Used Marelli Voltage Stabiliser for sale (9,538)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 72,318 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR – MWM TBG 620 V16 K (Complete Package) Available MWM TBG 620 V16 K natural gas generator set, offered as a complete package with auxiliaries. The unit has 72,318 running hours from new and was shut down in 2022 while operating at full load. Maintenance All maintenance has been carried out by official service, following the manufacturer’s scheduled maintenance plan. Technical data • Brand / Model: MWM – TBG 620 V16 K • Electrical output: 1,364 kW • RPM: 1,500 rpm • Frequency: 50 Hz • Year of manufacture (YOM): 2004 • Total running hours (since new): 72,318 h • Fuel: Natural Gas • Generator brand: Marelli Generators • Voltage: 400 V Scope of supply (included) • MWM genset • Control cabinet • Auxiliary control cabinets • Gas ramp • Cooling system Njdoytq A Ujpfx Alhjlc • Protection switchgear • Silencer • 3-Way Valve • Documents Status / Availability Availability: Immediate For more information please contact us!

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Njdpfjzcuyiox Alhslc Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Nlsdszdqdfjpfx Alhjc Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Njdpfx Aszb Idrslhjlc Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,297 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! In January 2025, a new spindle was installed by the manufacturer! The machine has been regularly maintained! Previous use: The machine was primarily used for precision machining. Roughing operations were only carried out to a limited extent. TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 2,200 mm Travel range Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) Vertical: 10,000 rpm Spindle speed S1 (continuous operation) Universal swivel head 2-axis: 18,000 rpm Vertical milling head: TVS 10,000 Swivel milling head: TU 18,000 Tool holder: HSK 63 A Tool changer: 40 tool positions MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (-15 %, +10 %) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 99,222 h Program run time: 61,297 h EQUIPMENT High-rigidity gantry design Nledjzb D Aqepfx Alhec Precise linear guides and ball screws Generous working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Swiveling milling head with 4th/5th axis Maintenance and service documentation

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 511902Y01661, Year of construction: 2022, operating hours: 8,090 h, load capacity: 1,400 kg, battery voltage: 48 V, empty load weight: 2,752 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg MACHINE DETAILS Battery weight max./min.: 986 kg / 892 kg Battery voltage: 48 V Drive power: 6.5 kW Dimensions & Weight Dimensions (L x W x H): 2,600 x 1,300 x 3,400 mm Unladen weight: 2,752 kg Operating hours: 8,090 h EQUIPMENT Battery charger Additional battery Nljdpfxezgr Dlo Alhoc Exchange frame for 2nd battery Note: The forklift is 3,400 mm high. The seller cannot disassemble it. The buyer must therefore either collect it with a suitable low-loader or disassemble the forklift themselves.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Njdpfx Ajzcwyljlhelc Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: ready for operation (used), functionality: fully functional, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Turning diameter max.: 660 mm Main spindle Nledpfx Alozgufrohjc Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Torque max.: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Sub spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Torque max.: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Technical documentation Chip conveyor with cooling system 20-position tool magazine B-axis (positioning in 0.001° increments) C-axis Y-axis Angular positioning of the sub spindle Synchronization of main and sub spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Interface for IC memory card

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20355010, functionality: fully functional, cutting height (max.): 135 mm, cutting width (max.): 350 mm, saw blade diameter: 405 mm, spindle speed (max.): 3,800 rpm, table width: 780 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting width: 350 mm Max. saw blade height: 135 mm Min. saw blade diameter: 250 mm Max. saw blade diameter: 405 mm Saw blade bore diameter: 55 mm Min. workpiece length: 650 mm Max. spindle speed: 3,800 rpm Table width: 780 mm Min. feed rate: 7.5 m/min Nodpszdz Riofx Alhslc Max. feed rate: 30 m/min MACHINE DETAILS Conveyor belt motor power: 1.5 kW Conveyor belt width: 355 mm Voltage: 400 V Fuse rating: 63 A Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,700 mm Weight: 1,500 kg Shipping packages: 1

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 441.12.292.18, functionality: fully functional, cutting height (max.): 137 mm, saw blade diameter: 400 mm, spindle speed (max.): 4,000 rpm, table width: 1,300 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 137 mm Max. saw blade diameter: 400 mm Saw blade arbor diameter: 30 mm Parallel fence travel: 1,300 mm Roller table length: 3,200 mm Table width: 1,300 mm Saw unit tilt: 0 - 45° Spindle speed, pre-cutter: 8,200 rpm Pre-cutter saw blade diameter: 120 mm Max. spindle speed: 4,000 rpm Nodjzdz N Ejpfx Alhjlc MACHINE DETAILS Main motor power: 5.5 kW Voltage: 400 V Current consumption: 11 A Fuse: 16 A Power: 5.5 kW Dust extraction nozzle diameter: 120 mm Dimensions & Weight Dimensions (L x W x H): 3,250 x 1,000 x 1,100 mm Shipping weight: 650 kg Shipping packages: 1 EQUIPMENT Scoring saw CE marking Controlled axes: Parallel fence, cutting height, swivel, scoring saw height Manually adjustable axes: Parallel fence, cutting height, swivel, scoring saw height

