Used Kieselmann Disc Valve Dn65 for sale (12,956)

Condition: used, loading space length: 1,90,000 mm, loading space width: 30,000 mm, loading space height: 8,150 mm, total width: 30,000 mm, Year of construction: 2006, Equipment: ABS, Goldhofer STZ-H6-57/80A Telescopic Lowboy Trailer for Railcar Transport                                 Approval          Technical 1 Speed:     80 km/h               65 km/h Fifth wheel load:               23,000 kg             26,000 kg Rear axle load:       10,000 kg             11,000 kg Total weight:     83,000 kg             92,000 kg Payload:                 52,500 kg             61,500 kg Tare weight (without accessories):         30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Height: 235 mm Fifth wheel height: 1,350 mm DLR front: 1,420 mm Lasdpsyfvypofx Apdeg DLR rear: 2,700 mm Kingpin: 3.5 inches Inclination: inclined 10 degrees Front corners: inclined 45 degrees Decking: Spruce 50 mm Fifth wheel supports: mechanical Width with sideboards: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically raisable and lowerable with mechanical support tube and hydraulic support cylinders Hydromechanical forced steering (2-circuit steering) in a low-profile design (height 235 mm) with adjustable guide elements and THP steering cylinders. Loading platform: Type: Platform Ratable: No Length: 13,000 mm Width: 3,000 mm Decking: Steel sheet/Spruce 50 mm Wheel wells: No Extensions: No Extendable: single-telescopic Length 1: 10,000 mm Loading heights (loaded) Loading height 1: 815 mm Extendable loading platform, designed as an outer and inner tube construction, with a fixed loading platform section of 1,070 mm in length at the front. Bolt-tab coupling integrated into the fixed loading platform section for connecting railcar bridge extension beams; the welded track rails serve as a rail track in the gauge widths of 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension stages by spring accumulator cylinders and conical bushings. Loading platform height on the frame center tube (outer tube) approx. 815 mm (+/- 130 mm) Loading platform height on the embedded rail elements approx. 790 mm (+/- 130 mm) Rear suspension: Suspension type: Standard Loading height loaded: 815 mm Width: 3,000 mm Track width: 1,360 mm Decking: Steel sheet Extensions: No Wheel wells: No Excavator well: No Axles: Number of axles: 6 Lift axle: see accessories Axle type: Curved steering knuckle Axle equalization: Hydraulic Axle manufacturer: BPW/Eco Riding positions: 1 Axle stroke (1) +/-: 130/130 mm Axle stroke (2) +/-: 0/0 mm Raise/lower valve: Yes 1st axle pneumatically liftable with lift bellows Steering: Number of steering axles: 6 Steering axle arrangement: all steered Maximum steering angle: 45° degrees Steering type: Hydraulic 2-circuit Tires: Dimension: 235/75 r 17.5 143/141 J Tire type: Twin Rim type: Disc Rim centering: Center-centered Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS connection spiral: No Parking brake: Spring accumulator EBS: No ECAS: No Note: Brake calculation No.: GH 4324S Suspension note: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow transverse outriggers in between (aluminum covers see above Accessories) Controls protected on the left in the direction of travel...

Condition: used, Year of construction: 1995, Beer clarification plant with a self-discharging separator. The separated spent grain is temporarily stored in a 55 hl conical stainless-steel tank. Additional title: Disc centrifuge for the preliminary clarification of beer Capacity: 20000 l/h Volume sludge tank: 5500 l Material: stainless steel Lodpfxszizh Ss Apdjag Position: standing on feet Features: Separator; sludge tank; pump; flow measurement; turbidity measurement; control cabinet with touch-screen display; special tools; various pipes, pipe panel and valves

