Used Jumbo Smart Dry for sale (3,303)

Condition: good (used), tires, solid rubber tires, forklift tires -Manufacturer: Rigdon, solid rubber tire Solid with rim -Tire size: 18x7-8/4.32 (180/70-8) Nwodpsv Df T Ssfx Aqvog -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Quantity: 1x tire available -Dimensions: Ø 390 x 155 mm -Weight: 21 kg

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 20 A -Connection: 230 volts Nwedpfx Aqeb A Hdzjvog -Number: 7 chargers available -Price: per piece -Weight: 18 kg/piece -functionally tested

Condition: ready for operation (used), Forklift truck Manufacturer: Jumbo Type: J60 DC12 Diesel Year of manufacture 1994 Payload: 6,000 kg Own weight: 9,260 kg Lifting height: 4300 mm Nsdevtwuaepfx Aqvjwg approx. 25,000 operating hours Sold due to switching to wheel loader All service and lubrication intervals verifiably completed according to the inspection book! All filters (hydraulic, fuel, converter, air) replaced annually. Engine oil filter including oil every 250 operating hours. Only B0 was used as diesel fuel. (no B7) immediately available - fully functional Location: Austria, near St. Pölten

Condition: used, functionality: fully functional, Year of construction: 2012, load capacity: 5,000 kg, lifting height: 6,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,150 mm, fork length: 1,200 mm, drive type: Diesel, Sideload forklift Mast type: Triplex Nwsdoyhilkopfx Aqveg Condition: Ready for operation and fully functional Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 8,259 h, load capacity: 6,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,800 mm, fork length: 1,300 mm, drive type: Diesel, Sideload forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Nedpfx Asycm Dysqvjwg

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 5,932 h, load capacity: 5,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,886 mm, fork length: 1,400 mm, drive type: Diesel, Sideloader Mast type: Standard Nwsdovizz Aopfx Aqvjg Condition: Ready for use and fully functional Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 5,958 h, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, fork length: 1,200 mm, drive type: Diesel, Sideloader Mast type: Triplex Nwsdpfx Aqoviz Dqsvsg Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2005, load capacity: 5,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,600 mm, fork length: 1,400 mm, drive type: Diesel, Sideloader Njdpfx Aqsu Ac Ihsvswg Mast type: Standard Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2005, load capacity: 7,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,700 mm, drive type: Diesel, Sideloader Mast type: Standard Condition: Ready for use and fully functional Nodpfx Aqou Ac Hksvewg Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 8,694 h, load capacity: 7,000 kg, lifting height: 4,500 mm, mast type: duplex, construction height: 3,150 mm, fork length: 1,200 mm, drive type: Treibgas, Sideloader Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Fork positioner, Nwedpfx Aou Ac Emeqvjg

Condition: used, functionality: fully functional, Year of construction: 2003, load capacity: 7,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,600 mm, fork length: 1,400 mm, drive type: Diesel, Sideloader Mast type: Standard Nwodju Ac Etspfx Aqvog Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2005, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, construction height: 2,900 mm, drive type: Diesel, Sideloader Mast type: Duplex Condition: Ready for use and fully functional Nwedpfx Aeu Ac Ibjqveg Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 7,000 kg, lifting height: 6,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, fork length: 1,200 mm, drive type: Diesel, Sideloader Nedpfx Asu Ac E Toqvjwg Mast type: Triplex Technical condition: good Fork positioner,

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 6,963 h, lifting height: 5,500 mm, fuel type: gas, mast type: triplex, construction height: 2,675 mm, fork length: 1,400 mm, drive type: Treibgas, Sideloader Mast type: Triplex Technical condition: good Nwjdpsu Ac Hwofx Aqvsg

