Used Lorenz Ls 150 for sale (12,639)

Condition: ready for operation (used), Bosch VM 60-150 supply module SN:276949 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Kedpfx Afsqp Aihs Hodt

Condition: refurbished (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Kedjn R Dihjpfx Af Hedt Composition - LOADER - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Press platen dimensions 3000x1300 mm. Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t.

Condition: used, functionality: fully functional, Year of construction: 2014, USED 150T HYDRAULIC PRESS BRAKE, SAHMATO AP1520-150. Kedpfx Afozh Em As Hedt

Condition: ready for operation (used), Bosch VM 60-150 supply module SN:287019, used, normal signs of wear, 100% functional, delivery as shown in the photos. Ksdex Eqzvepfx Af Hedt

Condition: used, Year of construction: 2001, sheet width 1650 mm plate thickness 0,5- 3 mm number of rolls 21 straightening feed 0- 60 m/min straightening roll diameter 50 mm adjustment 30 mm Kedpfozafi Nsx Af Hedt weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm number of support rolls 18 main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Main Gearbox was renewed in 2021.

Year of construction: 2021, condition: ready for operation (used), An automatic Lorenz filter test station for the automatic testing of filter media, half masks, canister filters, and medical face masks is available. Standards: EN143/EN149/EN14683/ISO16900-3 and more, module components: flow meter/photometer upstream and downstream of the test specimen/aerosol generator/suction and extraction unit, aerosols: paraffin oil/Emery oil/DOP/DEHS, volume flow range: 8L-300L/min, min. separation efficiency measuring range: 0.0001%, min. breathing resistance measuring range: 5Pa-1000Pa, max. filter air velocity: 10.2cm/s, max. test area: 237.8cm³. The device has been used little and would not need to be serviced. Documentation available. An on-site inspection is possible. The image is an example. Kdedpfx Ajy Tx Slef Hot

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine Kdedpozx Ergefx Af Hst ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Condition: defective spare-parts repository (used), functionality: not functional, Year of construction: 1980, operating hours: 2,233 h, fuel type: diesel, power: 39 kW (53.03 HP), motor manufacturer: Peugeot, gearing type: automatic, empty load weight: 2,590 kg, color: red, Equipment: cabin, trailer coupling, Tractor: + Tracma + Model: 1500D B Kdjdpfx Afeyuyqwo Het + Year of manufacture: 04/1980 + 2,233 operating hours + Safety roof + Rear tow hitch + Front push bar + Weight: 2,590 kg + 4-cylinder Peugeot Indenor diesel engine + Missing parts / for spare parts Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, interim sale reserved!

Condition: used, Year of construction: 1996, operating hours: 48,257 h, functionality: fully functional, machine/vehicle number: 299, Equipment: documentation/manual, Mori Seiki SL150 & Iemca short bar feeder. The machine is fully functional. 12-Station Turret with Tool Holders MSC-518 (Fanuc ) CNC Control 8″ Hydraulic Chuck 2 Step gear spindle for powerful torque Hydraulic Tailstock with Power Quill Chip Conveyor Coolant System. Ksdpozg A Sajfx Af Hsdt Automatic Lubrication system Parts catcher

Condition: used, max. wheel diameter 500 mm gear width 75 mm max. module 5 min. module 0,5 no. of strokes 45 - 424 Hub/min total power requirement 6 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 2,0 x 1,4 x 2,3 m Rapid traverse in the table. Change gears, toolholders, manuals. Ksdszw N E Ujpfx Af Hodt

Condition: used, Technical data: - Manufacturer Leif & Lorenz - Working width max. 1,200 mm - Brush diameter *160 mm - Suction connection D100 mm - Year of manufacture 2005 - Motor power 0.37 kW - Location, in stock in Blomberg - Also available for assembly with roller or belt conveyor Kdodpszf N Eksfx Af Hst

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00670, load capacity: 150 kg, arm reach: 2,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Never-used ABB IRB 6620-150/2.2 manufactured in 2014.02. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6620-150/2.2 Model Number: IRB Year of Manufacture Robot: 2014.02 Kdedpfxjz Af R Rj Af Het Warranty term (months): 12   Payload (kg): 150 Reach (mm): 2200 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 880   Controller: IRC5 Year of Manufacture Cabinet: 2014.02 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00676, load capacity: 150 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, ABB IRB 6700-150/3.20 manufactured in 2016.05. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6700-150/3.20 Model Number: IRB Kedpfx Afsz Af Rdo Hsdt Year of Manufacture Robot: 2016.05 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 3200 Repeatability (mm): ±0.06 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1280   Controller: IRC5 Year of Manufacture Cabinet: 2016.05 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: like new (used), Year of construction: 2021, Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Width of bending jaws: 10 mm + 10 mm additional bar Maximum bending capacity: S = 20 mm, 1.50 mm steel sheet (Re 275 N/mm²) Capacity for 180° bending: 50% of the maximum bending capacity Kedozzxb Hopfx Af Hedt Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Bending accuracy: +/- 0.5° (using crowning) Number of clamps / clamp stroke: 7 units / 15 mm - 1250 mm Maximum clamp opening: 35 mm Conical backgauge with adjustable depth: multi-zone function Number of backgauge fingers / stroke: 7 units / 5 mm - 1150 mm Backgauge tolerance range: +/- 0.1 mm per repeatability set Electrical voltage: 400 V / 50 Hz / 3 phases + PE Rated current / protection / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T (MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and protective enclosure / Machine in excellent technical condition Year of manufacture: 2017 Injection Unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1984 bar Dosage volume: 226 ccm Clamping Unit: Clamping force: 150 t Tie bar spacing: 510x510 mm Platen dimensions: 740x740 mm Ejector: hydraulic Clamping system: toggle lever Control system: B&R touchscreen Additional equipment: Hybrid machine: high-speed, energy-efficient and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control unit x 36 (available at extra cost) Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor driven by inverter Central lubrication Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Wemo 6-5 xDesign Robot Year of manufacture: 2017 4-axis robot: 3 axes driven by servo motors (electric) Safety package for robot Robot with adapter, Wemo WCS-R conveyor belt and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10x1.97x2.60 m Drive: Pump/Motor: 11.5 kW Kdedpfx Ajzy Iiqsf Hot Heating power: 11.3 kW Total power: 22.8 kW All machines offered are commissioned by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to take part in live technical tests at our company in Łódź. Price: 25,000.00 EUR

