Used Kuper Hfz 4 for sale (57,603)

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Bwodpfx Asfdkb Tok Hsl Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Bwsded Tqalopfx Ak Hel - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Bsdpfefdkb Uox Ak Hswl The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Bodpfx Ajguk A Hjk Howl According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Bodpfsfdkbhsx Ak Howl Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Bwedpfx Ajguk Dkok Hsl - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm Bwedpfx Aksguk Dve Hol - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Bwodpfxexgqmxe Ak Hol Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: excellent (used), Electric motor from Kaltenbach Maschinenfabrik for sale Price applies to 1 unit Condition: used, fully functional Motor tested with measuring instrument Normal signs of use and storage visible Technical data Manufacturer: Kaltenbach Maschinenfabrik Bodpfx Akjyv Uvxe Hewl Type: DKV 112M 238 4 Three-phase motor Power: 1.7 / 2.6 kW Voltage: 400 V, 50 Hz Protection class: IP54 Insulation class: F Speed: 700 / 1415 rpm Dahlander multi-speed motor Shaft diameter approx. 28 mm

Condition: used, Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. uper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Bedpfx Aoyyqnlsk Howl Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4 Folding Machine Machine in very good condition, ready for operation. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 Bwedpeyur Izofx Ak Hjl – Mobile delivery Infinitely variable folding speed control via inverter Cassette noise reduction Compressor included Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. Made in Germany.

Condition: excellent (used), Year of construction: 1995, still preserved CNC because little in use was used for door production , but can be used for any purpose . Double table, can be mounted from left and right side 4 axes Bwjdpfjig T Epex Ak Hel x 5000 mm y 1350 mm z 450 mm a 190° main spindle SK 40 8 kw water cooled up to 17 000 rpm chain magazine with 24 places

Condition: excellent (used), Year of construction: 2020, General Description For sale: 6 hydraulic presses, model YL32-200. These are robust four-column presses, ideal for metal forming, pressing, stamping, bending, and general industrial uses. The machines were originally imported from China and are based on the widely used Y32 series, ensuring easy maintenance and worldwide availability of spare parts. ⸻ ⚙️ Technical Specifications (typical for YL32-200) * Press force: approx. 200 tons * Construction: 4-column hydraulic press * Stroke: approx. 400 – 700 mm * Table size: approx. 700 x 700 mm – 1000 x 1000 mm * Daylight (max. opening): approx. 800 – 1200 mm * Hydraulic pressure: up to 25 MPa * Motor power: approx. 7.5 – 15 kW * Control system: manual / semi-automatic * Power supply: 380V / 50Hz (industrial standard) * Weight per machine: approx. 5 – 8 tons ⸻ 🏭 Applications * Metal forming & stamping * Deep drawing * Straightening and pressing * Plastic forming * Workshop and industrial production ⸻ 📦 Condition * Used condition * Sold as is / ex-works * Inspection possible by appointment ⸻ 📊 Availability * Quantity: 6 machines available * Sale as single units or as a package ⸻ 🚛 Logistics * Location: Germany * Loading possible (forklift or crane required depending on configuration) * International shipping can be arranged * Price per unit!! Bwsdpfoy E Abnjx Ak Hsl * Dismantling by buyer!! * Alternatively, dismantling can be organized at an additional cost!

Condition: used, Year of construction: 2001, DDS Dampening Quick Action Clamps Technotrans Cooling Device Straight Machine Bsdpfx Akjyx A S He Hjwl Impression Account: 42 Mio. Print Output Maximum : 8.000 Sheets / Hour Colors : 4 Unit Max. Size : 360 x 520 mm Min. Size : 105 x 180 mm Printing Area Max : 340 x 505 mm Technical data can vary according to job, consumables, printing stock and, possible, other factors