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 5014 BP, functionality: fully functional, cutting height (max.): 1,600 mm, saw blade diameter: 250 mm, empty load weight: 500 kg, cutting depth: 55 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height, vertical: 1,600 mm Max. cutting height, horizontal: 1,550 mm Max. cutting depth: 55 mm Max. saw blade diameter: 250 mm Nedpfxszdzy Ro Alhslc Arbor hole saw blade diameter: 30 mm MACHINE DETAILS Voltage: 400 V Current consumption: 6.6 A Fuse: 16 A Power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,200 x 2,450 mm Weight: 500 kg Transport packages: 1 EQUIPMENT Horizontal cutting Vertical cutting

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, feed rate X-axis: 24 m/min, working width: 1,100 mm, grinding belt length: 1,890 mm, grinding belt width: 1,100 mm, empty load weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! Nljdpjzdzrasfx Alhjc TECHNICAL DETAILS Number of units: 3 Unit 1 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,100 mm Roller diameter: 260 mm Roller material: Rubber Motor power: 18.5 kW Unit 2 Position: Top Unit type: Sanding shoe Sanding belt length: 1,890 mm Sanding belt width: 1,100 mm Roller diameter: 100 mm Roller material: Steel Motor power: 15 kW Unit 3 Position: Top Unit type: Brush unit Roller diameter: 140 mm Motor power: 0.55 kW Max. working width: 1,100 mm Infeed table length: 620 mm Outfeed table length: 1,200 mm Feed motor: 1.5 kW Feed speed: Manual Min. feed speed: 1 m/min Max. feed speed: 24 m/min Feed speed control: Stepless MACHINE DETAILS Voltage: 400 V Power: 36 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,800 x 2,450 mm Empty weight: 3,500 kg Transport packages: 2 Operating hours: 12,542 h

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15600600437, cutting height (max.): 130 mm, cutting width (max.): 470 mm, saw blade diameter: 550 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 130 mm Max. cutting width at 90°: 470 mm Max. saw blade diameter: 550 mm Saw blade tiltable up to: 45° MACHINE DETAILS Main motor power: 5.5 kW Njdpfx Ajzdzmqolhelc Voltage: 400 V Current consumption: 12 A Fuse: 16 A Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,600 x 1,700 mm Weight: 500 kg Transport packages: 1

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Nodpfx Aszdzmkelhjlc Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 8737, saw blade diameter: 500 mm, cutting width (max.): 300 mm, empty load weight: 1,100 kg, TECHNICAL DETAILS Max. cutting width: 300 mm Min. saw blade diameter: 490 mm Max. saw blade diameter: 500 mm Arbor saw blade diameter: 30 mm Infeed table length: 7,000 mm Outfeed table length: 2,000 mm Nedpfx Alozdzkiehslc MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 10,000 x 1,800 x 1,700 mm Weight: 1,100 kg Shipping packages: 3 Voltage: 400 V Power consumption: 20 A Fuse: 32 A EQUIPMENT Automatic feed system

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,316 h, functionality: fully functional, machine/vehicle number: 11080297, travel distance X-axis: 1,100 mm, travel distance Y-axis: 585 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 585 mm Travel range, Z-axis: 600 mm Spindle speed (max.): 8,000 rpm Spindle type: SK 40 Number of tool positions in the tool magazine: 30 Nljdezd Aigopfx Alhjc MACHINE DETAILS Control system: Heidenhain TNC530i Input voltage: 400 V Total weight: 7,000 kg Operating hours (according to image) Control system operating hours: 42,480 h Machine operating hours: 38,123 h Spindle operating hours: 12,316 h EQUIPMENT Documentation/Manual Chip conveyor Electronic handwheel