Condition: used, empty load weight: 6,560 kg, maximum load weight: 18,440 kg, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 09/2017, loading space length: 13,700 mm, loading space width: 2,540 mm, loading space height: 850 mm, wheelbase: 7,500 mm, color: blue, gearing type: other, driver cabin: other, Equipment: ABS, additional headlights, compressed air brake, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: Length 13,700 mm x Width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminum ramps, 3,000 x 400 mm, laterally movable * ROR axles * Air suspension * Haacon spindle supports Nwedpfxsxu Nnwj Aqvog * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase 7,500 mm + 1,250 mm * Gross vehicle weight possible: 27,200 kg * Unladen weight: 6,560 kg * Payload possible: 20,640 kg If a new general inspection (TÜV) is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new general inspection (TÜV), without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspections are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect information in this offer. Buyers are required to independently satisfy themselves as to the condition and specification of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bosch Rexroth, controller model: Han´s 901, laser type: fiber laser, laser source manufacturer: Han´s Laser, laser hours: 20 h, laser power: 12,000 W, laser wavelength: 1,050 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, table length: 3,000 mm, table height: 700 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, cutting speed: 10,000 mm/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 2,150 kg, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 10,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Trade Show Machine, New Machine at an Unbeatable Price!!! The machine offered here is a new trade show model from year 2025, which was exhibited at the EMO show in Hanover in September 2025 and is now looking for a new owner. The machine is new! Demonstration unit! The original list price for this machine is €295,000. Our unique offer for this machine: €199,000!!! including delivery within Germany, installation, and training. No hidden additional costs. The machine can be inspected from October 2025 and tested from December 2025. Cutting samples and cutting videos are available. From here, you will find the machine description. Nwodpfx Aqoxlt Hfsvog G3015 HF Expert 12kW Fiber Laser Cutting Machine 1.5 x 3m with hydraulic shuttle table and extraction system, including delivery, installation, CAD CAM software, and training. Our high-end fiber laser cutting system features premium components and a distinctive design Cutting area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 150 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 10,000 Width [mm]: 2,550 Height [mm]: 2,200 Maximum sheet weight [kg/table]: 2,150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity (quality cut/separation cut) Steel: 30mm/40mm Stainless steel: 25mm/30mm Aluminum: 25mm/30mm Brass: 14mm/16mm Suitable for processing the following materials: Steel, stainless steel, aluminum, copper, brass, titanium, and nickel alloys Fully enclosed for laser safety Compact design saves shipping costs and reduces installation time Hollow structure design suitable for up to 60 kW Improved access via a full-length side sliding door Ergonomic loading and unloading for small workpieces High load capacity for thick materials thanks to hydraulic shuttle table High dynamics and productivity due to powerful controls and motors Integrated control cabinet and laser source with maintenance-friendly access Various automation solutions available Fast service response thanks to remote service support Fully enclosed machine with OD5+ laser safety glass windows CE compliant The control cabinet, laser source, pneumatic system, lubrication system, and the table drive motors are fully integrated into the main frame. Simple visual inspection via the side sliding door Convenient loading and unloading through the side sliding door Easy cutting of a wide variety of small parts Faster response times for demo cuts Higher dynamics & productivity Thanks to the optimized machine frame and extruded aluminum gantry, equipped with the fast real-time controller 'Han’s 901 (Rexroth)' and powerful Rexroth motors, the HF Expert achieves exceptionally high speeds and acceleration. Configuration and component selection Control system: Han’s 901 (Rexroth, Germany) Servo drives: Rexroth, Germany Cutting head: Han’s Laser Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Shuttle table: Han’s, China

Condition: excellent (used), Year of construction: 2014, Ilapak Smart Flow Wrapper Njdpowttcxefx Aqvowg Zodiac coder Suitable for clear or printed film In everyday use Adjustable infeed box In excellent condition

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 265771, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 195 mm, travel distance Y-axis: 560 mm, workpiece weight (max.): 20 kg, The technical data is based on manufacturer specifications. The seller cannot guarantee its accuracy! TECHNICAL DETAILS Travel X-axis: 195 mm Travel Z-axis: 560 mm Maximum spindle speed: 5,000 rpm Rapid traverse X-axis: 30 mm/s Rapid traverse Z-axis: 33 mm/s Maximum turning diameter: 350 mm Nodpfx Aqey Saiievewg MACHINE DETAILS Control: Mazatrol Smart Main power circuit: 3-phase AC Main power circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current consumption: max. 53 A Main motor voltage: 400 V Rated power: 29.1 kVA Dimensions & Weight Machine dimensions (L x W x H): 2,650 x 1,700 x 1,700 mm Machine weight: 4,500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info. Nwjdpfxeq Nfuzj Aqveg