Condition: used, maximum load weight: 28,880 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2003, loading space volume: 49 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2003, Equipment: ABS, 3-axle Schrader Tank Trailer 49m³ VIN: 1S82316 Chassis / Accessories: * 3 x BPW Eco Plus axles with disc brakes * Air suspension * Lift/lower function * Drop-down supports * Tires: 385/65 R.22.5 * Alcoa aluminum rims * Remaining tread depth: 1st axle: 20/30% // 2nd axle: 30/50% // 3rd axle: 30% * 1x storage box * 1x spare wheel holder Superstructure: * Schrader chemical tank trailer * Volume: 49 m³ * ADR FL/AT specification * 5 compartments * 1st: 7,500 l 2nd: 7,500 l 3rd: 20,000 l 4th: 7,000 l 5th: 7,000 l * 6 dome covers (20,000-liter compartment with two dome covers) * 5 outlet valves * Overfill prevention F.A. Sening Weights: * Gross weight: 38,000 kg * Payload: 28,880 kg * Unladen weight: 9,120 kg Other features: * German vehicle Lodpsxzmbbjfx Apdjag * ADR FL/AT * SP valid until 07/2026 * 1 previous owner New main inspections / safety checks or weight upratings/deratings are possible upon request. We are happy to assist you with obtaining export/temporary license plates, and we can also arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for typographical or spelling errors. Subject to changes, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner to customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. Customer satisfaction is especially important to us, which is why we offer an outstanding all-round service package and provide a competent contact person who will support you in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to help you load your purchased vehicles. Organization of special transports We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to help you obtain export or temporary license plates. Handling of customs formalities We are happy to assist you with customs matters.

Condition: good (used), Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, gas solenoid valve Ljdpfogh Dwvsx Apdoag -Manufacturer: Kromschröder, gas solenoid valve -Type: MK 5 R3 B2891 -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm -Weight: 7 kg

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Ledpezpbazjfx Apdoag Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: used, machine/vehicle number: 19751, Valve air-water TR 618A screw-on 51MSW 15.7 mm straight Alligator 544.503 / RAL 7040 >38" window grey Complete wheel consisting of: 420/85 R 38 Ceat Farmax / R85 144 A8/144 B TL Disc wheel: 1 x 15 X 38/W GRA ET-10 S=15 m 1 x LK / 8/203.2/149.8/2 Ledpfor Hni Ssx Apdjag

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm Lsdpfx Asrfw Ikspdeag 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve Laodpfed I I Hnex Apdsg -without: drive -Connection: DN40 -Width: 200 mm -Nominal pressure: PN10 -Dimensions: 200/150/H214 mm -Weight: 6.7 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. Lasdpfxswc Ri Ij Apdsg The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: excellent (used), Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.065 -Connection: DN65 Lodpfxjg St Nxj Apdjag -Pmax .: 700 mbar -Dimensions: 285/190 / H210 mm -Weight: 8.3 kg

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2026, Year of construction: 2026, Equipment: ABS, Specification: External Roller 20 AR * Novagrau * 2-axle trailer chassis for containers * External roller version (20AR) * Dimensions and Weights * External reference length approx. 6,896 mm * Overall width approx. 2,500 mm * Ride height loaded approx. 1,175 mm * Roller track length approx. 6,880 mm * Wheelbase 5,100 mm * Unladen weight (complete) approx. 3,860 kg * Technical possible gross weight approx. 20,000 kg * Permissible gross weight approx. 18,000 kg * Payload approx. 14,140 kg * Suitable for containers from 5,000 to 7,000 mm length according to DIN 30722 * Chassis with cross members, welded box-section main beams * Made from QSTE steel * 4 container locks, pneumatically operated * Side underrun protection closed according to RL 89/297/EEC * Pivot mounting * Pivot mounting 980 FM incl. ball race ring 90/1100/22 (low maintenance) * Drawbar * Drawbar 2600/980/100/30, towing eye inclined * With height adjustment (tension spring with turnbuckle) * Drawbar with DIN towing eye, internal Ø=40mm, external Ø=110mm, thickness 30mm * Axles * 2 x 10 t axles for 19.5 disc brakes, brand according to manufacturer selection * Brake disc diameter approx. 370mm * Wheel attachment by central centering as per DIN 74 361 part 3 * Brake System * Pneumatic brake system according to EU guideline with Duomatic coupling head * Conventional air suspension * EBS Type 4S/3M, Electronic Braking System with ROLL Stability * Double diaphragm spring-actuated cylinders on rear axle * Release valve for individual release of spring parking brake * Lighting System * 24 Volt full LED lighting system to RL 76/756/EEC with multi-chamber tail light and license plate light integrated in lamp bracket * 1 x 15-pin socket * 6 LED side marker-reflector lights with flash function Ljdpeyv Ttpjfx Apdoag * 2 LED white position lights at the front * 2 separate LED lane marker lights at the rear * 1 additional reversing lamp * Regional haulage tires, brand as per manufacturer selection * 8 x 265/70R19.5 (7.5x19.5) * Steel wheels ET 138 * Wheel nuts unpainted * Including tire pressure monitoring system * Rear underrun protection made from aluminium * Two vertical Delta anti-collision profiles to protect the rear when loading/unloading * Accessories * 4 plastic fenders (half-shell) front and rear, single wheel fenders * 4 anti-spray mudflaps, neutral * 1 lockable plastic toolbox * 1 wheel chock with holder * 1 A-sign for waste transport * 1 hanging net box * Chassis color: MB7350 Novagrau * Wheel hub color: black KTL * Rim color: RAL 9006 Silver * Rear contour markings: red * Side contour markings: white * Closed SSE: RAL7001 silver grey * Rear panel/light plates: RAL7001 silver grey * Underrun protection: aluminium anodized (silver) All information subject to change. Errors and prior sale excepted.