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,877 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, controller model: Fanuc MGS-501, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 730 mm Rapid traverse rate, X-axis: 50 m/min Rapid traverse rate, Y-axis: 50 m/min Rapid traverse rate, Z-axis: 50 m/min Maximum workpiece height: 900 mm Maximum workpiece diameter: 730 mm Maximum workpiece weight: 500 kg Table dimensions: 500 x 500 mm Table load capacity: 500 kg Maximum spindle speed: 8,000 rpm Distance from table center to spindle nose: 100 mm Number of spindles: 1 Torque: 302 Nm Number of tool positions in the tool magazine: 60 Tool length: 500 mm Tool diameter: 120 mm Tool weight: 30 g Nedpfxozcla Hj Alhjlc Tool holder type for turret 1: ISO 50 MACHINE DETAILS Control system: Fanuc MGS-501 Rated apparent power: 73 kVA Input voltage: 380 V Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,595 x 2,770 mm Total weight: 13,200 kg Operating hours (according to diagram): 28,877 h Power-on time (according to diagram): 94,850 h EQUIPMENT CE marking Documentation/Manual Spindle speed infinitely adjustable Chip conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Nljdpozd Afzofx Alhjc Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91045841, Year of construction: 2007, load capacity: 2,000 kg, load center: 600 mm, fuel type: electric, battery voltage: 48 V, TECHNICAL DETAILS Load capacity: 2,000 kg Load center: 600 mm Nljdpfx Alezd Rukjhoc MACHINE DETAILS Mast model: ZG 560DZ Drive type: Electric drive Battery voltage: 48 V Drive power: 6.0 kW Unladen weight without battery: 3,392 kg Battery weight: 890–984 kg EQUIPMENT Driver's seat Sensitive hydraulics Very maneuverable Ideal for high-bay warehouses Robust Jungheinrich technology Precise control

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 101.116, Year of construction: 2001, operating hours: 2,133 h, load capacity: 9,000 kg, lifting height: 3,000 mm, free lift: 200 mm, load center: 600 mm, mast type: duplex, TECHNICAL DETAILS Load capacity: 9,000 kg (up to 10 tons can be lifted temporarily) Lifting height: 3,000 mm Free lift: 200 mm Load center: 600 mm Overall height: 2,480 mm Fork length: 1,650 mm Fork width: 150 mm Fork thickness: 70 mm Turning radius (outer): 2,900 mm MACHINE DETAILS Nlodpfx Aljzd Sg Ushsc Fuel type: Gas Mast type: Duplex Engine manufacturer: Perkins Transmission type: Hydrostatic Power: 55 kW (74.78 hp) Engine speed: 2,300 rpm Front tire type: Solid rubber tires (non-marking) Rear tire type: Solid rubber tires (non-marking) Hydraulic tank: 120 liters Operating voltage: 12 V Noise level: approx. 85 dB(A) Dimensions & Weight Length (to backrest): 3,050 mm Width: 1,550 mm Wheelbase: 1,950 mm Unladen weight: 14,500 kg Max. travel speed: 10 km/h Gradeability: 15% Operating hours: 2,133 h EQUIPMENT Trailer coupling Lighting CE marking Complete documentation including spare parts list Cabin Pallet forks Side shifter UVV (German accident prevention regulations) Hydraulically adjustable cabin Swivel column with telescopic boom Integrated winch AM/FM radio 3 switchable cameras with monitor Digital weighing system Pfreundt WK33 Joystick control Comfort seat Excellent all-around visibility

Condition: new, functionality: fully functional, fuel type: gas, power: 1,521 kW (2,067.98 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 10 pcs in stock =Scope of supply= Genset mtu 12V4000L64FNER, 400 V for operation with Natural Gas. gas train of 116-250 mbar inlet pressure with 1m flexible rubber-metal connecting hose. set of sylomer stripes for genset foundation installation. set of flexible connection for engine coolant circuit with flange connection set of flexible connection for mixture coolant circuit with flange connection set of exhaust bellows with flange connection and companion flange set Maintenance-free starter batteries, mounted on base frame. MIP (MTU Interface Panel) incl. Black Start option and ECU Remote Control interface =Technical specifications= Time for delivery - in stock Engine type - mtu 12V4000L64FNER Electrical power - 1521 kW Engine speed - 1500 rpm Electrical efficiency - 43.9 % Total efficiency - 88.6 % Alternator type - Leroy Somer LSA 53.2 VL6 Voltage - 400 V Frequency - 50 HZ < 500mg NOx at 5% O2 Nedpoy Hcvbefx Alhjlc =Other information= Production country - Germany