Condition: excellent (used), mileage: 1,22,600 km, power: 294 kW (399.73 HP), first registration: 08/2013, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space volume: 15 m³, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, fog lights, parking heater, seat heater, spoiler, - Adaptive cruise control - Heated mirrors - Power brake booster - Roof spoiler - Air conditioning Nwedsy Uriyepfx Aqvsg - Refrigerator - Air suspension - Air-suspended seats - Air horn - Beacon light - Disc brakes - Heated seats - Sun visor - Stability control - Auxiliary heater (park heater) - Toolbox - Power take-off (PTO) SCANIA with J. Hvidtved Larsen FlexVac 311 suction loader! Only 298 operating hours! SCANIA P400LB6X2*4HNB, Euro 5, Opticruise transmission, 122,602 km, 14.5 m³ dry vacuum unit (stainless steel), year of manufacture: 2013, 9,000 kg front axle, 3rd axle liftable and steerable, remote control, refrigerator, first registration: 27.08.2013, air conditioning, electric windows, Webasto (additional heater), air suspension, ABS, overall length: 9,129 mm, overall height: 3,895 mm, overall width: 2,550 mm, wheelbase: 4,900 mm, tyres: 385/55R22.5 (90%) and rear 315/70R22.5 (90%), electric windows, radio/CD player, diesel tank: 400 liters, first owner, complete service history, last technical inspection at 122,099 km (24.01.2026), next service at 122,600 km (21.04.2026)… The truck is clean and fully functional! Superstructure by “J. Hvidtved Larsen FlexVac 311”: Tipper body with 14.5 m³ capacity made of stainless steel, vacuum/pressure pump, insulated with heating for winter operation (operating temperature range -20 °C to +50 °C), hydraulic suction arm, remote control, vacuum/pressure pump (KAESER OMEGA 82 P-V) with only 298 operating hours, suitable for: waste, water and air… The superstructure is clean and fully functional! Price: € plus VAT. VAT ID number. Stockholm, Sweden More & Application areas: * Vacuum loading of loose and dusty materials such as gravel, ash, slag, cement, lime, mill scale, etc., vacuum loading of sludge, sediment or liquids, * Dust extraction and suction of industrial plants, warehouses, tanks, silos, conveyor belts, unloading points, etc., * Pressure loading of loose materials. * Reactor cleaning * Tank cleaning * Cleaning of ventilation systems * Silo cleaning * Factory cleaning/dust removal * Biogas plant cleaning (WKF, ZKF) * Sand filter cleaning * Catalyst bed replacement * Specialized industrial cleaning services The dry suction vehicle is designed for the most demanding dry suction tasks, but can also be effectively used for wet operations. The flexible suction unit can be optimally adapted to any application, regardless of whether suction is from below or from above. The filter chamber is optimally designed and features a large hydraulic discharge flap, which makes emptying simple and efficient. Using a specially developed ejector, dry materials can also be conveyed upwards very effectively. All work functions can be controlled via remote control. General information Applications: cleaning, construction, demolition, ground drainage, trenching, earthworks, site management, and agriculture Technical information Engine displacement: 12,740 cc Transmission Transmission: Opticruise, semi-automatic gearbox Axle configuration Brakes: disc brakes Suspension: air suspension Front axle: tyre size: 385/55R22.5; max. axle load: 9,000 kg; steerable; axle brand: Nokian Hakkapelitta; tyres...

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Nwodpfoq Igyvjx Aqvjg Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Average power consumption: 4.0 kWh Additional equipment and features: Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. Nwsdjxfiw Tjpfx Aqveg If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 1,400 m³/h, arm reach: 2,000 mm, Welding fume extractor, dust extraction unit, self-cleaning, pneumatic, vacuum filter by Plymovent Model: The Smart "ONE" Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter element in very good condition. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. 1.1 kW three-phase fan Capacity up to 1400 m3/h Filtration surface: 20 m2 Wall-mounted extraction arm, 2 m length Nwedsy Shb Hjpfx Aqvsg Stock number: 1135

Year of construction: 2018, condition: used, The year of manufacture refers to the final acceptance of the system; individual components may differ in age. Workpiece dimensions up to a maximum of L x W x H: 8,000 x 2,000 x 2,000 mm, maximum crossbeam load: 2,000 kg/carriage, material: steel. Pos. 1: Washing booth, Jumbo-Clean with stainless steel interior for degreasing/phosphatizing of steel, either automated or with manual spray lance. Pos. 2: 1 set of belt filters. Pos. 3: 1 automatic spray ring for the Jumbo-Clean washing booth, including a central lance. Pos. 4: 1 fresh water treatment system. Pos. 5: 1 manual conveyor with 1 electric cross-travel carriage. Pos. 6: 1 lifting/lowering station, Jumbo-Lift 2000, integrated into the cross-travel carriage. Pos. 7: 1 indirect gas-heated flash-off oven/powder drying oven/wet coating drying oven, door opening W x H: 2,800 x 3,100 mm, clear length: 9,500 mm, overall W/H/L approx.: 4,000/5,000/10,000 mm. Pos. 8: 1 end-face powder coating extraction system for an on-site painting booth for spraying and drying operations. Pos. 9: 1 manual coating unit, OptiFlex(R)2. Pos. 10: 1 structure for on-site steel construction. Nwjdpfx Aoy T Nzdjqvsg Pos. 11: Control cabinet.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, MAZAK QUICK TURN SMART 200M 500U Max. turning diameter: 360 mm Max. turning length: 532 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Nwedpfx Aqsy D Awtjvog Max. bar diameter: 65 mm Machine is equipped with: - Mazatrol Smart CNC control - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis - Interface for bar feeder - automatic parts catcher - NC tailstock - high-capacity coolant pump - chip conveyor, side ejection - 8 static tool holders - 2 driven tool holders