Condition: ready for operation (used), A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554. Only package sale is possible. Documentation available. On-site inspection is possible. Lodpeycig Dofx Apdjag

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT22001014750, empty load weight: 3,560 kg, maximum load weight: 16,440 kg, overall weight: 20,000 kg, axle configuration: 2 axles, total length: 9,770 mm, total width: 2,550 mm, suspension: air, tire size: 265/70 R19,5", tire condition: 100 %, color: grey-black, Year of construction: 2026, - Roll-off container trailer - Attention: archive images! #Turntable chassis, waste management version - Fine-grain steel welded construction - 2 longitudinal members with cross members, top of longitudinal members designed as wear-resistant container roller track, loadable from the rear, with lead-in ramp. For roll-off containers with external rollers of 5.5/ 6.0/ 6.5/ 7.0 m (for transporting roll-off containers to DIN 30722), plug-in stops: 1 x front, 1 x 250 mm before the first stop, 1 x 750 mm, 1 x 1150 mm, 1 x 1400 mm, each measured to the stop of the roller/container, front lowering at least 1500 mm long - Container locking: - 2 pairs of locking hooks recessed in the floor - pneumatic actuation - hold-down locking with a clamping force of 4 t per claw - Turntable with heavy-duty ball-bearing slewing ring - Wheel chocks with holder - Aluminium side underrun protection, folding up on the right in direction of travel - Rear underrun protection, galvanised steel - Fliegl mud flap at rear across full width - Half-shell mudguards - Anti-spray mud flaps on last axle only - 1 document box, at front on the turntable bogie - 1 aluminium storage box with stainless steel lid, w=600/h=400/d=500 mm, lockable, on the right in direction of travel #Towing equipment, turntable trailer - Drawbar with certified 40 mm drawbar eye - Drawbar mechanically length-adjustable by 6 x 100 mm and lockable - Parking sockets for electrics/ABS and air connections on drawbar - Drawbar height adjustment via spring #Axles + suspension - BPW disc brake axles with 370 mm disc diameter - Front container stop at very front to centre of 1st axle approx. 1250 mm - Axle spacing approx. 4840 mm, centre of last axle to end approx. 910 mm - "Laser-aligned axles/running gear": reduced tyre wear and fuel consumption - Air suspension with raise & lower valve, + auto-reset function, front and rear separately operable - Controls at front left in direction of travel, at drawbar #Wheels and tyres - 8x 265/70 R 19.5" - at manufacturer's choice - 8x steel rims in twin configuration, factory silver - Wabco tyre pressure monitoring system, display in towing vehicle via EBS, to ECE R 141 #Braking system - 2-line compressed-air braking system - Double release button on bracket, approx. centre of trailer, left in direction of travel - Spring-brake parking brake - Immobiliser - Vehicle stability system - Duomatic connection at front - 24 V EBS, electronic braking system with EBS connector at front - Make: Wabco - Wabco SmartBoard, mileage and diagnostic/system messages Lajdoz Eanmopfx Apdog #Electrics - 12 to 24 V, LED multi-chamber lamps Aspöck Eco LED II, flashing side marker lamps, LED number plate lighting - 2 white LED front position lamps - 2 white/red LED outline marker lights at rear - 1 x 15-pin socket at front, all 15 pins fully wired through to the rear - LED work lights on the side, front left and front right in direction of travel on side underrun protection, switched via switch in the truck cab - 2 additional LED work lights at rear #Paintwork - Frame DB 7350 Novagrau - "10-year warranty against rust-through" - Attention: archive images!