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 400 l, color: orange, emission class: euro5, total length: 9,400 mm, total width: 2,470 mm, total height: 3,150 mm, Year of construction: 2023, Equipment: air conditioning, central locking, cruise control, - Compressor - Daytime running light - Spare wheel - Tachograph Country of origin: Germany Displacement: 13,000cc Torque: 230Nm TORQUE Dimension: 9,440 x 2,470 x 3,150 Brakes: DRUM BREAKER + ELECTRONIC BRAKE SYSTEM (EBS) + ANTI-LOCK BREAKING SYSTEM(ABS) + FULL BREAK ASSISTANT Steering: LH DRIVE Construction: Chassis wheelbase: Front 1795mm, Rear 1400mm BATTERY 12 V,175 Ah 2 UNITS MAIN BATTERY SWITCH ELECTRIC SAFETY CUT-OUT LOCKABLE BATTEY BIX WITH PADLOCK GUARD PLATE FOR TANKS FUEL TANK RIGHT STEEL ADBLUE TANK CAPACITY 35L LEFT FULL TANK CAP LOCKABLE FOR MASTER KEY SYSTEM PROVISIONALLY MOUNTED 1-CYLINDER 360ccm COMPRESSED-AIR TREATMENT PNEUMATICALLY CONROLLED MAN EASY START IMMOBILISER REAR LIGHTS ENGINE OIL DIPSTICK AND DIGITAL OIL LEVEL GUAGE SINGLE-DISC CLUTCH 430mm DRY REINFORCED (LONG LIFE) DRIVELINE PROPSHAFT,REINFORCED PROPSHAFT 2nd REAR AXLE REINFORCED STEERING OIL TANK WITH ELECTRICAL MEASURING SENSOR AXLE RATIO I = 4.00 DIFFERENTIAL LOCKS ON DRIVEN REAR AXLES COMPRESSED-AIR CONNECTION CAB JACK 12,000 KG SUSPENSION TYPE FOR FRONT AXLES AND DRIVEN REAR AXLES LEAF/LEAF (BB) LEAF-SPRING SUSPENSION ON FRONT AXLE PARABOLIC 4-LEAF STEEL LEAF-SPRING SUSPENSION ON 2ND FRONT AXLE PARABOLIC 4-LEAF STEEL LEAF-SPRING SUSPENSION ON REAR AXLE TRAPEZOIDAL STEEL LEAF-SPRING SUSPENSION ON 2ND REAR AXLE TRAPEZOIDAL STEEL SPRING LOAD-BEARING CAPACITY FRONT AXLE 9,500 KG SPRING LOAD-BEARING CAPACITY OF 2ND FRONT AXLE 9,500 KG SPRING LOAD-BEARING CAPACITY OF REAR AXLE 16,000 KG SPRING LOAD-BEARING CAPACITY OF 2ND REAR AXLE 16,000 KG STABILISER FRONT AXLE STABILISER 2ND FRONT AXLE STABILISER REAR AXLE STABILISER 2ND REAR AXLE CAB TILT MECHANISM MANUAL WINDSCREEN COMPOSITE SAFETY GLASS TINTED SUNBLIND IN FRONT OF WINDSCREEN WIPER SYSTEM FOR WINDSCREEN WITH REMOTE CONTROL DOOR WINDOWS TINTED STONE PROTECTION FOR FRONT HEADLIGHTS LED FOG LIGHTS H7 CORNERING LIGHTS H7 TURN SIGNAL LIGHTS SIDES LED HEADLIGHT BEAM REGULATOR COMPRESSED-AIR HORN 2UNITS CAB ROOF 2 REVOLVING BEACONS ON CAB ROOF 1 RIGHT AND 1 LEFT PREPARATION FOR LOADING AREA LIGHTNING EXTERIOR REAR-VIEW MIRROR ELECTRICALLY ADJUSTABLE SEAT COVERS FABRIC COMFORT DRIVER'S SEAT ARM RESTS STORAGE SPACE IN SEAT BRACKET OF CO DRIVER'S SEAT MULTI-FUCTION STEERING WHEEL ADJUSTABLE HEIGHT AND ANGLE STERRING WHEEL WITH PARKING POSITION STEERING LOCK CONTINENTAL SOCKET CAB CENTRE 2 UNITS 12 V & 24 V MANUAL WINDSCREEN ROLLER BLIND INTERNAL HAZARD WARNING LIGHT 1 UNITS WITH CONTINOUS LIGHT FUNCTION ROAD SPEED LIMITER ADJUSTABLE LIMITER (ENGINE SPEED REGULATION) MAN LOUD SPEAKER SYSTEM STORAGE BOX CAB REAR WALL 2 UNITS STONE PROTECTION FOR REAR LIGHTS GUARD WIDE MESH REVERSING WARNING SYSTEM Nlodpfx Aloy Tykcehsc SIDE MARKER LIGHTS LED ANTI-NOISE SKIRT ENGINE RADIATION PROTECTION LOWER ANTI FREEZE DOWN TO -32c EMERGENCY STEERING PUMP VEHICLE TOOL KIT FIRST AID KIT WARNING TRIANGLE 1 UNITS ELECTRONIC STABILITY PROGRAM ( ESP) ANTI-SLIP CONTROL (ASR) CC)...