Condition: used, Year of construction: 2020, KUPER FLI 1000 VENEER JOINING MACHINE Joining machine for gluing veneer strips, including a gluing unit with an almost horizontal glue application disc. Ideal in combination with glue cooling. Standing beam width: 1,000 mm Veneer thicknesses: approx. 0.35 – 2.5 mm, optionally from approx. 0.25 mm optionally up to approx. 5.0 mm Veneer lengths: from approx. 300 mm Veneer width: from approx. 35 mm Bjdpfx Akoyzhq Ho Howl Feed speed: infinitely variable from 12 - 55 m/min Operating voltage: 400 V, 50 Hz, 3-phase + N + PE Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar OPTIONAL PACKAGE FOR THICK VENEERS UP TO 5.0 MM THICK Extension of the machine control system to include a selectable operating mode, enabling veneers up to approx. 5 mm thick (depending on the wood species and properties) to be glued and assembled efficiently. The feed speed can be adjusted continuously from 5 to 55 m/min. GLUE COOLING For optimum glue temperature: 12°–14°C. Significantly extends the pot life of the glue. Less glue wastage and more efficient operation.

Condition: used, Year of construction: 2008, Price: On request Four-axis planer Kuper SWT 23 XL-5R Year of construction 2008 min/max Working height 8/150 mm min/max Working width18/230 mm Spindle speed 6000 rpm Spindle diameter 40 mm Motors Spindle - horizontal down 7.5kW  Spindle - vertical right 7.5kW Spindle - vertical left 11kW Spindle - horizontal top 11 kW Dimensions 3100 x1850 x 1750 mm (L x W x H), weight 4000 kg Outfeed table  Bodpownit Ajfx Ak Hjwl Weidner buffer table Type DBT 4500B Dimensions 4500 x1750 x 97 mm (L x W x H) Available from November 2024 - Year: 2008 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Bwodpeg Nn E Nsfx Ak Hsl • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), functionality: fully functional, with heating wire, outreach 920 mm, material 0.4-2 mm, Bsdpfx Akjyayzas Hjwl feed rate approx. 15 m/min, required space 1400 x 600 x 1600 mm, weight approx. 350 kg in good condition Price ex works Transport possible at extra cost!

Condition: good (used), Code: 0240 Brand: KUPER Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 900 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300 Bwodeyxmrwjpfx Ak Hjl

Condition: excellent (used), 1.6 kW motor, 2,300 m³/h, 16 cm inlet Bwsdpfjy Aagcsx Ak Hel

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Bedpfjtp I S Ajx Ak Hjwl

Condition: ready for operation (used), Kuper FWJ900 With glue thread, well-maintained condition Max. veneer thickness 2 mm, min. 0.4 mm Control via foot pedal Stand model, feed speed 7 mm, Projection 900 mm, weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm Bwsdpovrk Siefx Ak Hol

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. Bwjdswg R I Eepfx Ak Hel //// PRICE SHOWN IS PER PIECE ////

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,150 kg, load capacity per storage section: 3,050 kg, total length: 22,800 mm, total height: 3,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 22,800 mm, 4 double-bay pallet racks (M35112711-3) Each 5.7 m long, 3.5 m high, 1.1 m deep, Each with 2 bays, 2.7 m wide, Each with 3 beam levels, shelf load capacity 3000 kg. - 12 frames (RM3511 - RAL5019) - 24 base plates, shim material, fastening material - 48 floor anchors (ZZBA1210) - 48 single beams (T2711 - RAL2008) - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 20 working days after receipt of payment - Delivered free to site/installation location - Unloading from the truck to be carried out by the buyer using their own lifting equipment Bwedpjyz Iccofx Ak Hsl - Deliveries available throughout the Federal Republic of Germany (except islands); deliveries to EU countries upon individual agreement.

Condition: used, Model: D Serial No: 20829 Capacities: Maximum Swing Over Bed: 508mm Maximum Distance Between Centres: 4572mm Wheel Dimensions: 660x 75mm Work Head Speeds: (8) 22 – 129rpm Wheel Head Speeds: 735rpm Electrics: 415v, 3ph, 50 Cycles Motors Bjdpfeyx Hw Tjx Ak Howl Wheel Head: 20 HP 960rpm Work Head: 4HP 1440rpm Table Motor: 3HP 950rpm Complete With: 4 No 2 Point Open Steadies Complete 3 No 2 Point Steadies Incomplete Table Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 13,000 x 2500 x 1800mm Approximate Weight: 19,000kg