Used Müller-Weingarten Caz 100 5.1. for sale (25,659)

Condition: used, Single-column eccentric press MÜLLER GEFREES Type 60 SV DK (identical to ExP60) Very little used eccentric press in original condition Machine no. 5250686 Year of manufacture 1986, like new condition Pressing force 60 tons Stroke 280 mm Table area 740 x 560 mm Ram area 385 x 200 mm Die opening in the table 300 x 200 mm Table area, table insert plate 740 x 560 mm Die opening in table insert plate Ø 103 mm Thickness of table insert plate 70 mm Dowel hole 40 mm Table height above floor 815 mm (with table insert plate) Installation height max. 275 (with table insert plate) Installation height max. 345 (without table insert plate) Stroke adjustment 10-90 mm Nljdpfei A A Tbsx Ab Ujg Ram adjustment 60 mm Stroke rate 100 strokes/min Motor power 3 kW Drive power 380 Volt, 50 Hz - mechanical eccentric coupling with pneumatic control - spring-loaded brake controlled via cam - stroke release via pneumatic foot switch - overload protection with shear plate in the ram - table height adjustment via 2 threaded spindles - manual central lubrication system BEKA - operating manual and pneumatic diagram available Space requirement L x W x H 1400 x 1100 x 2200 mm Weight 3.4 tons very good condition, like new

Condition: ready for operation (used), * Brand: Muller * Type: jaw crusher * Feed Opening: 500 x 300 mm Nsdpfsz Ezgksx Ab Uslg * Incl.: 22 kW E-motor

Condition: used, functionality: fully functional, Muller Martini Pony 246 Number of binding clamps: 5 Maximum production speed: Up to 3,000 cycles per hour Typical production speed: Approximately 1,500–2,500 books per hour Maximum book thickness: Up to approximately 40 mm Minimum book thickness: Approximately 3 mm Binding method: Hot-melt adhesive perfect binding Book Format: Maximum book size: Approximately 400 × 240 mm Minimum book size: Approximately 140 × 100 mm Spine preparation: Milling and roughening station Features and Equipment: Njdsz Dh I Eopfx Ab Ujlg 5 binding clamps Automatic cover feeder Hot-melt spine gluing system Hot-melt side gluing system Milling and spine roughening unit Cover scoring/creasing station Book delivery conveyor Waste removal and dust extraction system (configuration dependent) Glue system: Hot-melt adhesive.

Condition: excellent (used), Rotating chuck Diameter: 100 mm Length: 380 mm Width: 160 mm Thickness: 32 mm Weight: 4 kg Other sizes available upon request. Nsdpfx Ajln Ukcjb Uelg

Condition: excellent (used), Catalogue number: 7545 Nljdpfxsztad Tj Ab Uog TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: used, empty load weight: 3,510 kg, maximum load weight: 10,890 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 08/2016, next inspection (TÜV): 01/2027, loading space length: 5,000 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55R19,5 156J, color: other, gearing type: other, front tire size: 385/55R19,5 156J, rear tire size: 385/55R19,5 156J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Wide tires, combination ramp/tailgate, lashing eyes. Additional cost for ramps: €800. Subject to printing errors, errors and changes. Sample images. More details: ! Nledpsz Azkgsfx Ab Usg

Condition: repair required (used), Year of construction: 1972, Manufacturer WEINGARTEN Model VK.1250.46.76 Condition Used Warehouse number cod.323 Structure Double upright Used press Thrust: 1,250 ton. Thrust points n°4 Plunger kinematics Slide stroke 762 mm. VERTICAL LIGHT from the mold holder, CBRA 1,530 mm. Slide - registration 610 mm. Mold holder surface size 4,460 x 2,400 mm. Extractable carriage n°2 lateral exit (possible mold of 5,000 mm) Mold holder surface height 400 mm. Number of strokes/min 8/18 Front useful passage 4,400 mm. Nodpfjvm Eifex Ab Uslg Sheet metal passage in the upright 2,400 mm. Hydraulic safety Present

Condition: excellent (used), Year of construction: 2017, operating hours: 14,000 h, Ref:11152 . 2018 Muller Martini Presto II Latest model short makeready stitcher - Only 14,000 hours worked! Equipped with: 9 station track and chain 6 × 1551 twin feeders + 2 x hand feed 1528 cover folder feeder Presto II 1550 stitching unit with central operator control Nlodpfxez Ek Iws Ab Ueg 2 x HK75Q stitching heads 1565 three-knife trimmer 1564 shingle delivery Specification: Max. untrimmed product: 365 × 305 mm Min. untrimmed product: 105 × 115 mm Max. trimmed product: 360 × 300 mm Min. trimmed product: 140 × 76 mm Max product thickness: 10 mm Max speed: 9,000 cycles/hour