Condition: used, mileage: 1,800 km, first registration: 04/2020, overall weight: 9,000 kg, axle configuration: 2 axles, These front-mounted sweepers can be operated via the front PTO shaft. Of course, we can also accommodate your specific requirements, special requests, and additional optional equipment. The brush rollers are equipped with alternating plastic and wire brush discs as standard to achieve the best possible sweeping result, even with heavy and stubborn dirt. * Dücker FKM 2400 * with municipal mounting plate receiver * Device plate size 3 and 5 * Very little use and always stored in a hall * Working width 0°. 2,400 mm * Working width 15° 2,300 mm * Working width 30° 2,075 mm * Sweeper roller diameter: 600 mm * Hydraulically raise/lower * Hydraulically swivel right/left * 2x water tank * Water spray system * Support wheels * Support Made from a sturdy, torsion-resistant housing with double-walled construction. The sweeper roller is suspended and can be adjusted in height, with stepless control, and consists of disc brushes in plastic-wire, 600 mm diameter, and heavy-duty wheels, 250 mm diameter, directly attached to the housing. Working width: 2.4 m Overall width: 2.65 m Laodpfx Aoziudmjpdeg Sweeper roller diameter: 600 mm Lifting device for front quick-change system: Device plate size 3 or 5, including cylinder Hydraulic drive, minimum oil flow at 180 bar: 40 l/min Weight: 580 kg Additionally equipped with: Hydraulic tilting of the brush to the right/left Water spray device in front of the sweeper brush Boundary lights LED and warning flags Switching valve, electric Financing is possible through our partner banks; we are happy to assist you. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is provided without guarantee. Subject to change, prior sale, or errors. We strongly recommend and offer an inspection and examination so that no false impressions arise in the buyer regarding the condition and suitability. Inspections and examinations are possible at any time by prior arrangement and are expressly desired.

Condition: used, Year of construction: 2024, _____WTS-1200 Wet Salt Equipment Standard Equipment: Stainless steel folding cover, spreading container with brackets and drive, grating, removable parking stand, mounting bracket for category 2 and 3, fully hydraulic drive of the feed auger and spreading disc shaft, specially coated spreading container, stainless steel sliding plate, stainless steel spreading disc, stainless steel spreading disc device, equipment safety cover, protective cover for the hydraulic valves and electrical distribution, hydraulic block with anti-reverse protection, pressure oil filter, electronic spread pattern adjustment, LED lighting, color RAL 2011, Win-Icom road-dependent control system, stainless steel agitator shaft. Additional Equipment (for an extra charge): Work lights, wet salt system, 500L front tank made of plastic, rubber apron, winter service marking. Price from €23,450 (net). The photo is an example and may include special equipment. Storage location: null Ledou Ebk Hspfx Apdjag

Condition: used, Used stainless steel rolling container Article number: 10872 Last known use: unknown Volume: 515 liters Type: Standing on rollers Material (in contact with media): 1.4404 / AISI 316 Manhole: 440mm Design: Single-walled Operating pressure according to nameplate: ATM Container dimensions: Outer diameter: 1000mm Overall width: 1220mm Overall height: 1730mm Laedoy Uh Huepfx Apdeg Cylindrical height: 500mm Distance from outlet to bottom: 630mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4301 / AISI 304 Equipment: Nameplate: no Outlet diameter: 50mm Outlet valve: disc valve Height of feet: 1090mm