Condition: new, power: 74 kW (100.61 HP), emission class: euro2, Year of construction: 2026, Country of origin: UK Displacement: 4,400cc Gearbox type: 29kph, 4 Speed, 2/4 Wd Disconnect Engine: Jcb 74.2kw 100hp,Tier 2 Transmission: 29kph 4 Speed 2/4 Wd Disconnect Sway & Stabiliser Legs Hydraulics: Gear Pump Hydraulics 170 Litres/Minuteute Servo Controls Joystick Carriage Tilt On Secondary Servo Lever Jcb Sitemaster: 15.5-25 Type/Pattern: Hrc- Hot Climate Load Speed Rating: 168a2 Inset/Outset: 32 Inset Servo Joystick-1 Aux Cab: Fully Glazed -Including Heater Mechanical Suspension Seat: Fabric Adjustable Back Rest Weight Fore/Aft Q-Fit 'Clear View' Carriage - Manual Pin Lock Language Pack: Middle East-English English Operators Manual Road Lights: Left Hand Dip With Fog & Reverse Light Clear View Forks & Bar: 1067l X 100w X 50t = More information = Transmission: 4 gears Engine capacity: 4.400 cc Empty weight: 8.160 kg Nlsdpfsy Tydcox Alhsc Carrying capacity: 4.000 kg GVW: 12.160 kg Make of engine: JCB Fork dimensions: 1,06 x 100 mm Top speed: 29 km/h

Condition: new, Year of construction: 2025, STATIONARY CONCRETE BATCHING PLANT S130-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Nodpjflz Idefx Alhjlc Plant Capacity : 130m³/hour freshly compressed concrete Mixer Capacity : 4500/3000 lt (3m³ Compressed Concrete) Total Motor Power : 168kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 130 m³/h Air Compressor Capacity : 1300 lt/min Aggregate Hopper : 4 Bins:4×30 = 120m³ Mixer Type : TWIN Shaft (3m³). 4500/3000 lt capacity Aggregate Conveyor Band : 1000 mm * 32000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: like new (used), Year of construction: 2015, operating hours: 13,000 h, machine/vehicle number: EWADC22C-XS003, cooling capacity: 2,000 kW (2,719.24 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 46 °C, ambient temperature (min.): 35 °C, TECHNICAL SPECIFICATIONS Brand: DAIKIN Model: EWADC22C-XS003 Cooling Performance Cooling Capacity: 1933 kW Cooling Capacity (Kcal/h): 1,720,000 Kcal/h Energy Efficiency Ratio (EER): 2.63 Seasonal Energy Efficiency Ratio (ESEER): 4.02 Nledpfx Asuma Thjlhjc IPLV (Integrated Part Load Value): 4.47 Evaporator Type: Shell & Tube (Direct expansion) Max. Water Side Operating Pressure: 10 bar Water Volume: 850 liters Nominal Water Flow: 92.2 l/s Water Inlet/Outlet Temperature: 12.0°C / 7.0°C Connection Diameter: 273 mm Insulation Material: Closed cell Condenser Type: Aluminum finned, internally grooved copper tubes Fan Type: Propeller type, glass fiber reinforced resin Fan Diameter: 800 mm Number of Fans: 30 Fan Motor Power: 52.5 kW Fan Speed: 900 rpm Nominal Air Flow: 160,327 l/s Compressor Type: Asymmetric single screw, semi-hermetic Model: 3 x HSA2690524 Quantity: 3 Oil Charge: 75 liters Control Mode: Stepless modulation (25% – 100%) Start Method: Star-Delta (Y-Δ) Refrigerant Type: R-134a Charge Amount: 360 kg Number of Circuits: 3 Dimensions and Weight Width: 2,285 mm Length: 14,785 mm Height: 2,540 mm Unit Weight: 12,600 kg Operating Weight: 13,470 kg Electrical Specifications Voltage: 400V / 3 Phase / 50 Hz Voltage Tolerance: 10% Nominal Running Current: 1100 A Max Starting Current: 1486 A Max Current for Wire Sizing: 1608 A Control and Automation Control Panel: MicroTech III Remote Monitoring: Modbus RTU, BACnet/IP, LonWorks, TCP/IP Temperature Regulation Accuracy: 0.1 °C Advanced Protection: High/low pressure, oil pressure, motor temperature, freeze protection, phase monitoring Sound Level Sound Power: 104 dB(A) Sound Pressure: 81 dB(A) 1 meter distance