Condition: used, Year of construction: 2001, Fully automatic bandsaw Müller HBA 260 CNC (Dais + Partner) with minimal feed system and roller conveyor. Njdpoz Afgfsfx Ab Uslg

Condition: used, Saddle Stitcher Müller Martini Bravo Plus Amrys Sammelhefter / Saddle Stitcher Müller Martini Bravo Plus Amrys Year 2007 - SN. MMZO 1 306 445 – Working hours 7.100Std./h PLC Steuerung mit Display - Geschwindigkeit max. 14.000 cyc./h. Size (untrimmed) max. 320 x 480mm - (trimmed) min. 105 x 148mm - Product thickness max. 5mm 6 Feeder Type 0370.0458 - SN. MMZO 1 306 445 Umschlaganleger / Cover Feeder Type 1529.0416 - SN. NN35997/ZO1306447 Doppelbogen/Dickenkontrolle / Semko Thickness Control Type 0333.0435 Heftstation / Stitching unit Bravo Plus Typ 0380.0450 - SN. MMZO 1 306 445 Nljdpfx Abezzymwo Ujg Dreischneider / Three Knife Trimmer 0449.0435 - SN. MMZ0 1 306 445 Bandauslage / Band Delivery Müller Martini 1564.0400 Manuals all included Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2016, condition: used, Sewing machine Muller Martini Ventura MC 200 (A371.1000) Year: 2016 Cycles: 1,5 mio (stitches) Description: - Commander with touchscreen Njdpfx Asz Atcujb Uslg - Automatic setting - Feeder - ASIR Automatic Signature Image Recognition: ASIR III - 4 + 4 opening possibilities - Book stacker - PIAB Max. mechanical speed: up to 200 cycles/min Maximum size range: 510 x 320 mm Minimum size range: 120 x 75 mm Number of stitches: 13 Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Year of construction: 2001, Built in: 2001 Size: max 365 x 305 mm; min 105 x 115 mm product thickness: max 15 mm; min 6 mm Speed: max 9.000 c/h; min 2.000 c/h Equipment gathering chain & feeder • 3 double feeders 1551 • 1 cover folder feeder 1528 stitching unit • stitching unit 1550 Nledoz Ey Dzepfx Ab Ujg • 1 stitching heads HK 45 • 1 stitching heads HK 75 • 1 stitching heads 249 (loop stitching) three knife trimmer • three knife trimmer 1522 • shingle conveyor delivery 1511 • compressor Rietschle KTA 80/1 (2000)

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: MMFE 422132/35, Müller Martini 3631 CB-16, manufactured in 2001, compensating collator and stacker designed for the automatic stacking of bound books and printed materials. Maximum size: 450 x 340 mm (varies by model version, up to 470 x 320 mm) Minimum size: 140 x 100 mm Product thickness: 3–70 mm Maximum speed: Up to 18,000 pieces per hour Nledpfx Abjz Dftfj Usg The machine is currently in production. The CPU battery needs to be replaced. After purchase, the machine will be dismantled and prepared for delivery. Please do not hesitate to contact us for more information.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 133365 40, Maximum size: 510 x 310 mm (or 510 x 310 x 60 mm) Minimum size: 140 x 100 mm (or minimum trimmed width of 70 mm) Book/book block thickness: Max. 60 mm, min. 3 mm Production speed: Max. 12,000 cycles per hour Cover size: Max. 642 mm, min. 203 mm Njdpfxoz Dfnie Ab Uslg Equipment: Touchscreen control panel, motorized size adjustment, cutting cassettes, and central lubrication Well-maintained machine currently in production. Prior to sale, the machine will be dismantled and prepared for delivery. Please do not hesitate to contact us for more information.

Condition: new, Müller Co-Ax 5-PCS-2 10 NC valve with external 24V DC actuator, unused, 100% functional, scope of delivery as shown in the photos. Nedpfx Aei Eb Taeb Uelg

Condition: new, Müller co-ax 5-PCS-2 15 NC valve with external drive, 24V DC, unused, 100% functional, scope of delivery as shown in the photos. Nsdpfxsi Eb Tds Ab Uolg

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Hub 250 mm Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm seitlicher Staenderdurchgang 700 mm Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Antriebsleistung 56 kW Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Nsdpox Ug Djfx Ab Uelg Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank

Condition: excellent (used), Year of construction: 1997, Offer includes: Müller Martini Prima, 7 feeder stations + transfer feeder, three-knife trimmer, cross cutter, central air supply system. Clean, well-maintained machine. Year of manufacture: 1997. Nlsdozcfxiepfx Ab Uog