Condition: new, Factory-new electrically heated stainless steel mixing tank, insulated, with propeller agitator, including operating manual and CE declaration of conformity. Model: EBB150RWP Also available with alternative agitator types and in other sizes. Capacity: 152 L Approximate dimensions: Ø 660 mm x cylindrical height 625 mm Total height: 910 mm (+ agitator motor) Material: 1.4301 (V2A) stainless steel Finish: IIIc / 2B Weld seams ground Maximum operating temperature: 110°C Operating pressure (tank): atmospheric -Upright design on castors -Top: Hinged lid, half bolted, half hinged, with removable stainless steel safety grid -Bottom: Flat bottom with lateral outlet DN50 DIN 11851 and disc valve, EPDM gasket -Agitator flange connection on top Lasdsym Uclopfx Apdeg -2x push handles -1x type plate Agitator: Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3-phase 400 V

Condition: new, Factory-new electrically heated stainless steel agitator tank EBB90RWP Including operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in other sizes. Volume: 97L Dimensions approx.: Ø 540mm x cylindrical height 625mm Total height: 910mm (+ agitator motor) Material: 1.4301 stainless steel (V2A) Surface: inside and outside finely ground (matte finish) Weld seams ground smooth Max. operating temperature: 110°C Operating pressure (tank): Atm - Upright design on castors - Top: folding lid, half bolted, half hinged, with removable stainless steel grating for reach-in protection Lasdpfx Asym Arbjpdog - Bottom: flat base with lateral outlet DN50 DIN11851 and disc valve - Agitator flange on the top cover - 2x push handles - 1x nameplate Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3PH 400V

Year of construction: 1979, condition: good (used), 1 x 90 m³ aluminum silo with extended base and filter housing, ø 3,000 mm designed for a specific weight of 0.6 kg/dm³ (formerly used as a flour and starch silo) Manufacturer: Zeppelin Capacity: approx. 90,000 liters Diameter: approx. 3,000 mm Overall height: approx. 15,950 mm + 1,200 mm railing Weight: approx. 4,000 kg Specific weight: 0.6 kg/dm³ Material: Aluminum: AlMg3 Food grade: yes Insulation: approx. 100 mm mineral wool with screwed-on cover plate (cover plate partially damaged, but can be repaired by us). Connections and fittings: On the top: 1 x roof edge railing (ø 1,800 x 1,200 mm) with two access openings 1 x hinged dome with protective grid DN 600 1 x access ladder to the filter housing 2 x crane eyes In the filter housing: 1 x flange DN 100 for filling line 4 x ventilation opening DN 600 with filter bag 3 x connection for control/measuring technology In the shell: 1 x ventilation grid (filter housing) 1 x filling line 1 x access door (approx. 1,850 x 800 mm) Ledpsgig D Dsfx Apdoag The silo ends in a 60° cone NW 1500 with a manhole. The cone is equipped with a fluidized bed (compressed air) and a rotary valve. The silo does not have rupture discs or explosion protection devices. For further information: see technical drawing and images.

Condition: used, functionality: fully functional, Aluminum flour/sugar silo with a tall support ring (used), designed for a bulk density of 0.95 kg/dm³ Volume: 70,000 liters Available quantity: 1 Diameter: approx. 2,400 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 19,200 mm (including roof edge railing) Material: AlMg3 Bulk density: 1.0 kg/dm³ Equipment and connections: In the upper section: 1 x access opening DN 600 with cover 1 x over/underpressure valve 1 x top-mounted ventilation filter (ø 1000 x 5 mm) 1 x flange DN 125 for filling pipe 1 x flange DN 50 for pressure transmitter 1 x roof edge railing with handrail 2 x crane eyelets On the shell: 1 x access door 850 x 1800 mm 8 x pipe support ø 108 mm for filling pipe 1 x filling pipe DN 100, ending in a TW connection at the bottom 1 x cable protection conduit DN 50 1 x block flange for level indicator 1 x rupture disc Various pipe penetrations in the area of the lower support ring The silo has a 40° cone at the bottom, which ends in a flange DN 1500 for mounting a vibratory base. At the bottom/cone: 1 x vibratory base VB 1400 with motor, manufacturer AZO 1 x block flange for empty level indicator The currently connected measuring and control technology is included in the above offer. However, no guarantee is given for its function! Please note that the connections and equipment of the four silos may differ slightly. Ljdpfx Apeyhzm Redeag Otherwise, as per the images and drawings.