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Kdjdpfsmpfwdsx Af Hjt Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: used, Year of construction: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Kdodpfx Afjzy Ilfj Hjt Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Injection pressure: 1,714 bar Shot volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x470 mm Dimensions of platens: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor - servo motor driven by inverter - energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 1998, Extendable spiral mixer Kemper SP 150 A SPS Kodez A Sllopfx Af Hsdt Condition: used, overhauled 5 years ago Capacity for dough: 240 kg Capacity for flour: 150 kg Timer control Two speed levels PLC control with programs Friction wheel drive Mechanical bowl locking mechanism Includes 2 dough trough carts

Condition: good (used), Year of construction: 2010, operating hours: 72,154 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, total length: 3,800 mm, total width: 1,850 mm, total height: 2,150 mm, overall weight: 5,000 kg, Equipment: documentation/manual, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Ksdpfoz Azdtex Af Hjdt Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: ready for operation (used), Year of construction: 2008, 1,0 piece injection molding machine with robot Manufacturer: DEMAG Type: IntElect 150/520-410 Year of manufacture: 2008 Clamping force: 150 tons Tie bar spacing: 520 x 520 mm Screw diameter: 35 mm Injection volume: 166 cm³ Shot weight: 146 g/shot Equipment: Ksdpfx Afsz Dibms Hodt Part removal robot, manufacturer: Wittmann, type: W721, year of manufacture: 2006 Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x core pull Safety fence

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00598, load capacity: 150 kg, arm reach: 2,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Never-used ABB IRB 6620-150/2.2 manufactured in 2014.02. The robot comes with an IRC5 controller including Flexpendant DSQC679. Kjdpjzxwquofx Af Hsdt   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6620-150/2.2 Model Number: IRB Year of Manufacture Robot: 2014.02 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 2200 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 880   Controller: IRC5 Year of Manufacture Cabinet: 2014.02 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00669, load capacity: 150 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, ABB IRB 6700-150/3.20 manufactured in 2014.07. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6700-150/3.20 Model Number: IRB Year of Manufacture Robot: 2014.07 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 3200 Repeatability (mm): ±0.06 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1280   Controller: IRC5 Year of Manufacture Cabinet: 2014.09 RCC Length (m): 14 Ksdpszxb Rlefx Af Hedt   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: excellent (used), Year of construction: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2015 Injection Unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2743 bar Dosage volume: 193 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection moulding machine with rotary table Hybrid machine: high-speed, energy-saving, and very quiet Air valve x 5 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1500 mm Rotary table driven by a servomotor, controlled by an inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m Kdodpfx Aszy Ikzsf Hjt All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades Kedpfx Aszulwzof Hedt - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: excellent (used), functionality: fully functional, Used Maguire plastic drying units are for sale. This listing includes a total of 13 units, with the option to purchase individual units or a larger package. Available are Low Pressure Dryer and Vacuum Batch Dryer / vertical dryer models. Condition as shown in the photos. Price depends on the selected unit and quantity. These dryers are designed for drying plastic granules. The units are used, and their technical and visual condition corresponds to the photos. Additional photos of a specific dryer can be provided upon request. Available units: No. Designation Type / model as shown in the photos 1 D067 Maguire Low Pressure Dryer, model LPD2HE4 Kdjdpfx Afjzc D Ebe Hjt 2 D049 Maguire Low Pressure Dryer, model LPD1HE4 3 D084 Maguire Low Pressure Dryer 4 D099 Maguire Low Pressure Dryer, model LPD1HE4 5 D054 Maguire Low Pressure Dryer, model LPD1HE4 6 D051 Maguire Low Pressure Dryer, model LPD1HE4 7 D065 Maguire Low Pressure Dryer, model LPD1HE4 8 D071 Maguire Low Pressure Dryer, model LPD1HE4 9 D068 Maguire Low Pressure Dryer, model LPD2HE4 10 D076 Maguire Vacuum Batch Dryer, model VBD-150 11 D081 Maguire Vacuum Batch Dryer, model VB-150 12 D089 Maguire Vacuum Batch Dryer, model VB-150 13 D091 Maguire Vacuum Batch Dryer, model VB-150