Rated voltage: 200-240 V Frequency: 50/60 Hz Rated current: 8 A Country of manufacture: China For any questions or if you require additional information, please contact us via email or telephone.

Condition: new, Year of construction: 2024, functionality: fully functional, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: Freecolor PS10157V C M Y K LC LM + White Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing. Dimensions: 2.30 x 1.98 x 1.34 m Weight: 650 kg 360-degree printing capability: bottles/round objects (additional cost) A1+ size 100x150 cm and a printing height of 70 mm are possible. 8 x 500 ml of ink can be supplied (additional cost). + Varnish function included. Software settings and printer explanation can be provided on request, throughout Germany/Europe (additional cost). Printing videos, etc., can be sent by email/WhatsApp. Podpod Hydcjfx Alwogt

Condition: new, Year of construction: 2023, operating hours: 4 h, functionality: fully functional, machine/vehicle number: N/A, overall weight: 6,000 kg, tank capacity: 2,000 l, power: 620 kW (842.96 HP), continuous power: 56,00,000 kW (76,13,872.00 HP), continuous power (apparent): 7,00,000 kVA, total length: 500 mm, total width: 180 mm, total height: 274 mm, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, noise level: 82 dB, rotational speed (min.): 1,500 rpm, type of input current: three-phase, warranty duration: 12 months, A new industrial diesel generator built into a sound and weather proofed canopy, constructed from galvanized steel and fitted with a residential exhaust muffler. Manufactured in the UK using UK and EU components, it has a bunded internal 2000ltr base fuel tank, a Scania DC16 078A-02-43 1500RPM water cooled diesel engine coupled to a European alternator and controlled by a Deep Sea Electronic Module. The generator is supplied with a special catalyst (SCR) system to achieve Tier 5 emissions compliant with a 2500ltr Urea tank(ad-blue). This is new still in the box, the installation is included via the European manufacturer of the system. The 82db sound level is measured at a1m distance from the generator, see attached images of the generator when under load test and relevant brochures. Psdperdzg Hefx Alwjgt

Condition: used, mileage: 5,340 km, power: 125 kW (169.95 HP), first registration: 04/2026, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2028, color: white, number of seats: 3, loading space volume: 25.3 m³, loading space length: 4,589 mm, loading space width: 2,191 mm, loading space height: 2,514 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, sliding door, traction control, trailer coupling, Automatic transmission, air conditioning, trailer hitch, second key with remote control, electrically adjustable exterior mirrors, electric front windows, on-board computer, hill-start assist, lane assist, adaptive cruise control, speed limiter, multifunction steering wheel, sliding door/partition, spare tire, all-season tires, LED daytime running lights, DAB radio, Bluetooth, hands-free system, emergency call system, tire pressure monitoring system, driver airbag, ABS, ESP, start-stop system, service booklet available, heated and manually foldable, RPM management/intelligent speed assistant, driver's seat height adjustable, cruise control system, reversing lights, side turn signals, cruise control, central locking. Financing example: * Cash price: 47,838.00 euros * Down payment: 9,568.00 euros * Term: 60 months * Net loan amount: 38,270.00 euros * Effective annual interest rate: 6.49% * Nominal interest rate (fixed) per year: 6.30% * Gross loan amount: 44,718.00 euros * Monthly installment: 745.00 euros *Representative financing example from Targobank AG, Kasernenstr. 10, 40213 Düsseldorf for private customers, for which the car dealership acts as a loan intermediary in an advisory capacity. Subject to credit approval. The information also corresponds to the 2/3 example according to § 6a Abs. 3 PAngV. Pgedpfx Aoz Da U Rslwjt Over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank; we will be happy to advise you. This offer is non-binding; no guarantee for equipment details. The listed equipment may need to be checked separately. Subject to change, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. Trade-in of your old vehicle. Retrofitting of: - trailer hitches, also up to 3500 kg - auxiliary heaters - screen for rear view camera and/or navigation via mobile phone (Android Auto) - reversing system with rear camera - workshop equipment - cruise control - retrofitting of a tail lift and other individual solutions for your business needs possible for an extra charge.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Radiant Vision Systems ProMetric I IC-PMI29-XB Imaging Colorimeter High-end industrial imaging colorimeter camera designed for precise luminance and color measurement in demanding applications. This system belongs to the renowned ProMetric I series, widely used in display testing, LED inspection, and automated quality control environments. 29 Megapixel high-resolution imaging colorimeter Accurate luminance and chromaticity measurement Scientific-grade sensor for repeatable and reliable results High sensitivity and wide dynamic range Designed for industrial and laboratory use Pedpfx Aozwd Hyolwsgt Compatible with Radiant Vision Systems software (TrueTest) Suitable for integration in automated inspection systems Applications Display testing (LCD, OLED, MicroLED) LED brightness and color validation Surface inspection and uniformity analysis Automotive display and lighting validation Industrial quality control processes Technical Specifications Model: IC-PMI29-XB Resolution: 29 MP (6576 × 4384) Measurement: Luminance & Color (CIE) Interface: USB / Ethernet Made in USA Condition Used unit in very good condition, removed from a professional industrial environment. Fully functional / Untested (adjust based on reality). What’s Included Radiant Vision Systems ProMetric I IC-PMI29-XB Camera Radiant Vision Systems HALCON USB License Dongle (Software Key) Radiant Vision Systems USB Flash Drive Radiant Vision Systems Electronic Component (P/N 10856) Original Protective Carrying Case Accessories as shown in photos