Year of construction: 1979, condition: used, Westfalia Separator, last used in a fruit juice plant. The separator's control system was modernized by GEA. The product is clarified in the centrifuge bowls and conveyed further under pressure. Solids collect in the solids chamber and are periodically discharged automatically. During CIP cleaning, the cleaning fluid is pumped in a circuit. Additional title: Disc centrifuge Intake capacity: 22000 l/h flow rate for fruit juice approx. 4,000 l/h Drum velocity: 6500 rpm Lodpfxjyr Ic Nj Apdsag Density liquid phase: 1 kg/dm3 Density solid phase: 1.4 kg/dm3 Power: 18.5 kW Current: 37 A Voltage: 380 V Frequency: 50 Hz Length: 1485 mm Width: 850 mm Height: 1470 mm Weight: 1200 kg Material: Stainless steel surfaces that come into contact with the product Position: on a 685 x 585 mm foundation Features: Drum, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, drain, solids outlet, control water drain, circulation monitor, oil sight glass, brake, control valve, hood flushing, pressure gauge

Condition: excellent (used), functionality: fully functional, tank capacity: 1,20,500 l, total height: 20,000 mm, inner diameter: 3,000 mm, outer diameter: 3,300 mm, wall material: stainless steel, wall structure: single-walled, number of chambers: 1, operating temperature: 20 °C, operating pressure: 3 bar, Stainless steel pressure vessel, vertical, insulated Technical data / Dimensions Available quantity: 8 Volume: approx. 120,000 liters Vessel type: Pressure vessel Condition: used Food-grade: yes Design: vertical Internal diameter: approx. 3,000 mm External diameter: approx. 3,300 mm Overall height: approx. 20,000 mm Specific gravity of the medium: 10.00 t/m³ Operating pressure: Overpressure Operating overpressure: 3.00 bar Wall thickness, bottom: approx. 6.0 mm Wall thickness, top: approx. 4.5 mm Wall thickness, shell / cylinder: approx. 3.5-5 mm Operating temperature: 20°C Material / Properties Material, inner shell: Stainless steel Material grade: V2A-1.4301 (AISI 304) External surface: Ground, welded seams passivated Welded seams, internally ground: Yes Laedpezvh Dtsfx Apdeg Insulation Insulation present Insulation thickness: approx. 120 mm Insulation material: Mineral wool Material, insulation jacket: Aluminum Insulation jacket: Trapezoidal sheet Equipment Base type: Foot ring / base ring Quantity: 1 Mounting: fixed Bottom type, top: Dished end Bottom type, bottom: Dished end Top: 1 x Insulated dome DN 900 1 x Access opening with dome cover DN600 1 x Valve dome cover with the following connections: 1 x Cleaning-ventilation-valve combination (RLV) DN 50 1 x Vacuum valve, spring-loaded with 2 heating elements and thermostat 1 x Safety valve 1 x Burst disc 1 x Thread DN 50 for probe Shell: 1 x Condensate pipe DN 25 1 x Cable protection pipe DN 32 1 x CIP pipe DN 50 1 x Base ring made of Cr-Ni steel (1.4301) with access opening 600 x 600 1 x Spray pipe with protruding ball head Bottom: 1 x Outlet cup DN 300 1 x Outlet with cover cap, chain, and eyelet DN 80 1 x Connection fitting for sampling tap DN10 Documentation Drawing Inspection log Inspection certificate

Condition: excellent (used), Disc valve, flap valve, ball valve, butterfly valve, globe valve, slide valve -Manufacturer: KSB, gate valve shut-off valve type BOA-C JL1040 -Connection: DN65 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 170/160/H330 mm / 170/160/H340 mm Ledpfxed I I Hpj Apdjag -Weight: 7.6 kg/7.7 kg