Condition: excellent (used), Offer consisting of: Equipment Collating machine * Müller Martini ZTM 1571 with ASIR * 14 stations * Year of construction 2001 * 1 manual station * Outfeed gate 1572 (year of construction 2005) * 1 positioning element Perfect binder Acoro A5 * Milling and spine processing station * Hotmelt spine gluing unit with an 80-liter pre-melter * Hotmelt side gluing unit with an 18-liter pre-melter * Drum transfer feeder * Pressing station * Lay-down device * Drying section approx. 30 m Three-knife trimmer Müller Martini Merit-S * Year of construction 1998 * Infeed on the right * Pressing ram * Cutting cassettes No. 1–21 * 2 sets of knives Cross cutter CB-16 * Year of construction 1997 * Mobile base machine * Infeed belt with top belts * Turret for stack heights up to 240 mm * Pneumatic slide opening * Retractable ejector Additional equipment * Nordson PUR pre-melter (year of construction 2001) * PUR spine gluing unit * Special spine processing “Fibre Rougher” (new part) * Additional sets of knives for the three-knife trimmer Notes * Compressed air supply (6 bar), compressed air, vacuum and chip extraction required on site. * Inspection possible at any time by appointment. * Assistance with loading can be arranged. Nledpfxozivbaj Ab Usg

Condition: like new (used), Year of construction: 2005, functionality: fully functional, Müller Martini Corona, (~2005), complete clamping unit, for a machine with a maximum speed of 18,000 units/hour. - Part numbers: 3010 1011 9 and 3010 1013.9 Nodpfx Aez Au I Eob Uolg The entire clamping unit is available for sale as a spare part.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Nljdpfxjz Epr Ij Ab Uog Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, pre-assembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x locking pins. - 288 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 19.900 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: excellent (used), functionality: fully functional, clear span: 2,700 mm, total height: 10,050 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 10,000 kg, number of shelf rows: 5, overall weight: 14,500 kg, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty racking solution for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load capacity of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The pallet racking system on offer has a total of 648 pallet spaces, including spaces on the floor level. At a total price of €14,240.00 net, this corresponds to a price of only €21.97 net per pallet space. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Level load: 2,000 kg per level - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: Floor + 5 beam levels - Pallet spaces: 648 including floor spaces - Price per pallet space: €21.97 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 270 × Beams, approx. 360 × 12 × 5 cm - 540 × Locking pins PRICE: €14,240.00 net €16,945.60 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: Nsdpfez Env Sox Ab Uslg - Nationwide delivery by our partner logistics company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams optionally available - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, a renovation, or an extension – we will provide you with expert advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, storage racking systems, and other solutions. Many systems are set up and can be experienced directly. Our specialist consultants will be happy to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company website. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. Nljdpfx Asz Envljb Ujg With a shelf load of 2,000 kg per level and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The offered pallet racking system has a total of 432 pallet spaces, including ground-level spaces. At a total price of €9,870.00 net, this corresponds to a price of only €22.85 net per pallet space. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Shelf load: 2,000 kg per level - Bay load: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground level + 3 beam levels - Pallet spaces: 432, including ground-level spaces - Price per pallet space: €22.85 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 520 × 110 cm, pre-assembled - 162 × Beams, approx. 360 × 12 × 5 cm - 324 × Safety pins PRICE: €9,870.00 net €11,745.30 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optional - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, shelving systems, and other solutions on-site. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many more offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, maximum load weight: 23,900 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 06/2007, Year of construction: 2007, Internal vehicle number: G400178 Available immediately at our yard in Kaufungen Nlodpozahg Djfx Ab Ujg More information: Luis Lucena Viktoria Sologubova Müller-Mitteltal TS2 KOMPAKT low-loader trailer – 2 axles – hydraulic ramps Robust Müller-Mitteltal TS2 KOMPAKT low-loader trailer from 2007. This 2-axle trailer features hydraulic loading ramps, air suspension, and a payload capacity of 23,900 kg. With a permissible gross weight of 31,000 kg, it is ideally suited for transporting heavy construction and industrial machinery. Technical data: * Vehicle number: G400178 * Vehicle condition: Used * Category: Low-loader trailer * Manufacturer: Müller-Mitteltal * Model: TS2 KOMPAKT * First registration: 06/2007 * Year of manufacture: 2007 * Axles: 2 * Permissible gross weight: 31,000 kg * Unladen weight: 7,100 kg * Payload: 23,900 kg * Overall length: 10,800 mm * German vehicle Equipment: * Hydraulic loading ramps * Air suspension * 2-axle chassis * Robust low-loader design Inspection and functional testing possible by prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. We will gladly accept your used vehicle as part of the payment. Financing directly with us is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 1983, Press force: 315 t Stroke: 700 mm Frame width: 1750 mm Shut height (stroke up): 1200 mm Table area: 1600 x 1500 mm Cushion force in table: 125 t Cushion stroke in table: 200 mm Cushion area in table: 1200 x 1500 mm Table height above floor: 750 mm Njdpfszyn Rnsx Ab Uolg Ram area: 1640 x 1500 mm