Condition: refurbished (used), SLITTING LINE INMASA 1100x3 Revamped in 2019 Scope of supply 1. Loading carriage for coil up to 15000 Kg 2. Cantilever Uncoiler with hold down roll 3. Threading group with supporting roll + Pinch roll 4. Crop shear 5. Intermediate table 6. Pinch-roll 7. Circular shear (turning unit with 2 pairs of arms, one in-line + one off line for preparation) 8. Exit roll table 9. Scrap recoiler 10. Accumulator pit + Tiltable cover 11. Tensioning device with Strip guiding arm 12. Recoiler 13. Unloading carriage 14. 2-arms turnstile 15. Switch cabinets & control panels (New in 2019) 16. Pneumatics & Hydraulics 17. Existing tooling SCOPE OF THE WORKS CARRIED OUT DURING THE REVAMPING OF THE LINE MADE BY EUROMAQUINA IN 2019 · Complete disassembly for overhaul and cleaning of each line component · Final paint touch up. · Electrical disassembly of each component. · Checking of the elements for defects. · Overhaul of motors. · Conductivity, brush cleaning in DC motors, etc. were checked. Not repairable motors were replaced. · Mechanical assembly of the line components. · Assembly of components to be replaced due to defective parts. · Revision of hydraulic cylinders with change of seals. Cleaning and painting. · Overhaul hydraulic motors. Cleaning and painting. · Overhaul hydraulic power units. Cleaning and painting. · Overhaul of pneumatic cylinders and electro-valves. · Replacement of defective hydraulic piping and hoses. · Replacement of pneumatic piping. · Change all wiring on board machine. · Replace defective boxes on board the machine or paint them. Coil weight: 15.000 kg Coil outer diameter: 1650 mm Coil inner diameter: 508 / 610 mm Strip thickness: 0.4 – 3 mm Coil width: 150 - 1100 (1060) mm Ultimate tensile strength: 600 N/mm2 Yield strength: 500 N/mm2 Exit coil weight: 15.000 kg Exit coil diameter: 700 – 1550 mm Laodpfx Apsymbpljdog Exit coil inner diameter: 508 mm Exit coil width: 31 – 1100 mm Max. cutting speed: 150 m/min Disc blades diameter (inner-outer): 160 – 300 mm

Condition: used, power: 38 kW (51.67 HP), first registration: 12/2009, fuel type: diesel, gearing type: automatic, Equipment: air conditioning, Version 38 km/h, 2-speed gearshift for better driving performance 38 kW 4-cylinder Perkins 404D 22 38 kW (51 hp) at 3000 rpm. (97/68/EC Stage IIIA) Permanent hydrostatic 4×4 drive 65 liter diesel tank Perm. total weight 3500 kg, therefore vol Air conditioning with heating and ventilation system 2 x front working lights Speed control via accelerator pedal 3-circuit hydraulic system Front hydraulics with quick-change plate Mech. Quick-Shift quick-change system for superstructures for summer and winter service Preparation of hydraulics and electrics for optional equipment variants High-pressure valves (360 bar) - only on BB201D Hydrostatic delay with brake light function (Pressostat) 4 x lashing eyes Quick-change suction mouth König Health seat with integrated 3-point seat belt Heated rear-view mirrors Integrated rear-view camera incl. 7" color screen - infrared night vision, viewing angle approx. 135° suction mouth camera (only in conjunction with reversing camera) Container with cleaning flaps & water level indicator Sweeping unit with 2 trailed front brushes, 900 mm Sweeping width: 1190 mm - 2400 mm Hydraulic coarse dirt flap Infinitely variable brush speed regulation 0-150 rpm Dust reduction through spray nozzles per disc brush Automatic collision protection (for sweeping and picking up) With hydraulic inclination adjustment of the right-hand brush Sweepings container with suction fan Color: Container in stainless steel look High-dump 1600 mm 250 liter fresh water tank 300 liter recycling water Suitable for sweeper and grass extraction Multi-purpose separator screen for efficient dirt and grass separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Quick-change dirt container Baffle plate Lodpfx Aotzt E Hopdsag